近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Lifang Mei, Long Lin, DongBing Yan, et. al. Metal spattering in laser scanning welding of T2 copper and welding quality.Optics and Lasers in Engineering，161 (2023) 107392.（SCI/EI, IF=5.66)
[2]L-F Mei, W. Yin, D-B.Yan, Z-Q. Lei, S. Xie, L. Lin. Manufacturing and Optimisation of Maraging Steel using Laser Powder Bed Fusion Technique. lasers in engineering, 2023. （SCI/EI)
[3] Lifang Mei, Shun Xie, Dongbing Yan, Zhiqin Lei, et.al. Dynamic behavior of molten pool flow field for active laser welded-thick stainless steel plates. Materials Research Express, (8)076506, 2021.（SCI/EI)
[4] Lifang Mei, Dongbing Yan, Shun Xie, Zhiqin Lei, Xiaohong Ge. Effects of Cr2O3 active agent on the weld process dynamic behavior and joint comprehensive properties of fiber laser welded stainless steel thick plate. Optics and Lasers in Engineering, (128)106027, 2020.（SCI/EI, IF=4.64)
[5] Lifang Mei, Dongbing Yan, Jianhong QIN. Influence of SiO2 Activating Flux on the Performance of Low-power Laser Welding of Stainless Steel. lasers in engineering, 44:239-257, 2019.（SCI/EI)
[6] Mei Lifang*, Yan Dongbing, Chen Genyu, Wang Zhenhui, Chen Shuixuan. Influence of laser beam incidence angle on laser lap welding quality of galvanized steels. Optics Communications, 402: 147-158, 2017.（SCI/EI, IF=2.125)
[7] Mei Lifang, Wang Zhenghui, Yan Dongbing, Chen Shuixuan. Effect of activating flux on laser penetration welding performance of galvanized steel. International Journal of Advanced Manufacturing Technology, 91(1-4): 1069-1078, 2017. (SCI/EI, IF=2.496)
[8] Lifang Mei, Genyu Chen, Dongbing Yan, Dan Xie, Xiaohong Ge, Mingjun Zhang. Impact of inter-sheet gaps on laser overlap welding performance for galvanised steel. Journal of Materials Processing Technology, 226:157-168, 2015（SCI/EI, IF=3.647)
[9] Mei Lifang, Yan Dongbing, Chen Gengyu, et al. Comparative study on CO2 laser overlap welding and resistance spot welding for automotive body in white. Materials and Design, 78:107-117, 2015（SCI/EI, IF=4.525)
[10] Mei Lifang, Yan Dongbing , Yi Jiming, Chen Gengyu, Ge Xiaohong. Comparative analysis on overlap welding properties of fiber laser and CO2 laser for body-in-white sheets. Materials and Design, 49: 905-912. 2013（SCI收录：000318547000109、EI）
[11] Mei Lifang, Yi Jiming, Yan Dongbing, Ge Xiaohong, et al. Comparative study on CO2 laser overlap welding and resistance spot welding for galvanized steel. Materials and Design, 40:433-442, 2012（SCI收录：000304545000056、EI）
