崔晓磊 - 哈尔滨工业大学 - 材料科学与工程学院

个人简介

崔晓磊，男，1986年9月出生，内蒙古兴和县人，工学博士，副教授，硕士生导师，哈尔滨工业大学材料科学与工程学院，流体高压成形技术研究所团队成员。主要从事薄壁构件流体压力成形理论与技术、特种材料塑性加工技术的研究工作。 2013年获得欧盟第7框架玛丽-居里国际研究人员交换项目支持，赴意大利巴勒莫大学(University of Palermo)进行短期访问。2018年入选山西省“三晋英才”支持计划青年优秀人才。曾在中国工程物理研究院和太原理工大学从事科研教学工作，具有扎实的理论基础与丰富的工程经验。主持国家/省自然科学基金、中国工程物理研究院项目/课题、国防科技重点实验室稳定支持项目、国家/省博士后基金等10余项，参与重点研发计划项目、基础加强计划项目、国自然重点基金项目等4项。研究成果作为重要组成部分获得省部级科技奖励3项（中国汽车工业技术发明一等奖、航天科技科技进步二等奖、省部级科技进步三等奖）。至今在IJMS、JMPT、CIRP-JMST和JMRT等国内外著名期刊上发表论文30余篇，申请/授权发明专利10余项（1项美国专利授权）。担任CIRP-JMST、ACAM、IJFO、JAMT、MSE-A等十余本国际期刊审稿人。教育经历 2011.08-2015.10 哈尔滨工业大学材料科学与工程学院材料加工工程-塑性成形工学博士 2013.11-2013.12 University of Palermo (意大利) Department of Mechanical Engineering 短期访问 2009.08-2011.07 哈尔滨工业大学材料科学与工程学院材料加工工程-塑性成形工学硕士 2005.09-2009.06 湖南大学材料科学与工程学院材料成型及控制工程工学学士工作经历 2022.12-目前哈尔滨工业大学材料科学与工程学院副教授，硕士生导师 2019.09-2022.12 哈尔滨工业大学材料科学与工程学院讲师，硕士生导师 2017.09-2019.09 太原理工大学材料科学与工程学院讲师，硕士生导师 2015.11-2017.04 中国工程物理研究院材料研究所助理研究员

