当前位置: X-MOL首页全球导师 国内导师 › 曹树良

个人简介

教育背景 1982.09-1984.10 清华大学水利系河流海岸动力学专业 硕士 1989.10-1993.03 日本东北大学工学部机械工学专业 博士 工作履历 1984.11-1987.12 清华大学水电系 助教 1988.01-1989.10 清华大学水电系 助理研究员 1993.04-1994.04 日本国东北大学工学部 文部教官 1994.05-1998.07 清华大学水电系 教研室副主任,副教授 1998.08-1999.02 清华大学水电系 教研室副主任,教授 1999.03-2007.09 清华大学热能系 教授、博导,流体机械研究所所长 2007.09- 2011.09 清华大学热能系 教授、博导,系学术委员会主任 2008至今 水沙科学与水利水电工程国家重点实验室副主任 2011.09至今 清华大学热能系 教授、博导,系学位委员会副主席 学术兼职 2001至今 中国机械工程学会流体工程学会常务理事、副理事长 2001至今 中国电机工程学会水电设备专业委员会 副主任委员 2002至今 中国农业机械学会排灌机械学会 副理事长 2002至今 中国机械工程学会流体工程学会泵专业委员会主任委员 2002至今 《排灌机械》杂志编委会 副主任 2003至今 《江苏大学学报》(自然科学版)编委会 特邀编委 奖励与荣誉 混流式水轮机转轮设计与特性预测研究,国家科技进步二等奖,第一获奖人,1999年 混流式水轮机转轮设计与特性预测研究,北京市科技进步二等奖,第一获奖人,1998年 水力机械粘性流动计算,北京市科技进步三等奖,第二获奖人,1998年 混流式水轮机转轮计算机设计研究,国家教委科技进步三等奖,第二获奖人,1992年

研究领域

流体机械的水力设计及优化研究 流体机械流动理论及流动控制研究 水轮机和水泵的节能与环保技术研究 大型水轮机和水泵机组噪声与振动机理及控制研究 叶轮机械内部气液多相流机理研究

流体机械内部流动机理,流体机械的水力设计及优化设计理论,流体机械节能与环保技术

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Performance Prediction and Geometry Optimization for Application of Pump as Turbine: A Review  FRONTIERS IN ENERGY RESEARCH[2296-598X], Published 2022, Volume 9, Theoretical prediction model of gas-phase diameter in multiphase pump based on Weber number 基于韦伯数的气液混输泵气相直径 理论预测模型 Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2022, Volume 40, Issue 8, Pages 793-799 Design Method of Diffuser in Rotodynamic Multiphase Pump Based on Fourth-order Distribution of Velocity Moment 基于分段四次速度矩分布的叶片式气液混输泵导叶设计方法 Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2022, Volume 58, Issue 10, Pages 280-288 Optimization design method of multi-stage multiphase pump based on Oseen vortex Journal of Petroleum Science and Engineering[0920-4105], Published 2020, Volume 184, Method of dynamic mode decomposition and reconstruction with application to a three-stage multiphase pump ENERGY[0360-5442], Published 2020, Volume 208, Cavitation-Vortex-Turbulence Interaction and One-Dimensional Model Prediction of Pressure for Hydrofoil ALE15 by Large Eddy Simulation JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2019, Volume 141, Issue 2, Experimental Investigation on Transient Pressure Characteristics in a Helico-Axial Multiphase Pump  ENERGIES[1996-1073], Published 2019, Volume 12, Issue 3, Theoretical model of energy performance prediction and BEP determination for centrifugal pump as turbine  Energy[0360-5442], Published 2019, Volume 172, Pages 712-732 Dynamic mode decomposition of cavitating flow around ALE 15 hydrofoil Renewable Energy[0960-1481], Published 2019, Volume 139, Pages 214-227 Dynamic mode decomposition of gas-liquid flow in a rotodynamic multiphase pump RENEWABLE ENERGY[0960-1481], Published 2019, Volume 139, Pages 1159-1175 Influence of prewhirl angle on a centrifugal pump with inlet guide vane running at turbine mode IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 3, Investigation of internal flow pattern of a multiphase axial pump IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 6, Multiphase performance and internal flow pattern of helico-axial pumps IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 3, The transient characteristics of cloud cavitating flow over a flexible hydrofoil INTERNATIONAL JOURNAL OF MULTIPHASE FLOW[0301-9322], Published 2018, Volume 99, Pages 162-173 Controllable velocity moment and prediction model for inlet guide vanes of a centrifugal pump ENGINEERING COMPUTATIONS[0264-4401], Published 2018, Volume 35, Issue 3, Pages 1364-1382 Design Method of Controllable Blade Angle and Orthogonal Optimization of Pressure Rise for a Multiphase Pump  ENERGIES[1996-1073], Published 2018, Volume 11, Issue 5, Pressure fluctuation and flow pattern of a mixed-flow pump under design and off-design conditions PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2018, Volume 232, Issue 13, Pages 2430-2440 