近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
S-shaped characteristics of pump turbine with large guide vane opening by experimental and numerical analysis AIP ADVANCES[2158-3226], Published 2023, Volume 13, Issue 1,
Investigation of pressure pulsation induced by quasi-steady cavitation in a centrifugal pump PHYSICS OF FLUIDS[1070-6631], Published 2023, Volume 35, Issue 2,
转速对水泵水轮机压水调相运行水环流动的影响 排灌机械工程学报[1674-8530], Published 2023, Volume 41, Issue 1, Pages 16-21+31
Experimental and numerical study on flow instability of pump-turbine under runaway conditions Renewable Energy[0960-1481], Published 2023, Volume 210, Pages 335-345
Numerical analysis of bubble size effect in a gas-liquid two-phase rotodynamic pump by using a bubble coalescence and collapse model Chemical Engineering Research and Design[0263-8762], Published 2023, Volume 191, Pages 617-629
Numerical Investigation on the Transition Flow around NLF Airfoil Energies[1996-1073], Published 2023, Volume 16, Issue 4,
Effect of rotating speed on water-ring flow of pump-turbine in pressurized water phase modulation operation 转速对水泵水轮机压水调相运行水环流动的影响 Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2023, Volume 41, Issue 1,
Influence of leading-edge tubercles on the aerodynamic performance of a horizontal-axis wind turbine: A numerical study ENERGY[0360-5442], Published 2022, Volume 239,
Study on Pressure Pulsation Induced by Cavitation at the Tongue of the Volute in a Centrifugal Pump ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING[2193-567X], Published 2022, Volume 47, Issue 12, Pages 16033-16048
Numerical and experimental investigation of erosive wear in Francis runner blade optimized for sediment laden hydropower projects in Nepal Sustainable Energy Technologies and Assessments[2213-1388], Published 2022, Volume 51,
Optimization design for an impeller of the multiphase rotodynamic pump handling gas-liquid two-phase flow PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2022, Volume 236, Issue 8, Pages 1544-1557
Transportability Improvement of a Gas-Liquid Rotodynamic Pump Using the Two-Step Multi-Objective Optimization Strategy FRONTIERS IN ENERGY RESEARCH[2296-598X], Published 2022, Volume 10,
Investigation on pressure fluctuations induced by flow instabilities in a centrifugal pump OCEAN ENGINEERING[0029-8018], Published 2022, Volume 258,
Investigation of the mechanism of unsteady flow induced by cavitation at the tongue of a centrifugal pump based on the proper orthogonal decomposition method PHYSICS OF FLUIDS[1070-6631], Published 2022, Volume 34, Issue 10,
水泵水轮机飞逸工况下转轮内部流动分析研究 水电能源科学[1000-7709], Published 2022, Volume 40, Issue 11, Pages 181-184+72
水泵水轮机水环特性及其控制 中国电机工程学报[0258-8013], Published 2022, Volume 42, Issue 22, Pages 8232-8243
导叶开度对水泵水轮机调相运行水环流动的影响 排灌机械工程学报[1674-8530], Published 2022, Volume 40, Issue 10, Pages 981-986
Internal flow characteristics of water-ring of pump-turbine during pump mode's starting-up Journal of Physics: Conference Series[1742-6588], Published 2022, Volume 2217, Issue 1,
Analysis of phase interaction and gas holdup in a multistage multiphase rotodynamic pump based on a modified Euler two-fluid model RENEWABLE ENERGY[0960-1481], Published 2021, Volume 164, Pages 1496-1507
Multi-objective optimization design of a centrifugal impeller by positioning splitters using GMDH, NSGA-III and entropy weight-TOPSIS Journal of Mechanical Science and Technology[1738-494X], Published 2021,
Effect of tip clearance size on tubular turbine leakage characteristics Processes[2227-9717], Published 2021, Volume 9, Issue 9,
Study on Pressure Fluctuation in Vaneless Space of Pump-Turbine Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2021, Volume 42, Issue 5, Pages 1213-1223