[12] Genyu Chen, Lifang Mei, Mingjun Zhang, Yi Zhang et al. Researc on key influence factors of laser overlap welding of automobile body galvanized steel. Optics & Laser technology, 45:726–733, 2013 （SCI收录号：000310401800113、EI）
[13] Lifang Mei*, Genyu Chen et al. Research on Laser Welding of High- strength Galvanized Automobile Steel Sheets, Optics and lasers in Engineering, 2009, 47:1117-1124 (SCI、EI)
[14] Genyu Chen, Lifang Mei*, Bi Zhang, Guogui Chen. Experiment Study and Numerical Simulation on Laser Truing and Dressing of Bronze-bonded Diamond Wheel. Optics and lasers in Engineering, 48: 295-304 , 2010 (SCI、EI)
[15] MEI Li-fang*, CHEN Gen-yu, ZHANG Ming-jun, LIU Xu-fei, WANG Zujian. Study on Three-dimensional Laser Cutting Technology in Auto-body Panel, SPIE，2009，7515：1-11 (EI)
[16] L.F.Mei*, G. Y.Chen, B. Zhang et.al. Measurement of YAG laser absorptance by artificial diamond and cubic boron nitride. Optics& Laser Technology, 2009, 41:770-777 (SCI、EI)
[17] Genyu Chen, Lifang Mei*, Bi Zhang, Guogui Chen. Experiment Study and Numerical Simulation on Laser Truing and Dressing of Bronze-bonded Diamond Wheel. Optics and lasers in Engineering, 48: 295-304, 2010 (SCI、EI)
[18] Genyu Chen, Lifang Mei*, et al. Numerical Simulation Study on Truing and Dressing of Bronze-bonded Diamond Wheel with Pulsed Laser. Key Engineering Materials, 2008, 359(1):166-170 (SCI、EI)
[19] G.Y. Chen, L.F.Mei*, B.Zhang, W.M.You, J.Y.Yu and K. Hunag. Laser Truing and Dressing of Bronze-Bonded Diammond Grinding Wheel and Its High-Speed Grinding Performance. In: ISAAT2007/SME International Grinding Conference. Michigan USA, 2007, 607-614 (EI)
[20] Yan, D.B ,Mei, L.F, Li, P. Z, Lei, Z. Q, et.al. Effcts of different active fluxes on the molten pool pool behaviors of laser welded thick stainless steel plates. Journal of laser Applications, 33, 022019, 2021 （SCI/EI)
[21] D-B. Yan, S. Xie, L-F. Mei, Z-Q. Lei, X-F. Chang,et.al. Effects of various active fluxes on the quality of laser welded thick stainless steel plates. Lasers in Engineering, 46: 227-243, 2021（SCI)
[22] Tao Li, Xuefeng Chang, Lifang Mei, et.al. Solvothermal preparation of spherical Bi2O3 nanoparticles uniformly distributed on Ti3C2Tx for enhanced capacitive performance. Nanoscale Advances, 2021. 10.1039/d1na00443c
[23]Chen G.-Y., Zhu D.-J., Peng K., You W.-M., Li L.-J., Mei L.-F.Ablation mechanism of bronze-bonded diamond wheels dressing by pulsed laser (2007) Zhongguo Jiguang/Chinese Journal of Lasers, 34 (SUPPL.) , pp. 245-249.