Influence of Geometry of Inlet Guide Vanes on Pressure Fluctuations of a Centrifugal Pump JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2018, Volume 140, Issue 9, Large eddy simulation of cavitation vortex interaction and pressure fluctuation around hydrofoil ALE 15 OCEAN ENGINEERING[0029-8018], Published 2018, Volume 163, Pages 264-274 Measurement and prediction of cavitating flow-induced vibrations JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2018, Volume 30, Issue 6, Pages 1064-1071 A review of prewhirl regulation by inlet guide vanes for compressor and pump Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy[0957-6509], Published 2018, Volume 233, Issue 6, Pages 803-817 Numerical investigation of initial stage of bubble rise IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2018, Volume 163, Issue 1, Numerical investigation of the transient cavitating flow and vortical patterns around a hydrofoil IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2018, Volume 163, Issue 1, Numerical modelling of unsteady cavitation and induced noise around a marine propeller Ocean Engineering[0029-8018], Published 2018, Volume 160, Pages 143-155 Pressure fluctuation and flow pattern of a mixed-flow pump with different blade tip clearances under cavitation condition  ADVANCES IN MECHANICAL ENGINEERING[1687-8140], Published 2017, Volume 9, Issue 4, Pages 1-12 Role of blade rotational angle on energy performance and pressure fluctuation of a mixed-flow pump PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2017, Volume 231, Issue 3, Pages 227-238 Multiparameter and multiobjective optimization design of centrifugal pump based on orthogonal method PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2017, Volume 231, Issue 14, Pages 2569-2579 Fluid structure interaction analysis of a hydrofoil based on fully coupled algorithm Chuan Bo Li Xue/Journal of Ship Mechanics[1007-7294], Published 2017, Volume 21, Issue 7, Pages 804-813 低比转数混流泵导叶内部压力脉动特性研究 农业机械学报[1000-1298], Published 2016, Issue 06, Pages 42-46 Numerical simulation and analysis of cavitation flows in a double suction centrifugal pump  INTERNATIONAL SYMPOSIUM OF CAVITATION AND MULTIPHASE FLOW (ISCM 2014), PTS 1-6[1757-8981], Published 2015, Volume 72, Experiment and numerical simulation of cavitation performance on a pressure-regulating valve with different openings  INTERNATIONAL SYMPOSIUM OF CAVITATION AND MULTIPHASE FLOW (ISCM 2014), PTS 1-6[1757-8981], Published 2015, Volume 72, Cavitation performance and flow characteristic in a centrifugal pump with inlet guide vanes  INTERNATIONAL SYMPOSIUM OF CAVITATION AND MULTIPHASE FLOW (ISCM 2014), PTS 1-6[1757-8981], Published 2015, Volume 72, Influence of blade angle distribution along leading edge on cavitation performance of a centrifugal pump  INTERNATIONAL SYMPOSIUM OF CAVITATION AND MULTIPHASE FLOW (ISCM 2014), PTS 1-6[1757-8981], Published 2015, Volume 72, Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition ENGINEERING COMPUTATIONS[0264-4401], Published 2015, Volume 32, Issue 6, Pages 1549-1566 Interphase force analysis for air-water bubbly flow in a multiphase rotodynamic pump  ENGINEERING COMPUTATIONS[0264-4401], Published 2015, Volume 32, Issue 7, Pages 2166-2180 Numerical Investigation on Frequency Jump of Flow Over a Cavity Using Large Eddy Simulation JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2015, Volume 137, Issue 8, Optimization design of a reversible pump-turbine runner with high efficiency and stability RENEWABLE ENERGY[0960-1481], Published 2015, Volume 81, Pages 366-376 Numerical investigation of influence of inlet guide vanes on unsteady flow in a centrifugal pump PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2015, Volume 229, Issue 18, Pages 3405-3416 Characteristics of transient flow and pressure fluctuation