Influence of Wrap Angle on the Hydraulic Characteristics of Double Volute Centrifugal Pump 叶片包角对双蜗壳离心泵水力特性的影响 Reneng Dongli Gongcheng/Journal of Engineering for Thermal Energy and Power[1001-2060], Published 2021, Volume 36, Issue 3, Pages 35-42+105
Optimal design of large gap magnetic fluid sealing device in a liquid environment JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS[0304-8853], Published 2021, Volume 540,
Metamodeling-based parametric optimization of a bio-inspired Savonius-type hydrokinetic turbine RENEWABLE ENERGY[0960-1481], Published 2021, Volume 180, Pages 560-576
A Review on Process and Practices in Operation and Design Modification of Ejectors FLUIDS[2311-5521], Published 2021, Volume 6, Issue 11,
Sediment erosion in low specific speed francis turbines: A case study on effects and causes Wear[0043-1648], Published 2020, Volume 442-443,
Investigation of the Noise Induced by Unstable Flow in a Centrifugal Pump ENERGIES[1996-1073], Published 2020, Volume 13, Issue 3,
Cavitating Flow Suppression in the Draft Tube of a Cryogenic Turbine Expander through Runner Optimization PROCESSES, Published 2020, Volume 8, Issue 3,
Suppression of secondary flows in a centrifugal impeller by optimisation design ENGINEERING COMPUTATIONS[0264-4401], Published 2020,
Pressure fluctuations in vaneless space of pump-turbines with large blade lean runners in the S- shaped region RENEWABLE ENERGY[0960-1481], Published 2020, Volume 153, Pages 1283-1295
Pressure fluctuation and flow instability in S-shaped region of a reversible pump-turbine RENEWABLE ENERGY[0960-1481], Published 2020, Volume 154, Pages 826-840
Characteristics of bubble motion and distribution in a multiphase rotodynamic pump JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING[0920-4105], Published 2020, Volume 193,
Experimental investigation of pressure distribution characteristics of a flying-wing model using PSP INTERNATIONAL JOURNAL OF MODERN PHYSICS B[0217-9792], Published 2020, Volume 34, Issue 14-16,
流动参数对混输泵全流道内气液相间作用特性的影响 工程热物理学报[0253-231X], Published 2020, Issue 08, Pages 1911-1916
Numerical Investigation of the Effects of Leakage Flow From Guide Vanes of Francis Turbines using Alternative Clearance Gap Method JOURNAL OF APPLIED FLUID MECHANICS[1735-3572], Published 2020, Volume 13, Issue 5, Pages 1407-1419
Comprehensive Hydraulic Improvement and Parametric Analysis of a Francis Turbine Runner ENERGIES[1996-1073], Published 2019, Volume 12, Issue 2,
Effect of sediment erosion on flow around guide vanes of Francis turbine RENEWABLE ENERGY[0960-1481], Published 2019, Volume 136, Pages 1022-1027
Numerical analysis for the effect of tip clearance in a low specific speed mixed-flow pump ADVANCES IN MECHANICAL ENGINEERING[1687-8132], Published 2019, Volume 11, Issue 3,
A numerical simulation model for the vortex induced vibration of flexible risers using dynamic stiffness matrices OCEAN ENGINEERING[0029-8018], Published 2019, Volume 178, Pages 306-320
Detection of the Flow State for a Centrifugal Pump Based on Vibration ENERGIES[1996-1073], Published 2019, Volume 12, Issue 16,
Static stability of pump-turbine units in turbine mode 水轮机工况下的水泵水轮机静态稳定 Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2019, Volume 38, Issue 6, Pages 92-100
Methodology to Predict Effects of Leakage Flow from Guide Vanes of Francis Turbine Journal of Physics: Conference Series[1742-6588], Published 2019, Volume 1266, Issue 1,
A study on the evolution of the instability in two model pump-turbine runners with large blade leans IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 7,
