孟祥晨 - 哈尔滨工业大学 - 材料科学与工程学院

当前位置： X-MOL首页 › 全球导师 › 国内导师 › 孟祥晨

孟祥晨副研究员硕士生导师收藏完善纠错
哈尔滨工业大学材料科学与工程学院
登录后才能查看导师的联系方式，马上登录...

个人简介

孟祥晨，副研究员，硕士研究生导师，籍贯辽宁省喀左县。工作于哈尔滨工业大学材料学院先进焊接与连接国家重点实验室。面向轻质高强铝合金、镁合金、钛合金、高强钢和复合材料等航空航天、轨道交通、新能源汽车用同种和异种焊接关键需求，近年来，申请人主持国家部委、国家自然科学基金、航天创新基金、中国博士后特别资助（站中）等项目，在《Prog Mater Sci》(IF: 48.165)、《Energy Storage Mater》(IF: 20.831)、《Adv Sci》(IF: 17.521)、《ACS Appl Mater Inter》(IF: 10.383)、《Compos Part B》(IF:11.322)、《Compos Sci Technol》(IF: 9.879)、《Compos Part A》(IF: 9.463)等期刊发表SCI检索论文60余篇，6篇入选ESI高被引论文，SCI引用3000余次，单篇最高引用197次，H因子30，入选《ACS Appl Mater Inter》、《Adv Eng Mater》、《焊接学报》期刊封面3篇；出版学术著作2部《搅拌摩擦焊接基础及应用》和《Friction Stir Welding and Processing》，入选“十三五”国家重点出版物出版规划项目、“双一流”建设精品出版工程、黑龙江省精品图书出版工程和工信部“十四五”规划专著。获评2021年度哈尔滨工业大学优秀博士学位论文。任国际SCI期刊《Front Mater》和《Metals》专刊主编，获得国际期刊《J Manuf Process》与《Thin-Wall Struct》等杰出审稿贡献奖3次；申报国家发明专利15项，已授权9项。获得优秀学术报告4次，如全国搅拌摩擦焊与加工学术会议优秀报告奖等。主要学习与工作经历 2022年5月~至今：哈尔滨工业大学，焊接系，硕导 2021年12月~至今：哈尔滨工业大学，焊接系，副研究员 2020年07月~2021年12月：哈尔滨工业大学，焊接系，讲师 2020年06月~至今：哈尔滨工业大学，机械工程，博士后（导师：曹健教授） 2016年03月~2020年04月：哈尔滨工业大学，焊接系，博士（导师：黄永宪教授） 2009年09月~2016年03月：沈阳航空航天大学，航宇学院，本科、硕士（导师：刘占军、姬书得教授） 2006年09月~2009年07月：辽宁喀左县一中，高中 2003年09月~2006年07月：南公营子/县蒙初，初中荣誉奖励国家部委科技进步二等奖，2022年黑龙江省高等教育教学成果奖二等奖，2022年哈工大教学成果奖一等奖，2022年哈工大“集群优秀学风班”212L0315班（班主任），2022年哈尔滨工业大学优秀博士学位论文，2021年全国大学生焊接创新大赛二等奖（指导教师），2021年博士研究生国家奖学金，2018年第四届南钢杯 RAL材料加工工程研究生学术论坛学术报告一等奖，2019年全国第二届搅拌摩擦焊接与加工学术会议优秀报告，2018年工信创业奖学金特等奖，2016年硕士研究生国家奖学金，2015年

