近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Xu, Xunhu; Kang, Qingxin; Wang, Guofeng; Liu, Yongkang; Li, Zhenlun; Luo, Shuyi Skillfully enhanced the oxidation resistance of the traditional TA15 titanium alloy through TiB ceramic phase with network distribution Ceramics International, 2023
Zhan, Liqiang; Hou, Jiabin; Wang, Guofeng; Chen, Yuqing; Luo, Shuyi; Kang, Qinxin; Li, Zhenlun; Xu, Xunhu Study on Mechanical Alloying Behavior and Thermal Stability of Hfmonbtati Refractory High-Entropy Alloy SSRN, April 25, 2023
Luo, Shuyi; Luo, Junting; Kang, Qingxin; Xu, Xunhu; Wang, Guofeng Study of Tissue Evolution and Properties of Zrti/Gh4169 Alloys Prepared by Low-Temperature Sintering of Sps SSRN, February 23, 2023
Kang, Qingxin; Xu, Xiaoting; Wang, Guofeng; Li, Zhenlun; Luo, Shuyi Hot Corrosion and Oxidation Behavior of Network Structured TiBw/TA15 Composite at 1073 K Journal of Materials Engineering and Performance, 2023
Kang, Qingxin; Xu, XiaoTing; Wang, Guofeng; Zhou, Tongxu; Wang, ChunxuEnhanced high temperature oxidation resistance of discontinuous distributed TiBw reinforced TA15 titanium alloy by simple pack cementation method Corrosion Science, v 216, May 15, 2023
Kang, Qingxin; Xu, Xiaoting; Wang, Guofeng; Luo, Shuyi; Zhan, Liqiang Hot corrosion behavior of network structured TiBw/TA15 composite with Na2SO4 film at 800 °C Materials Characterization, v 195, January 2023
Luo, Shuyi; Luo, Junting; Kang, Qingxin; Xu, Xunhu; Wang, Guofeng Study of microstructure evolution and properties of ZrTi/GH4169 alloys prepared by low-temperature sintering of SPS Materials Characterization, v 201, July 2023
Liu, Yongkang; Wang, Guofeng; Chen, Yuqing; Kang, Qingxin; Luo, Shuyi; Li, Zhenlun; Xu, Xunhu; Liu, Qing; Sui, XiaochongAir atmosphere diffusion bonding of Al–Mg–Li alloy using Cu nano-coating interlayer: Microstructural characterization and formation mechanisms (Open Access) Materials and Design, v 215, March 2022
Li, Zhenlun; Kang, Qingxin; Wang, Guofeng; Sui, Xiaochong; Liu, Yongkang; Luo, Shuyi Microstructure evolution during hot-packed rolling and mechanical properties anisotropy of as-rolled network-structured TiBw/TA15 composites Materials Science and Engineering A, v 849, August 1, 2022
Li, Huan; Zhang, Wencong; Yang, Jianlei; Pan, Jinqi; Wang, Guofeng; Chu, Guannan 。Microstructure evolution and deformation mechanism of Ti-22Al-25 Nb alloy under current-assisted compression 。Journal of Alloys and Compounds, v 923, November 25, 2022
Kang, Qingxin; Wang, Guofeng; Liu, Yongkang; Chen, Yuqing; Luo, Shuyi。Experimental and theoretical study for hot corrosion behavior of network structured TiBw/TA15 composite with NaCl film at 800 ℃ Corrosion Science, v 206, September 2022
Luo, Shuyi; Luo, Junting; Liu, Yongkang; Li, Zhenlun; Wang, Guofeng。Finite Element Simulation and Low-Temperature Spark Plasma Sintering for Ti–Zr–Ni Alloy。 Advanced Engineering Materials, v 25, n 5, March 2023
Xu, Xunhu; Kang, Qingxin; Liu, Yongkang; Li, Zhenlun; Wang, Guofeng Effects of electropulsing treatment on the microstructural evolution of hot-rolled TiBw/TA15 composite billet with a network architecture Materials Characterization, v 194, December 2022
王国峰; 刘永康; 刘青; 张靖轩; 王月林 Ni-Co纳米镀层为中间层的TC4钛合金低温扩散连接 锻压技术 2022-11-24
王国峰; 刘永康; 陈玉清; 张靖轩; 王月林 电沉积Ni-Co纳米镀层热稳定性研究及低温扩散连接应用 精密成形工程 2022-04-10
王珏; 张晓巍; 张英伟; 王国峰; 何晓健TA32钛合金双层结构零件超塑成形/扩散连接工艺塑性工程学报2022-03-22
梁继业; 杜志豪; 林海朋; 王国峰 工业级5083铝合金市域车车门正反胀超塑性成形工艺 塑性工程学报 2022-01-21
Wang, Guofeng; Sui, Xiaochong; Liu, Qing; Liu, Yongkang Fabricating Ti2AlNb sheet with high tensile strength and good ductility by hot packed rolling the spark plasma sintered pre-alloyed powder Materials Science and Engineering A, v 801, January 13, 2021
Wang, Songhui; Zhang, Wencong; Wang, Haixuan; Yang, Jianlei; Chen, Wenzhen; Cui, Guorong; Wang, Guofeng Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling Materials Science and Engineering A, v 803, January 28, 2021
