近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Wang L, Martínez J A I, Ulliac G, et al. Non-reciprocal and Non-Newtonian Mechanical Metamaterials. Nature Communications, 14, 4778 (2023). https://doi.org/10.1038/s41467-023-40493-6
Liu A, Zou Y, Chen Y, et al. Experimental investigation of impact resistance and compression behavior of CF/PEEK laminates after hot‐press fusion repair with different stacking sequences. Polymer Composites.
Liu X, Tan X, Wang B, et al. Research on hierarchical cylindrical negative stiffness structures’ energy absorption characteristics. Smart Materials and Structures, 2023, 32(8): 085027.
Chen S, Lian X, Zhu S, et al. A Re-usable Negative Stiffness Mechanical Metamaterial Composed of Bi-material Systems for High Energy Dissipation and Shock Isolation. Composite Structures, 2023: 117366.
Li S, Li G, Lian X, et al. Integrated porous polyetheretherketone/hydroxyapatite scaffolds: design, manufacturing and performance evaluation. Composites Part A: Applied Science and Manufacturing, 2023: 107656.
Tan X, Li Y, Wang L, et al. Bioinspired flexible and programmable negative stiffness mechanical metamaterials. Advanced Intelligent Systems, 2023: 2200400.
Ji C, Hu J, Sadighi M, et al. Experimental and theoretical study on residual ultimate strength after impact of CF/PEEK-titanium hybrid laminates with nano-interfacial enhancement. Composites Science and Technology, 2023, 232: 109871.
Chen R, Zhang J, Chen H, et al. Toughening mechanism of phthalonitrile polymer: MD simulation and experiment. Composites Science and Technology, 2023, 232: 109841.
Liu A, Chen Y, Hu J, et al. Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates. Polymer Composites, 2022, 43(11): 8136-8151.
Wang LC, Ulliac G, Wang B, et al. 3D Auxetic Metamaterials with Elastically-Stable Continuous Phase Transition. Advanced Science, 2022, 2204721. https://doi.org/10.1002/advs.202204721
Tan X, Martínez J A I, Ulliac G, et al. Single‐Step‐Lithography Micro‐Stepper Based on Frictional Contact and Chiral Metamaterial. Small, 2022, 18(28): 2202128. https://doi.org/10.1002/smll.202202128
Hu J, Ji C, Chen S, et al. Two-position impact behavior and interference mechanism of CFF/PEEK thermoplastic composites. International Journal of Mechanical Sciences, 2022, 232: 107644.
Hu J, Zhang H, Li S, et al. Process parameter–mechanical property relationships and influence mechanism of advanced CFF/PEEK thermoplastic composites. Polymer Composites, 2022,43(8): 5119.
Tan X, Wang L, Zhu S, et al. A general strategy for performance enhancement of negative stiffness mechanical metamaterials. European Journal of Mechanics-A/Solids, 2022, 96: 104702.
Ji C, Guo J, Hu J, et al. Enhanced interfacial adhesion of CF/PEEK-titanium hybrid laminates via introducing micro-nano layers with multi-walled carbon nanotube networks. Composites Science and Technology, 2022, 223: 109418.
Chen S, Tan X, Hu J, et al. Continuous carbon fiber reinforced composite negative stiffness mechanical metamaterial for recoverable energy absorption. Composite Structures, 2022, 288: 115411.
Tan X, Wang B, Wang L, et al. Effect of beam configuration on its multistable and negative stiffness properties. Composite Structures, 2022, 286: 115308.
Zhu S, Wang B, Chen L, et al. Enhance the energy dissipation ability of sleeve-type negative stiffness structures via a phase-difference mechanism. International Journal of Mechanical Sciences, 2022, 213: 106803.
Li S, Wang T, Hu J, et al. Effect of hydroxyapatite content and particle size on the mechanical behaviors and osteogenesis in vitro of polyetheretherketone–hydroxyapatite composite. Polymer Composites, 2021, 42(12): 6512-6522.
Li S, Li G, Hu J, et al. Porous polyetheretherketone-hydroxyapatite composite: A candidate material for orthopedic implant. Composites Communications, 2021, 28: 100908.
