于海平 - 哈尔滨工业大学 - 材料科学与工程学院

个人简介

于海平(1974-)，男，副教授/博士生导师。长期从事板材高速率成形、异种金属塑性变形连接、板材成形新方法等方向研究，具有扎实的理论和实践基础。主持/参与承担国家自然科学基金5项、973项目课题1项、预先研究课题3项、预研基金4项、企业横向协作等多项科研项目。发表论文100余篇，其中SCI收录60余篇。获省技术发明一等奖1项，中国产学研合作创新奖1项。授权发明专利31项，申请发明专利4项。已参编专著和教材7册，正在主编教材1册。教育与工作经历 2002.09~2006.04 哈尔滨工业大学材料科学与工程学院工学博士学位 2004.06~2010.11 哈尔滨工业大学材料科学与工程学院助教、讲师 2012.12~2013.12 Ohio State University材料工程系访问学者 2010.12~ 哈尔滨工业大学材料科学与工程学院副教授

研究领域

高速率成形、塑性变形连接、板材成形新方法、板材智能成形技术等主要研究方向: 电磁成形与电液成形异种金属电磁脉冲焊接、连接与装配多种能场复合/辅助板材成形方法成套电磁/电液成形工艺与装备

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

An innovative coil for magnetic pulse welding of dissimilar metals: numerical simulation and experiments An Incremental Electromagnetic Forming of Stainless Steel Spiral-Grooved tube 异种金属板材磁脉冲连接技术研究进展 AA1060铝-DP600钢板材电磁脉冲连接工艺实验研究 Deformation Behavior and Connection Mechanism of EMP Connections in Aluminum Pipe Joints Deformation behavior of steel sheets under dynamic underwater impact: electric-pulse triggered energetic materials loads vs. wire explosion loads Mechanical properties and interface morphology of magnetic pulse welded Al-Fe tubes with preset geometric features Formability and micromechanisms of DP600 dual phase steels in electric-pulse triggered energetic materials forming Investigation on deformation of DP600 steel sheets in electric-pulse triggered energetic materials forming Improving the quality of Al-Fe tubes joint manufactured via magnetic pulse welding using an inclined-wall field shaper Effect of post weld heat treatment on mechanical performances and microstructures of magnetic pulse welded Al-Fe tubes Enhanced formability and hardness of AA2195-T6 during electromagnetic forming A novel method of processing sheet metals: Electric-pulse triggered energetic materials forming Superior mechanical properties and microstructure evolution of 2195-T6 Al-Li alloys at high strain rate Influence of scaleboard on the dispersion deformation behavior of DP600 steel sheets during electrohydraulic forming Plasticity enhancement mechanism of DP600 steel sheets during uniaxial quasi-static/dynamic forming 铝合金管等径孔电磁脉冲翻孔实验研究 Formability and deformation behavior of quasi-static prestrained DP600 steel sheets during electrohydraulic forming Effects of key parameters on MPW joint of 5A02 tube and SS304 tube Mechanical properties of the solution treated and quenched Al-Cu-Li alloy(AA2195) sheet during high strain rate deformation at room temperature Influence of wire parameters on the formability of DP600 steel sheets during wire-explosion impact forming Effects of temperature on quality of Al/Fe tubes joints manufactured by magnetic pulse welding 铝合金T型型材电磁校形试验研究 TA32钛合金板电磁成形性能与辅助弯曲试验研究 Hyperplasticity mechanism in DP600 sheets during electrohydraulic free forming Two-step method to improve deformation coordination of elongated hole flanging by electromagnetic forming Forming limit diagram of DP600 steel sheet during electrohydraulic forming Numerical Simulation of Electrohydraulic Forming of Aluminium Alloy Tube Molecular Dynamics Modeling of Atomic Diffusion Across Fe-Al Magnetic-pulse-welding Interface Microcrack healing in non-ferrous metal tubes through eddy current pulse treatment The deformation mechanism of circular hole flanging by magnetic pulse forming Electromagnetic forming of aluminum circular tubes into square tubes: Experiment and numerical simulation Interfacial microstructure of