Multiobjective optimization design of ultrahigh-head pump turbine runners with splitter blades IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 7,
Optimisation of a pump-as-turbine runner using a 3D inverse design methodology IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 4,
Random vibration characteristics of perforated plates in parallel flow IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 6,
A study on the three-phase separator machine (tricanter) for olive oil extraction Journal of Theoretical and Applied Mechanics (Bulgaria)[0861-6663], Published 2019, Volume 49, Issue 3, Pages 233-240
Orthogonal Optimization Design of Centrifugal Pump Based on Blade Load Distribution Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2019, Volume 40, Issue 5, Pages 1065-1071
Investigation on Flow Characteristics of Pump-Turbine Runners With Large Blade Lean JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2018, Volume 140, Issue 3,
Energy Performance and Radial Force of a Mixed-Flow Pump with Symmetrical and Unsymmetrical Tip Clearances ENERGIES[1996-1073], Published 2017, Volume 10, Issue 1,
Pressure Fluctuations in the S-Shaped Region of a Reversible Pump-Turbine ENERGIES[1996-1073], Published 2017, Volume 10, Issue 1,
Influence of Tip Clearance on Pressure Fluctuation in Low Specific Speed Mixed-Flow Pump Passage ENERGIES[1996-1073], Published 2017, Volume 10, Issue 2,
Numerical study of pressure fluctuation in the whole flow passage of a low specific speed mixed-flow pump ADVANCES IN MECHANICAL ENGINEERING[1687-8140], Published 2017, Volume 9, Issue 5,
A review on flow and sediment erosion in guide vanes of Francis turbines RENEWABLE & SUSTAINABLE ENERGY REVIEWS[1364-0321], Published 2017, Volume 75, Pages 1054-1065
Numerical Study of Pressure Fluctuation in a Gas- Liquid Two-Phase Mixed-Flow Pump ENERGIES[1996-1073], Published 2017, Volume 10, Issue 5,
Selection of guide vane profile for erosion handling in Francis turbines RENEWABLE ENERGY[0960-1481], Published 2017, Volume 112, Pages 328-336
Study of Tip Clearance Effects on Performances and Flow Field of a Low Specific Speed Mixed-flow Pump Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2017, Volume 53, Issue 22, Pages 182-189
Parametric design of an ultrahigh-head pump-turbine runner based on multiobjective optimization Energies[1996-1073], Published 2017, Volume 10, Issue 8,
Unstable flow characteristics in s-shaped region of pump-turbine runners with large blade lean American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2017, Volume 1A-2017,
Pressure fluctuation and flow pattern of a mixed-flow pump under design and off-design conditions Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science[0954-4062], Published 2017, Volume 232, Issue 13, Pages 2430-2440
Effect of Guide Vane Clearance Gap on Francis Turbine Performance ENERGIES[1996-1073], Published 2016, Volume 9, Issue 4,
Numerical investigation on frequency jump of flow over a cavity using large eddy simulation ASME Journal of Fluid Engineering[0098-2202], Published 2015, Volume 137, Issue 8, Pages 10
Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition Eigineering Computations[0264-4401], Published 2015, Volume 33, Issue 6, Pages 1549-1566
Optimization design of a reversible pump-turbine runner with high efficiency and stability Renewable Energy[0960-1481], Published 2015, Volume 81, Pages 366-376
Interphase force analysis for air-water bubbly flow in a multiphase rotodynamic pump ENGINEERING COMPUTATIONS[0264-4401], Published 2015, Volume 32, Issue 7, Pages 2166-2180