[24]雷智钦，梅丽芳，严东兵，陈根余，殷伟，谢顺. 选区激光熔化SiC/18Ni300马氏体模具钢复合材料性能研究，激光与光电子学进展，2023,60（1）：0116001-1 ~ 0116001-8
[25]谢顺，梅丽芳，严东兵，闫哲，王九龙. 紫铜激光扫描焊接焊缝形貌及微观组织研究，热加工工艺，2023,52（19）：115-119
[26]林龙，梅丽芳，严东兵，谢顺，杨军. T2紫铜光纤激光焊接工艺与性能研究. 应用激光，2023,43（12）：1-6
[27]杨军，梅丽芳，严东兵，谢顺，殷伟. 碳钢表面激光除漆的正交试验优化，电镀与涂饰，2022，41（22）：1627-1633
[28] 梅丽芳，谢顺，严东兵，雷智钦等.活性激光焊接不锈钢厚板熔池流场动态行为研究. 激光应用，2021，41（6）:8-14
[29] 谢顺，梅丽芳，殷伟等. 汽车电子元件引脚表面镀层的激光清洗试验研究，机电技术，1:35-38+47，2021
[30] 梅丽芳，秦建红，严东兵. 活性激光焊接304不锈钢温度场的数值与试验研究. 激光技术, 2020，44（4）：492-496
[31] 梅丽芳, 王峥慧, 严东兵, 陈水宣.活性剂对不锈钢激光焊接性能的影响，应用激光, 2017, (03): 373-378
[32] 梅丽芳, 王峥慧, 严东兵, 陈水宣. 基于正交极差分析法的车身镀锌钢板激光焊接质量研究, 应用激光, 2017, (01): 85-91
[33] 梅丽芳, 王峥慧, 严东兵, 葛晓宏.车身镀锌钢活性激光熔透焊试验研究.热加工工艺, 2016, (17): 31-34+38
[34] 梅丽芳，陈由海，严东兵等.激光焊接熔池特性的三维数值模拟.郑州大学学报，2015, 36（6）：85-89
[35] 梅丽芳，陈根余, 张明均，李时春. 车用铝合金的光纤激光搭接焊的研究.中国激光, 第37卷，第8期，2091-2096页, 2010（EI收录:20103713225623）
[36] 梅丽芳，陈根余等.车身覆盖件的三维激光切割工艺研究,中国激光, 第36卷第12期， 3308-3312页，2009 (EI)
[37] 陈根余，梅丽芳等.激光焊接、切割在汽车制造中的应用. 激光与光电子学进展, 第49卷，第9期，17-23页， 2009
[38] 陈根余，刘旭飞，梅丽芳等.车身覆盖件的三维激光切割转角过烧的研究.激光杂志, 第30卷，第4期，62-63页，2009
[39] 陈根余，王祖建，梅丽芳等.激光入射角度对车身用镀锌板焊接性能的影响，激光技术，第34卷，第6期，729-732页，2010
[40] 顾春影，陈根余，梅丽芳等.车身零部件的激光搭接焊与电阻点焊对比分析.热加工工艺，第40卷，第17期，136-142, 2011
[41] 梅丽芳，陈根余，易际明，刘金武等. 车身异种材料光纤激光搭接焊研究.中国科技论文在线精品论文，第 4期，第4卷，342-348，2011
[42] 梅丽芳，易际明，刘金武等. 车用轮椅跳板门装置设计与受力分析. 长江大学学报（自科版），第10卷，第19期，102-105页，2013
[43] 梅丽芳，严东兵. 应用于汽车制造中的新型激光加工技术. 科技致富向导，第12期，26页，2013
[44] 陈根余，陈建明，梅丽芳，王祖建.汽车白车身激光焊接生产线单元设计及焊接分析.激光技术，2011，第35卷，第1期，532-537，2011
[45] 张明军, 陈根余, 李时春, 梅丽芳, 张正. 车用铝合金与镀锌钢光纤激光搭接焊试验研究.中 国激光，第38卷，第6期，1-6，2011
[46]陈根余,顾春影,梅丽芳,李时春.激光焊接技术在汽车制造中的应用与激光组焊单元设计[J].电焊机,2010,40(05):32-38.
[47]张屹,李时春,金湘中,陈根余,梅丽芳.镀锌钢板激光焊接关键技术研究[J].激光与光电子学进展,2010,47(07):33-41.
[48]唐友名,黄红武,梅丽芳.美国侧面碰撞规程下轿车变形侵入仿真研究[J].中国安全科学学报,2011,21(05):29-34.
[49]严东兵,赵海兵,陈水宣,梅丽芳.颗粒干冰制造机液压控制系统的设计[J].重庆理工大学学报(自然科学),2014,28(08):39-43.
[50]袁志群,于国飞,梅丽芳.稳态侧风作用下类客车形体气动特性分析[J].厦门理工学院学报,2016,24(03):1-5.
[51]严东兵,梅丽芳,易际明.新型气液联合液压锤冲击器系统的仿真研究[J].郑州大学学报(工学版),2014,35(04):120-123.
[52]梅丽芳,严东兵,许建民. 基于OBE理念的汽车服务工程专业课程体系优化与实践[J]. 科教导刊-电子版（下旬）,2021(10):106-108.
[53]梅丽芳,严东兵. 基于多元教学法的"汽车服务系统规划"课程改革探析[J]. 西部素质教育,2019,5(4):158-159.
[54]梅丽芳,严东兵,许建民. 基于OBE理念的汽车服务工程专业课程体系优化与实践[J]. 科教导刊-电子版（下旬）,2021(10):106-108.
[55]许建民,刘显贵,向铁明,梅丽芳. 新工科背景下面向专业认证的汽车服务工程专业课程体系改革[J]. 现代职业教育. 2020(18)
[56]陈根余,陈国桂,黄孔,梅丽芳,余春荣. 激光修整青铜金刚石砂轮精度研究[J]. 中国激光. 2009(05)
[57]严东兵,胡均平,梅丽芳,郭勇. 氮爆式液压打桩锤结构原理与分析[J]. 工程机械. 2009(04)
[58]严东兵,徐绍军,王群,梅丽芳. 新型氮爆式液压桩锤设计与分析[J]. 现代制造工程. 2008(12)
京公网安备 11010802027423号