Liu, Qing; Wang, Guofeng; Liu, Yongkang; Sui, Xiaochong; Chen, Yuqing; Luo, Shuyi Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgySource: Materials Science and Engineering A, v 809, March 30, 2021
Liu, Qing; Wang, Guofeng; Sui, Xiaochong; Xu, Ye; Liu, Yongkang; Yang, Jianlei Ultra-fine grain TixVNbMoTa refractory high-entropy alloys with superior mechanical properties fabricated by powder metallurgy Journal of Alloys and Compounds, v 865, June 5, 2021
Liu, Yongkang; Lai, Xiaoming; Gu, Yibin; Wang, Bo; Wang, Guofeng; Liu, Qing Investigation on the ageing behaviour and hardening mechanisms of 5A90 Al–Li alloy U-shaped parts formed by electric resistance heating forming-quenching processJournal of Alloys and Compounds, v 869, July 15, 2021
Liu, Yongkang; Wang, Guofeng; Liu, Qing; Sui, Xiaochong; Luo, Shuyi; Li, Zhenlun; Kang, Qingxin The defining role of ultrasonic on the relaxed GBs and superior thermal stability of copper coatingsSource: Materials Characterization, v 178, August 2021
Sui, Xiaochong; Wang, Guofeng; Liu, Qing; Liu, Yongkang; Chen, Yuqing Fabricating Ti2AlNb sheet with tensile strength higher than 1500 MPa by hot packed rolling spark-plasma-sintered pre-alloyed Ti2AlNb powder at the B2 %2B O phase fieldSource: Journal of Alloys and Compounds, v 876, September 25, 2021
Kang, Qingxin; Wang, Guofeng; Liu, Qing; Sui, Xiaochong; Liu, Yongkang; Chen, Yuqing; Luo, Shuyi; Li, Zhenlun Atomic level insights into the Ti2AlC oxidation mechanism by the combination of density functional theory and ab initio molecular dynamics calculationsSource: Corrosion Science, v 191, October 2021
Kang, Qingxin; Wang, Guofeng; Liu, Qing; Sui, Xiaochong; Liu, Yongkang; Chen, Yuqing; Luo, Shuyi; Li, Zhenlun Theoretical research for oxidation mechanism of α-Ti: A combination of DFT and ab initio molecular dynamics studySource: Vacuum, v 193, November 2021
Kang, Qingxin; Wang, Guofeng; Liu, Qing; Sui, Xiaochong; Liu, Yongkang; Chen, Yuqing; Luo, Shuyi; Li, Zhenlun Investigation for oxidation mechanism of CrN: A combination of DFT and ab initio molecular dynamics studySource: Journal of Alloys and Compounds, v 885, December 10, 2021
Zhihao Du；Chunxu Wang；Guofeng Wang。The superplastic forming/diffusion bonding of TA7 titanium alloy for manufacturing hollow structure with stiffeners。Journal of Manufacturing Processes。23 November 2021
徐晔; 王国峰; 林海朋; 王忠平; 孙红霞 国产5083铝合金高速磁浮司机室蒙皮成形研究。塑性工程学报2021-11-25
刘永康;王少华;赖小明;李振伦;王博 基于元胞自动机的5B70铝合金载人密封舱室加强筋组织演化研究 载人航天2021-08-15
王雁飞;林海朋;隋礼平;闫俊材;王国峰 均匀快速超塑成形技术在市域车铝合金车头蒙皮上的应用 塑性工程学报 2021-06-28 14:14
刘永康;王博;赖小明;刘洋;王国峰 密封舱结构材料5B70铝合金高温压缩实验与晶体塑性模拟研究 载人航天 2021-04-15
Zhao, Zhiyong； Wang, Guofeng; Zhang, Yanling;Gao, Jun; Hou, Hongliang。Microstructure Evolution and Mechanical Properties of Ti-6Al-4V Alloy Prepared by Multipass Equal Channel Angular Pressing.Journal of Materials Engineering and Performance, v 29, n 2, p 905-913, February 1, 2020
Liu, Yang ; Zhang, Jingxuan; Li, Zhibo; Liu, Qi; Wang, Guofeng.Numerical simulation and experimental research on hot extrusion of 5B70 aluminum alloy complex end frame part.Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020
Li, Xiao ; Wang, Guofeng; Zhang, Jingxuan; Liu, Yongkang .Electrically assisted superplastic forming/diffusion bonding of the Ti2AlNb alloy sheet. International Journal of Advanced Manufacturing Technology, v 106, n 1-2, p 77-89, January 1, 2020
王国峰; 张建威; 张晓巍; 李骁; 王海伦，2B06铝合金双层结构件DB&SPF组合工艺研究，锻压技术2020-07-15
何广忠; 吴越; 梁继业; 王国峰; 张靖轩.S355J2W钢转向架盖板自阻加热成形工艺研究.塑性工程学报.2020-03-12
王国峰; 刘青; 石文展; 李丹峰.超细晶WC–10%Co硬质合金三刃刀具放电等离子烧结工艺研究.航空制造技术.2020-02-01
Q S Xiao, J W Zhang, G F Wang, Z H Du, H Fang. 3-D modeling and finite elements analysis of KM6 motion simulator[J]. IOP Conference Series: Materials Science and Engineering,2019,504(1).