Numerical investigation of influence of inlet guide vanes on unsteady flow in a centrifugal pump PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2015, Volume 229, Issue 18, Pages 3405-3416
A study on the design and performance analysis of pump-turbine system ISFMFE 2014, The 6th International Symposium on Fluid Machinery and Fluid Engineering, Published 2014,
Characteristics of pressure fluctuation and torque in a centrifugal pump under cavitation condition ISFMFE 2014, The 6th International Symposium on Fluid Machinery and Fluid Engineering, Published 2014,
Development of a pump-turbine runner based on multiobjective optimization 27th IAHR SYMPOSIUM, Montreal, Canada[1755-1307], Published 2014, Volume 22, Issue 1, Pages 12
Effect of Virtual Mass Force on the Mixed Transport Process in a Multiphase Rotodynamic Pump Advances in Mechanical Engineering[1687-8132], Published 2014, Volume 2014,
Influence of Blade Wrap Angle on Centrifugal Pump Performance by Numerical and Experimental Study CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2014, Volume 27, Issue 1, Pages 171-177
Influence of Prewhirl Regulation by Inlet Guide Vanes on Cavitation Performance of a Centrifugal Pump Energies[1996-1073], Published 2014, Volume 17, Issue 2, Pages 1050-1065
Multiobjective optimization design of a reversible Pump-turbine runner. AFORE 2014, 4th Asia-Pacific Forum on revewable Energy, Published 2014, Pages 260
Numerical investigation of unsteady turbulent flow in a centrifugal pump at partial load 27th IAHR SYMPOSIUM, Montreal, Canada[1755-1307], Published 2014, Volume 22, Issue 3, Pages 11
Numerical simulation of unsteady cavitation flow in a centrifugal pump at off-design conditions Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science[0954-4062], Published 2014,
Pressure fluctuations of a pump-turbine in the S-shaped Region ISFMFE 2014, The 6th International Symposium on Fluid Machinery and Fluid Engineering, Published 2014,
Turbulent flow simulation using large eddy simulation combined with characteristic-based split scheme. Computers & Fluids[0045-7930], Published 2014, Volume 94, Issue 5, Pages 161-172
可逆式水泵水轮机转轮的三维反问题优化设计 农业工程学报, Published 2014, Volume 30, Issue 13, Pages 78-85
水泵水轮机转轮三维反问题设计与特性研究 农业机械学报, Published 2014, Volume 45, Issue 12, Pages 93-98
离心泵叶轮区瞬态流动及压力脉动特性 机械工程学报, Published 2014, Volume 50, Issue 10, Pages 164-169
离心泵涡舌区非定常流动特性 北京理工大学学报, Published 2014, Volume 34, Issue 7, Pages 670-674
高温气冷堆主氦风机叶轮过盈配合有限元分析 核动力工程[0258-0926], Published 2014, Volume 35, Issue 1, Pages 142-146
A thermohydrodynamic analysis of dry gas seals for High-Temperature Gas-Cooled reactor JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME[0742-4787], Published 2013, Volume 135, Issue 2, Pages -
Application of two-fluid model in the unsteady flow simulation for a multiphase rotodynamic pumpConference on Pumps and 6th International Fans with Compressors and Wind Turbines, Published 2013,
Cavitation flow simulation for a centrifugal pump at a low flow rate CHINESE SCIENCE BULLETIN[1001-6538], Published 2013, Volume 58, Issue 8, Pages 949-952
Effect of virtual mass force on the mixed transport process in a multiphase rotodynamic pump 35th IAHR World Congress, Published 2013,
Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellers CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2013, Volume 26, Issue 3, Pages 469-475
Full 3-D viscous optimization design of a reversible pump turbine runner 6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Pages -
Iteration design of direct and inverse problems and flow analysis of mixed-flow pump impellers Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2013, Volume 53, Issue 2, Pages 179-183
