近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
S.S. Jiang, K.F. Gan, Y.J. Huang*, P. Xue, Z.L. Ning, J.F. Sun, A.H. W. Ngan. Stochastic deformation and shear transformation zones of the glassy matrix in CuZr-based metallic-glass composites. International Journal of Plasticity. 125(2020) 52-62 ESI高被引论文 https://doi.org/10.1016/j.ijplas.2019.09.005
Hongge Li, Yongjiang Huang*, Wenjie Zhao, Tian Chen, JianfeiSun, Daqing Wei, Qing Du, Yongchun Zou, Yunzhuo Lu*, Ping Zhu, Xing Lu, Alfonso H.W. Ngan. Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment. Additive Manufacturing 50 (2022) 102546. ESI高被引论文 https://doi.org/10.1016/j.addma.2021.102546
Wujing Fu, Yongjiang Huang*, Jianfei Sun, Alfonso HW Ngan*. Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening. International Journal of Plasticity.154 (2022) 103296. ESI高被引论文 https://doi.org/10.1016/j.ijplas.2022.103296
Y.J. Huang, J.C. Khong, T. Connolley, J. Mi. The onset of plasticity of a Zr-based bulk metallic glass. International Journal of Plasticity, 60 (2014) 87-100 http://dx.doi.org/10.1016/j.ijplas.2014.05.003
Yunzhuo Lu*, Shuang Su, Shengbiao Zhang, Yongjiang Huang*, Zuoxiang Qin , Xing Lu, Wen Chen* Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility. Acta Materialia 206 (2021) 116632 https://doi.org/10.1016/j.actamat.2021.116632
Hongge Li, Yongjiang Huang*, Jianfei Sun, Yunzhuo Lu* The relationship between thermo-mechanical history, microstructureand mechanical properties in additively manufactured CoCrFeMnNihigh entropy alloy. Journal of Materials Science & Technology 77 (2021) 187–193 https://doi.org/10.1016/j.jmst.2020.10.052
Peng Xue, Simon Pauly, Weimin Gan, Songshan Jiang, Hongbo Fan, Zhiliang Ning, Yongjiang Huang*, Jianfei Sun*. Enhanced tensile plasticity of a CuZr-based bulk metallic glass composite induced by ion irradiation. Journal of Materials Science and Technology. 35 (2019) 2221-2226. https://doi.org/10.1016/j.jmst.2019.06.003
Hangboce Yin, Jia Yan Law* , Yongjiang Huang* , Hongxian Shen* , Sida Jiang, Shu Guo , Victorino Franco and Jianfei Sun. Enhancing the magnetocaloric response of high-entropy metallic-glass bymicrostructural control. Science China Materials 65 (2022) 1134–1142 https://doi.org/10.1007/s40843-021-1825-1
Lei Zhang, Shuang Su, Wujing Fu, Jianfei Sun, Zhiliang Ning, Alfonso H.W. Ngan*, Yongjiang Huang*. Strain-induced structural evolution of interphase interfaces in CuZr-based metallic-glass composite reinforced by B2 crystalline phase. Composites Part B 258 (2023) 110698 https://doi.org/10.1016/j.compositesb.2023.110698
Yongjiang Huang,J.C. Khong, Thomas Connolley, J. Mi. The onset of plasticity of a Zr-based bulk metallic glass. International Journal of Plasticity, 60 (2014) 87-100
Y.J. Huang,J. Shen, J.F. Sun. Bulk metallic glasses: smaller is softer. Applied Physics Letters 90 (2007) 081919.
Yongjiang Huang, J.C. Khong, Thomas Connolley, J. Mi. Understanding the deformation mechanism of individual phases of a ZrTi-based bulk metallic glass matrix composite using in situ imaging and diffraction methods. Applied Physics Letters. 104 (2014) 031912.