stainless steel/aluminum alloy tube lap joints fabricated via magnetic pulse welding Magnetic pulse welding of aluminum to steel sheet using uniform pressure electromagnetic actuator Experiments on electrohydraulic forming and electromagnetic forming of aluminum tube Experimental evaluation on mechanical properties of a riveted structure with electromagnetic riveting Experimental investigation on fabrication of Al/Fe bi-metal tubes by the magnetic pulse cladding process Interface and grain-boundary amorphization in the Al/Fe bimetallic system Electromagnetic forming facilitates the transition of deformation mechanism in 5052 aluminum alloy Plastic deformation behavior of bi-metal tubes during magnetic pulse cladding: FE analysis and experiments Microstructure and mechanical property of 2A10 aluminum alloy bar subjected to dynamic heading Magnetic pulse cladding of Aluminum alloy on mild steel tube Multi-filed coupling numerical simulation and Experimental investigation in Electromagnetic Riveting Mechanical property and microstructure of aluminum alloy-steel tubes joint by magnetic pulse welding Formability of AZ31 magnesium alloy sheets during magnetic pulse bulging Effects of process parameters on electromagnetic forming of AZ31 magnesium alloy sheets at room temperature 3A21铝合金-20钢管磁脉冲连接实验研究 Effects of current frequency on electromagnetic tube compression Sequential coupling simulation for electromagnetic-mechanical tube compression by finite element analysis Research on magnetic pulse sizing of aluminum tube 铝合金磁脉冲辅助板材冲压技术研究进展 Effect of field shaper on magnetic pressure in electromagnetic forming Effects of coil length on tube compression in electromagnetic forming A numerical investigation on magnetic pulse cladding of bi-metal tubes Microstructure investigation and mechanical property analysis in electromagnetic riveting 铜弹带磁脉冲焊接接头的力学性能紫铜-碳钢磁脉冲焊接接头界面形貌研究电磁成形技术在轻量化结构件成形与连接中的应用 Numerical and experimental investigation of electromagnetic riveting Effect of hydrogen on fracture behavior of Ti–6Al–4V alloy by in-situ tensile test Influence of hydrogen content on tensile and compressive properties of Ti–6Al–4V alloy at room temperature Numerical simulation of magnetic flux and force in electromagnetic forming with attractive force Research on formability of 5052 aluminum alloy sheet in a quasi-static–dynamic tensile process Al/Fe双金属磁脉冲成形复合界面的微观结构特征 Effects of mechanical properties and geometric conditions on stiffness of Hyperboloid Shallow Shell 铝合金管坯电液成形试验研究 An Impulse Tension Loading Technique for Material Behavior Studies in the Electromagnetic Forming Process 大直径铝合金铆钉以铆代螺可行性试验研究 QCr0.8铜合金动态力学性能研究 Numerical simulation and experiments analysis on stiffness control mechanism of hyperboloid shallow shells 板材特种成形技术（上、下）铝合金管缩口-冲孔复合磁脉冲成形试验研究电液成形技术研究现状及其发展趋势管件电液成形数值模拟

学术兼职

中国机械工程学会塑性工程分会第十二届理事、高速率成形论坛学术委员会主任，黑龙江省机械工程学会锻压专委会秘书长全国研究生教育评估监测专家、中国锻压协会头脑风暴专家库冲压组专家中国航天科技集团有限公司钣金工艺技术中心外聘专家、《精密成形工程》期刊“电磁成形技术”专题主编《兵器装备工程学报》、《Technology audit and production reserves》编委，《精密成形工程》通讯编委 Scientific Committee Member of ICHSF2018 & ICHSF2021 下列学术期刊兼职审稿人—— Journal of Materials Processing Technology, Journal of manufacturing processes, Scripta Materialia, Materials Science Engineering-A, Materials&Design, International Journal of Advanced Manufacutring Technology, International Journal of Machine Tools and Manufacture, 塑性工程学报、锻压技术，有色金属学报(中英)、哈工大学报、西安交大学报、北航学报、西工大学报、材料科学与工艺等