in impeller for centrifugal pump Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2014, Volume 50, Issue 10, Pages 163-169 Corrigendum to Three-dimensional vortex simulation of unsteady flow in hydraulic turbines [Int. J. Numer. Meth. Fluids, 69 (2012) 1679-1700] DOI: 10.1002/fld.2659 International Journal for Numerical Methods in Fluids[0271-2091], Published 2014, Volume 74, Issue 2, Pages 152 Effect of Virtual Mass Force on the Mixed Transport Process in a Multiphase Rotodynamic Pump ADVANCES IN MECHANICAL ENGINEERING[1687-8132], Published 2014, Pages - Effects of blade rotation angle deviations on mixed-flow pump hydraulic performance SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2014, Volume 57, Issue 7, Pages 1372-1382 Effects of Tangential Velocity Distribution on Flow Stability in a Draft Tube JOURNAL OF THERMAL SCIENCE[1003-2169], Published 2014, Volume 23, Issue 5, Pages 446-453 Experimental study of the influence of flow passage subtle variation on Mixed-flow pump performance CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2014, Volume 27, Issue 3, Pages 615-621 Influence of Blade Wrap Angle on Centrifugal Pump Performance by Numerical and Experimental Study CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2014, Volume 27, Issue 1, Pages 171-177 Influence of Prewhirl Regulation by Inlet Guide Vanes on Cavitation Performance of a Centrifugal Pump  ENERGIES[1996-1073], Published 2014, Volume 7, Issue 2, Pages 1050-1065 Optimal design of reversible pump-turbine runner Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering[1002-6819], Published 2014, Volume 30, Issue 13, Pages 78-85 Parametrization of blade leading and trailing edge positions and its influence on mixed- flow pump performance PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2014, Volume 228, Issue 4, Pages 703-714 Three-dimensional vortex simulation of unsteady flow in hydraulic turbines (vol 69, 1679, 2012) INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS[0271-2091], Published 2014, Volume 74, Issue 2, Pages 152-152 Three-dimensional vortex simulation of unsteady flow in hydraulic turbines.(Report) International Journal for Numerical Methods in Fluids[0271-2091], Published 2014, Volume 74, Issue 2, Turbulent flow simulation using large eddy simulation combined with characteristic-based split scheme COMPUTERS & FLUIDS[0045-7930], Published 2014, Volume 94, Pages 161-172 Application of two-fluid model in the unsteady flow simulation for a multiphase rotodynamic pump  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Pages - Cavitation flow simulation for a centrifugal pump at a low flow rate  CHINESE SCIENCE BULLETIN[1001-6538], Published 2013, Volume 58, Issue 8, Pages 949-952 Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellers CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2013, Volume 26, Issue 3, Pages 469-475 Experimental study of the effect of blade tip clearance and blade angle error on the performance of mixed-flow pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2013, Volume 56, Issue 2, Pages 293-298 Full 3-D viscous optimization design of a reversible pump turbine runner  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Pages - Influence of turbulence model on performance prediction of mixed-flow pump Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery[1000-1298], Published 2013, Volume 44, Issue 11, Pages 42-47 Iteration design of direct and inverse problems and flow analysis of mixed-flow pump impellers Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2013, Volume 53, Issue 2, Pages 179-183 Numerical investigation on pressure fluctuations in centrifugal compressor with different inlet guide vanes pre-whirl angles  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Pages - Optimal twist and chord of the