Y.J. Huang,F.L. He, H.B. Fan and J. Shen. Ductile Ti-based metallic glass spheres. Scripta Materialia, 67 (2012):661-664
Y.J. Huang, J.C. Khong, T. Connolley, J. Mi. In situ study of the evolution of atomic strain of bulk metallic glass and its effects on shear band formation. Scripta Materialia, 69 (2013) 207-210
Y.J. Huang,W. Zheng, F.L. He, J. Shen. The temperature dependent dynamic mechanical response of a ZrCuNiAl bulk metallic glass. Materials Science and Engineering A, 551 (2012): 100-103
Y.J. Huang,D.J. Wang, D.P. Wang, Z.X. Zhang and J. Shen. Bending behavior of TiZrNiCuBe bulk metallic glass. Journal of Alloys and Compounds, 541(2012): 359-364.
Y.J. Huang,Y.L. Chiu, J. Shen, J.J.J. Chen, J.F. Sun. Indentation Creep of a Ti-based Metallic Glass. Journal of Materials Research. 24 (2009) 993-997.
Y.J. Huang,Y. Wang, H.B. Fan, J. Shen. A TiAl based alloy with excellent mechanical performance prepared by gas atomization and spark plasma sintering. Intermetallics. 31(2012) 202-207
Y.J. Huang,Y.Z. Guo, H.B. Fan, J. Shen. Synthesis of Fe-Cr-Mo-C-B amorphous coating with high corrosion resistance. Materials Letters, 89 (2012) 229-232.
Y.J.Huang, W. Zheng, J. Shen. Influence of the Crystalline Phase on Strain-Rate Sensitivity of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature. Metallurgical and Materials Transactions A, 43A(2012) 5202-5208
Y.J. Huang, J. Shen, J.F. Sun, Z.F. Zhang.Enhanced Strength and Plasticity of a Ti-based Metallic Glass at Cryogenic Temperatures. Materials Science & Engineering A 498 (2008) 203-207.
Y.J.Huang, Y.L. Chiu, J. Shen, Y. Sun,J.J.J. Chen. Mechanical performance of metallic glasses during nanoscratch tests. Intermetallics. 18(2010) 1056-1061.
Y.J. Huang,Y. Sun, J. Shen. Tuning the mechanical performance of a Ti-based bulk metallic glass by pre-deformation. Intermetallics. 18 (2010) 2044-2050
Y.J. Huang,J. Shen, Y.L. Chiu, J.J.J. Chen, J.F. Sun. Indentation creep of an Fe-based bulk metallic glass. Intermetallics. 17 (2009) 190-194
Y.J. Huang, D.J. Wang, H.B. Fan, J.F. Sun, J. Shen, J. Mi. Shear punching of a Ti-based bulk metallic glass. Materials Science & Engineering A 56 (2013) 220-225
Y.J. Huang, J. Shen, J.F. Sun, X.B. Yu. A new Ti–Zr–Hf–Cu–Ni–Si–Sn bulk amorphous alloy with high glass-forming ability. Journal of Alloys and Compounds.427 (2007) 171-175.
Y.J.Huang, J. Shen, Y. Sun, J.F. Sun, J.J.J.Chen. High temperature deformation behaviors of Ti40Zr25Ni3Cu12Be20 bulk metallic glass. Journal of Alloys and Compounds. 504S (2010) S82-85
Y.J. Huang,Y.L. Chiu, J. Shen, J.J.J. Chen, J.F. Sun. Nanoindentation study of a Ti-based metallic glass. Journal of Alloys and Compounds. 479 (2009) 121-128.
Y.J. Huang,J. Shen, J.J.J. Chen, J.F. Sun. Critical cooling rate and thermal stability for a Ti-Zr-Ni-Cu-Be metallic glass. Journal of Alloys and Compounds.477 (2009) 920-924.