研究领域

流体高压成形三维应力及超低温变形理论基于体积加载法的流体高压成形技术薄壁管材失稳起皱机制及皱纹控制

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Xiao-Lei Cui*, W.W. Zhang, Zhi-Chao Zhang, Yi-Zhe Chen, Peng Lin, Cheng-Zhong Chi. Prediction of forming limit of dual-phase 500 steel sheets using the GTN ductile damage model in an innovative hydraulic bulging test [J]. JOM: The Journal of the Minerals, Metals & Materials Society, 2018, 70(8): 1542-1547. (SCI, IF=2.145) 张晶，池成忠，崔晓磊, 林鹏. 热压制备5052/AZ31B/5052三层复合板材的微观组织与力学性能. 锻压技术. 2018, 已接受. Xiao-Lei Cui*, Zhai-Ping Yang, Xiao-Song Wang. Characterization of multiaxial stress-strain response of tube metal from double-sided hydro-bulging test based on Hosford's 1979 yield criterion [J]. JOM: The Journal of the Minerals, Metals & Materials Society, 2017, 69(5): 930-936. (SCI, IF=2.145) Xiao-Lei Cui*, Xiao-Song Wang, S.J. Yuan. Formability improvement of 5A02 aluminum alloy tube by the outer cladding tube [J]. International Journal of Advanced Manufacturing Technology, 2017, 90(5-8): 1617-1624. (SCI, IF=2.601) Xiao-Lei Cui*, Xiao-Song Wang, S.J. Yuan. Further assessment of the plastic instability of thin-walled tubes in double-sided hydro-bulging process with verification experiments [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, DOI: 10.1177/0954405417738285. (SCI, IF=1.445) 崔晓磊，苑世剑. 铝合金与不锈钢管材内高压成形中起皱分析与利用[C] 第十五届全国塑性工程学会年会暨第七届全球华人塑性加工技术交流会, 济南，2017.10. X.L. Cui, S.J. Yuan. Determination of mechanical properties of anisotropic thin-walled tubes under three-dimensional stress state [J]. International Journal of Advanced Manufacturing Technology, 2016, 87(5): 1917-1927. (SCI, IF=2.601) X.S. Wang, X.L. Cui, S.J. Yuan. Research on flattening behavior of wrinkled 5A02 aluminum alloy tubes under internal pressure [J]. International Journal of Advanced Manufacturing Technology, 2016, 87(1): 1159-1167. (SCI, IF=2.601) Xiao-Lei Cui*, Xiao-Song Wang, S.J. Yuan. Effects of mechanical property parameters on wrinkling behavior of thin-walled tubes in hydroforming process [J]. International Journal of Advanced Manufacturing Technology, 2016, https://doi.org/10.1007/s00170-018-2706-2. (SCI, IF=2.601) Shi-Jian Yuan, Xiao-Lei Cui, Xiao-Song Wang. Investigation into wrinkling behavior of thin-walled 5A02 aluminum alloy tubes under internal and external pressure [J] International Journal of Mechanical Sciences, 2015, 92C: 245-258. (SCI, IF=3.570) Xiao-Lei Cui*, Xiao-Song Wang, Shi-Jian Yuan. The bulging behavior of thick-walled 6063 aluminum alloy tubes under double-sided pressures [J]. JOM: The Journal of the Minerals, Metals & Materials Society, 2015, 67(5): 909-915. (SCI, IF=2.145) W.W. Zhang, X.S. Wang, X.L. Cui, S.J. Yuan. Analysis of corner filling behavior during tube hydro-forming of rectangular section based on GTN ductile damage model [J] Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229(9): 1566-1574. (SCI, IF=1.445) X. L. Cui, X. S. Wang, S. J. Yuan. Wrinkling behavior in tube hydroforming coupled with internal and external pressure[C] In: Proceedings of the 4th International Conference on New Forming Technology, Glasgow, UK, 2015, MATEC Web of Conferences 21: 06002.p1-p6. (EI) 崔晓磊, 王小松, 苑世剑. 内外压复合作用下5A02铝合金管材的硬化行为. 中国有色金属学报. 2015, 25(7): 1790-1797. (EI) Xiao-Lei Cui, Xiao-Song Wang, Shi-Jian Yuan. Experimental verification to the influence of normal stress on the formability of thin-walled 5A02 aluminum alloy tubes [J] International Journal of Mechanical Sciences. 2014, 88(11): 232-243. (SCI, IF=3.570) Xiao-Lei Cui, Xiao-Song Wang, Shi-Jian Yuan. Deformation analysis of double-sided tube hydroforming in square-section die [J] Journal of Materials Processing Technology. 2014, 214(7): 1341-1351. (SCI, IF=3.647) 崔晓磊*, 王小松, 林艳丽，苑世剑. 管材流体压力成形三维成形极限图. 塑性工程学报. 2014, 21(5): 1-5. Xiaosong Wang*, Yang Cai, Xiaolei Cui, Gang Liu, Shijian Yuan. Investigations on Formability Enhancement and Defect Control of Aluminum Alloy within Tube Hydroforming [C] International Conference “New Developments in Hydroforming”. Fellbach, Germany. 2014, 77-84. 崔晓磊*, 王小松, 苑世剑. 法向应力对板料成形极限影响的研究进展. 塑性工程学报. 2013, 20(2): 1-9. Xiao-song Wang*, Xiao-lei Cui, Shi-jian Yuan, Zheng Qu. Influence of external pressure on double-sided hydroforming of 5A02 aluminum alloy tube in a square die [C] Proceedings of the 6th International Conference on Tube Hydroforming, Jeju, Korea. 2013: 164-170. LIU Wei, Chen Yi-zhe, LIU Gang, CUI Xiao-lei. Welded Double Sheet Hydroforming of Complex Hollow Body [J] Trans. Nonferrous Met. Soc. China. 22(2012):309-314. (SCI, IF=1.795) 刘伟，刘钢，崔晓磊, 武永. 异种板材成对液压成形的材料变形行为研究[J]. 材料科学与工艺. 2012(6): 92-96. LIU Wei, LIU Gang, CUI Xiao-lei, YUAN Shi-jian. Formability influenced by process loading path of double sheet hydroforming [J] Trans. Nonferrous Met. Soc. China. 21(2011):465-469. (SCI, IF=1.795)