姜玉雁 - 北京理工大学 - 机械与车辆学院

个人简介

本科毕业于西安交通大学低温专业，清华大学能动系硕士，东京大学机械系工学博士。2002-2012年，先后在日本东京大学生产技术研究所、丰田中央研究所、Siemens PLM Software公司等地工作，2012-2021年任中科院工程热物理研究所研究员、中国科学院大学博士生导师，2021年加入北京理工大学机械与车辆学院。近年主要研究项目微尺度流动沸腾的不稳定性形成机理与非稳态液膜相变动力学，国家自然科学基金，No.51376179，负责人燃气轮机高温透平叶片研制与验证，中科院重点部署项目,课题负责人燃煤发电系统能源高效清洁利用的基础研究，国家973基础研究计划项目，No.2015CB201503，子课题负责人聚光光伏与余热利用温湿度调节系统研究，国家重点研发计划，国际合作重大项目，No.2016YFE0118100，负责人超临界二氧化碳透平发电关键技术研究，中科院先导A类专项课题，负责人低温烟气余热回收利用技术装备研究开发，山东省泰山产业领军人才项目，负责人 XX热防护技术，国防探索项目、中航和航天科技院所合作项目热流体仿真软件开发项目，兵器工业、中海油等公司成果及荣誉国家海外高层次人才青年项目，2012年山东省泰山产业领军人才，2018年产学研合作成果奖，“热压转换相变传热技术”，中国产学研合作促进会，2019年发明创业成果奖，“超临界二氧化碳发电技术产业化”，中国发明协会，2020年山东省机械工业科学技术奖，低温烟气余热回收利用技术装备，2021年中国科学院大学优秀研究生课程，《高等传热学》，2021年指导的研究生4人次获得中国工程热物理学会传热传质分会“王补宣-过增元青年优秀论文奖” 社会职务中国工程热物理学会热管专业委员会委员中国“热管理产业技术创新战略联盟”副理事长国家自然科学基金、重点研发计划、科技部青年人才等项目的评审专家

研究领域

（1）新工质先进动力循环及其关键技术在国内率先开展了超临界CO2布雷顿循环发电技术实验研究，建成了兆瓦级发电成套示范机组，并完成了离心压缩机、涡轮、毛细管换热器等核心装备的研制。目前从事大型跨临界CO2热泵技术研发。（2）微纳尺度相变传热基础研究与应用在基础研究方面，主要研究微尺度沸腾传热、微液膜的跨尺度热质传递机理，提出了相变传热的智能调控和热压转换强化等新原理和方法，在工程应用方面，致力于以热管为基础的电子器件热管理和航天器高温热防护技术开发。（3）热流体数值计算主要研究两相流与相变传热的数值算法，大型流体CAE软件的开发。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

