王厚勤 - 哈尔滨工业大学 - 材料科学与工程学院

个人简介

王厚勤，男，1986年生，副研究员，硕士研究生导师。先后主持承担国家部委课题、国家重点研发计划子课题、国家自然科学基金青年基金项目、中国运载火箭技术研究院-高校联合基金项目、山东省重点实验室开放课题等多项国家级、省部级课题。教育经历 2004.09-2008.07，哈尔滨工业大学，焊接技术与工程专业，学士（本硕连读） 2008.09-2010.07，哈尔滨工业大学，材料加工工程，硕士 2012.03-2018.01，哈尔滨工业大学，材料加工工程，博士工作经历 2010.08-2012.02 北京控制工程研究所，助理工程师 2018.07-2021.12 哈尔滨工业大学材料学院，助理研究员 2018.07迄今哈尔滨工业大学航天学院，博士后 2022.01迄今哈尔滨工业大学材料学院，副研究员荣誉奖项 2021年10月，第五届全国大学生焊接创新大赛一等奖项目《抛物面%2B平面双反射太阳能集光焊接系统》指导老师 2021年 7月，《铜/钢异种金属电子束焊接焊缝背面内凹缺陷的数值模拟研究》获2021有色金属新材料大会优秀报告 2020年 5月，哈尔滨工业大学五四表彰抗疫志愿服务奖 2019年12月，哈尔滨工业大学先进焊接与连接国家重点实验室突出贡献奖 2019年10月，《60mm厚TC4钛合金电子束焊接头疲劳性能》获2019中国机械工程学会优秀论文（发表于《焊接学报》2017年第5期） 2012年11月，硕士毕业论文《CC与TiAl合金的钎焊及自蔓延反应连接》获第八届黑龙江省优秀硕士学位论文（2010年7月毕业） 2010年 7月，哈尔滨工业大学优秀共产党员、哈尔滨工业大学优秀硕士毕业生（金奖） 2010年 4月，黑龙江省三好学生、黑龙江省优秀毕业生 2009年12月，哈尔滨工业大学三好学生标兵 2008年6月，哈尔滨工业大学优秀毕业生