Y.J. Huang,Y.L. Chiu, J. Shen, J.J.J. Chen, J.F. Sun. Cooling rate effect of nanomechanical response for a Ti-based bulk metallic glass. Journal of Non-crystalline Solids. 356 (2010) 966-970
Y.J.Huang, J. Shen, Y. Sun, J.F. Sun.Indentation size effect of hardness of metallic glasses. Materials and Design. 31 (2010) 1563-1566.
Y.J. Huang,J. Shen, J.F. Sun. Formation, thermal stability and mechanical properties of Ti42.5Zr7.5Cu40Ni5Sn5 bulk metallic glass. Science in China Series G: Physics, Mechanics & Astronomy. 2008, 51(4): 372-378.
Y.J. Huang, N.I. Tjahyono, J.Shen, Y.L. Chiu. Reverse Plasticity in Nanoindentation. in Fundamentals of Nanoindentation and Nanotribology IV, edited by Eric Le Bourhis, Dylan J. Morris, Michelle L. Oyen, Ruth Schwaiger, Thorsten Staedler, (Materials Research Society Symposium Proceedings Volume 1049, Warrendale, PA, 2007), 1049-AA05-08.
Y.J. Huang, J.F. Sun, X. Yan, J. Shen.Preparation and Thermal Stability of Zr-Al-Ni-Cu-Nb Bulk Amorphous Alloy Matrix Composites.Rare Metal Materials and Engineering 37 (2008) 391-395.
Yongjiang Huang, Wei Zheng, Hongbo Fan, Dongjun Wang, Jun Shen, J. Mi. The effects of annealing on the microstructure and the dynamic mechanical strength of a ZrCuNiAl bulk metallic glass. Intermetallics 42 (2013) 192-197
Yongjiang Huang, Hongbo Fan, Dongjun Wang, Yu Sun, Fangyu Liu, Jianfei Sun, Jun Shen. The effect of cooling rate on the wear performance of a ZrCuAlAg bulk metallic glass. Materials & Design 2014, 58:284-289.
Y. J. Huang, B.J. Zhou, Y.L. Chiu, H.B. Fan,D.J. Wang, J. F. Sun, J. Shen. The structural relaxation effect on the nanomechanical properties of a Ti-based bulk metallic glass. Journal of Alloys and Compounds. 608 (2014) 148-152.
Y. J. Huang, H.B. Fan, Y. Wang, D.J. Wang, J.F. Sun, J. Shen. Effect of ion irradiation in an Al90Fe2Ce8 metallic glass. Materials&Design. 62 (2014) 133-136.
Yong-jiang HUANG, Xiang CHENG, Hong-bo FAN, Shi-song GUAN, Zhi-liang NING, Jian-fei SUN. Crystallization of a Ti-based Bulk Metallic Glass Induced by Electropulsing Treatment. Journal of Iron and Steel Research, International, Volume 23, Issue 1, January 2016, Pages 69-73
Yongjiang Huang, Zhiliang Ning*, Zhe Shen, Weizhong Liang,Haicao Sun, Jianfei Sun. Bending behavior of as-cast and annealed ZrCuNiAl bulk metallic glass Journal of Materials Science & Technology 33 (2017) 1153–1158
Yongjiang Huang*, Peng Xue, Xiang Cheng, Yaming Wang, Fuyang Cao, Zhiliang Ning, Jianfei Sun. Plasticity improvement of a Zr-based bulk metallic glass by micro-arc oxidation. Journal of Iron and Steel Research, International 24 (2017) 416-420
Yongjiang Huang, Xiangcao Jiang, Jun Shen. Creep properties of Ti-Al-Sn-Zr-W-Si high temperature titanium alloy. Materials Science and Technology. 2013,21:117-122 (In Chinese)
Y. Huang, H. Fan, X. Zhou, P. Xue, Z. Ning, D. Daisenberger, J. Sun, J. Shen. Structure and mechanical property modification of a Ti-based metallic glass by ion irradiation. Scripta Materialia 103, 41-44(2015)
X. Cheng, Y.J. Huang*（联系作者）, B.J.Zhou, P. Xue, H.B. Fan, J.F. Sun. Electrochemical and XPS studies of a Nb-containing Ti-based glass-forming alloy system in H 2SO 4 solution. Electrochemistry Communications 60, 139-143(2015)
Y. Lu*, Y. Huang*（联系作者）, X. Lu,Z. Qin, J. Shen. Specific heat capacities of Fe–Co–Cr–Mo–C–B–Y bulk metallic glasses and their correlation with glass-forming ability. Materials Letters 143, 191-193 (2015)
Y.Q. Chen, Y.J. Huang*（联系作者）, H.B. Fan, D.J. Wang, J. Shen. The local structure nature for a Ti-based Bulk metallic glass. Materials Science and Engineering B. 178 (2013)117-121
Yunzhuo Lu*, Yongjiang Huang*（联系作者）, Jun Shen, Xing Lu, Zuoxiang Qin, Zhihua Zhang. Effect of Co addition on the shear viscosity of Fe-based bulk metallic glasses. Journal of Non-Crystalline Solids. Volume 403, 1 November 2014, Pages 62-66.