blades of horizontal axis wind turbine Taiyangneng Xuebao/Acta Energiae Solaris Sinica[0254-0096], Published 2013, Volume 34, Issue 1, Pages 1-6 Three-dimensional design method for mixed-flow pump blades with controllable blade wrap angle PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2013, Volume 227, Issue 5, Pages 567-584 叶片式混输泵非定常流动的数值模拟 排灌机械工程学报[1674-8530], Published 2013, Issue 4, 小波变换应用于水轮机空化信号检测 水力发电学报[1003-1243], Published 2013, Issue 4, 水平轴风力机叶片扭角和弦长的理想分布 太阳能学报[0254-0096], Published 2013, Issue 1, 液体射流泵内部流动分析:ⅱ理论计算参数确定 排灌机械工程学报[1674-8530], Published 2013, Issue 1, 混流泵叶轮的正反问题迭代法设计及流动分析 清华大学学报(自然科学版)[1000-0054], Published 2013, Issue 2, 混流泵叶轮设计关键参数分析 水力发电学报[1003-1243], Published 2013, Issue 3, 湍流模型对混流泵性能预测的影响 农业机械学报[1000-1298], Published 2013, Issue 11, Analysis of flow in liquid jet pump-Part I: Experiment and three-dimension numerical simulation Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2012, Volume 30, Issue 6, Pages 656-659 Cavitation model with non-condensable gas effect and its numerical simulation Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2012, Volume 30, Issue 1, Pages 1-5 Comparison of interpolation functions in control volume finite element method and numerical analysis Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2012, Volume 43, Issue 7, Pages 79-84 Direct and inverse iterative design method for centrifugal pump impellers PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2012, Volume 226, Issue A6, Pages 764-775 Effects of diffuser vane on mixed-flow pumps performance Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2012, Volume 30, Issue 2, Pages 125-130 Influence of axial distance on pre-whirl regulation by the inlet guide vanes for a centrifugal pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2012, Volume 55, Issue 4, Pages 1037-1043 Numerical calculations for internal flow field in centrifugal pump impeller Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering[1002-6819], Published 2012, Volume 28, Issue 14, Pages 47-51 Numerical simulation of cavitation for 3-D ALE15 hydrofoil Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2012, Volume 43, Issue 9, Pages 49-52+48 Numerical simulation of cavitation in a centrifugal pump at low flow rate CHINESE PHYSICS LETTERS[0256-307X], Published 2012, Volume 29, Issue 1, Pages - Parameterization of velocity moment distribution and its effects on performance of mixed-flow pump Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering[1002-6819], Published 2012, Volume 28, Issue 13, Pages 100-105 Prediction method of impeller performance and analysis of loss mechanism for mixed-flow pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2012, Volume 55, Issue 7, Pages 1988-1998 Rotational deformability of Temperature Analogy Method Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2012, Volume 30, Issue 4, Pages 447-451+468 Stress analysis of Francis turbine runner based on fluid-structure coupling Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2012, Volume 31, Issue 4, Pages 216-220+250 There dimensional vortex method simulation of unsteady flow in hydraulic turbine Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics[0459-1879], Published 2012, Volume 44, Issue 3, Pages 519-527 Three-dimensional vortex simulation of unsteady flow in hydraulic turbines INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS[0271-2091], Published 2012, Volume 69, Issue 10, Pages 1679-1700 三维ale15翼型空化流动数值模拟 农业机械学报[1000-1298], Published 2012, Issue 9, 基于流固耦合的混流式水轮机转轮应力特性分析 水力发电学报[1003-1243], Published 2012, Issue 4, 基准温度分布动网格生成方法的研究及应用 北京理工大学学报[1001-0645], Published 2012, Issue 9, 复合隐式时间积分格式的非线性问题仿真研究 计算机仿真[1006-9348], Published 2012, Issue 11, 微遗传算法及其在混流泵叶轮优化设计中的应用 机械设计与制造[1001-3997], Published 2012, Issue 9, 控制体有限元中插值函数特性比较与算例分析 农业机械学报[1000-1298], Published 