Numerical calculation of unsteady flow fields: feasibility of applying the Weis-Fogh mechanism to water turbines JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2013, Volume 135, Issue 10, Pages -
Regualtion fast multipole boundary element method for potential flow problems in 3D vortex method 36th International Conference on Boundary Elements and other Mesh Reduction Techniques, Published 2013, Pages 414-425
混流泵叶轮的正反问题迭代法设计及流动分析 清华大学学报(自然科学版)[1000-0054], Published 2013, Issue 2,
An integrated coupling framework for highly nonlinear fluid-structure problems COMPUTERS & FLUIDS[0045-7930], Published 2012, Volume 60, Pages 36-48
Application of J-Groove to the suppression of swirl flow in the draft tube of a Francis IOP Conf. Series: Earth and Environmental Science 15 (2012) 032033., Published 2012,
Direct and inverse iterative design method for centrifugal pump impellers PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2012, Volume 226, Issue A6, Pages 764-775
Influence of axial distance on pre-whirl regulation by the inlet guide vanes for a centrifugal pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2012, Volume 55, Issue 4, Pages 1037-1043
Internal flow characteristics in the draft tube of a Francis turbine Journal of the Korean Society of Marine Engineering, Published 2012, Volume 36, Issue 5, Pages 618-626
Numerical calculations for internal flow field in centrifugal pump impeller Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering[1002-6819], Published 2012, Volume 28, Issue 14, Pages 47-51
Numerical simulation of cavitation for 3-D ALE15 hydrofoil Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2012, Volume 43, Issue 9, Pages 49-52+48
Numerical simulation of cavitation in a centrifugal pump at low flow rate CHINESE PHYSICS LETTERS[0256-307X], Published 2012, Volume 29, Issue 1, Pages -
Optimization and Inverse Design of Pump Impeller IOP Conf. Series: Earth and Environmental Science 15 (2012) 032032., Published 2012,
Solution of three-dimensional viscous flows using integral velocity-vorticity formulation ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS[0955-7997], Published 2012, Volume 36, Issue 12, Pages 1942-1951
Stress analysis of Francis turbine runner based on fluid-structure coupling Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2012, Volume 31, Issue 4, Pages 216-220+250
There dimensional vortex method simulation of unsteady flow in hydraulic turbine Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics[0459-1879], Published 2012, Volume 44, Issue 3, Pages 519-527
Three-dimensional vortex simulation of unsteady flow in hydraulic turbines INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS[0271-2091], Published 2012, Volume 69, Issue 10, Pages 1679-1700
Unsteady flow field numerical calculations of a ship's rotating Weis-Fogh-type propulsion mechanism with the advanced vortex method JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2012, Volume 26, Issue 2, Pages 437-446
三维ale15翼型空化流动数值模拟 农业机械学报[1000-1298], Published 2012, Issue 9,
基于流固耦合的混流式水轮机转轮应力特性分析 水力发电学报[1003-1243], Published 2012, Issue 4,
水力机械非定常流动的三维涡方法计算 力学学报[0459-1879], Published 2012, Issue 3,
流固强耦合问题的cae集成软件平台及其工程应用 Published 2012,
离心泵叶轮内部流场的数值计算 农业工程学报[1002-6819], Published 2012, Issue 14,
Drag reduction from fences on a square prism near plane wall JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2011, Volume 25, Issue 12, Pages 3063-3068
Modeling and experiment of the hydraulic losses of centrifugal pump with inlet guide vanes Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 4, Pages 191-196