Yu Sun, Yongjiang Huang*（联系作者）, Hongbo Fan, Fangyu Liu, Jun Shen, Jianfei Sun, John J.J. Chen. Comparison of mechanical behaviors of several bulk metallic glasses for biomedical application. Journal of Non-Crystalline Solids, 406 (2014) 144-150.
Yongjiang Huang, Yang Wu, Hongbo Fan, Shisong Guan, Zhiliang Ning, Jianfei Sun. Crystallization of a Ti-based bulk metallic glass induced by electropulsing treatment. J. Iron Steel Res. Int. 2016,23(1): 69-73
Y. Huang, P. Xue, S. Guo, Y. Wu, X. Cheng, H.B. Fan, Z.L. Ning, F.Y. Cao, D.W. Xing, J. Sun, Peter K. Liaw. Liquid-solid joining of bulk metallic glasses. Scientific Reports 6 (2016)30674
Y. Sun, Y. Huang*（联系作者）, H. Fan,Y. Wang, Z. Ning, F. Liu, D. Feng, X. Jin, J. Shen, J.J.J. Chen. In vitro and in vivo biocompatibility of an Ag-bearing Zr-based bulk metallic glass for potential medical use. Journal of Non-Crystalline Solids 419, 82-91(2015)
Yunzhuo Lu*, Guokun Huang, Zuoxiang Qin, Xing Lu, Yongjiang Huang*（联系作者）. M？ssbauer study of the ultrahigh glass-forming ability in FeCoCrMoCBY alloy system. Vacuum 141 (2017) 173–175
Zhiliang Ning*, Yongjiang Huang*（联系作者）, Zhe Shen, Haicao Sun, Weizhong Liang, Jianfei Sun. The effect of stress concentration on the bending behavior of a ZrCuNiAl bulk metallic glass. Journal of Non-Crystalline Solids 469 (2017) 19–26
G. Wang, H.B. Fan, Y.J. Huang*（联系作者）, J. Shen, Z.H. Chen. A new TiCuHfSi bulk metallic glass with potential for biomedical applications. Materials and Design. 2014, 54,251–255.
Gang Wang, Yong-Jiang Huang, Deodat Makhanlall, Jun Shen. Resistance spot welding of Ti40Zr25Ni3Cu12Be20 bulk metallic glass: experiments and finite element modeling. Rare Metals. 2017, 36 : 123-128
G. Wang, Y. Huang, J. Shen, Z. Chen. Brazing of Ti2AlNb based alloy with amorphous Ti-Cu-Zr-Ni filler. Journal of Wuhan University of Technology-Mater. Sci. Ed. 30 (3), 617-621(2015)
G. Wang, Y.J. Huang,J. Shen, Z.J. Huang, Laser Welding behaviour of TiZrNiCuBe Bulk Metallic Glass and Numerical Simulation of temperature fields, Rare Metal Materials and Engineering, 43, 2713-2718 (2014).