2012, Issue 7, 水力机械非定常流动的三维涡方法计算 力学学报[0459-1879], Published 2012, Issue 3, 液体射流泵内部流动分析:ⅰ试验与三维数值模拟 排灌机械工程学报[1674-8530], Published 2012, Issue 6, 混流泵导叶对其性能的影响 排灌机械工程学报[1674-8530], Published 2012, Issue 2, 温度体动网格方法的旋转变形能力 排灌机械工程学报[1674-8530], Published 2012, Issue 4, 离心泵叶轮内部流场的数值计算 农业工程学报[1002-6819], Published 2012, Issue 14, 考虑不可凝结气体的空化流模型及数值模拟 排灌机械工程学报[1674-8530], Published 2012, Issue 1, 速度矩分布规律的参数化描述及对混流泵性能的影响 农业工程学报[1002-6819], Published 2012, Issue 13, Effects of velocity moment distribution law on design of mixed-flow pump impeller Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2011, Volume 29, Issue 3, Pages 194-198 Iteration method of direct inverse problem of mixed-flow pump impeller design Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2011, Volume 29, Issue 4, Pages 277-281+302 Modeling and experiment of the hydraulic losses of centrifugal pump with inlet guide vanes Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 4, Pages 191-196 Numerical simulation of unsteady flows of fluid machinery using discrete vortex method Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 5, Pages 178-185 Numerical simulation of unsteady flows through a francis turbine runner using vortex methods ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 1751-1761 Optimal design of mixed-flow pump impeller based on direct inverse problem iteration and genetic algorithm ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 803-810 Power limit of horizontal axis wind turbine Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2011, Volume 47, Issue 10, Pages 113-118 前置导叶离心泵的损失建模及试验 水力发电学报[1003-1243], Published 2011, Issue 4, 基于正反问题迭代方法的离心泵叶轮设计及流场模拟 Published 2011, 平板大攻角绕流升力和阻力系数的计算 应用力学学报[1000-4939], Published 2011, Issue 5, 水平轴风力机的功率极限 机械工程学报[0577-6686], Published 2011, Issue 10, 流体机械非定常流动的涡方法数值模拟 水力发电学报[1003-1243], Published 2011, Issue 5, 混流泵叶轮设计正反问题迭代方法 排灌机械工程学报[1674-8530], Published 2011, Issue 4, 速度矩分布规律对混流泵叶轮设计的影响 排灌机械工程学报[1674-8530], Published 2011, Issue 3, Centrifugal pump impeller design by using direct inverse problem iteration Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2010, Volume 41, Issue 7, Pages 30-35+10 Design and experiment of inlet guide vane for centrifugal pump Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2010, Volume 41, Issue SUPPL. 1, Pages 1-5 Experiment and numerical simulation of cavitation performance for centrifugal pump with inlet guide vane Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2010, Volume 46, Issue 18, Pages 177-182 Hydraulic design and pre-whirl regulation law of inlet guide vane for centrifugal pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2010, Volume 53, Issue 8, Pages 2142-2151 Improvement on genetic algorithms and its application in fluid machinery Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2010, Volume 28, Issue 5, Pages 428-433 Numerical simulation of cavity flow around a hydrofoil Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2010, Volume 50, Issue 7, Pages 1058-1062 Optimal design and numerical simulation for impeller of centrifugal pump with medium-high specific speed Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2010, Volume 28, Issue 4, Pages 282-285+290 Parameter control in temperature analogy method Jisuan Wuli/Chinese Journal of Computational Physics[1001-246X], Published 2010, Volume 27, Issue 3, Pages 396-406 Vibration of thin cambered blade based on temperature analogy Jixie Gongcheng Xuebao/Journal of Mechanical Engineering[0577-6686], Published 2010, Volume 46, Issue 10, Pages 170-175 中比转速离心泵叶轮的优化设计及数值模拟 排灌机械工程学报[1674-8530], Published 2010, Issue 4, 基于温度体动网格方法的微弯薄翼振动问题 机械工程学报[0577-6686], Published 2010, Issue 10, 基于温度体模型的动网格生成方法及在流固耦合振动中的应用 振动与冲击[1000-3835], Published 2010, Issue 4, 基于滤波器湍流模型的水翼空化数值模拟 江苏大学学报(自然科学版)[1671-7775], Published 2010, Issue 6, 