研究领域

搅拌摩擦焊接基础理论特异性材料固相焊接（铝/镁、铝/钢、铝/聚合物等）基于搅拌摩擦的绿色再制造技术基于大塑性变形的超细晶新材料制备焊接接头组织调控与性能评价

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Sleeve friction stud welding towards formation and property Wire-based friction stir additive manufacturing Lightweight Design: Friction-Based Welding between Metal and Polymer Green recycling of short-circuited garnet-type electrolyte for high-performance solid-state lithium batteries High cycling stability enabled by Li vacancy regulation in Ta-doped garnet-type solid-state electrolyte Cu-CNTs current collector fabricated by deformation-driven metallurgy for anode-free Li metal batteries Back stress dynamic balancing strategy enabled strength-ductility synergy in heterostructured Al-SiC composites Effect of Temperature and Material Flow Gradients on Mechanical Performances of Friction Stir Welded AA6082-T6 Joints Wire-Based Friction Stir Additive Manufacturing toward Field Repairing Elimination of root kissing bond in friction stir welding of thick plates Grain Boundary Engineering in Ta-Doped Garnet-Type Electrolyte for Lithium Dendrite Suppression Interface Formation of Medium-Thick AA6061 Al/AZ31B Mg Dissimilar Submerged Friction Stir Welding Joints Towards Friction Stir Remanufacturing of High-Strength Aluminum Components Achieving High-Quality Tungsten-Copper Composites Via Deformation-Driven Metallurgy Deformation-Driven Processing of CNTs/PEEK Composites towards Wear and Tribology Applications Improving tensile-shear strength of friction stir lap welded joints of light-weight Mg-Li/Mg–Al-Zn alloys Heteroatom Modification Enhances Corrosion Durability in High‐Mechanical‐Performance Graphene‐Reinforced Aluminum Matrix Composites Entire-Process Simulation of Friction Stir Welding - Part 2: Implementation of Neural Networks Interface engineering for garnet-type electrolyte enables low interfacial resistance in solid-state lithium batteries Entire Process Simulation of Friction Stir Welding - Part 1: Experiments and Simulation Reversible passivation in primary aluminum-air batteries via composite anodes Recycling garnet-type electrolyte toward superior cycling performance for solid-state lithium batteries Expanding-Welding: A hybrid deformation and welding process for joining dissimilar metals Deformation-driven modification of Al-Li-Mg-Zn-Cu high-alloy aluminum as anodes for primary aluminum-air batteries Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy Interface stability and fracture mechanism of Al/Steel friction stir lap joints by novel designed tool Deformation-driven modification towards strength-ductility enhancement in Al–Li–Mg–Zn–Cu lightweight high-entropy alloys Stepped-shoulder friction stir welding to alleviate weld thinning for dissimilar AA2195-T8/AA2219-T6 alloys Fast Li-ion transport pathways via 3D continuous networks in homogeneous garnet-type electrolyte for solid-state lithium batteries High Pressure‐Amplitude Ratio Ultrasonic Spot Welding of Thermoplastic Carbon Fiber‐Reinforced Epoxy Strength-ductility balance strategy in SiC reinforced aluminum matrix composites via deformation-driven metallurgy Welding of high entropy alloys: Progresses, challenges and perspectives Insight on corrosion behavior of friction stir welded AA2219/AA2195 joints in astronautical engineering Oriented Attachment Strategy Toward Enhancing Ionic Conductivity in Garnet-Type Electrolytes for Solid-State Lithium Batteries Equal-load-bearing joining of alclad AA2024-T4 alloy stringers and skins in aviation via friction stir lap welding Ultrafine-grained Mg-Zn-Y-Zr alloy with remarkable improvement in superplasticity Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy Friction stir extrusion for fabricating Mg-RE alloys with high strength and ductility Recent progress on control strategies for inherent issues in friction stir welding Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement Friction rivet joining towards high-performance wood-metal hybrid structures Deformation-driven metallurgy of SiC nanoparticle reinforced aluminum matrix nanocomposites Grain Refinement in Surficial Cryogenic Grinding Friction stir spot welding of aluminum and wood with polymer intermediate layers Friction stir lap welding of AA2024-T4 with drastically different thickness New technique of radial-additive friction stir repairing for exceeded tolerance holes Enhanced strength and ductility of friction-stir-processed Mg–6Zn alloys via Y and Zr co-alloying Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility Friction self-riveting welding between polymer matrix composites and metals Non-weld-thinning friction stir welding Joint formation mechanism of high depth-to-width ratio friction stir welding A Review on High Entropy Alloys Coatings: Fabrication Processes and Property Assessment Improving mechanical properties of composite/metal friction stir lap welding joints via a taper-screwed pin with triple facets Friction stir lap welding of Al to Mg assisted by ultrasound and a Zn interlayer Achieving High-Quality Al/Steel Joint with Ultrastrong Interface New technique of friction-based filling stacking joining for metal and polymer Functionally Gradient Coating of Aluminum Alloy via In Situ Arc Surface Nitriding with Subsequent Friction Stir Processing Atypical grain coarsening of friction stir welded AA6082-T6: Characterization and modeling Probe shape design for eliminating the defects of friction stir lap welded dissimilar materials Microstructures and mechanical properties of micro friction stir welding (μFSW) of 6061-T4 aluminum alloy A general strategy for the reliable joining of Al/Ti dissimilar alloys via ultrasonic assisted friction stir welding Joining of magnesium and aluminum alloys via ultrasonic assisted friction stir welding at low temperature AZ31B/7075-T6 alloys friction stir lap welding with a zinc interlayer Material flow and mechanical properties of aluminum-to-steel self-riveting friction stir lap joints 搅拌摩擦焊缝缺陷固相修复技术研究进展 Research Progress of Solid Phase Repair Technology forFriction Stir Weld Defects Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing Microstructure and Mechanical Properties of Friction Stir Repaired Al–Cu Casting Alloy Joining of carbon fiber reinforced thermoplastic and metal via friction stir welding with co-controlling shape and performance Drilling-filling friction stir repairing of AZ31B magnesium alloy Joining of aluminum alloy and polymer via friction stir lap welding Improving Joint Formation and Tensile Properties of Dissimilar Friction Stir Welding of Aluminum and Magnesium Alloys by Solving the Pin Adhesion Problem Friction spot welding of carbon fiber-reinforced polyetherimide laminate Improving friction stir weldability of Al/Mg alloys via ultrasonically diminishing pin adhesion Interface characteristic and tensile property of friction stir lap welding of dissimilar aircraft 2060-T8 and 2099-T83 Al–Li alloys Improving tensile properties of Al/Mg joint by smashing intermetallic compounds via ultrasonic-assisted stationary shoulder friction stir welding A practical strategy for improving the weldability of ultra-thin Al/Mg sheets by ultrasonic-assisted friction stir welding Friction stir welding/processing of polymers and polymer matrix composites Improving joint formation and tensile properties of friction stir welded ultra-thin Al/Mg alloy sheets using a pinless tool assisted by a stationary shoulder Numerical design of high depth-to-width ratio friction stir welding Micro friction stir welding of ultra-thin Al-6061 sheets Dynamic recrystallization and mechanical properties of friction stir processed Mg-Zn-Y-Zr alloys Dissimilar friction stir welding of 6061 aluminum alloy and AZ31 magnesium alloy assisted with ultrasonic Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder Effect of groove distribution in shoulder on formation, macrostructures, and mechanical properties of pinless friction stir welding of 6061-O aluminum alloy Self-riveting friction stir lap welding of aluminum alloy to steel Microstructural evolution and mechanical properties of Mg-Zn-Y-Zr alloy during friction stir processing Effect of welding parameters on joint formation of friction stir welded 2060 Al-Li alloy Improving Joint Features and Mechanical Properties of Pinless Fiction Stir Welding of Alcald 2A12-T4 Aluminum Alloy