J.F. Sun, Y.J.Huang, J. Shen, G. Wang, D.G.Mccartney. Superplastic formability of a Zr–Ti–Ni–Cu–Be bulk metallic glass. Journal of Alloys and Compounds.415 (2006) 198-203.
J. Shen, Y.J. Huang, J.F. Sun.Plasticity of a TiCu-based bulk metallic glass: Effect of cooling rate. Journal of Materials Research. 22 (2007)3067.
D.J. Wang, Y.J. Huang, J. Zou,G.J. Auchterlonie, K.S. Jack, J. Shen. Metastable nanocrystallization behavior of Ti-based metallic glassy powders during post-heating. Scripta Materialia, 63 (2010)764-767
D.J. Wang, Y.J. Huang, J. Shen. Thermodynamic characteristics of Ti-based glass-forming alloys. Journal of Non-crystalline Solids. 355 (2009) 986-990
D.J. Wang, Y.J.Huang, J. Shen, Y.Q. Wu, H. Huang, J. Zou. Temperature influence on sintering with concurrent crystallization behavior in Ti-based metallic glassy powders. Materials Science and Engineering: A, 527 (2010) 2662-2668.
D.J.Wang, Y.J. Huang, J. Shen,Y.Q. Wu, H. Huang, J. Zou. Effect of cooling rate on microstructure and deformation behavior of Ti-based metallic glassy/crystalline powders. Materials Science and Engineering: A, 527 (2010) 5750-5754
D.J.Wang, Y.J. Huang, L.Z. Wu and J. Shen. Mechanical, acoustic and electrical properties of porous Ti-based metallic glassy/nanocrystalline composites. Materials and Design, 44(2013) 69-73
J.F. Sun, Y.J. Huang, X. Yan, G. Wang, J. Shen. Synthesis and Mechanical Properties of Zr-Cu-Ni-Ta-Al Bulk Amorphous Alloy Matrix Composites. Rare Metal Materials and Engineering 36 (2007) 1153-1156(In Chinese).
D.W. Xing，Y.J.Huang，J. Shen，L. Yang，J.F. Sun. Crystallization behaviors of ZrCuNiAlTi bulk amorphous alloy during continuous heating. Rare Metal Materials and Engineering 36 (2007) 1181-1184 (In Chinese).
W. Zheng, Y.J. Huang, G.Y. Wang, P.K. Liaw, and J. Shen. Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature. Metallurgical and Materials Transactions A, 42A (2011) 1491-1498
W. Zheng, Y.J. Huang, B.J. Pang, J. Shen. Hypervelocity impact on Zr51Ti5Ni10Cu25Al9 bulk metallic glass. Materials Science and Engineering: A, 529 (2011) 352-360
W. Zheng, Y.J. Huang, J. Shen Influence of strain-rate on compressive-deformation behavior of a Zr–Cu–Ni–Al bulk metallic glass at cryogenic temperature. Materials Science and Engineering A 528 (2011) 6855-6859
Y.Z. Lu, Y.J. Huang, J. Shen. The electronic structure origin for ultrahigh glass-forming ability of the FeCoCrMoCBY alloy system. Journal of Applied Physics 110 (2011) 033720
G. Wang, Y.J. Huang, J. Shen. Novel TiCuNiCo composites with high fracture strength and plasticity. Materials and Design 33 (2012) 226-230
G. Wang, Y.J. Huang, M. Shagiev, J. Shen.Laser welding of Ti40Zr25Ni3Cu12Be20 bulk metallic glass. Materials Science and Engineering A. 541 (2012): 33-37.
G. Wang, Y.J. Huang, D. Makhanlall, J.Shen. Friction joining of Ti40Zr25Ni3Cu12Be20 bulk metallic glass. Journal of Materials Processing Technology. 212 (2012): 1850-1855.
