陈耀 - 清华大学 - 未来实验室

个人简介

陈耀博士于2022年在美国华盛顿州立大学获得机械工程博士学位。此前，他于美国南加州大学获得机械工程硕士学位，以及在厦门大学获得机械工程学士学位。他目前是清华大学未来实验室博士后，主要研究方向是软体医疗机器人。

研究领域

固体力学/柔性聚合物/限元分析

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Chen, Y., Ding, J.L., Babaiasl, M., Yang, F., Swensen, J.P., 2022. Characterization and modeling of a thermoplastic elastomer tissue simulant under uniaxial compression loading for a wide range of strain rates. J Mech Behav Biomed Mater 131. https://doi.org/10.1016/j.jmbbm.2022.105218 Hu, Y., Ding, J.-L., Chen, Y., 2020. Effects of nanofiller geometries and interfacial properties on the mechanical performance of polymer nanocomposites—A numerical study. Polymers and Polymer Composites 29, S19–S35. https://doi.org/10.1177/0967391120983636 Babaiasl, M., Boccelli, S., Chen, Y., Yang, F., Ding, J.-L., Swensen, J.P., 2020. Predictive mechanics-based model for depth of cut (DOC) of waterjet in soft tissue for waterjet-assisted medical applications. Med Biol Eng Comput 58, 1845–1872. https://doi.org/10.1007/s11517-020-02182-0 Babaiasl, M., Yang, F., Chen, Y., Ding, J., Swensen, J.P., n.d. Predicting Depth of Cut of Water-jet in Soft Tissue Simulants based on Finite Element Analysis with the Application to Fracture-directed Water-jet Steerable Needles. 2019 International Symposium on Medical Robotics (ISMR) 1–7. https://doi.org/10.1109/ISMR.2019.8710183 Chang, Y.-C., Chen, Y., Ning, J., Hao, C., Rock, M., Amer, M., Feng, S., Falahati, M., Wang, L.-J., Chen, R.K., Zhang, J., Ding, J.-L., Li, L., 2019. No Such Thing as Trash: A 3D-Printable Polymer Composite Composed of Oil-Extracted Spent Coffee Grounds and Polylactic Acid with Enhanced Impact Toughness. ACS Sustain Chem Eng 7, 15304–15310. https://doi.org/10.1021/