王国峰; 李骁; 李丹峰; 顾义斌; 方慧Ti2AlNb合金板材自阻加热中温度分布及低电流密度对B2%2BO层片组织的作用（英文）Journal of Central South University2019-03-15
Lixiao Wang, Guofeng; Gu, Yibin; Yang, JianleiElectrically assisted diffusion bonding of Ti2AlNb alloy sheet using CP-Ti foil interlayer: Microstructural characterization and mechanical tests.Materials Science and Engineering A, v 744, p 733-745, 28 January 2019
Jiao, Xueyan; Chen, Wenzhen; Yang, Jianlei; Zhang, Wencong; Wang, Guofeng. Microstructure evolution and high-temperature tensile behavior of the powder extruded 2.5？vol% TiBw/TA15 composites. Source: Materials Science and Engineering A, v 745, p 353-359, 4 February 2019
Wang, Guo-feng; Li, Xiao; Li, Dan-feng; Gu, Yi-bin; Fang, Hui.Temperature distribution and effect of low-density electric current on B2%2BO lamellar microstructure of Ti2AlNb alloy sheet during resistance heating. Journal of Central South University, v 26, n 3, p 550-559, March 1, 2019
Ju, Jong-Min ; Wang, Guofeng; Kim, Dang-Ho; Yu, Tok-Chol; Pak, Kyong-Song. The enhanced and polarized Raman spectra on the spherical aluminum powders encapsulated within graphene nanosheets. Source: Fullerenes Nanotubes and Carbon Nanostructures, v 27, n 4, p 279-288, April 3, 2019
Yang, Jianlei ; Wang, Guofeng; Park, Jeong Min; Kim, Hyoung Seop. Microstructural behavior and mechanical properties of nanocrystalline Ti-22Al-25Nb alloy processed by high-pressure torsion. Source: Materials Characterization, v 151, p 129-136, May 2019
Zhao, Zhiyong ; Wang, Guofeng; Zhang, Yanling; Wang, Yaoqi; Hou, Hongliang. Fast recrystallization and phase transformation in ECAP deformed Ti–6Al–4V alloy induced by pulsed electric current. Source: Journal of Alloys and Compounds, p 733-741, 25 May 2019
Wang, Guofeng ; Liu, Qing; Yang, Jianlei; Li, Xiao; Sui, Xiaochong; Gu, Yibin; Liu, Yongkang. Synthesis and thermal stability of a nanocrystalline MoNbTaTiV refractory high-entropy alloy via mechanical alloying. International Journal of Refractory Metals and Hard Materials, v 84, November 2019
Liu, Qing ; Wang, Guofeng; Sui, Xiaochong;Liu, Yongkang; Li, Xiao; Yang, Jianlei . Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering. Journal of Materials Science and Technology, v 35, n 11, p 2600-2607, November 2019
王珏; 张晓巍; 王国峰.Ti2AlNb合金超塑成形/扩散连接工艺.锻压技术.2019-11-20
刘奇; 赛音; 高慧; 李保永; 王国峰.5B70铝合金热挤压成形工艺研究.航天制造技术.2019-10-25
王国峰; 王海伦; 梁继业; 贾辉辉; 顾一斌 轨道交通用工业AA5083铝合金快速超塑性成形技术研究塑性工程学报2019-04-25
杨建雷; 曾婷; 王国峰; 李骁; 张凯锋粉末冶金Ti-22Al-25Nb合金高温变形本构模型热加工工艺2019-03-05
苑世剑; 刘伟; 王国峰; 何祝斌; 凡晓波轻合金复杂薄壁构件流体压力成形技术新进展上海航天2019-04-25
You Li, Guofeng Wang*, Siyu Liu, Shanshan Zhao, Kaifeng Zhang. The preparation of Ni/GO composite foils and the enhancement effect of GO in mechanical properties[J]. Composites Part B: Engineering. 2018B135,43-48
Wang, Guofeng ; Li, You; Liu, Siyu; Yang, Jianlei;Yang, Mo Micro deep drawing of T2 copper foil using proportional decreased toolsSource: International Journal of Advanced Manufacturing Technology, v 95, n 1-4, p 277-285, March 1, 2018
Jianlei Yang, Guofeng Wang*, Xiaoyan Jiao, You Li, Qing Liu. High temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy [J]. Materals Characterization. 2018, 137: 170-179. (SCI收录, IF=2.714, JCR Q1区)
Jianlei Yang, Guofeng Wang*, Xueyan Jiao, Yibin Gu, Qing Liu, You Li. Current-assisted diffusion bonding of the extruded Ti-22Al-25Nb alloy by spark plasma sintering: interfacial microstructure and mechanical Properties. Journal of Materials Engineering and Performance, 2018. (SCI收录, IF=1.313)
Jianlei Yang, Guofeng Wang*, Xueyan Jiao, You Li, Kaifeng Zhang. Dynamic spheroidization behavior of the lamellar Ti-22Al-25Nb alloy during hot compression. Materials Science and Technology, 2018, 34: 961-967. (SCI收录, IF=1.538)
Jianlei Yang, Guofeng Wang*, Tao Zhao, Xueyan Jiao, You Li. Study on the experiment and simulation of titanium alloy bellows via current-assisted forming technology[J]. JOM. 2018. (SCI收录, IF=1.886)
Shenjinghao, Guofeng Wang*, Fabrication of a high strength and ductility Ti？22Al？25Nb alloy from high energy ball-milled powder by spark plasma sintering. Journal of Alloys and Compounds 741 (2018) 1112-1120
Fang, Hui; Wang, Guofeng; Liu, Siyu; Li, XiaoResearch on Resistance Heating Behavior of High-Strength Steel and its Hot-Stamping FormingSource: Journal of Materials Engineering and Performance, v 27, n 9, p 4829-4837, September 1, 2018
