近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
He YZ, Zhao ZL, Cai K, Kirby J, Xiong YL, Xie YM*. A thinning algorithm based approach to controlling structural complexity in topology optimization. Finite Elements in Analysis & Design, 2022, Accepted.
Fang HY, Zhao P, Zhang C*, Pan W, Yu Z, Cai K, Wang CX, Wang J, Du MR, He W, Zhao R, Deng N. A cleaner polyurethane elastomer grouting material with high hardening strain for the fundamental rehabilitation: The comprehensive mechanical properties study. Construction and Building Materials, 2022, 318:125951.
Wei N, Chen Y, Cai K, Zhang Y, Pei Q, Xheng J.-C, Mai YW, Zhao J. Unusual thermal properties of graphene origami crease: A molecular dynamics study. Green Energy & Environment, 2022, 7:86–94.
Cai K*, Li X, Shi J, Qin QH*. Nanospring from partly hydrogenated graphene ribbon: A molecular dynamics study. Applied Surface Science, 2021, 541:148507.
Shi J, Yang LK, Shen JH, Cai K*. Nonlinear vibration of a buckled/damaged BNC nanobeam transversally impacted by a high-speed C60. Scientific Reports, 2021, 11:635.
Chen A, Cai K*, Zhao ZL, Xia Q, Zhou Y, Xie YM*. Controlling the maximum first principal stress in topology optimization. Structural and Multidisciplinary Optimization, 2021, 63:327–339.
Song B, Cai K*, Shi J, Qin QH. Rotation-induced axial oscillation of a composite nanoconvertor at low temperature. Journal of Vibration and Control, 2021, 27:1113–1122.
Shi J*, Wu PW, Li X, Cai K*, Zhang YY*. Efficiency of CNT-based rotation transmission nanosystem in water. Nanotechnology, 2021, 32: 245401.
Wei N, Li Z, Li Z-H, Zhang C, Wang C, Zhao J*, Cai K*. A heat and force locating sensor with nanoscale precision: a knitted graphene sheet. Nanoscale, 2021, 13:5826–5833.
Cai K*, Sun S, Shi J, Qin QH*. A CNT nanomotor driven by graphene origami. Physical Review Applied, 2021, 15:054017.
Cai K, Yang Y, Shi J, Zhong Z*, Qin QH*. Thermal stability of a nanoporous graphene membrane candidate form an orthogonal-diagonal nanotexture: A molecular dynamics test. Applied Surface Science, 2021, 558:149955.
Cai K, Sun S, Shi J*, Zhang YY*, Zhang C. Position effects of the graphene-origami actuators on the rotation of a CNT nanomotor. Phys. Chem. Chem. Phys., 2021, 23:18893–18898.
Cai K, Lin X, Zhong Z*, Shi J, Qin QH*. A method for designing tunable chiral mechanical carbon networks for energy storage. Phys. Chem. Chem. Phys., 2021, 23:26209.
Shi J, Hu CW, Shen JH, Cai K*, Wang JB. Mechanical properties of bonded few-layered graphene via uniaxial test: A molecular dynamics simulation study. Computational Materials Science, 2020, 172:109295.
Yang Y, Cai K*, Shi J, Qin QH. Shrinkage-expansion of a tri-isometric knitting from graphene ribbons at finite temperature. Materials & Design, 2020, 185:108269.
Zhao ZL, Zhou SW, Cai K, Xie YM. A direct approach to controlling the topology in structural optimization. Computers and Structures, 2020, 227:106141.
Shi J, Cao Z, Wang JB, Shen J, Cai K*. Stable rotation transmission of a CNT-based nanogear drive system with intersecting axes at low temperature. Surface Science, 2020, 693:121548.
Wang L, Li D, Shi J, Cai K*. Strength analysis of a defective diamondene nanoribbon under uni-axial tension. Computational Materials Science, 2020, 173:109459.
Shi J*, Wang AQ, Song B, Cai K*. A GHz rotary nanoflake driven by diamond needles: A molecular dynamics study. Materials & Design, 2020, 191:108593.
