近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Jiang, Yumo, Meng Jiang*, Xi Chen, Ao Chen, Shengchong Ma, Nan Jiang, Shengkui Zhang, Zhiyuan Wang, Zhenglong Lei, and Yanbin Chen. "Vacuum laser beam welding of AZ31 magnesium alloy: Weld formability, microstructure and mechanical properties." Optics & Laser Technology 169 (2024): 110115.
Feng, Jiecai, Shulei Liu, Lijian Zhu, Ling Xia, Meng Jiang, Hongfei Liu, Yingzhong Tian, and Xingli Zou. "Laser welding for 30Cr3 ultra-high-strength steel." The International Journal of Advanced Manufacturing Technology (2023): 1-15.
Wang, Zhiyuan, Meng Jiang*, Xi Chen, Yang Du, Zhenglong Lei, Sicong Zhao, and Yanbin Chen. "Mitigating spatters in keyhole-mode laser welding by superimposing additional ring-shaped beam." Optics & Laser Technology 168 (2023): 109869.
Han, Tianyi, Jiaying Chen, Zongfan Wei, Nan Qu, Yong Liu, Danni Yang, Sicong Zhao, Zhonghong Lai, Meng Jiang*, and Jingchuan Zhu. "Effect of cooling rate on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion." Journal of Materials Research and Technology 25 (2023): 4063-4073.
Li, Bingwei, Zhenglong Lei, Xinrui Zhang, Yanbin Chen, Xi Chen, and Meng Jiang. "Effect of mixed powder proportion on microstructure and defects of high-nitrogen steel welded joints." Optics & Laser Technology 163 (2023): 109430.
Ma, Shengchong, Xi Chen, Meng Jiang*, Bingchen Li, Zhiyuan Wang, Zhenglong Lei, and Yanbin Chen. "Surface morphology, microstructure and mechanical properties of Al–Mg–Sc alloy thin wall produced by laser-arc hybrid additive manufacturing." Thin-Walled Structures 186 (2023): 110674.
Li, Bingchen, Xi Chen, Meng Jiang*, Shengchong Ma, Zhiyuan Wang, Zhenglong Lei, and Yanbin Chen. "Microstructure and mechanical properties of TiC nanoparticles reinforced 7075 aluminium alloy fabricated by oscillating laser-arc hybrid additive manufacturing." Science and Technology of Welding and Joining (2023): 1-11.
Chen, Xi, Shengkui Zhang, Meng Jiang*, Yuan Chen, Yumo Jiang, Zhiyuan Wang, Nan Jiang et al. "Microstructure and mechanical properties of laser welded hot-press-formed steel with varying thicknesses of Al–Si coatings cleaned by nanosecond pulsed laser." Journal of Materials Research and Technology 22 (2023): 2576-2588.
Liang, Jingwei, Shibo Wu, Bingwei Li, Zhenglong Lei, Yanbin Chen, Meng Jiang, Xinrui Zhang, and Xi Chen. "Microstructure and corrosion behavior of Y-modified ZK60 Mg alloy prepared by laser powder bed fusion." Corrosion Science 211 (2023): 110895.
Shengchong Ma, Meng Jiang*, Xi Chen, Bingchen Li, Nan Jiang, Yuan Chen, Shibo Wu et al. "Macro/micro-structure and mechanical properties of Al-6Mg-0.3 Sc alloy fabricated by oscillating laser-arc hybrid additive manufacturing." Journal of Alloys and Compounds 929 (2022): 167325.
Jingwei Liang, Shibo Wu, Zhenglong Lei, Yanbin Chen, Xinrui Zhang, Bingwei Li, Meng Jiang, and Yuan Chen. "In-situ aging treatment by preheating to obtain high-strength ZK60 Mg alloy processed by laser powder bed fusion." Materials Characterization 194 (2022): 112361.
Xi Chen, Nan Jiang, Meng Jiang*, Yang Du, Shengchong Ma, Yuan Chen, Caiwang Tan, Zhenglong Lei, Sicong Zhao, and Yanbin Chen. "Numerical investigation of asymmetric weld fusion geometry in laser welding of aluminium alloy with beam oscillation." Science and Technology of Welding and Joining 27, no. 8 (2022): 595-605.
Yuan Chen, Xi Chen, Meng Jiang*, Zhenglong Lei, Zhe Wang, Jingwei Liang, Shibo Wu, Shengchong Ma, Nan Jiang, and Yanbin Chen. "Coaxial laser metal wire deposition of Ti6Al4V alloy: process, microstructure and mechanical properties." Journal of Materials Research and Technology 20 (2022): 2578-2590.
Meng Jiang*, Bingchen Li, Xi Chen, Caiwang Tan, Zhenglong Lei, Sicong Zhao, and Yanbin Chen. "Numerical study of thermal fluid dynamics and solidification characteristics during continuous wave and pulsed wave laser welding." International Journal of Thermal Sciences 181 (2022): 107778.
Meng Jiang*, Tuhin Mukherjee, Yang Du, and Tarasankar DebRoy. Superior printed parts using history and augmented machine learning. npj Computational Materials 8, no. 1 (2022): 1-10.
iming Sun, Rongrong Huang, Hongyun Zhao, Xi Chen, Meng Jiang, Laijun Wu, Bo Chen, and Caiwang Tan. "Enhancement of resistance element welding of aa6061 to dp600 steel by using external magnetic field." Journal of Manufacturing Processes 80 (2022): 347-358.
Shibo Wu, Zhenglong Lei, Meng Jiang, Jingwei Liang, Bingwei Li, and Yanbin Chen. "Experimental investigation and discrete element modeling for particle-scale powder spreading dynamics in powder-bed-fusion-based additive manufacturing." Powder Technology 403 (2022): 117390.