新工质动力循环曹可, 袁达忠, 胡和敏, 姜玉雁, 高倍聚光光伏光热一体化系统的热电性能研究, 太阳能学报, 42 (12), 65-70, (2021). 朱玉铭 , 姜玉雁, 梁世强, 郭朝红, 郭永献, 高峰, 蔡浩飞, 超临界二氧化碳布雷顿发电循环压缩机实验研究进展, 工程热物理学报, 49(10), 11-20, 1002-3364, (2020). H Hu, C Guo, H Cai, Y Jiang, S Liang, Y Guo, Dynamic characteristics of the recuperator thermal performance in a S–CO2 Brayton cycle, Energy 214, 119017, (2021). H Cai, Y Jiang, S Liang, C Guo，Y Zhu, An optimization of microtube heat exchangers for supercritical CO2 cooling based on numerical and theoretical analysis, Int. Comm. Heat Mass Transfer, 127, 105532, (2021). H Cai, Y Jiang, T Wang, S Liang, Y Zhu, Experimental investigation on convective heat transfer and pressure drop of supercritical CO2 and water in microtube heat exchangers, Int. J. Heat Mass Transfer, 163, 120443 (2020). H Hu, Y Jiang, C Guo, S Liang, Thermodynamic and exergy analysis of a S-CO2 Brayton cycle with various of cooling modes, Energy Conversion and Management, 220, 113110 (2020). Y Zhu, Y Jiang, S Liang, C Guo, Y Guo, H Cai, One-Dimensional Computation Method of Supercritical CO2 Labyrinth Seal, Applied Sciences 10 (17), 5771 (2020). H Hu, S Liang, Y Jiang, C Guo, Y Guo, Y Zhu, H Cai, Thermodynamic and exergy analysis of 2 MW S-CO2 Brayton cycle under full/partial load operating conditions, Energy Conversion and Management, 211, 112786, (2020). H Cai, S Liang, C Guo, T Wang, Y Zhu, Y Jiang, Numerical investigation on heat transfer of supercritical carbon dioxide in the microtube heat exchanger at low Reynolds numbers, Int. J. Heat Mass Transfer, 151, 119448, (2020). H Hu, D Yuan, T Wang, Y Jiang, Dynamic performance of high concentration photovoltaic/thermal system with air temperature and humidity regulation system (HCPVTH), Applied Thermal Engineering, 146, 577-587, (2019). H Hu, Z Li, Y Jiang, X Du, Thermodynamic characteristics of thermal power plant with hybrid (dry/wet) cooling system, Energy, 147, 729-741, (2018). 相变传热与热管陶洁, 郭朝红, 姜玉雁, 王涛, 工质对微通道沸腾液膜瞬态变化的影响, 工程热物理学报, 41(2),461-468,(2020). 郝炜, 王涛, 姜玉雁, 郭聪, 郭朝红, 唐大伟 , 可变形表面池沸腾换热特性研究, 工程热物理学报, 38(5), 1039-1043, (2017). SC Tan, C Guo, YY Jiang, T Wang, CZ Li, Investigation on permeability of ultra-thin screen wick with free surface using gravity flow and numerical simulation methods, Int. Comm. Heat Mass Transfer, 131, 105879, (2022). Y Liu, Z Li, Y Jiang, C Guo, D Tang, Analysis of the two-phase flow, heat transfer, and instability characteristics in a loop thermosyphon, Numerical Heat Transfer, Part A: Applications 79 (9), 656-680, (2021). C Guo, J Tao, Y Jiang, Y Sun, T Wang, Measurement and theoretical analysis of transient liquid film during micro-channel flow boiling, Int. J. Multiphase Flow, 103365, (2020). L Zhang, T Wang, S Kim, Y Jiang, The effects of wall superheat and surface wettability on nucleation site interactions during boiling, Int. J. Heat Mass Transfer, 146, 118820, (2020). L Zhang, T Wang, S Kim, S Tan, Y Jiang, Boiling enhancement on surfaces with smart wettability transition, Applied Physics Letters 115 (10), 103701, (2019). SH Kim, T Wang, L Zhang, Y Jiang, Z Li, Micro-particle image velocimetry visualization study of thermal Buoyant-Marangoni flow in microtubes, Int. J. Heat Mass Transfer, 137, 765-774, (2019). HC Su, T Li, YY Jiang, C Guo, T Wang, Experimental study on visualization of U-shaped array thermosiphon, Applied Thermal Engineering, 152, 917-924, (2019). Y Liu, Z Li, Y Li, Y Jiang, D Tang, Heat transfer and instability characteristics of a loop thermosyphon with wide range of filling ratios, Applied Thermal Engineering, 151, 262-271 (2019). J Zhao, DZ Yuan, DW Tang, YY Jiang, Heat transfer characteristics of a concentric annular high temperature heat pipe under anti-gravity conditions, Applied Thermal Engineering, 148, 817-824, (2019). SH Kim, Y Jiang, H Kim, Droplet impact and LFP on wettability and nanostructured surface, Experimental Thermal and Fluid Science, 99, 85-93, (2018). Y Liu, Z Li, Y Li, S Kim, Y Jiang, Experimental investigation of geyser boiling in a two-phase closed loop thermosyphon with high filling ratios, Int. J. Heat Mass Transfer, 127, 857-869, (2018). L Zhang, T Wang, Y Jiang, SH Kim, C Guo, A study of boiling on surfaces with temperature-dependent wettability by lattice Boltzmann method, Int. J. Heat Mass Transfer, 122, 775-784, (2018). Y Sun, C Guo, Y Jiang, T Wang, L Zhang, Transient film thickness and microscale heat transfer during flow boiling in microchannels, Int. J. Heat Mass Transfer, 116, 458-470, (2018). W. Hao, T. Wang, Y.Y. Jiang, C. Guo, C.H. Guo, Pool boiling heat transfer on deformable structures made of shape-memory-alloys, Int. J. Heat Mass Transfer, 112，236-247, (2017). Y. Sun, C. Guo, Y. Jiang, T. Wang, L. Zhang, Online measurements of surface tensions and viscosities based on the hydrodynamics of Taylor flow in a microchannel, Review of Scientific Instruments, 87 (11), 114901, (2016). T. Li, Y. Jiang, Z. Li, Q. Liu, D.W. Tang, Loop thermosiphon as a feasible cooling method for the stators of gas turbine, Applied Thermal Engineering 109, 449-453, (2016).