He YZ, Cai K, Zhao ZL, Xie YM*. Stochastic approaches to generating diverse and competitive structural designs in topology optimization. Finite Elements in Analysis & Design, 2020, 173:103399.
Song B, Shi J, Wang JB, Shen JH, Cai K*. Ideal oscillation of a hydrogenated deformable rotor in a gigahertz rotation-translation nanoconvertor at low temperature. Sensors, 2020, 20(7):1969.
Zhou X, Cai HF, Hu CW, Shi J, Li ZL*, Cai K*. Analogous diamondene nanotube structure prediction based on molecular dynamics and first-principles calculations. Nanomaterials, 2020, 10:846.
Wang L, Cai K*, Shi J, Qin QH*. Self-assembly of Nano-scroll/Nano-helix from a Diamondene Nanoribbon with One Passivated Surface. Applied Surface Science, 2020, 527:146848.
Wang L, Cai K*, Xie YM, Qin QH. Thermal shrinkage and stability of diamondene nanotubes. Nanotechnology, 2019, 30:075702.
Song B, Cai K*, Shi J, Xie YM, Qin QH. Coupling effect of van der Waals, centrifugal, and frictional forces on a GHz rotation-translation nano-convertor. Physical Chemistry Chemical Physics, 2019, 21:359–368.
Yang Y, Cai K*, Shi J, Xie YM. Nanotextures from orthogonal graphene ribbons: Thermal stability evaluation. Carbon, 2019, 144:81–90.
Li S, Ren H, Xie X, Cai K, Li C, Wei N. Thermal conductivity of two types of 2D carbon allotropes: A molecular dynamics study. Nanoscale Research Letters, 2019, 14:7.
Yang LK, Cai K*, Shi J, Xie YM, Qin QH*. Nonlinear dynamic behavior of a clamped-clamped beam from BNC nanotube impacted by fullerene. Nonlinear Dynamics, 2019, 96:1133–1145.
Wu PW, Shi J, Wang JB, Shen JH, Cai K*. Critical output torque of a GHz CNT-based rotation transmission system via axial interface friction at low temperature. International Journal of Molecular Sciences. 2019, 20:3851.
Song B, Shi J, Hu CW, Wang J, Cai K*, Chao Zhang*. Recoverability of a gigahertz rotation-translation nanoconvertor with hydrogenated deformable rotor at room temperature. Nanotechnology, 2019, 30:465301.
Kang Y*, Zhou D, Wu Q, Duan F, Yao R, Cai* K. Fully atomistic molecular dynamics computation of physico-mechanical properties of PB, PS and SBS. Nanomaterials, 2019, 9(8):1088.
Wang L, Zhang RR, Shi J, Cai K*. Vibration behavior of diamondene nano-ribbon passivated by hydrogen. Scientific Reports, 2019, 9:15783.
Zhang XN, Cai K*, Shi J, Qin QH. Friction effect of stator in a multi-walled CNT-based rotation transmission system. Nanotechnology, 2018, 29:045706.
Cai K*, Yang LY, Shi J, Qin QH*. Critical conditions for escape of a high-speed fullerene from a BNC nanobeam after collision. Scientific Reports, 2018, 8:913.
Cai K, Shi J, Xie YM, Qin QH*. A nano continuously variable transmission system from nanotubes. Nanotechnology, 2018, 29:075707.
Xue Y, Chen Y, Cai K, Liu Z, Zhang Y, Wei N*. Local strain field engineering on interfacial thermal resistance of graphene nanoribbon. Applied Physics Letters, 2018, 112:021604.
Zhao Z, Yin H, Cai K, Zhou W. Mechanical stability of a nanotube from monolayer black phosphorus with the [110] direction as tube’s circumference or generatrix. Physical Chemistry Chemical Physics, 2018, 20(5):3465–3473.
Wei N, Chen Y, Zhang Y, Zhou C, Hao X, Xu K, Cai K*, Chen J*. Efficient selection methods for black phosphorene nanoribbons. Nanoscale, 2018, 10:4385–4390.
