近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
专著
潘鹏，张耀庭 建筑结构抗震设计理论与方法（上、下册）
潘鹏，王涛，中岛正爱.在线混合实验进展-理论与应用（英文）
潘鹏，叶列平，钱稼茹，邓开来，何瑶.建筑消能减震结构设计与案例
叶列平，裴星洙 译,潘鹏 校.基于能量平衡的建筑结构抗震设计
学术论文
Zeng Y, Pan P, Zhang D, et al. Experimental study of isolation in the backfill zone of the foundation pit (IBF) method to reduce ground-borne vibration in buildings [J]. Engineering Structures, 2020, 202:109740
Wang H, Marino E M, Pan P. Design, testing and finite element analysis of an improved precast prestressed beam-to-column joint [J]. Engineering Structures, 2019, 199: 109661.
Deng K, Pan P, Shen S, et al. Experimental study of FRP-reinforced slotted RC shear walls under cyclic loading[J]. Journal of Composites for Construction, 2018, 22(4): 04018017.
Zhang D, Pan P, Zeng Y, et al. A novel robust optimum control algorithm and its application to semi-active controlled base-isolated structures [J]. Bulletin of Earthquake Engineering, 2020, 18(5): 2431-2460.
Shen S D, Pan P, Miao Q S, et al. Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)[J]. Earthquake Engineering & Structural Dynamics, 2019, 48(14): 1595-1612.
Shen S D, Cui Y, Pan P, et al. Development of prefabricated composite energy-dissipating slotted shear wall[J]. Engineering Structures, 2019, 199: 109577.
Zhang D, Pan P, Zeng Y. An optimum model reference adaptive control algorithm for smart base-isolated structures [J]. Bulletin of Earthquake Engineering, 2018, 16(11): 5647-5670.
Peng P, Dongbin Z, Yi Z, et al. Development of a tunable friction pendulum system for semi‐active control of building structures under earthquake ground motions[J]. Earthquake Engineering & Structural Dynamics, 2018, 47(8): 1706-1721.
Sun J, Pan P, Wang H. Development and experimental validation of an assembled steel double-stage yield buckling restrained brace [J]. Journal of Constructional Steel Research, 2018, 145: 330-340.
Wang H, Marino E M, Pan P, et al. Experimental study of a novel precast prestressed reinforced concrete beam-to-column joint[J]. Engineering Structures, 2018, 156: 68-81.
Pan P, Zhang D B, Nie X, et al. Development of piezoelectric energy-harvesting tuned mass damper [J]. Science China Technological Sciences, 2017, 60(3): 467-478.
Deng K, Pan P, Wang H, et al. Experimental study on slotted RC wall with steel energy dissipation links for seismic protection of buildings [J]. Engineering Structures, 2017, 145: 1-11.
Wang H, Nie X, Pan P. Development of a self-centering buckling restrained brace using cross-anchored pre-stressed steel strands [J]. Journal of Constructional Steel Research, 2017, 138: 621-632.
Wu S, Pan P, Nie X, et al. Experimental investigation on reparability of an infilled rocking wall frame structure [J]. Earthquake Engineering & Structural Dynamics, 2017, 46(15): 2777-2792.
Shoujun W, Peng P, Dongbin Z. Higher mode effects in frame pin‐supported wall structure by using a distributed parameter model [J]. Earthquake Engineering & Structural Dynamics, 2016, 45(14): 2371-2387.
Dongbin Z, Xin N, Peng P, et al. Experimental study and finite element analysis of a buckling-restrained brace consisting of three steel tubes with slotted holes in the middle tube [J]. Journal of Constructional Steel Research, 2016, 124: 1-11.
Deng K, Pan P, Wu S. Experimental study on a self‐centering coupling beam eliminating the beam elongation effect [J]. The Structural Design of Tall and Special Buildings, 2016, 25(6): 265-277.
Deng K, Pan P, Nie X, et al. Study of GFRP steel buckling restraint braces [J]. Journal of Composites for Construction, 2015, 19(6): 04015009.
Pan P, Wu S, Nie X. A distributed parameter model of a frame pin‐supported wall structure[J]. Earthquake Engineering & Structural Dynamics, 2015, 44(10): 1643-1659.
Deng K, Pan P, Su Y, et al. Shape optimization of U-shaped damper for improving its bi-directional performance under cyclic loading[J]. Engineering Structures, 2015, 93: 27-35.
Deng K, Pan P, Li W, et al. Development of a buckling restrained shear panel damper [J]. Journal of Constructional Steel Research, 2015, 106: 311-321.
Deng K, Pan P, Sun J, et al. Shape optimization design of steel shear panel dampers [J]. Journal of Constructional Steel Research, 2014, 99: 187-193.
Pan P, Zhao G, Lu X, et al. Force–displacement mixed control for collapse tests of multistory buildings using quasi‐static loading systems [J]. Earthquake engineering & structural dynamics, 2014, 43(2): 287-300.
Shi W, Pan P, Ye L, et al. Skyline‐based ground motion selection method for nonlinear time history analysis of building structures[J]. Earthquake engineering & structural dynamics, 2013, 42(9): 1361-1373.
Pan P, Tomofuji H, Wang T, et al. Development of peer‐to‐peer (P2P) internet online hybrid test system[J]. Earthquake engineering & structural dynamics, 2006, 35(7): 867-890.
Pan P, Nakashima M, Tomofuji H. Online test using displacement–force mixed control[J]. Earthquake engineering & structural dynamics, 2005, 34(8): 869-888.
刘亮, 潘鹏, 王海深, 等. 结构构件压剪试验摩擦力测量装置开发与应用[J]. 建筑结构学报, 2019, 40(6): 133-139.
潘鹏, 王海深, 郭海山, 等. 后张无黏结预应力干式连接梁柱节点抗震性能试验研究[J]. 建筑结构学报, 2018 (10): 1-6.
苏宇坤, 沈绍冬, 龚润华, 等. 装配式干式连接剪力墙结构中楼板性能试验研究[J]. 工程力学, 2019, 1-12.
王海深,潘鹏,聂鑫,刘航.三套管自复位屈曲约束支撑滞回性能研究[J].工程力学,2017,34(11):59-65.
沈绍冬,李钢,潘鹏.屈曲约束支撑与黏滞阻尼器的减震效果对比研究[J].建筑结构学报,2016,37(09):33-42.
框架-摇摆墙结构受力特点分析及其在抗震加固中的应用
邓开来,潘鹏,张东彬,李伟,李一昕.开槽式钢筋混凝土楼板试验研究[J].建筑结构学报,2016,37(04):26-31.
吴守君,潘鹏.摇摆填充墙-框架结构抗震性能研究[J].建筑结构学报,2015,36(10):81-87.
邓开来, 潘鹏, 苏宇坤, et al. 开槽U型金属屈服阻尼器横向性能试验研究[J]. 振动与冲击, 2015(12):157-163.
苏宇坤,潘鹏,邓开来,苗启松,李文峰.子结构拟动力试验方法在老旧住宅外套式加固改造工程中的应用[J].建筑结构学报,2014,35(02):8-14.
京公网安备 11010802027423号