X.S. Wei, Y.J. Huang, B. Vekshin, V. Kraposhin, J. Shen. Bulk amorphous Al85Ni10Ce5 composite fabricated by cold hydro- mechanical pressing of partially amorphous powders. Chinese Science Bulletin. 56(36) (2011) 3965-3971
C. Wu, Y.J. Huang, J. Shen. Microscopic structural evolution during elastic deformation of Fe65Mo14C15B6 amorphous alloy studied by ab initio molecular dynamics simulations. Computational Materials Science. 56 (2012)6-10
Y.Z. Lu, Y.J. Huang, X.S. Wei, J. Shen.Close correlation between transport properties and glass-forming ability of an FeCoCrMoCBY alloy system. Intermetallics. 30 (2012) 144-147
Y.Z. Lu, Y. J. Huang, G. Wang and J. Shen. Insights into the ultrahigh glass-forming ability of the Fe-Co-Cr-Mo-C-B-Y alloy system from the electronic-structure perspective. EPL (Europhysics Letters), 99(2012): 37004.
Y.Z. Lu, Y.J.Huang, W. Zheng, J. Shen. Free volume and viscosity of Fe-Co-Cr-Mo-C-B-Y bulk metallic glasses and their correlation with glass-forming ability. Journal of Non-Crystalline Solids, 358(2012): 1274-1277
C. Wu, Y.J. Huang,J. Shen. Structure and dynamics of Zr53Cu18.7Ni12Al16.3 supercooled liquid studied by computer simulation. SCIENTIA SINICA: Physica, Mechanica & Astronomica 42 (2012) 565-570 (In Chinese)
C. Wu, Y.J. Huang, J. Shen. Correlation between the Local Atomic Structure of Melts and Glass Forming Ability in Zr-Cu-Ni-Al Alloys. Chinese Physics Letters 30(10) (2013) 106102.
D.J. Wang, Y.J. Huang, L.Z. Wu, J. Shen. Mechanical behaviors of diamond reinforced Ti-based bulk metallic glassy composites prepared by spark plasma sintering. Materials Science and Engineering: A, 560 (2013) 841-846
D. J. Wang, Y. J. Huang, J. Shen, J. Zou.Differences in crystallisation behaviours during cooling and post-heating processes of Ti based metallic powders. Powder Metallurgy, 56 (2013) 32-37
孙宇Y. Sun+,黄永江 Y.J. Huang, 范洪波 H.B. Fan+,于天亮T.L.Yu+, 刘鑫X.Liu+. Biocompalibility evaluation of Zr-Cu-AL-Ag alloy for prosthodontic齿科修复用Zr-Cu-AL-Ag合金的生物安全性评价. Journal of Clinical Stomatology临床口腔医学杂志, 30(4),202-204 (2014) (In Chinese).
Y.J. Sun, D.D. Qu, Y.J.Huang, X.S. Wei, K.-D.Liss, J. Shen. New Zr-Cu-Ni-Al bulk metallic glasses with superhigh glass-forming ability. Acta Materialia. 57 (2009) 1290-1299.