研究领域

新材料及异种材料电子束焊接连接机理与技术开发熔池流动行为数值模拟

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Han K, Wang H, Zhang B, Li X, Zhao J, Shi K, Liu H. Effect of partial and full post-weld heat treatments on microstructure and mechanical properties of IN738LC joint by electron beam welding. Welding in the World. 2022:1-11. Tan, Caiwang, Yuhang Liu, Bingxiao Xu, Houqin Wang, Fuyun Liu, Xiangtao Gong, Zhi Zeng, Bo Chen, and Xiaoguo Song. Numerical and experimental study of thermal fluid flow and keyhole dynamic in laser welding of aluminum alloy assisted by electromagnetic field. Optics & Laser Technology. 2023,157: 108718. 张秉刚, 王一帆, 王厚勤. 先进材料与异种材料电子束焊接研究进展[J]. 焊接学报, 2022(8):43. Wang, Xiaobing, Houqin Wang, Yu Qiu, Sen Yu, Yanhua Zhao, Meirong Xie, and Binggang Zhang. Formability behavior, microstructural evolution, and mechanical properties of GH4169 and electroformed Ni electron beam welded joint. Vacuum,2022,204: 111379. Yu, Tao, Houqin Wang, Ke Han, Yifan Wang, Yu Qiu, and Binggang Zhang. Mo20Nb20Co20Cr20 (Ti8Al8Si4) refractory high-entropy alloy coatings fabricated by electron beam cladding: Microstructure and wear resistance." Intermetallics 2022,149: 107669. Liu F, Wang H, Meng X, Tan C, Chen B, Song X. Effect of magnetic field orientation on suppressing porosity in steady-magnetic-field-assisted aluminum alloy deep-penetration laser welding Journal of Materials Processing Technology, 2022: 117569. Yu T, Wang H, Han K, Zhang B. Microstructure and wear behavior of AlCrTiNbMo high-entropy alloy coating prepared by electron beam cladding on Ti600 substrate Vacuum, 2022, 199: 110928. Han K, Wang H, Zhang B, Zhao J, Lei J, Zhao X. Microstructural/mechanical characterizations of electron beam welded IN738LC joint after post-weld heat treatment. Journal of Materials Research and Technology. 2022,17:1030-1042. Wang H, Han K, Peng F, Zhang B. Strain-age cracking in vacuum electron beam welded IN738LC alloy during post-weld heat treatment Vacuum, 2021, 194: 110588. 李晓鹏,张泽宇,王厚勤,张秉刚,于涛,冯吉才.Ti600和Ni-25%Si合金钎焊接头性能及失效机理分析焊接学报,2021,42(04):84-91%2B101. Wang H, Han K, Zhang B. Effect of post-weld solution treatment on microstructure and mechanical properties of electron beam welded IN738LC joint Journal of Materials Research and Technology, 2021, 15: 3047-3059. Han K, Wang H, Peng F, Zhang B. Effect of cooling rate on the microporosity in the fusion zone of electron beam welded IN738LC joint Materials Letters, 2020, 258: 126682. Han K, Wang H, Peng F, Zhang B Guo L. Effect of thermal compensation treatment on the microstructure and mechanical properties of IN738LC joint by electron beam welding Journal of Manufacturing Processes, 2020, 58: 536-550. Peng F, Zhang B, Wang H, Han K. Effect of pre-weld heat treatment on the microstructure and mechanical properties of electron beam welded IN738LC joint Vacuum, 2019, 168: 108857. 张秉刚,彭飞,王厚勤,韩柯.沉淀强化镍基高温合金熔化焊液化裂纹研究进展焊接,2019(09):26-31%2B66. Li X, Zhang B, Wang H, Yu T. Control of the floating zone stability during electron beam melting process of Ni-25% Si alloy Journal of Manufacturing Processes, 2019, 45: 702-709. Han K, Wang H, Peng F, Zhang B, Shen L. Investigation of microstructure and mechanical performance in IN738LC joint by vacuum electron beam welding Vacuum, 2019, 162: 214-227. 曹健,贺宗晶,亓钧雷,王厚勤,冯吉才.采用(Ti/Ni/Cu)_f多层箔钎焊C/C复合材料与TiAl合金机械工程学报,2018,54(09):108-114. Han K, Wang H, Shen L, Zhang B. Analysis of cracks in the electron beam welded joint of K465 nickel-base superalloy Vacuum, 2018, 157: 21-30.(引用33次) Li Y, Wang H, Han K, Li X, Zhang B. Microstructure of Ti-45Al-8.5 Nb-0.2 W-0.03 Y electron beam welding joints Journal of Materials Processing Technology, 2017, 250: 401-409. 王厚勤,韩柯,张秉刚,李宇轩.高铌TiAl/Ti600合金电子束焊接头组织与性能焊接学报,2017,38(06):96-100%2B133. Han K, Wang H, Zhang B, Li Y, Wang T. Effect of thermal compensation on microstructure and mechanical properties of electron-beam welded joint for high-Nb containing TiAl/Ti600 alloys Materials & Design, 2017, 131: 273-285. Li X, Wang H, Wang T, Zhang B, Yu T, Li R. Microstructural evolution mechanisms of Ti600 and Ni-25% Si joint brazed with Ti-Zr-Ni-Cu amorphous filler foil Journal of Materials Processing Technology, 2017, 240: 414-419. 王厚勤,张秉刚,王廷,冯吉才.电子束定点焊接304不锈钢熔池流动行为数值模拟焊接学报,2016,37(03):57-61%2B131. 王厚勤, 张秉刚, 王廷, 冯吉才. Effect of Al2O3 film on weld appearance of stationary electron beam welded aluminum. 中国焊接: 英文版, 2016(1), 42-48. 冯吉才,王厚勤,张秉刚,王廷.空间焊接技术研究现状及展望焊接学报,2015,36(06):107-112%2B118. 王厚勤,张秉刚,王廷,闻雅,冯吉才.60mm厚TC4钛合金电子束焊接头疲劳性能焊接学报,2015,36(05):13-16%2B103%2B113. 张志伟,王厚勤,王文平.连接参数对Ti53311S高温钛合金TLP连接接头性能的影响宇航材料工艺,2015,45(01):62-65. Cao J, Wang HQ, Qi JL, Lin XC, Feng JC. Combustion synthesis of TiAl intermetallics and their simultaneous joining to carbon/carbon composites Scripta Materialia, 2011, 65(3): 261-264.(引用33次) Wang H, Cao J, Feng J. Brazing mechanism and infiltration strengthening of CC composites to TiAl alloys joint Scripta Materialia, 2010, 63(8): 859-862. (引用98次) 王厚勤,曹健,张丽霞,冯吉才,黄海.铜合金与钢连接技术研究进展焊接技术,2009,38(03):1-6.