Li, Xiao ; Wang, Guofeng; Gu, Yibin; Li, Danfeng;Fang, Hui Investigation on electrically-assisted diffusion bonding of Ti2AlNb alloy sheet by microstructural observation, mechanical tests and heat treatmentSource: Materials and Design, v 157, p 351-361, 5 November 2018
Wang, Guofeng; Li, Xiao; Liu, Siyu; Gu, YibinImproved superplasticity and microstructural evolution of Ti2AlNb alloy sheet during electrically assisted superplastic gas bulgingSource: International Journal of Advanced Manufacturing Technology, v 99, n 1-4, p 773-787,2018
Zhao Zhiyong, Wang Guofeng, Hou Hongliang, et al. The efect of pulsed current on the shear deformation behavior of Ti- 6Al-4V alloy[J]. Scientific Reports, 2018, 8: 14748-14756. (SCI)
Zhao Zhiyong, Hou Hongliang, Wang Guofeng, et al. Effect of Brass Sheathing on ECAP of Ti-6Al-4V Alloy by Deform-3D Simulation and Experimental Analysis[C]. IOP Conference Series: Materials Science and Engineering, 301: 1-7. (EI)2018
Wang, Guofeng ; Jia, Huihui; Gu, Yibin; Liu, Qing.Research on quick superplastic forming technology of industrial aluminum alloys for rail trafficSource: Defect and Diffusion Forum, v 385 DDF, p 468-473, 2018, Superplasticity in Advanced Materials - ICSAM 2018
赖小明;王国峰;张玉良;王博;顾义斌.基于5A90板材的电致裂纹修复模拟研究.精密成形工程2018-11-10
赵志勇; 侯红亮; 张艳苓; 吴凡; 王国峰脉冲电流对0.27%置氢Ti-6Al-4V合金变形行为的影响材料研究学报2018-05-25
GU YIBIN 轨道交通用5083铝合金超塑性胀形极限研究 热加工技术 2018
方慧，王国峰，刘思宇. S355J2W钢自阻加热弯曲成形回弹控制与质量分析. 哈尔滨工业大学学报. 2018，50(11)
Zhao Zhiyong, Wang Guofeng, Hou Hongliang, et al. Influence of High-Energy Pulse Current on the Mechanical Properties and Microstructures of Ti-6Al-4V Alloy[J]. Journal of Materials Engineering & Performance, 2017, 26(7):1-8. (SCI)
Jianlei Yang, Guofeng Wang, Xiao Li, Xuesong Wu. Current auxiliary hot-stamping of advanced HSS and experimental evaluation. Materials Science and Technology 33，2017 (355-362) (SCI, IF=1.008)
Sim, Kyong-Ho; Wang, Guofeng; Ju, Jong-Min. Microstructure and mechanical properties of a Ti-22A1-25Nb alloy fabricated from elemental powders by mechanical alloying and spark plasma sintering.JOURNAL OF ALLOYS AND COMPOUNDS 卷: 704 页: 425-433 出版年: MAY 15 2017 (SCI, IF=3.014)
Sim, Kyong-Ho; Wang, Guofeng Influence of mechanical alloying on the microstructure and mechanical properties of powder metallurgy Ti2AlNb-based alloy powder technology Volume 317, 15 July 2017, Pages 133–141 (SCI, IF=2.759)
Sim, Kyong-Ho; Wang, Guofeng Enhanced ductility of a bimodal grain structure Ti-22Al-25Nb alloy fabricated by spark plasma sintering Advanced Engineering Materials, 2017, 19(6): 8.2017 (SCI, IF=1.817)
Jianlei Yang, Guofeng Wang , Xueyan Jiao, Xiao Li, Chao Yang。Hot deformation behavior and microstructural evolution of Tie22Ale25Nbe1.0B alloy prepared by elemental powder metallurgy。Journal of Alloys and Compounds 695 (2017) 1038-1044 (SCI, IF=3.014)
Microstructure evolution and mechanical properties of P/M Ti-22Al-25Nb alloy during hot extrusion MSEA 2017 Volume 699, 24 June 2017, Pages 210–216(SCI, IF=2.647)
Guofeng Wang, Siyu Liu, Qi Liu, Shanshan Zhao, Xiangyu Zhao, You Li。Micro-arrayed stretch drawing process of nanocrystalline Ni-Co foils with soft-male-die。Journal of Materials Processing Technology 240 (2017) 209–216 (SCI, IF=2.359)
Jong-Min Ju. Facile synthesis of graphene reinforced Al matrix composites with improved dispersion of graphene and enhanced mechanical properties. Journal of Alloys and Compounds,20-Feb-2017 DOI information: 10.1016/j. JOURNAL OF ALLOYS AND COMPOUNDS 卷: 704 页: 585-592 出版年: MAY 15 2017 (SCI, IF=3.014)
Guofeng Wang*, You Li, Siyu Liu, Chao Yang. Electro-deposition of Ni-Co/GO nano-composite and deformational behavior of tension and bulging[J]. Journal of Composite Materials. 2017, 51(25): 3505-3513.
You Li, Guofeng Wang*, Siyu Liu, Jianlei Yang, Chao Yang, Kaifeng Zhang. Drawability and size effects for micro-arrayed deep drawing of Ni-Co/GO nanocomposite foils[J]. Journal of Materials Processing Technology. 2017, 249: 221-228.
Guofeng Wang, Shanshan Zhao, You Li, Chao Yang, and Siyu Liu. Superplasticity and Micro-arrayed Deep-Drawing Behavior of Ni-Co/GO Nanocomposite. Journal of Materials Engineering and Performance, 2017, 26(10): 4760-4767. (SCI, IF=1.331)
Sim, Kyong-Ho; Zhang feihu, Wang, Guofeng Experimental comparison of ground surface characteristics for P/M Ti2AlNb-based alloy using CBN and diamond grinding wheels。The International Journal of Advanced Manufacturing Technology,2017, (6): 1-10.