Numerical simulation of unsteady flows of fluid machinery using discrete vortex method Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 5, Pages 178-185
Numerical simulation of unsteady flows through a francis turbine runner using vortex methods ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 1751-1761
前置导叶离心泵的损失建模及试验 水力发电学报[1003-1243], Published 2011, Issue 4,
基于正反问题迭代方法的离心泵叶轮设计及流场模拟 Published 2011,
流体机械非定常流动的涡方法数值模拟 水力发电学报[1003-1243], Published 2011, Issue 5,
Centrifugal pump impeller design by using direct inverse problem iteration Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2010, Volume 41, Issue 7, Pages 30-35+10
Experiment and numerical simulation of cavitation performance for centrifugal pump with inlet guide vane Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2010, Volume 46, Issue 18, Pages 177-182
Numerical prediction of impact force in cavitating flows JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2010, Volume 132, Issue 10,
Numerical Prediction of Impact Force in Cavitating Flows 25th IAHR Symposium on Hydraulic Machinery and Systems[1755-1307], Published 2010, Volume 12, Issue 1,
Numerical simulation of cavity flow around a hydrofoil Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2010, Volume 50, Issue 7, Pages 1058-1062
Parameter control in temperature analogy method Jisuan Wuli/Chinese Journal of Computational Physics[1001-246X], Published 2010, Volume 27, Issue 3, Pages 396-406
Vibration of thin cambered blade based on temperature analogy Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2010, Volume 46, Issue 10, Pages 170-175
基于温度体动网格方法的微弯薄翼振动问题 机械工程学报[0577-6686], Published 2010, Issue 10,
基于温度体模型的动网格生成方法及在流固耦合振动中的应用 振动与冲击[1000-3835], Published 2010, Issue 4,
基于特征线分离算法的大涡模拟 工程力学[1000-4750], Published 2010, Issue 2,
带有前置导叶离心泵空化性能的试验及数值模拟 机械工程学报[0577-6686], Published 2010, Issue 18,
强非线性大规模流-固耦合问题的数值仿真技术 第六届中国CAE工程分析技术年会论文集, Published 2010, Pages 33-44
温度体动网格模型中控制参数的研究 计算物理[1001-246X], Published 2010, Issue 3,
离心泵叶轮正反问题迭代设计方法 农业机械学报[1000-1298], Published 2010, Issue 7,
绕水翼空化流动的数值模拟 清华大学学报(自然科学版)[1000-0054], Published 2010, Issue 7,
Delaunay triangulation for internal node generation in frontal approach and application Jisuan Wuli/Chinese Journal of Computational Physics[1001-246X], Published 2009, Volume 26, Issue 4, Pages 527-533
Effect of inflow angle on high Reynolds number flows in circular-sectioned 90 bends Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2009, Volume 49, Issue 12, Pages 1971-1975
Investigation of vortical flows over an oscillating body using a Lagrangian vortex method Frontiers of Energy and Power Engineering in China[1673-7393], Published 2009, Volume 3, Issue 3, Pages 297-306
Numerical simulation and experiment of inlet guide vane pre-whirl regulation for centrifugal pump Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2009, Volume 40, Issue 12, Pages 101-106
Numerical study on characteristics based on non-incremental split scheme Paiguan Jixie/Drainage and Irrigation Machinery[1005-6254], Published 2009, Volume 27, Issue 5, Pages 327-331
入流角对圆截面90°弯管内高雷诺数流动的影响 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2009, Issue 12,
前置导叶预旋调节离心泵性能的数值预测与试验 农业机械学报[1000-1298], Published 2009, Issue 12,
基于特征线方程N-S方程非增量型分离算法 排灌机械[1005-6254], Published 2009, Issue 5,
射流放水阀动态关闭过程研究 流体机械[1005-0329], Published 2009, Issue 12,
混流式水轮机转轮区叶道涡压力脉动数值研究 大电机技术[1000-3983], Published 2009, Issue 6,
结合前沿推进的delaunay三角化网格生成及应用 计算物理[1001-246X], Published 2009, Issue 4,
结合自适应网格的基于特征线方程的分离算法 力学学报[0459-1879], Published 2009, Issue 5,
轴流泵叶轮内部流场大涡模拟及分析 流体机械[1005-0329], Published 2009, Issue 11,
Flow computations for the design of high specific speed mixed-flow pumps Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 2, Pages 219-223
