近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
期刊论文
Bai, Y., Lee, Y.J., Guo, Y., et al., Efficient post-processing of additive manufactured maraging steel enhanced by the mechanochemical effect, International Journal of Machine Tools and Manufacture, 2023, 193, 104086. https://doi.org/10.1016/j.ijmachtools.2023.104086.（2023 IF: 14.0 ）
Bai, Y., Lee, Y.J., Zhao, C., et al., Unique cellular microstructure-enabled hybrid additive and subtractive manufacturing of aluminium alloy mirror with high strength[J], Journal of Materials Processing Technology, 2023, 118095.
Wang, D., Wang, H., Liu Z., Chen Z., Long Y., Zhang Y., Bai, Y*. Influence mechanism of laser delay on internal defect and surface quality in stitching region of 316L stainless steel fabricated by dual-laser selective laser melting. Journal of Manufacturing Processes, 2023, 94, 35-48. (2022 IF: 5.684)
Bai Y, Zhao C, Zhang J, et al. Abnormal thermal expansion behaviour and phase transition of laser powder bed fusion maraging steel with different thermal histories during continuous heating [J]. Additive Manufacturing, 2022, 102712.(2022 IF: 11.632)
Gou J, Wang Z, Hu S, Shen J, Liu Z, Yang C, Bai Y*, Lu WF*. Effect of cold metal transfer mode on the microstructure and machinability of Ti–6Al–4V alloy fabricated by wire and arc additive manufacturing in ultra-precision machining. Journal of Materials Research and Technology. 2022 Nov 1;21:1581-94. (2022 IF: 6.267)
Wang D, Feng Y, Liu L, Wei X, Yang Y, Yuan P, Liu Y, Han C, Bai Y*. Influence Mechanism of Process Parameters on Relative Density, Microstructure and Mechanical Properties of Low Sc-Content Al-Mg-Sc-Zr Alloy Fabricated by Selective Laser Melting. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers. 2022 Jul 13:100034.
白玉超, 陈杰, 刘林青, 韦雄棉, 王迪. 热处理对增材制造 AlSi10Mg 超精密车削特性的影响机理. 机械工程学报. 2023 Jan 5;58(19):315-30.
白玉超, 王迪, 李朝将. 激光定向能量沉积制造 A131 EH36/AISI 1045 双金属结构性能研究. Chinese Journal of Lasers. 2022 Jul 1;49(14):1402304.
Cao Q#, Bai Y#, Zheng Z, Zhang J, Fuh JY, Wang H. Support Removal on Thin-Walled Parts Produced by Laser Powder Bed Fusion. 3D Printing and Additive Manufacturing. 2022 Jun 6.(2022 IF: 5.355)
Zheng, Z.#, Jin, X., Bai, Y.#, Yang, Y., Ni, C., Lu, W.F. and Wang, H., 2022. Microstructure and anisotropic mechanical properties of selective laser melted Ti6Al4V alloy under different scanning strategies. Materials Science and Engineering: A, 831, p.142236. (2022 IF: 6.044)
Zhao, C. #, Bai, Y. #, Zhang, Y., Wang, X., Xue, J.M. and Wang, H., 2021. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel. Materials & Design, 209, p.109999. (2022 IF: 9.417)
Bai, Y., Zhao, C., Wang, D., et al. Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 299 (2022): 117328. (2022 IF: 6.162)
Bai Y, Zhao C, Zhang Y, et al. Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability[J]. Materials Science and Engineering: A, 2021, 30:141528.
Bai Y, Zhao C, Yang J, et al. Microstructure and machinability of selective laser melted high-strength maraging steel with heat treatment[J]. Journal of Materials Processing Technology, 2021, 288:116906.
Bai Y, Zhao C, Zhang Y, et al. Microstructure and mechanical properties of additively manufactured multi-material component with maraging steel on CrMn steel[J]. Materials Science and Engineering: A, 2021, 802:140630.
Zheng, Z., Ni, C., Yang, Y., Bai, Y*. and Jin, X.*, 2021. Numerical Analysis of Serrated Chip Formation Mechanism with Johnson-Cook Parameters in Micro-Cutting of Ti6Al4V. Metals, 11(1), p.102.
Bai Y, Lee YJ, Li C, et al. Densification Behavior and Influence of Building Direction on High Anisotropy in Selective Laser Melting of High-Strength 18Ni-Co-Mo-Ti Maraging Steel[J]. Metallurgical and Materials Transactions A, 2020, 51(11):5861-79.
Bai Y, Zhang J, Zhao C, et al. Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy[J]. Materials Characterization, 2020, 167:110489.
Bai Y, Zhao C, Yang J, et al. Dry mechanical-electrochemical polishing of selective laser melted 316L stainless steel[J]. Materials & Design, 2020, 193: 108840.
Bai Y, Shi Z, Lee YJ, et al. Optical surface generation on additively manufactured AlSiMg0. 75 alloys with ultrasonic vibration-assisted machining[J]. Journal of Materials Processing Technology, 2020, 280:116597.
Bai Y, Chaudhari A, Wang H. Investigation on the microstructure and machinability of ASTM A131 steel manufactured by directed energy deposition[J]. Journal of Materials Processing Technology, 2020, 276:116410.
Bai Y, Wang D, Yang Y, et al. Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting[J]. Materials Science and Engineering: A, 2019, 760:105-17.
Bai Y, Yang Y, Xiao Z, et al. Selective laser melting of maraging steel: mechanical properties development and its application in mold[J]. Rapid Prototyping Journal, 2018 Apr 9.
Bai Y, Yang Y, Xiao Z, et al. Process optimization and mechanical property evolution of AlSiMg0. 75 by selective laser melting [J]. Materials & Design, 2018, 140: 257-266.
Bai YC, Fu F, Xiao ZF, et al. Progress in selective laser melting equipment, related biomedical metallic materials and applications[J]. Journal of Zhejiang University-SCIENCE A, 2018, 19(2):122-36.
白玉超, 杨永强, 王迪, 肖然, and 刘洋. "锡青铜激光选区熔化工艺及其性能." 稀有金属材料与工程 47, no. 3 (2018): 1007-1012.
Bai, Y., Yang, Y., Wang, D. and Zhang, M. Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting[J]. Materials Science and Engineering: A, 2017, 703, pp.116-123.
Wang, D.#, Wu, S., Bai, Y.#, Lin, H., Yang, Y. and Song, C.#. Characteristics of typical geometrical features shaped by selective laser melting[J]. Journal of Laser Applications, 2017, 29(2), p.022007.
著作
王迪，杨永强，刘洋，白玉超，谭超林。《粉末床激光熔融技术》，机械工业出版社，2021.11
Wang, H., Lee, Y.J., Bai, Y., & Zhang, J. (2023). Post-Processing Techniques for Metal-Based Additive Manufacturing: Towards Precision Fabrication (1st ed.). CRC Press. https://doi.org/10.1201/9781003272601
Wang D, Yang Y, Liu Y, Bai Y, Tan C. Laser Powder Bed Fusion of Additive Manufacturing Technology. Springer Nature; 2023 Oct 6. https://doi.org/10.1007/978-981-99-5513-8
会议论文
Y. Bai, Y. Guo, H, Wang. Anisotropy in ultra-precision machinability of additively manufactured Inconel 718 alloys. Proceedings of the 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2022), Singapore, 2022
京公网安备 11010802027423号