Jianlei Yang, Xueyan Jiao, Wenzhen Chen*, Wencong Zhang, Guofeng Wang. A Novel Extrusion for Manufacturing TiBw/Ti6Al4V Composite Tubes with a Quasi-Continuous Reinforced Structure[J]. Materials. 2017, 10, 375. (SCI收录, IF=2.654)
刘奇; 王国峰; 李保永; 秦中环; 李信。基于Marc的小弯曲半径薄壁管材成形有限元分析第十五届全国塑性工程学会年会论文集2017-10-13
顾义斌; 梁继业; 何广忠; 杨超; 王国峰轨道交通用国产供货态5083铝合金超塑性研究第十五届全国塑性工程学会年会论文集2017-10-13
王国峰 李骁 李丹峰 脉冲电流在塑性加工中的作用 航空制造技术 封面文章，2017
赖小明 杜志豪 王国峰王国欣莫桂冬月壤取芯钻具热特性有限元分析深空探测学报2017年06期
杨建雷 曾婷，王国峰*，李骁，张凯锋 粉末冶金Ti-22Al-25Nb合金高温变形本构模型 热加工技术 2017
王国峰,曹凤超,杨超,张乐陶,赵淘,张凯峰. 电流辅助钛波纹管成形温度场控制及模拟[J].航空制造技术, 2017, 9: 87-91
Chan, K.C., Wang, G.F., Wang, C.L. and Zhang, K.F. Low temperature superplastic gas pressure forming of electrodeposited Ni/SiCp nanocomposites. Materials Science & Engineering A , 2005(404), 108-116. (SCI: 334QR)
Chan, K.C., Wang, G.F., Wang, C.L. and Zhang, K.F. Low temperature and high strain rate superplasticity of the electrodeposited Ni/ Si3N4 (W) composite. Scripta Material 2005 (53), 1285. (SCI: 004TO)
Wang, G.F., Chan, K.C., and Zhang, K.F. Low temperature superplasticity of nanocrystalline electrodeposited Ni-Co alloy. Scripta Material 2006 (54), 765. (SCI: 004TO)
Guofeng Wang, Kaifeng Zhang, Guoqing Chen. Numerical simulation and experimental research on superplasticity of ceramic/ceramic laminated composite. Ceramics International. 2005(31), 923-927. (SCI: 958RC)
Kaifeng Zhang, Guofeng Wang. Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite. J Europ Ceram Soc.2006 (26), 253-257. (SCI: 996FK)
K. F. Zhang, G. F. Wang, D. Z. Wu and Z. R. Wang. Research on the controlling of the thickness distribution in superplastic forming. Journal of Materials Processing Technology, 2004(151), 54-57. (SCI: 144WL)
X.L. Wang, G. F. Wang, K. F. Zhang, Fabrication of Fine grained Nb–16Si Refractory alloy and its sinter forging with short process. Acta Metallurgica Sinica. 2009(45):1030-1034
GF Wang, KF Zhang. Superplatistic Properties of Al2O3/Ni-Mn Nanocomposite fabricated by electrodeposition. Journal of Materials Science & Technology.2010(26)，625-628
X.L. Wang, Wang Guofeng. Effect of mechanical alloying on microstructure and mechanical properties of hot-pressed Nb–16Si alloys Materials Science and Engineering A 527 (2010) 3253–3258
Wang Guofeng, Zhang Jihong. Densification and Mechanical Properties of B4C Based Composites Sintered by Reaction Hot-pressing. Key Engineering Materials Vols. 434-435 (2010) pp 24-27
G.F. Wang, H. Jin, K.F. Zhang, Z. Lu. Plastic deformation simulation of composite based on mesoscopic field dislocation mechanics finite element model. 亚洲微纳米成形技术研讨会AWMFT-2009，48-52
Guofeng Wang, Liu Lin, Wang Haiyang, Kaifeng Zhang. Toughness and Superplastic Deformation of Laminated Ceramic. Key Engineering Materials. 2008(368-372), 1799-1802. (SCI: BHO67)
G.F. Wang, S. Ding, C.L. Wang, T.G. Nieh. Superplasticity of Nanostructured Nickel Alloy and Composite Fabricated by Electrodeposition. Material science forum. 2007(551), 607-612. (SCI: BGH40)
G.F. Wang, D.Z. Wu, C.W. Wang, W.B. Han. Numerical Simulation and Experimental Research on Superplasticity of Ceramic/Ceramic Laminated Composite. Material science forum. 2007(551), 533-538. (SCI: BGH40)
Wang Guofeng*, Zhang Kaifeng, Jin Hua, Liu Boyang, Yang Boping。Low-temperature superplasticity of Al2O3(p)/Ni-Co nanocomposites with various Al2O3 particle sizes。Material and design. 2012(33):399-404
Wang Guo-feng ，Jiang Shao-song , Lu zhen ， Zhang Kai-feng . Preparation and tensile properties of Al2O3/Ni-Co nanocomposites. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA . 2011(21):374-379
Xu Guihua, Wang Guofeng. Effect of rare earth Y on oxidation behavior of NiAl-Al(2)O(3) . TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA . 2011(21):362-368
Wang Guofeng*, Zhang Kaifeng, Development of mesoscopic field dislocation mechanics finite element model and application in the micro-plasticity。Materials Research Innovations。2011,15:32-35
GF Wang，Z Lu, CW Wang, QW Ren, KF Zhang. Fabrication and mechanical properties of Al2O3–Si3N4/ZrO2–Al2O3 laminated composites. Powder technology. 2011(214)188-193.