Cai K, Shi J, Yu JZ, Qin QH*. Dynamic behavior of a rotary nanomotor in argon environments. Scientific Reports, 2018, 8:3511.
Cai K*, Wang L*, Xie YM. Buckling behavior of nanotubes from diamondene. Materials & Design, 2018, 149: 34–42.
Wang L*, Cai K*. Absorption and temperature effects on the tensile strength of a black phosphorus ribbon in argon environment. Computational Materials Science, 2018, 150:15–23.
Shi J, Cai K*, Xie YM. Thermal and tensile properties of diamondene at finite temperature: A molecular dynamics study. Materials & Design, 2018, 156: 125–134.
Wang L*, Cai K*, Xie YM. Softening-to-hardening of stretched diamondene nanotubes. Physical Chemistry Chemical Physics, 2018, 20:21136–21143.
Shi J, Li Y, Wang AQ, Cai K*. Rotational behavior of a nanoring protected by argon. Computational Materials Science, 2018, 154:132–137.
Xu K, Zhang J, Hao X, Wei N*, Cao X, Kang Y*, Cai K*. Interfacial thermal conductance of buckling carbon nanotubes. AIP Advances, 2018, 8(6):065116.
Duan HY, Shi J*, Cai K, Qin QH*. Thermal vibration-induced rotation of a carbon nanotube-based nano-wheel: A molecular dynamics study. International Journal of Molecular Sciences. 2018, 19:3513.
Cao J, Wang Y, Shi J*, Chai J, Cai K*. Initially relative position influencing self-assembly of a black phosphorus ribbon on a CNT. International Journal of Molecular Sciences. 2018, 19:4085.
Shi J, Cai HF, Cai K*, Qin QH*. Dynamic behavior of a black phosphorus and carbon nanotube composite system. Journal of Physics D: Applied Physics, 2017, 50:025304.
Cai K, Zhang XN, Shi J, Qin QH. Rotation-excited perfect oscillation of a tri-walled nanotube-based oscillator at ultralow temperature. Nanotechnology, 2017, 28:155701.
Cai K, Liu LN, Shi J, Qin QH. Winding a nanotube from black phosphorus nanoribbon onto a CNT at low temperature: A molecular dynamics study. Materials & Design, 2017, 121:406–413.
Cai K, Yu JZ, Shi J, Qin QH. Robust rotation of rotor in a thermally driven nanomotor. Scientific Reports, 2017, 7:46159.
Chen Y, Zhang Y, Cai K, Jiang JW, Zheng JC, Zhao J, Wei N*. Interfacial thermal conductance in graphene/black phosphorus heterogeneous structures. Carbon, 2017, 117: 399–410.
Yang LK, Cai K*, Shi J, Qin QH*. Significance tests on the output power of a thermally driven rotary nanomotor. Nanotechnology, 2017, 28:215705.
Cai K, Wan J, Yang LK, Wei N*, Shi J, Qin QH*. Buckling behaviour of composites with double walled nanotubes from carbon and phosphorous. Physical Chemistry Chemical Physics, 2017, 19: 10922–10930.
Cai K, Liu LN, Shi J, Qin QH. Self-assembly of a jammed black phosphorus nanoribbon on a fixed carbon nanotube. The Journal of Physical Chemistry C, 2017, 121:10174–10181.
Shi J, Liu LN, Cai K*, Qin QH*. Conditions for escape of a rotor in a rotary nanobearing from short triple-wall nanotubes. Scientific Reports, 2017, 7:6772.
Cai K, Yu JZ, Shi J, Qin QH. Spectrum of temperature-dependent rotational frequency of the rotor in a thermally driven rotary nanomotor. The Journal of Physical Chemistry C, 2017, 121:16985–16995.
Cai K, Liu LN, Shi J, Qin QH. Fabrication of an ideal nanoring from a black phosphorus nanoribbon upon movable bundling carbon nanotubes. Nanotechnology, 2017, 28:385603.