Li S, Wang T, Hu J, et al. Surface porous poly-ether-ether-ketone based on three-dimensional printing for load-bearing orthopedic implant. Journal of the Mechanical Behavior of Biomedical Materials, 2021, 120: 104561.
Wang L, Tan X, Zhu S, et al. Directional instability-driven strain-dependent 3D auxetic metamaterials. International Journal of Mechanical Sciences, 2021, 199: 106408.
Chen S, Tan X, Hu J, et al. A novel gradient negative stiffness honeycomb for recoverable energy absorption. Composites Part B: Engineering, 2021, 215: 108745.
Ji C, Chen Y, Yang J, et al. Dent-repaired fatigue performance and life prediction of thin sheet specimens under coupled multi-stage damage with impact and pre-fatigue. International Journal of Fatigue, 2021, 146: 106148.
Chen Z, Wang B, Pan S, et al. Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model. Composites Communications, 2021, 28: 100978.
Wang L, Zhu S, Wang B, et al. Latitude-and-longitude-inspired three-dimensional auxetic metamaterials. Extreme Mechanics Letters, 2021, 42: 101142.
Zhang H, Wang B, Hu J, et al. Curing behavior studies of phenol-containing phthalonitrile monomer for advanced composite materials. Thermochimica Acta, 2021, 696: 178837.
Zhu S, Wang B, Tan X, et al. A novel bi-material negative stiffness metamaterial in sleeve-type via combining rigidity with softness. Composite Structures, 2021, 262: 113381.
Ji C, Hu J, Wang B, et al. Mechanical behavior prediction of CF/PEEK-titanium hybrid laminates considering temperature effect by artificial neural network. Composite Structures, 2021, 262: 113367.
Hu J, Zhu S, Wang B, et al. Fabrication and compression properties of continuous carbon fiber reinforced polyether ether ketone thermoplastic composite sandwich structures with lattice cores. Journal of Sandwich Structures & Materials, 2021, 23(6): 2422-2442.
Tan X, Chen S, Wang B, et al. Real-time tunable negative stiffness mechanical metamaterial. Extreme Mechanics Letters, 2020, 41: 100990.
Hu J, Ji C, Chen S, et al. Novel Mathematical-Statistical Models for the Distribution of Fatigue Life and Residual Strength for Fiber Reinforced Polymer Composites. International Journal of Applied Mechanics, 2020, 12(09): 2050104.
Jiqiang Hu, Ankang Liu, Shaowei Zhu, Hanqi Zhang, Bing Wang*, Huayong Zheng, Zhengong Zhou. Novel panel-core connection process and impact behaviors of CF/PEEK thermoplastic composite sandwich structures with truss cores. Composite Structures, 2020, 251: 112659.
Shaowei Zhu, Jiqiang Hu, Xiaojun Tan, Bing Wang*, ShuaiChen, LiMa. Mechanics of Sandwich Panels with a Buckling-dominated Lattice Core: The Effects of The Initial Rod Curvatures. Composite Structures, 2020, 251: 112669.
Hanqi Zhang, Bing Wang*, Yanna Wang, Heng Zhou. Novolac/Phenol-Containing Phthalonitrile Blends: Curing Characteristics and Composite Mechanical Properties. Polymers, 2020, 12(1): 126.
Jiqiang Hu, Fei Li, Bing Wang,*, Hanqi Zhang, Chunming Ji, Shixun Wang, Zhengong Zhou. A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: The liquid-phase oxidation followed by grafting of silane coupling agent. Composites Part B: Engineering, 2020, 191: 107966.
Ji C, Wang B*, Hu J, et al. Effect of different preparation methods on mechanical behaviors of carbon fiber-reinforced PEEK-Titanium hybrid laminates. Polymer Testing, 2020, 85: 106462.
XJ Tan, SW Zhu, B Wang*, KL Yao, S Chen, PF Xu, LC Wang, Yuguo Sun. Mechanical response of negative stiffness truncated-conical shell systems: experiment, numerical simulation and empirical model. Composites Part B: Engineering, 2020, 188: 107898.
Liu A, Wang B*, Li F. High performance thermoplastic polymer for the compressive behaviour of carbon fibre reinforced composites. Pigment & Resin Technology, 2020.