基于特征线分离算法的大涡模拟 工程力学[1000-4750], Published 2010, Issue 2, 带有前置导叶离心泵空化性能的试验及数值模拟 机械工程学报[0577-6686], Published 2010, Issue 18, 温度体动网格模型中控制参数的研究 计算物理[1001-246X], Published 2010, Issue 3, 离心泵前置导叶设计与试验 农业机械学报[1000-1298], Published 2010, Issue S1, 离心泵叶轮正反问题迭代设计方法 农业机械学报[1000-1298], Published 2010, Issue 7, 绕水翼空化流动的数值模拟 清华大学学报(自然科学版)[1000-0054], Published 2010, Issue 7, 遗传算法的改进及其在流体机械领域的应用 排灌机械工程学报[1674-8530], Published 2010, Issue 5, Delaunay triangulation for internal node generation in frontal approach and application Jisuan Wuli/Chinese Journal of Computational Physics[1001-246X], Published 2009, Volume 26, Issue 4, Pages 527-533 Effect of inflow angle on high Reynolds number flows in circular-sectioned 90 bends Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2009, Volume 49, Issue 12, Pages 1971-1975 Extended two-fluid model applied to analysis of bubbly flow in multiphase rotodynamic pump impeller Frontiers of Mechanical Engineering in China[1673-3479], Published 2009, Volume 4, Issue 1, Numerical simulation and experiment of inlet guide vane pre-whirl regulation for centrifugal pump Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2009, Volume 40, Issue 12, Pages 101-106 Numerical study on characteristics based on non-incremental split scheme Paiguan Jixie/Drainage and Irrigation Machinery[1005-6254], Published 2009, Volume 27, Issue 5, Pages 327-331 供暖系统混水离心泵叶轮正反问题计算 流体机械[1005-0329], Published 2009, Issue 7, 入流角对圆截面90°弯管内高雷诺数流动的影响 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2009, Issue 12, 前置导叶预旋调节离心泵性能的数值预测与试验 农业机械学报[1000-1298], Published 2009, Issue 12, 基于特征线方程N-S方程非增量型分离算法 排灌机械[1005-6254], Published 2009, Issue 5, 射流放水阀动态关闭过程研究 流体机械[1005-0329], Published 2009, Issue 12, 离心泵叶轮设计与流动分析 Published 2009, 结合前沿推进的delaunay三角化网格生成及应用 计算物理[1001-246X], Published 2009, Issue 4, 结合自适应网格的基于特征线方程的分离算法 力学学报[0459-1879], Published 2009, Issue 5, 轴流泵叶轮内部流场大涡模拟及分析 流体机械[1005-0329], Published 2009, Issue 11, Design of volute suction with a bell-like inlet passage in a mixed-flow pump Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 11, Pages 1949-1952 Flow computations for the design of high specific speed mixed-flow pumps Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 2, Pages 219-223 Numerical simulation of unsteady flows past a delta wing using a 3-D vortex method Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 2, Pages 256-259+263 Research on the guide vane design of high specific speed mixed-flow pump Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2008, Volume 39, Issue 2, Pages 73-76 三角翼周围非定常流动的三维涡方法数值模拟 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2008, Issue 2, 基于smac方法的90°弯管内部流场数值模拟 江苏大学学报(自然科学版)[1671-7775], Published 2008, Issue 6, 用于高比转速混流泵设计的流场计算 清华大学学报(自然科学版)[1000-0054], Published 2008, Issue 2, 离心泵前置导叶预旋调节的理论分析 水泵技术[1002-7424], Published 2008, Issue 6, 钟形进水流道吸水室的后壁距研究 流体机械[1005-0329], Published 2008, Issue 3, 钟形进水流道蜗形吸水室的设计方法 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2008, Issue 11, 高比转数混流泵导叶设计计算 农业机械学报[1000-1298], Published 2008, Issue 2, Computer aided design and flow analysis of high specific speed mixed-flow pump impeller Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2007, Volume 47, Issue 9, Pages 1435-1438 Numerical simulation of vortex shedding and lock-in characteristics for a thin cambered blade Journal of Fluids Engineering, Transactions of the ASME[0098-2202], Published 2007, Volume 129, Issue 10, Pages 1297-1305 Numerical simulation of vortex shedding and lock-in characteristics for a thin cambered blade.