Cai K, Shi J, Liu LN, Qin QH. Self-assembly of a nanotube from a black phosphorus nanoribbon on a string of fullerenes at low temperature. Physical Chemistry Chemical Physics, 2017, 19:24009.
Shi J, Cai K*, Liu LN, Qin QH*. Self-assembly of a parallelogram black phosphorus ribbon into a nanotube. Scientific Reports, 2017, 7:12951.
Cao J, Cai K*. Thermal expansion producing easier formation of a black phosphorus nanotube from nanoribbon on carbon nanotube. Nanotechnology, 2017, 29:055603.
Wang L, Cai K*. Brittle-to-ductile transition in fracture of few-layered black phosphorus ribbons under uniaxial stretching. Computational Materials Science, 2017, 144:210–215.
Cai K, H. Yin, X.N. Zhang, Shi J*. A nano converter from carbon nanotubes with multiple output signals. Computational Materials Science, 2016, 111:263–268.
Cai K, Cao J, Shi J, Liu LN, Qin QH. Optimal layout of multiple bi-modulus materials. Structural and Multidisciplinary Optimization, 2016, 53:801–803.
Cai K, Wan J, Qin QH, Shi J. Quantitative control of a rotary carbon nanotube motor under temperature stimulus. Nanotechnology, 2016, 27(5): 055706.
Gao ZL, Cai HF, Wan J, Cai K*. Energy absorption induced oscillation of a rotating curved carbon nanotube in a nano bearing. Computational Materials Science, 2016, 115:72–76.
Yin H, Cai K*, Wan J, Gao ZL*, Chen Z. Dynamic response of a carbon nanotube-based rotary nano device with different carbon-hydrogen bonding layout. Applied Surface Science, 2016, 365:352–356.
Cao J, Cai K*, Wang Q, Shi J*. Damage behavior of a bonded sandwich beam with corrugated core under 3-point bending. Materials & Design, 2016, 95: 165–172.
Cai K*, Yu JZ, Wan J, Yin H, Shi J, Qin QH. Configuration jumps of rotor in a nanomotor from carbon nanostructures. Carbon, 2016, 101: 168–176.
Cai K, Cai HF, Ren L, Shi J, Qin QH. Over-speeding rotational transmission of a carbon nanotube-based bearing. The Journal of Physical Chemistry-C, 2016, 120:5797–5803.
Cai K, Cao J, Shi J, Qin QH. Layout optimization of ill-loaded multiphase bi-modulus materials. International Journal of Applied Mechanics, 2016, 8(3):1650038.
Wei N, Chen Y, Cai K, Wang HQ, Zhao JH, Zheng J-C. Thermal conductivity of graphene kirigami: ultralow and strain robustness. Carbon, 2016, 104:203–213.
Shi J, Cao J, Cai K, Wang ZZ*, Qin QH*. Layout optimization for multi-bi-modulus materials system under multiple load cases. Engineering with Computers, 2016, 32:745–753.
Cai K, Wan J, Yu JZ, Cai HF, Qin QH. Molecular dynamics study on welding a defected graphene by a moving fullerene. Applied Surface Science, 2016, 377:213–220.
Cai K, Wan J, Wei N, Cai HF, Qin QH. Thermal stability of a free nanotube from single-layer black phosphorus. Nanotechnology, 2016, 27(23): 235703.
Cai K, Wan J, Wei N, Qin QH. Strength and stability analysis of a single-walled black phosphorus tube under axial compression. Nanotechnology, 2016, 27(27):275701.
Cai K, Yu JZ, Shi J, Qin QH. A method for measuring rotation of a thermal carbon nanomotor using centrifugal effect. Scientific Reports, 2016, 6: 27338.
Cai K, Yu JZ, Liu LN, Shi J, Qin QH. Rotation measurements of a thermally driven rotary nanomotor with a spring wing. Physical Chemistry Chemical Physics, 2016,18:22478–22486.