Zhu S, Tan X, Chen S, Wang Bing*. Quasi‐All‐Directional Negative Stiffness Metamaterials Based on Negative Rotation Stiffness Elements. Physica Status Solidi (b), 2020, 257(6): 1900538.
Shuai Chen, Bing Wang*, Shaowei Zhu, Xiaojun Tan, Jiqiang Hu, Xu Lian, Lianchao Wang, Linzhi Wu. A Novel Composite Negative Stiffness Structure for Recoverable Trapping Energy. Composites Part A: Applied Science and Manufacturing, 2020, 129: 105697.
Xiaojun Tan, Bing Wang*, Yongtao Yao, Kaili Yao, Yuying Kang, Shaowei Zhu, Shuai Chen, Peifei Xu. Programmable Buckling-based Negative Stiffness Metamaterial. Materials Letters, 2020, 262: 127072.
Hang Yang, Bing Wang, Li Ma*. Mechanical properties of 3D double-U auxetic structures. International Journal of Solids and Structures. 2019. 180-181:13-29
Hang Yang, Bing Wang, Li Ma*. Designing hierarchical metamaterials by topology analysis with tailored Poisson’s ratio and Young’s modulus. Composite Structures. 2019, 214:359-378.
Xiaojun Tan, Bing Wang*, Kaili Yao, Shaowei Zhu, Shuai Chen, Peifei Xu, Lianchao Wang, Yuguo Sun. Novel multi-stable mechanical metamaterials for trapping energy through shear deformation. International Journal of Mechanical Sciences, 2019, 164: 105168.
Xiaojun Tan, BingWang*, Shaowei Zhu, Shuai Chen, Kaili Yao, Peifei Xu, Linzhi Wu, Yuguo Sun. Novel multidirectional negative stiffness mechanical metamaterials. Smart Materials and Structures, 2019, 29(1): 015037.
Shuai Li, Tengteng Zheng, Qi Li, Yingcheng Hu*, Bing Wang*. Fabrication, flexural, and energy absorption properties of natural fiber-reinforced epoxy composites. Composites Communications. 2019,16:124-131.
ShaoweiZhu, XiaojunTan, BingWang*, ShuaiChen, JiqiangHu, LiMa, LinzhiWu. Bio-inspired multistable metamaterials with reusable large deformation and ultra-high mechanical performance. Extreme Mechanics Letters, 2019, 32: 100548.
Bing Wang*, Xiaojun Tan, Shaowei Zhu , Shuai Chen, Kaili Yao , Peifei Xu, Lianchao Wang, Huaping Wu , Yuguo Sun. Cushion performance of cylindrical negative stiffness structures: Analysis and optimization. Composite Structures, 2019, 227: 111276. .
Xiaojun Tan, Shuai Chen, Bing Wang*, Shaowei Zhu, Linzhi Wu, Yuguo Sun. Design fabrication, and characterization of multistable mechanical metamaterials for trapping energy. Extreme Mechanics Letters, 2019, 28:8-21
Xiaojun Tan , Shuai Chen , Shaowei Zhu , Bing Wang*, Peifei Xu , Kaili Yao , Yuguo Sun. Reusable Metamaterial via Inelastic Instability for Energy Absorption. International Journal of Mechanical Sciences, 2019, 155: 509-517.
Xiaojun Tan, BingWang*, Shuai Chen, ShaoweiZhu, Yuguo Sun. A Novel Cylindrical Negative Stiffness Structure for Shock Isolation, Composite Structures. 2019，214;397-405.
Hanhua LI，Yongtao Yao, Liuyu Guo, Qiuhua ZHANG, Bing WANG*. The Effects of delamination deficiencies on compressive mechanical properties of reinforced composite skin structures. Composites Part B: Engineering, 2018，155:138-147
YongtaoYao, YunLuo, YunchengXu, BingWang, JinyangLi, HanDeng, HaibaoLu. Fabrication and characterization of auxetic shape memory composite foams. Composites Part B: Engineering,2018, 152: 1-7
Bing Wang, JiQiang Hu,YanQi Li, YongTao Yaoa, ShiXun Wang, Li Ma. Mechanical properties and failure behavior of the sandwich structures with carbon ？ber-reinforced X-type lattice truss core. Composite Structures. 2018，185;619-633.