Y.J. Sun, X.S. Wei, Y.J. Huang, J. Shen. Effect of Gd Addition on The Glass Forming Ability and Mechanical Properties in A Zr-based Bulk Amorphous Alloy. Acta Metallurgica Sinica.45(2) (2009) 243 (in Chinese)
Y.J. Sun, D.W. Xing, Y.J.Huang, J. Shen. A New Type of Zr-Al-Ni-Cu Bulk Metallic Glass with High Plasticity at Room Temperature. Rare Metal Materials and Engineering 38(1) (2009)54-57 (in Chinese)
D. Makhanlall, G. Wang, Y.J. Huang,D.F. Liu, J. Shen. Joining of Ti-based Bulk Metallic Glasses using Resistance Spot Welding Technology, Journal of Materials Processing Technology. 212 (2012) 1790-1795
L. Mei, J.B. Liu, Y.J.Huang, J. Lin, J. Shen, J.B. Tan, P. Jin. Experimental study on formability of bulk metallic glass as mold for microstructure replication. Microelectronic Engineering 98 (2012) 142-146
H. Zhang, Y. Lu, Y. Huang, A. Feng, Z. Qin, X. Lu. Joining of Zr51Ti5Ni10Cu25Al9 BMG to aluminum alloy by friction stir welding. Vacuum 120, 47-49(2015)
F. Chen, Y.X. Tong, Y.J.Huang, B. Tian, L. Li, Y.F. Zheng. Suppression of γ phase in Ni38Co12Mn41Sn9 alloy by melt spinning and its effect on martensitic transformation and magnetic properties. Intermetallics, 36 (2013) 81-85
J.Shen, J.F. Sun, G. Wang, Y.J. Huang, B.D. Zhou. Superplastic flow behavior of bulk metallic glasses in supercooled liquid region. Materials Review. 18(7) (2004) 22-25(In Chinese).
G. Wang, J. Shen, J.F.Sun, Y.J. Huang, J. Zou, Z.P. Lu, Z.H. Stachurski, B.D. Zhou. Superplasticity and superplastic forming ability of a Zr-Ti-Ni-Cu-Be bulk metallic glass in the supercooled liquid region. Journal of Non-crystalline Solids. 351 (2005) 209-217.
Y.J. Sun, D.D. Qu, J. Shen, Y.J. Huang, X.S. Wei. Mechanical Property of a New Zr-Based Bulk Metallic Glass with Certain Plasticity at Low Temperature. International Journal of Modern Physics B.2009, 23: 1331-1336.
S.A.Atroshenko, N.F. Morozov, W. Zheng, Y.J.Huang, Y.V. Sudenkov, N.S. Naumova, J. Shen. Deformation behaviors of a TiZrNiCuBe bulk metallic glass under shock loading. Journal of Alloys and Compounds,505 (2010) 501-504
X.S. Wei, B. Vekshin, V.Kraposhin, Y.J. Huang, J.Shen, K. Xia. Full density consolidation of pure aluminium powders by cold hydro-mechanical pressing. Materials Science and Engineering A 528 (2011) 5784-5789
Y.L. An, Z.H. Li, H.P. Xiang, Y.J. Huang, J. Shen. First-principle calculations for electronic structure and bonding properties in layered Na2Ti3O7. Central European Journal of Physics. 9(6) (2011) 1488-1492
D.J. Wang, Z.H. Li, Y.L. An, Y.J. Huang, L.Z. Wu, J. Shen.Photocatalytic H2 evolution property of Zr-doped sodium titanate nanobelts prepared by dealloying of Ti-based metallic glassy powders. International Journal of Hydrogen Energy. 37(2012): 8240-8248
S.F. Guo, K.C. Chan, S.H. Xie, P. Yu, Y.J. Huang,H.J. Zhang. Novel centimeter-sized Fe-based bulk metallic glass with high corrosion resistance in simulated acid rain and seawater. Journal of Non-Crystalline Solids, 369 (2013) 29-33
Q.J. Chen, J. Shen, H.B.Fan, J.F. Sun, Y.J. Huang, D.G. Mccartney. Glass-forming ability of an Iron-based alloy enhanced by Co addition and evaluated by a new criterion. Chinese Physics Letters 22 (2005) 1736-1738.