(Technical report) Journal of Fluids Engineering[0098-2202], Published 2007, Volume 129, Issue 10, 二维非定常有涡流动的数值模拟方法 清华大学学报(自然科学版)[1000-0054], Published 2007, Issue 2, 叶片式混输泵内气液两相流的数值计算 工程热物理学报[0253-231X], Published 2007, Issue 1, 叶片泵内气液两相流的三维流动数值模型 北京理工大学学报[1001-0645], Published 2007, Issue 12, 钟形进水流道吸水室后壁的优化设计 江苏大学学报(自然科学版)[1671-7775], Published 2007, Issue 3, 高比转速混流泵叶轮正反问题计算 清华大学学报(自然科学版)[1000-0054], Published 2007, Issue 9, Large eddy simulation of the flow through the spiral casing of a centrifugal pump Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery[1000-1298], Published 2006, Volume 37, Issue 7, Pages 62-65 Non-uniform difussion vane assembly in chemical axial pump Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering[0577-6686], Published 2006, Volume 42, Issue 9, Pages 112-116 化工轴流泵的非均匀导叶布置 机械工程学报[0577-6686], Published 2006, Issue 9, 叶片表面旋涡脱落诱发自激振动的可能性 机械工程学报[0577-6686], Published 2006, Issue 1, 离心泵螺旋形压水室内流场的大涡模拟 农业机械学报[1000-1298], Published 2006, Issue 7, 运用正反问题迭代法进行叶片式气液混输泵叶轮的水力设计 机械工程学报[0577-6686], Published 2006, Issue 4, Hydrodynamic design of rotodynamic pump impeller for multiphase pumping by combined approach of inverse design and CFD analysis.(Author Abstract) Journal of Fluids Engineering[0098-2202], Published 2005, Volume 127, Issue 2, 叶栅内非定常不可压流动的数值模拟 工程力学[1000-4750], Published 2005, Issue 6, 求解不可压三维湍流的隐式smac方法 清华大学学报(自然科学版)[1000-0054], Published 2005, Issue 11, 高比转速混流泵叶轮设计方法 江苏大学学报(自然科学版)[1671-7775], Published 2005, Issue 3, Implicit smac scheme for the incompressible Navier-Stokes equations Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2004, Volume 44, Issue 2, Pages 270-273 低比转数离心泵叶轮出口紊流流动结构分析 农业机械学报[1000-1298], Published 2004, Issue 1, 喷水推进器斜流泵级的性能预测研究 流体机械[1005-0329], Published 2004, Issue 9, 斜流式喷水推进器内部三维紊流流动的数值模拟与性能分析 北京理工大学学报[1001-0645], Published 2004, Issue 8, 离心泵压水室内部流动数值模拟 江苏大学学报(自然科学版)[1671-7775], Published 2004, Issue 3, 解不可压缩流动N-S方程的隐式SMAC方法 清华大学学报(自然科学版)[1000-0054], Published 2004, Issue 2, 非定常粘性空化流动模型及其数值计算 工程热物理学报[0253-231X], Published 2004, Issue 5, Optimum design on concrete casing with numerical method Proceedings of the ASME Fluids Engineering Division Summer Meeting, Published 2003, Volume 2, Pages 63-67 绕水翼超空化现象的实验研究 工程热物理学报[0253-231X], Published 2003, Issue 4, 遗传算法在并联水泵系统运行优化中的应用 流体机械[1005-0329], Published 2003, Issue 10, Design optimization of axial flow hydraulic turbine runner: Part II-multi-objective constrained optimization method International Journal for Numerical Methods in Fluids[0271-2091], Published 2002, Volume 39, Issue 6, Pages 533-548 对旋轴流式叶轮机械的研究进展 水力发电学报[1003-1243], Published 2002, Issue S1, 离心泵叶轮进口边位置的研究 水泵技术[1002-7424], Published 2002, Issue 6, 高速水流中旋涡空化所引起的空蚀和振动 工程热物理学报[0253-231X], Published 2002, Issue 6, Vortex cavitation mechanisms in shear layer flow Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2001, Volume 41, Issue 10, Pages 62-64+89 剪切层区域旋涡空化的发生机理 清华大学学报(自然科学版)[1000-0054], Published 2001, Issue 10, 应用隐式smac格式计算射流放水阀内部非定常不可压粘性流场 工程热物理学报[0253-231X], Published 2001, Issue 1, 旋转机械紊流数值模拟中的周期边界条件处理 Published 2001, 水泵水轮机转轮内部三维紊流流场计算与性能分析 水利水电技术[1000-0860], Published 2001, Issue 5, 通气对空化引起振动的影响 水力发电学报[1003-1243], Published 2001, Issue 2, 通气对空蚀的影响及高速摄影观察 水力发电学报[1003-1243], Published 2001, Issue 1, CFD analysis and optimum design of hydro turbine runner Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2000, Volume 21, Issue 3, Pages 316-320 水力机械转轮内的cfd分析及优化设计 工程热物理学报[11-2091/O4], Published 2000, Issue 3, Large eddy simulation of silt-laden two-phase flow through a hydraulic turbine runner Proceedings of the 1st International Conference on Engineering Thermophysics (ICET '99), Published 1999, Pages 659-665 Numerical simulation and abrasion prediction of two-phase turbulent flows through hydraulic turbine guide vanes Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 1999, Volume 20, Issue 5, Pages 584-588 Numerical simulation on silt abrasion in a hydraulic turbine runner Dadianji Jishu/Large Electric Machine and Hydraulic Turbine[1000-3983], Published 1999, Issue 5, Pages 54-58 水轮机活动导叶内部三维固液两相紊流计算及磨损预估 工程热物理学报[0253-231X], Published 1999, Issue 5,

推荐链接
down
wechat
bug