ZHU Shaowei, MA Li, WANG Bing*, HU Jiqiang, ZHOU Zhengong . Lattice Materials Composed by Curved Struts Exhibit Adjustable Macroscopic Stress-Strain Curves. Materials Today Communications.2018, 14:273-281.
Xin-Tao Wang, Bing Wang, Zhi-Hui Wen, Li Ma. Fabrication and mechanical propertiesof CFRP composite three-dimensional double-arrow-head auxetic structures. Composites Science and Technology.2018,164:92-102
Yongtao Yao, Yun Luo, Haibao Lu, Bing Wang*. Remotely actuated porous composite membrane with shape memory property. Composite Structures. 2018,192;507-515.
Yang Chen,Leiting Dong, Bing Wang, Yuli Chen,Zhiping Qiu, Zaoyang Guo. A substructure-based homogenization approach for systems with periodic microstructures of comparable sizes. Composite Structures. 2017,169;97-104
Yihua Mo，Gengdong Cheng，Bing Wang*，Xiaohong Wang. The effects of delamination deficiencies on compressive properties of composite grid stiffened structures. Mechanics of advance materials and structures. 2018,25（11:901-916
Meirong Hao, Yingcheng Hu, Bing Wang, Shuo Liu. Mechanical behavior of natural fibers based isogrid lattice cylinder. Composite Structures. 2017,176: 117-123
Xin-Tao Wang, Bing Wang, Xiao-Wen Li, Li Ma. Mechanical properties of 3D re-entrant auxetic cellular structures. International Journal of Mechanical Sciences. 2017, 131-132:396-407.
Hongjun Yu, Bing Wang*. Stress intensity factor evaluations for a curved crack in orthotropic particulate composites using an interaction integral method. Mechanics of advance materials and structures. https://doi.org/10.1080/15376494.2017.1410904
Mingmin Jin, Yingcheng Hu, Bing Wang. Compressive and bending behaviours of wood-based two-dimensional lattice truss core sandwich structures. Composite Structures, 2015,124: 337-344.
Bing Wang, Guoqi Zhang, Qilin He, Li Ma , Linzhi Wu , Jicai Feng. Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores. Materials and Design, 2014,55:591-596.
Guoqi Zhang, Bing Wang, Li Ma, Linzhi Wu, Shidong Pan, Jinshui Yang. Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels. Composite Structures, 2014, 108:304-310.
Bing Wang, Guoqi Zhang, Shixun Wang, Li Ma, Linzhi Wu. High velocity impact response of composite lattice core sandwich structures. Applied Composite Materials. 2014, 21:377-389.
Jian Xiong, Bing Wang, Li Ma, Jim Papadopoulos, Ashkan Vaziri, Linzhi Wu. Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining. Experimental Mechanics, 2014, 54:405-412.
Jia Lou, Linzhi Wu, Li Ma, Jian Xiong, Bing Wang. Effects of local damage on vibration characteristics of composite pyramidal truss core sandwich structure. Composites Part B: Engineering, 2014, 62:73–87.
Bing Wang, Jian Xiong, Xiaojun Wang, Li Ma , Guo-Qi Zhang, Lin-Zhi Wu , Ji-Cai Feng. Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact. Materials and Design. 2013, 50:140-148
Guoqi Zhang, Bing Wang, Li Ma, Jian Xiong, Linzhi Wu. Response of sandwich structures with pyramidal truss cores under the compression and impact loading. Composite Structures. 2013,100: 451–463
Guoqi Zhang, Bing Wang, Li Ma, Jian Xiong, Linzhi Wu. The residual compressive strength of impact-damaged sandwich structures with pyramidal truss cores. Composite Structures.2013, 105, 188–198
Jia Lou, Bing Wang, Li Ma, Lin-Zhi Wu. Free vibration analysis of lattice sandwich beams under several typical boundary conditions. Acta Mechanica Solida Sinica.2013,26(5): 458–467
Jinshui Yang, Jian Xiong, Li Ma, Bing Wang, Guoqi Zhang, Linzhi Wu. Vibration and damping characteristics of hybrid carbon fiber composite pyramidal truss sandwich panels with viscoelastic layers. Composite Structures. 2013; 106: 570-580.