Tianyi Han, Yong Liu, Danni Yang, Nan Qu, Mingqing Liao, Zhonghong Lai, Meng Jiang*, and Jingchuan Zhu. "Effect of annealing on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion additive manufacturing." Materials Science and Engineering: A 839 (2022): 142868.
Jingwei Liang, Zhenglong Lei, Yanbin Chen, Shibo Wu, Xi Chen, Meng Jiang, and Shiyu Cao. "Formability, microstructure, and thermal crack characteristics of selective laser melting of ZK60 magnesium alloy." Materials Science and Engineering: A 839 (2022): 142858.
Bing Han, Yanbin Chen, Caiwang Tan, Meng Jiang, Jiang Bi, Jiecai Feng, Xi Chen et al. "Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes." Surface and Coatings Technology 434 (2022): 128241.
Hengquan Zhang, Meng Jiang*, Xi Chen, Lianfeng Wei, Shizhong Wang, Yumo Jiang, Nan Jiang, Zhiyuan Wang, Zhenglong Lei, and Yanbin Chen. "Investigation of Weld Root Defects in High-Power Full-Penetration Laser Welding of High-Strength Steel." Materials 15, no. 3 (2022): 1095.
Meng Jiang*, Nan Jiang, Xi Chen, Shengchong Ma, Yuan Chen, Yanbin Chen, and Zhenglong Lei. "Experimental and numerical investigation of single-pass laser welding of 20 mm-thick high-strength steel under reduced ambient pressure." Journal of Materials Research and Technology 15 (2021): 2317-2331.
Xi Chen, Zhenglong Lei, Yanbin Chen, Meng Jiang*, Nan Jiang, Jiang Bi, and Sanbao Lin. "Enhanced wetting behavior using femtosecond laser-textured surface in laser welding-brazing of Ti/Al butt joint." Optics & Laser Technology 142 (2021): 107212.
Xi Chen, Meng Jiang*, Yanbin Chen, Zhenglong Lei, Sicong Zhao, and Sanbao Lin. "Laser welding-brazing under temporal and spatial power modulation for dissimilar materials AA6061 to Ti6Al4V joints." Manufacturing Letters 29 (2021): 70-73.
Xi Chen, Zhenglong Lei, Yanbin Chen, Yu Han, Meng Jiang, Ze Tian, Jiang Bi, and Sanbao Lin. "Microstructure and tensile properties of Ti/Al dissimilar joint by laser welding-brazing at subatmospheric pressure." Journal of Manufacturing Processes 56 (2020): 19-27.
M. Jiang , Y. B. Chen, X. Chen, W. Tao, and T. Debroy. "Enhanced penetration depth during reduced pressure keyhole-mode laser welding." Weld. J 90 (2020): 110-123.
Meng Jiang*, Xi Chen, Yanbin Chen, and Wang Tao. "Mitigation of porosity defects in fiber laser welding under low vacuum." Journal of Materials Processing Technology 276 (2020): 116385.
Meng Jiang*, Xi Chen, Yanbin Chen, and Wang Tao. "Increasing keyhole stability of fiber laser welding under reduced ambient pressure." Journal of Materials Processing Technology 268 (2019): 213-222.
Xi Chen, Zhenglong Lei, Yanbin Chen, Bing Han, Meng Jiang, Ze Tian, Jiang Bi, and Sanbao Lin. "Nano-indentation and in-situ investigations of double-sided laser beam welded 2060-T8/2099-T83 Al-Li alloys T-joints." Materials Science and Engineering: A 756 (2019): 291-301.
Xi Chen, Zhenglong Lei, Yanbin Chen, Yu Han, Meng Jiang, Ze Tian, Jiang Bi, Sanbao Lin, and Nan Jiang. "Effect of laser beam oscillation on laser welding–brazing of Ti/Al dissimilar metals." Materials 12, no. 24 (2019): 4165.
Chen, X., Lei, Z., Chen, Y., Jiang, M., Tian, Z., Bi, J. and Lin, S., 2019. Microstructure and mechanical properties of laser welded Al-Si coated hot-press-forming steel joints. Materials, 12(20), p.3294.
Meng Jiang, Wang Tao, Yanbin Chen, and Fukang Li. "Comparison of processing window in full penetration laser welding of thick high-strength steel under atmosphere and sub-atmosphere." Optics & Laser Technology 109 (2019): 449-455.
Meng Jiang, Wang Tao, and Yanbin Chen. "Laser welding under vacuum: a review." Applied Sciences 7, no. 9 (2017): 909.
Meng Jiang, Wang Tao, Shuliang Wang, Liqun Li, and Yanbin Chen. "Effect of ambient pressure on interaction between laser radiation and plasma plume in fiber laser welding." Vacuum 138 (2017): 70-79.
学术兼职
中国机械工程学会焊接分会青年工作者委员会委员
中国光学学会激光加工专业委员会委员
教学部学位中心全国博士硕士学位论文评审专家
Journal of Materials Processing Technology, Additive Manufacturing, Journal of Materials Science and Technology, Materials Research Letters, Composites Part B: Engineering, Journal of Alloys and Compounds, Applied Surface Science, Journal of Manufacturing Processes, Ceramics International, Science and Technology of Welding and Joining, Journal of Materials Reseach & Technology, Optics & Laser Technology, International Journal of Thermal Sciences, The International Journal of Advanced Manufacturing Technology, Vacuum, Journal of Laser Application, Materials Today Communications, Case Studies in Construction Materials, Heliyon, Welding International, Materials, Metal等20余个SCI期刊审稿人
京公网安备 11010802027423号