Numerical simulation of unstead vortical flows by a fast lagrangian vortex method Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics[0459-1879], Published 2008, Volume 40, Issue 1, Pages 9-18
Numerical simulation of unsteady flows past a delta wing using a 3-D vortex method Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 2, Pages 256-259+263
三角翼周围非定常流动的三维涡方法数值模拟 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2008, Issue 2,
用于高比转速混流泵设计的流场计算 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2008, Issue 2,
钟形进水流道吸水室的后壁距研究 流体机械[1005-0329], Published 2008, Issue 3,
非定常流动的快速拉格朗日涡方法数值模拟 力学学报[0459-1879], Published 2008, Issue 1,
Computer aided design and flow analysis of high specific speed mixed-flow pump impeller Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2007, Volume 47, Issue 9, Pages 1435-1438
Numerical simulation of vortex shedding and lock-in characteristics for a thin cambered blade JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2007, Volume 129, Issue 10, Pages 1297-1305
二维非定常有涡流动的数值模拟方法 清华大学学报(自然科学版)[1000-0054], Published 2007, Issue 2,
用拉格朗日涡方法数值模拟绕微型飞行器和mems器件流动 2002-2005预研基金空气动力学项目技术交流总结会论文集, Published 2007, Pages 199-204
钟形进水流道吸水室后壁的优化设计 江苏大学学报(自然科学版)[1671-7775], Published 2007, Issue 3,
高比转速混流泵叶轮正反问题计算 清华大学学报(自然科学版)[1000-0054], Published 2007, Issue 9,
Investigation on probability of self-oscillation induced by vortex shedding from a thin cambered blade Chinese Journal of Mechanical Engineering[0577-6686], Published 2006, Volume 42, Issue 1, Pages 35-9
Numerical analysis of unsteady viscous flow through a Weis-Fogh-type ship propulsion mechanism using the advanced vortex method JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2006, Volume 128, Issue 3, Pages 481-487
叶片表面旋涡脱落诱发自激振动的可能性 机械工程学报[0577-6686], Published 2006, Issue 1,
离心泵螺旋形压水室内流场的大涡模拟 农业机械学报[1000-1298], Published 2006, Issue 7,
Computation of unsteady incompressible viscous flows around a cascade by using an implicit SMAC scheme Proc. of The 8th Asian International Conference of Fluid Machinery, Published 2005, Pages 765-772
Finite volume solution of the Navier-Stokes equations in velocity-vorticity formulation INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS[0271-2091], Published 2005, Volume 48, Issue 6, Pages 607-629
Investigation of Vortex Shedding from a Thin Cambered Blade Proc. of The 8th Asian International Conference of Fluid Machinery, Published 2005, Pages 611-618
Numerical simulation of unsteady interaction of centrifugal impeller with its diffuser using Lagrangian discrete vortex method ACTA MECHANICA SINICA[0567-7718], Published 2005, Volume 21, Issue 1, Pages 40-46
水轮发电机组非线性控制器优化研究 中国电机工程学报[0258-8013], Published 2005, Issue 22,
求解不可压三维湍流的隐式smac方法 清华大学学报(自然科学版)[1000-0054], Published 2005, Issue 11,
高比转速混流泵叶轮设计方法 江苏大学学报(自然科学版)[1671-7775], Published 2005, Issue 3,
Probability of self-oscillation induced by vortex shedding from a thin cambered blade Experimental Thermal and Fluid Science[0894-1777], Published 2004, Volume 29, Issue 1, Pages 129-135
离心泵压水室内部流动数值模拟 江苏大学学报(自然科学版)[1671-7775], Published 2004, Issue 3,
A lagrangian vortex method for flows over a moving bluff body Computational Fluid Dynamics JOURNAL[0918-6654], Published 2003, Volume 11, Issue 4, Pages 363-369
An experimental study of vortex shedding and lock-in characteristic for a thin cambered blade Proceeding of 7th Asian International Fluid Machinery Conference, Published 2003,
Computing the flow around a moving bluff body by a Lagrangian vortex method Proc. of the Second International Conference on Vortex Methods, Published 2001, Pages 157-164