吴林志, 熊健, 马力, 王兵, 张国旗, 杨金水. 新型复合材料点阵结构的研究进展. 力学进展. 2012, 42(1):41-67.
Guo-Qi Zhang, Li Ma, Bing Wang, Lin-Zhi Wu. Mechanical behaviors of CFRP sandwich structures with tetrahedral lattice truss cores. Composites Part B: Engineering, 2012, 43(2):471-476.
Jia Lou, Bing Wang, Li Ma, Lin-Zhi Wu. Three-point Bending Properties of Composite Lattice Sandwich Structures with Tetrahedral Truss Cores. International Journal of Aerospace and Lightweight Structures. 2012, 2(2):1-10.
Jia Lou, Bing Wang, Li Ma, Lin-Zhi Wu. Buckling of carbon fiber composite pyramidal truss core sandwich column. Journal of Harbin Institute of Technology (New Series). 2012, 19(5):99-106
吴林志, 熊健, 马力, 王兵, 泮世东, 刘海涛. 轻质夹层多功能结构一体化设计. 力学与实践, 2012,34(4): 8-18.
王兵，冯吉才，李庆飞, 吴林志, 马力. 纤维柱增强泡沫夹芯的等效力学性能研究. 哈尔滨功业大学学报.2012,44（3）29-33.
Bing Wang, Lin-Zhi Wu, Li Ma, Ji-Cai Feng. Low-velocity impact characteristics and residual tensile strength of carbon fiber composite lattice core sandwich structures. Composites Part B: Engineering, 2011, 42(4):891-897.
Ming Li, Linzhi Wu, Li Ma, Bing Wang, Zhengxi Guan. Structural response of all-composite pyramidal truss core sandwich columns in end compression. Composite Structures. 2011, 93(8):1964-1972.
Ming Li, Linzhi Wu, Li Ma, Bing Wang, Zhengxi Guan. Mechanical response of all-composite pyramidal lattice truss core sandwich structures. Journal of Materials Science & Technology. 2011, 27(6):570-576.
Ming Li, Linzhi Wu, Li Ma, Bing Wang, Zhengxi Guan. Structural design of pyramidal truss core sandwich beams loaded in 3-point bending. Journal of Mechanics of Materials and Structures. 2011, 6(9-10):1255-1266.
Peiwei Zhang, Huaping Wu, Bing Wang. Time-harmonic P-waves engulfing a rectangular limited-permeable crack in piezoelectric medium: energy density and energy release. Theoretical and Applied Fracture Mechanics. 2011,55:169–184
Ma, Li; Li, Ming; Wang Bing; Mechanical behaviors of carbon fiber reinforced composite truss core sandwich structures. 11th International Conference on the Mechanical Behavior of Materials . 2011.
Bing Wang, Lin-Zhi Wu, Xin Jin, Shan-Yi Du, Yu-Guo Sun, Li Ma. Experimental investigation of 3D sandwich structure with core reinforced by composite columns. Materials and Design. 2010, 31(1):158-165.
Bing Wang, Lin-Zhi Wu, Li Ma, Yu-Guo Sun, Shan-Yi Du. Mechanical behavior of the sandwich structures with carbon fiber-reinforced pyramidal lattice truss core. Materials and Design. 2010, 31(5): 2659-2663.
Jian Xiong, Li Ma, Linzhi Wu, Bing Wang, Ashkan Vaziri. Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures. Composite Structures. 2010, 92(11): 2695-2702.
王兵，吴林志，杜善义，孙雨果，马力. 碳纤维增强金字塔点阵夹芯结构的抗压缩性能. 复合材料学报. 2010, 27(1):133-138.
Bing Wang, Lin-Zhi Wu, Li Ma, Qiang Wang, Shan-Yi Du. Fabrication and testing of carbon fiber reinforced truss core sandwich panels. Journal of Materials Science & Technology. 2009,25(4):547-550.
Huaping Wu, Linzhi Wu, Bing Wang, Hongjun Yu, Shanyi Du. Effective Biaxial Modulus and Strain Energy Density of Ideally (h k l)-Fiber-Textured Hexagonal, Tetragonal and Orthorhombic Films. Applied Surface Science. 2008, 255(5):2000-2005.
京公网安备 11010802027423号