T.Richeton, GF Wang, C.Fressengeas. Continuity constraints at interfaces and their consequences on the work hardening of metal-matrix composites. Journal of the Mechanics and Physics of Solids. 2011(59)2023-2043
Wang, G.F.;Wang, B. ; Jiang, S.S.; Zhang, K.F. Pulse current auxiliary thermal deep drawing of SiCp/2024Al composite sheet with poor formability. Journal of Materials Engineering and Performance, v 21, n 10, p 2062-2066, October 2012
Wang, B. ; Wang, G.F.; Jiang, S.S.; Zhang, K.F. Effect of pulse current on thermal performance and deep drawing of SiCp/2024Al composite sheet。International Journal of Advanced Manufacturing Technology, p 1-5, 2012
Guofeng Wang , Shaosong Jiang , Zhen Lu , Kaifeng Zhang Superplastic Bulging of Nanocrystalline Ni-Co Alloy with Different Heating Methods Materials Science Forum Vol. 735 (2013) pp 136-139
Zhang Kaifeng , Jiang Shaosong , Lu Zhen , Wang Guofeng SUPERPLASTICITY OF Nb-Si-Fe AND TiAl INTERMETALLICS Materials Science Forum Vol. 735 (2013) pp 113-119
Guofeng Wang, Yijin Wang, Dongxuan Sun, Xiangxiang Dai, and Kaifeng Zhang. Finite element modeling and optimization of quick super-plastic forming for the side wall outer panel of London metro vehicle. AIP Conference Proceedings 1532, 279 (2013)
Guo-feng Wang*, Xue-Song Wu, Chao Sun, Shu-fen Liu, Auxiliary current hot forming of high-strength steel for automobile parts。 Procedia Engineering 81 ( 2014 ) 1701 – 1706
Liu Bo-tao, Qi Yan, Han Xiao, Lv Shi-zeng, Wang Guo-feng。The simulation and analysis of the new type large vacuum container flange welding process。Applied Mechanics and Materials Vol. 472 (2014) pp 671-676
Wang guofeng, Sun chao, Liu shufen, Yang mo. Research on quick superplastic forming technology of aluminum alloy complex components. Materials science and engineering technology 45(9),2014,854-859\
Wang, Chang-Wen ; Zhao, Tao; Wang, Guofeng; Gao, Jing; Fang, He Superplastic forming and diffusion bonding of Ti-22Al-24Nb alloy Source: Journal of Materials Processing Technology, v 222, p 122-127,August 2015
Wang, Guofeng ; Zhao, Tao; Wang, Yuelin; Wu, Xuesong; Dai, Xiangxiang; Liu, Qi Current assisted superplastic forming of titanium alloySource: MATEC Web of Conferences, v 21,August 10, 2015, 4th International Conference on New Forming Technology, ICNFT 2015
Wang, Guo Feng ; Zhao, Tao; Yang, Mo; Zhao, Xiang Yu Current assisted superplastic forming of titanium alloy bellowsSource: Materials Science Forum, v 838-839, p 135-142, 2016,Superplasticity in Advanced Materials, ICSAM 2015
You Li,Guofeng Wang,Qi Liu. Ni/Go nanocomposites and its plasticity. Manufacturing Review. 2015
Wang, Guofeng ; Yang, Jianlei; Jiao, Xueyan Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by elemental powder metallurgy Source: Materials Science and Engineering A, v 654, p 69-76, January 27, 2016 (SCI, IF=2.647)
You Li,Guofeng Wang,Qi Liu. Ni/Go nanocomposites and its plasticity. Manufacturing Review. 2015
Zhao, Zhiyong; Hou, Hongliang; Zhang, Ning; Effect of high-energy electro-pulses on the compression deformation behavior of Ti-6Al-4V alloy. METALS AND MATERIALS INTERNATIONAL？ 卷: 22 期: 4 页: 585-593 出版年: JUL 2016 (SCI, IF=1.815)
李超; 王国峰; 潘显荣; 顾义斌电流辅助高强钢板热成形工艺数值模拟研究精密成形工程2016-09-10
朱丽; 张晓巍; 王国峰. 基于PAMSTAMP2G的四层超塑成形/扩散连接构件的数值模拟 优先出版热加工工艺2016-01-15 10:
朱丽; 迟彩楼; 张晓巍; 王国峰大型钛合金双层板超塑成形/扩散连接工艺仿真制造技术与机床2016-12-02
纳米材料微阵列超塑微成形机理与尺度效应王国峰; 李优; 刘奇; 赵相禹精密成形工程2015-05-10
TC4钛合金中空叶片扩散连接-超塑成形技术 优先出版王国峰; 赵相禹; 孙超; 杨默锻压技术2015-04-23
王国峰； 骆俊廷； 王长文； 蒋少松； 卢振,电沉积纳米复合材料的超塑性研究. 材料科学与工艺. 2013-08-15
王国峰;金华;张凯锋。添加剂对电沉积Al2O3/Ni-Co复合材料力学性能的影响。复合材料学报，2011(28):160-164.
王国峰, 夏伟宁，张凯锋. Al2O3颗粒增强Ni-Mn纳米复合材料的超塑性 热加工工艺 2011,40(2)73-75
王国峰等: 快速超塑性的研究与应用.塑性工程学报.2010(6):55-60
王国峰，汪海洋．烧结助剂对反应热压烧结B4C复合材料性能的影响．复合材料学报，2009(4):102-107
张旭昀, 王国峰. 电沉积纳米镍合金及其复合材料的超塑性. 中国有色金属学报，2007(11):175.