Shi J, Yin H, Yu JZ, Liu LN, Cai K*. Configuration transition between graphene and nanoscroll using kinetic energy injecting method. Computational Materials Science, 2016, 125:146–153.
Shi J, Cai K*, Qin QH. A nanoengine governor based on the end interfacial effect. Nanotechnology, 2016, 27:495704.
Cai K, Luo J, Ling YR, Wan J, Qin QH. Effects of size and surface on the auxetic behaviour of monolayer graphene kirigami. Scientific Reports, 2016, 6:35157.
Cai K, Yin H, Wei N, Chen Z, Shi J. A stable high-speed rotational transmission system based on nanotubes. Applied Physics Letters, 2015, 106(2):021909.
Cai K, Yu JZ, Yin H, Qin QH. Sudden stoppage of rotor in a thermally driven rotary motor made from double-walled carbon nanotubes. Nanotechnology, 2015, 26:095702.
Cai K, Cai HF, Yin H, Qin QH. Dynamic behavior of curved double-wall carbon nanotubes with rotating inner tube. RSC Advances, 2015, 5:29908–29913.
Yin H, Cai K*, Wei N, Qin QH, Shi J. Study on the dynamics responses of a transmission system made from carbon nanotubes. Journal of Applied Physics, 2015, 117:234305.
Cai K, Cai HF, Shi J, Qin QH. A nano universal joint made from curved double-walled carbon nanotubes. Applied Physics Letters, 2015, 106:241907.
Cai K, Zhang XN, Shi J, Qin QH. Temperature effects on a motion transmission device made from carbon nanotubes: a molecular dynamics study. RSC Advances, 2015, 5:66438–66450.
Cai K, Gao ZL*, Shi J. Topology Optimization of Continuum Structures with Bi-modulus Materials. Engineering Optimization, 2014, 46(2): 244–260.
Cai K, Gao DY, Qin QH. Post-buckling solutions of hyper-elastic beam by canonical dual finite element method. Mathematics and Mechanics of Solids, 2014, 19(6):659–671.
Cai K, Yin H, Qin QH, Li Y. Self-excited oscillation of rotating double-walled carbon nanotubes. Nano Letters, 2014, 14(4):2558–2562.
Cai K, Gao DY, Qin QH. Postbuckling analysis of a nonlinear beam with axial functionally graded material. Journal of Engineering Mathematics, 2014, 88:121–136.
Cai K, Luo Z, Qin QH. Topology optimization of bi-modulus structures using the concept of bone remodeling. Engineering Computation, 2014, 31(7):1361–1378.
Cai K, Li Y, Yin H, Qin QH. Gradientless temperature-driven rotating motor from a double-walled carbon nanotube. Nanotechnology, 2014, 25(50):505701.
Cai K, Shi J, Zhang AJ. Stiffness design of a continuum under ill-loaded cases by fractional-norm objective formulation. Optimization and Engineering, 2014, 15(4):927-944. (IF=1.233)
Cai K, Gao ZL*, Shi J. Compliance optimization of a continuum with bimodulus material under multiple load cases. Computer-Aided Design, 2013, 45:195-203.
Cai K, Qin QH, Luo Z, Zhang AJ. Robust topology optimisation of bi-modulus structures. Computer-Aided Design, 2013, 45(10):1159-1169.
Cai K. A simple approach to find optimal topology of a continuum with tension-only or compression-only material. Structural and Multidisciplinary Optimization, 2011, 43(6):827-835.
Cai K, Shi J. A bionics approach for topology optimization for tension-only or compression-only design. Journal of Bionic Engineering. 2010, 7(4):397–404.
Cai K, Chen BS, Zhang HW, Shi J. Stiffness design of continuum structures by a bionics topology optimization method. Journal of Applied Mechanics. 2008, 75(5):051006, 1-11. (IF=1.065)
Zhang HW, Cai K*, Wang L. Deformation of single-walled carbon nanotubes under large axial strains. Materials Letters, 2008, 62:3940–3943.
京公网安备 11010802027423号