Numerical investigation of unsteady deformation of eddy structure by vortex methods Proc. of the Second International Conference on Vortex Methods, Published 2001, Pages 63-70
ディフユーザポンプ非設計点の動静翼干渉に関する数値解析 日本機械学会流体工学部門講演会講演概要集, Published 2001, Pages 143
一様流中の円柱に誘起するcross-flow衝突振動現象について 日本機械学2001年次大会講演論文集, Published 2001, Pages 113
Application of direct vortex method to the unsteady rotor-stator interaction at off-design points in a diffuser pump Proc. Of the Fourth International Conference on Hydrodynamics, Published 2000, Pages 373-378
Application of vortex method for the unsteady flow analysis(Invited) Proc. of the Second International Symposium on Fluid Machinery and Fluid Engineering, Published 2000, Pages 375-382
In-line and impact oscillation of a circular cylinder in a uniform flow Proc. of the 2nd International Japan-Korea Symposium on Advanced Engineering & Science, Published 2000, Pages 161-168
Oscillation characteristics of a circular cylinder in a uniform Flow with intermittent touching to a close structure IUTAM Symposium on Bluff Body Wakes and Vortex-Induced Vibration, Published 2000,
Simulation of unsteady interaction of centrifugal impeller with its diffuser using advanced vortex method JSME International Journal series B[1340-8054], Published 2000, Volume 43, Issue 3, Pages 371-378
一様流中の円柱に誘起するin-line衝突振動現象について 日本機械学会流体工学部門講演会講演概要集, Published 2000, Pages 69
単独薄翼のスタール特性に関する数値解析 日本機械学会流体工学部門講演会講演概要集, Published 2000, Pages 246
新しい渦要素導入法に関する研究 日本数値流体力学会第１４回数値流体力学シンポジウム, Published 2000, Pages 203
最新渦法の注目すべき特性とラグランジュles法としての課題 日本数値流体力学会第１４回数値流体力学シンポジウム, Published 2000, Pages 65
渦法によるディフユーザポンプ非設計点の動静翼干渉の数値シミュレーション 日本数値流体力学会第１４回数値流体力学シンポジウム, Published 2000, Pages 205
Numerical simulation of the two-dimensional unsteady interaction of a centrifugal impeller with its volute casing by vortex method JSME Journal series B,[0387-5016], Published 1999, Volume 63, Issue 630, Pages 211-217
Simulation of the unsteady interaction of a centrifugal impeller with its diffuser by an advanced vortex method Proc. of the 3rd ASME/JSME Joint Fluids Engineering Conference, Published 1999,
Unsteady interaction of a centrifugal impeller with its diffuser by an advanced vortex method Proc. of the First International Conference on Vortex Methods, Published 1999,
Applicability of an advanced vortex method to unsteady flow analysis in fluid machinery Proc. of 3rd. International Conference on Pumps and Fans, Published 1998, Pages 559-569
Computation of unsteady viscous flow through centrifugal impeller rotating in volute casing by direct vortex method Computational Fluid Dynamics JOURNAL[0918-6654], Published 1998, Volume 7, Issue 3, Pages 313-323
Direct simulation of unsteady flow through a centrifugal pump impeller using fast vortex method Computational Fluid Dynamics JOURNAL[0918-6655], Published 1998, Volume 7, Issue 1, Pages 15-25
Numerical simulation of the unsteady interaction of a centrifugal impeller with its volute casing Proc. of 19th IAHR Symposium on Hydraulic Machinery and Cavitation, Published 1998, Pages 749-760
Simulation of the unsteady interaction of a centrifugal impeller with its volute casing vortex method Proc. of FEDSM’98, 1998 ASME Fluids Division Summer Meeting, Published 1998,
水泵水轮机全特性的新表达方式及复合工况计算 清华大学学报(自然科学版)[1000-0054], Published 1996, Issue 7,
A new presentation of the characteristics of pump-turbine and calculation of transient of complex operating conditions Proc. of 17th IAHR Symposium on Hydraulic Machinery and Cavitation, Published 1994, Pages 1487-1497
A new grid adaptive strategy combined characterized based split method Acta Mechanica Sinica[0459-1879], Volume 41, Issue 5, Pages 666-70
京公网安备 11010802027423号