王国峰, 张凯锋, 韩文波, 王长丽。电沉积Ni/Si3N4 (W)纳米复合材料的力学性能与超塑性研究。 塑性工程学报， 2005(52):175.
王国峰, 卢振, 金华, 张凯锋. Al2O3颗粒增强Ni-Mn纳米复合材料的低温超塑性研究. 第十一届全国塑性工程学术年会2009 年
王国峰, 张凯锋, 韩文波, 王振杰, 王长文. 陶瓷基层状复合材料超塑成形数值模拟与实验研究. 航空材料学报, 2005(25):35-39.
王国峰, 刁法玺, 吴德忠, 张凯锋. 板料成形的弹塑性动力显式有限元软件开发与应用. 锻造与冲压，2006(5):23.
张凯锋, 王国峰, 王振杰, 王长文, 韩文波. Al2O3 / 3Y-TZP 层状复合材料的制备及其超塑性能. 复合材料学报, 2005, 22(3):64-69.
王中阳，王国峰，赖小明，张凯锋。控制厚度分布的正反向超塑胀形工艺的有限元分析。材料科学与工艺, 2004, 12(3):279-282.
张凯锋，王国峰，韩文波. 纳米陶瓷的热压烧结及超塑成形（英）。塑性工程学报，2004,11(1):84.
Wang F, Zhang KF, Wang GF. Microstructure and Mechanical Properties of Textured Alumina-Zirconia Composites Prepared by Compressive Deformation. JOURNAL OF INORGANIC MATERIALS. 2008(23), 1141-1146. (SCI:374KD)
Yu JL, Zhang KF, Wang GF. Superplasticity of multiphase fine-grained Nb-16Si-2Fe refractory alloy. INTERMETALLICS 2008(16), 1167-1171. (SCI: 369RD)
X.F. Li, K.F. Zhang, G.F. Wang. Nanoscale MorpholoNanoscale Morphology in Tensile Fracture of a Brittle Amorphous Ribbon. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 2008(24):745-749. (SCI: 894FC)
Yu JL, Zhang KF, Yu J, Wang GF.Superplasticity of multiphase refractory Nb-16Si-2Fe in situ composite. ACTA METALLURGICA SINICA. 2008(44):933-936. (SCI: 342LV)
Zhang, Kaifeng, Ding Shui, Wang, Guofeng. Different superplastic deformation behavior of nanocrystalline Ni and ZrO2/Ni nanocomposite. Materials letters. 2008(62), 719-722. (SCI: 260ST)
Wang F, Zhang KF, Wang GF. Texture in superplastically deformed alumina-zirconia composites. Materials Science & Engineering A, 2008(491), 476-482. (SCI: 334QR)
X.F. Li, K.F. Zhang, G.F. Wang, W.B. Han. Plastic deformation behavior of amorphous Fe78Si9B13 alloy at elevated temperature. Journal of Non-Crystalline Solids 354 (2008) 1061–1065. (SCI: 263KT)
丁水; 张凯锋; 王国峰; 电沉积ZrO_2/Ni纳米复合材料低温高应变速率超塑性的研究. 航空材料学报. 2008(28):34-37
W.B. Han, K.F. Zhang, G.F. Wang. Superplastic forming and diffusion bonding for honeycomb structure of Ti–6Al–4V alloy. Journal of Materials Processing Technology. 2007(183), 450-454. (SCI: 144WL)
X.F. Li, K.F. Zhang, G.F. Wang. Preparation and tensile properties of amorphous Fe78Si9B13/nano-Ni laminated composite. Materials letters. 2007(61), 4901-4905. (SCI: 260ST)
K.C. Chan, C.L. Wang, G.F. Wang. Superplastic deformation behavior of electrodeposited nickel matrix nanocomposite. Material science forum. 2007(551), 521-526. (SCI: BGH40)
W.B. Han, D.Z. Wu, G.F. Wang, M.J. Tong. Superplastic Forming and Diffusion Bonding for Four-Layer Sheets Structure of Nickel-Base Superalloy. Material science forum. 2007(551), 163-168. (SCI: BGH40)
W.B. Han, Z.J. Wang, G.F. Wang. Synthesis and superplastic deep drawing of TiAl alloy. Material science forum. 2007(551), 467-472. (SCI: BGH40)
S. Ding, K.F. Zhang, G.F. Wang. Superplasticity and Microstructure Evolution of Electrodeposited Nanocrystalline Nickel. Material science forum. 2007(551), 539-544. (SCI: BGH40)
S. Ding, K.F. Zhang, G.F. Wang. Superplastic Micro Deep Drawing of Fine-Grained Nickel at Elevated Temperatures. Material science forum. 2007(551), 545-550. (SCI: BGH40)
X.F. Li, K.F. Zhang, W.B Han, G.F. Wang. Gas pressure forming of amorphous Fe78Si9B13 alloy. Material science forum. 2007(551), 575-580. (SCI: BGH40)
Li XF, Zhang KF, Wang CL, Han WB, Wang GF. Microstructural and microhardness variation of amorphous Fe78Si9B13 alloy during bend stress relaxation. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 2007(23):253-256. (SCI: 894FC)
张凯锋; 丁水; 王国峰; 电沉积制备纳米镍的拉伸变形行为. 材料科学与工艺. 2007(15):35-39.
张凯锋; 丁水; 雷鹍; 王国峰; 电沉积纳米镍薄板的超塑微拉深性能. 中国机械工程. 2007(18):983-987.