Z.H. Li, J. Shen, J.Q.Wang, D.J. Wang, Y.J. Huang,J. Zou. Single crystal titanate–zirconate nanoleaf: Synthesis, growth mechanism and enhanced photocatalytic hydrogen evolution properties. CrystEngComm, 14 (2012) 1874～1880
Peng Lin, Zhubin He, Shijian Yuan, Jun Shen, Yongjiang Huang, Xiaobo Liang. Instability of the O-phase in Ti–22Al–25Nb alloy during elevated-temperature deformation. Journal of Alloys and Compounds 578 (2013) 96–102
Z. Y. Liu, G. Wang, K.C. Chan, J. L. Ren, Y. J. Huang,X.L. Bian,X. H. Xu,D. S. Zhang,Y. L. Gao,and Q. J. Zhai. Temperature dependent dynamics transition of intermittent plastic flow in a metallic glass. I. Experimental investigations. Journal of Applied Physics 114, 033520 (2013)
Z. Y. Liu, G. Wang, K.C. Chan, J. L. Ren, Y. J. Huang, X. L. Bian,X. H. Xu,D. S. Zhang,Y. L. Gao,and Q. J. Zhai. Temperature dependent dynamics transition of intermittent plastic flow in a metallic glass. II. Dynamics analysis. Journal of Applied Physics 114, 033521 (2013)
K. X. Liu, W. D. Liu, J. T. Wang, H. H. Yan, X. J. Li, Y.J. Huang, X. S. Wei, and J. Shen. Atomic-scale bonding of bulk metallic glass to crystalline aluminum. Applied Physics Letters. 93 (2008)081918.
D.W. Xing, J. Shen, L.Y. Zhang, J.F. Sun, X.D. Wang, Y.J.Huang, P.K. Liaw. Evolution of the primary crystals and the amorphous matrix following annealing of a bulk Zr56.6Cu17.3Ni12.5Al9.6Ti4 metallic glass. Materials Science and Engineering A, 513-514 (2009) 8-12.
D.W. Xing, J. Shen, L.Y. Zhang, J.F. Sun, X.D. Wang, H.Wang, Y.J. Huang, P.K. Liaw. Investigation of Precipitation Phases in As-cast Wedge Ingot of Bulk Amorphous Zr56.6Cu17.3Ni12.5Al9.6Ti4 Alloy. Journal of Alloys and Compounds, 481 (2009) 531-538
Z.L. Ning, X.Y. Zhao, A.A. Luo, H.H. Liu, W.Z. Liang, Y.J.Huang,F.Y. Cao, J.F. Sun, The melt protection mechanism of an SO2/CO2 gas mixture for a magnesium-rare-earth based alloy. Journal of Alloys and Compounds 2017, 722: 101-107
Xinyi Zhao, Zhiliang Ning, Zhongquan Li, Xinyi Zhao, Wenbing Zou, Baohui Li, Yongjiang Huang, Fuyang Cao, Jianfei Sun, Evolved gas analysis of PEP-SET sand by TG and FTIR. Journal of Analytical and Applied Pyrolysis 2017, 127: 490-495
Xin-Yi Zhao, Zhi-Liang Ning, Fu-Yang Cao, Shan-Guang Liu, Yong-Jiang Huang, Jing-Shun Liu, Jian-Fei Sun. Effect of Double Oxide Film Defects on Mechanical Properties of As-Cast C95800 Alloy. Acta Metallurgica Sinica-English Letters 2017, 30: 541-549
Hong-Hui Liu, Zhi-Liang Ning,Jun-Ying Yi, Ma Qian, Hai-Chao Sun, Yong-Jiang Huang, Jian-Fei Sun, Effect of Dyaddition on microstructure and mechanical properties of Mg-4Y-3Nd-0.4Zr alloy.Transactions of Nonferrous Metals Society of China 2017, 27: 797-803
Deng, S. S.; Wang, D. J.; Luo, Q.; Luo, Q ; Huang, YJ; Shen, J. Spark plasma sintering of gas atomized AlNiYLaCo amorphous powders Advanced Powder Technology 2015, 26: 1696-1701
Y.Z. Lu*, Z.H. Zhang, X. Lu, Z.X. Qin, J. Shen, Y.J. Huang*, P.K. Liaw. Cooling-rate induced softening in a colloidal glass. Scientific Reports. 7,16228 (2017)
京公网安备 11010802027423号