学术兼职

《Frontiers in Materials》国际SCI期刊《Joining and Welding of New and Dissimilar Materials 》专刊主编《Metals》国际SCI期刊《Studies on Aeronautical Metals by Friction Stir Welding》《Coatings》国际SCI期刊《Friction and Friction-Based Techniques》国际期刊《J Manuf Process》、《Thin-Wall Struct》、《J Mater Eng Perform》、《Materialia》杰出审稿专家期刊审稿人《Composites Part B》、《Materials & Design》、《Journal of Materials Processing Technology》、《Materials Science and Engineering A》、《Journal of Materials Science and Technology》、《Journal of Magnesium and Alloys》、《Journal of Material Research & Technology》、《Results in Physics》、《Alexandria Engineering Journal》、《Journal of Manufacturing Processes》、《Thin-wall Structure》、《Materials Letters》、《Materials Characterization》、《Heliyon》、《Advanced Engineering Materials》、《Journal of Materials Engineering and Performance》、《Defence Technology》、《Materials Today Communications》、《Acta Metallurgica Sinica (English letters)》、《Archieves of Metallurgy and Materials》、《International Journal of Mechanical Sciences》、《Welding in the Word》、《Vacuum》、《Experimental Techniques (EXTE)》、《Measurement and Control》、《Intermetallics》、《Materials Chemistry and Physics》、《Microelectronics Journal》、《Advances in Industrial and Manufacturing Engineering》、《Sientific reports》、《Materialia》、《Arabian Journal for Science and Engineering》、《机械工程材料》、《Materials Science and Technology》、《International Journal of Lightweight Materials and Manufacture》、《Journal of Mechanical Engineering》、《Machines》、《Metals》、《Materials》、《Journal of Manufacturing and Materials Processing》、《Metals》、《航空制造技术》、《Crystals》、《Materials Today Sustainability》

我收藏的导师 >

便捷的期刊搜索 >

免费课题组网站 >

推荐链接