Zhang KF, Yin DL, Wang GF, et al. Superplastic deformation behavior of hot-rolled AZ31 magnesium alloy sheet at elevated temperatures. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION. 2006(21):1-6. (SCI: 092GD)
Luo JT, Zhang KF, Wang GF, et al. Fabrication of fine-grained Si3N4-Si2N2O composites by sintering amorphous nano-sized silicon nitride powders. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION. 2006(21):97-99. (SCI: 092GD)
Zhang, Kai-Feng; Yin, De-Liang; Wang, Guo-Feng; Han, Wen-Bo. Microstructure evolution and fracture behavior in superplastic deformation of hot-rolled AZ31 Mg alloy. Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2005,25(1): 5-10.
Yin, D.L.; Zhang, K.F.; Wang, G.F.; Han, W.B. Warm deformation behavior of hot-rolled AZ31 Mg alloy. Materials Science and Engineering A, 2005,392(1): 320-325. (SCI: 334QR)
D.L. Yin, K.F. Zhang, G.F. Wang and W.B. Han. Superplasticity and cavitation in AZ31 Mg alloy at elevated temperatures. Materials Letters, 2005, 59(14) :1714-1718. (SCI: 260ST)
Han Wenbo, Zhang Kaifeng, Wang Guofeng, Zhang Xiaojun. Superplastic forming and diffusion bonding for sandwich structure of Ti-6Al-4V alloy. Journal of Materials Science and Technology, 2005, 21(1): 60-62. (SCI: 894FC)
Junting Luo, Kaifeng Zhang, Guofeng Wang and Guoqing Chen. Superplastic Forming of Silicon Nitride at Low Temperature. Key Engineering Materials. 2005,280-283: 1249-1252. (SCI: BHO67)
Junting LUO, Kaifeng ZHANG, Guofeng WANG, Wenbo Han. Superplastic and Sinter-forging of Fine-grained Si3N4-Si2N2O Composite. Materials Science Forum. 2005, 475-479:2987-2990. (SCI: BGH40)
Zhang Kaifeng, Han Wenbo, Wang Guofeng, Chen Guoqing The extrusion and closed die forging process of nano-structured Al2O3-ZrO2 composite, Advanced Technology of Plasticity 2005, p211. (SCI:374KD)
Zhang, K.F.; Wang, G.; Wang, G.F.; Wang, C.W.; Wu, D.Z. The superplastic forming technology of Ti-6Al-4V titanium alloy bellows. Mater Sci Forum, 2005,447-448:247-252. (SCI: BGH40)
Yin, D.L.; Zhang, K.F.; Wang, G.F. Microstructure Evolution and Fracture Behavior in Superplastic Deformation of Hot-Rolled AZ31 Mg Alloy Sheet. Materials Science Forum,2005, 475-479:2923. (SCI: BGH40)
Kaifeng Zhang, Deliang Yin, Guofeng Wang. Cavitation behavior during superplastic deformation of AZ31 magnesium alloy. Journal of Materials Science & Technology 2005, 21(4): 510-514. (SCI: 894FC)
韩文波; 张凯锋; 王国峰; 王波; Inconel718合金扩散连接接头的组织与性能研究. 材料科学与工艺, 2005(13), 308-312.
骆俊廷; 张凯锋; 王国峰; 陈国清; 原位制备细晶Si_3N_4-Si_2N_2O复相陶瓷. 粉末冶金技术, 2005(23), 172-175.
韩文波; 张凯锋; 王国峰; Ti-6Al-4V合金多层板结构的超塑成形/扩散连接工艺研究. 航空材料学报, 2005(25), 29-33.
常宏; 李细锋; 王国峰; 韩文波; 张凯锋; 铝基和钛基复合材料的塑性与超塑性. 塑性工程学报. 2005(11), 57-64.
Guoqing Chen, Kaifeng Zhang, Guofeng WANG，Wenbo Han. The superplastic deep drawing of a fine-grained alumina-zirconia ceramic composite and its cavitation behavior. Ceramics International, 2004(30), 2157-2162. (SCI: 958RC)
Zhang Kaifeng, Chen Guoqing, Wang Guofeng, Luo Junting. Fabrication and superplastic forming of alumina-based nanocomposite. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2004(15), 925.
Luo, Junting; Zhang, Kaifeng; Wang, Guofeng; Chen, Guoqing. Crystallization and phase changing of amorphous silicon nitride nanopowders by liquid phase sintering. Fenmo Yejin Jishu/Powder Metallurgy Technology, 2004, 22(4): 214-217.
Yin, D.L.; Zhang, K.F.; Wang, G.F.; Han, W.B. Superplasticity of fine-grained AZ31 Mg alloy sheets. Transactions of Nonferrous Metals Society of China. 2004. 6(SCI: 887VH)
陈国清; 张凯锋; 王国峰; 韩文波; 放电等离子烧结Al_2O_3-ZrO_2纳米复相陶瓷及其力学性能. 航空材料学报, 2004(24), 1-6.
陈国清; 张凯锋; 王国峰; 张蕾; 纳米Al_2O_3/ZrO_2复合粉体的制备及表征. 材料科学与工艺. 2004(12), 20-24.
张凯锋; 韩文波; 王国峰; 镍基合金超塑成形与扩散连接技术研究进展. 塑性工程学报. 2004(11), 1-6.
韩文波; 张凯锋; 王国峰; GH4141镍基合金的扩散连接工艺. 焊接学报. 2004(25), 97-100.
京公网安备 11010802027423号