近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
基于神经网络的燃气轮机控制和建模技术综述 热力透平[1672-5549], Published 2022, Volume 51, Issue 3, Pages 155-160+169
基于神经网络的重型燃气轮机启动过程建模研究 热力透平[1672-5549], Published 2020, Issue 03, Pages 169-174+185
基于数据的燃气轮机建模与控制技术概述 热力透平[1672-5549], Published 2019, Issue 02, Pages 89-95
基于数据的重型燃气轮机建模研究 热力透平[1672-5549], Published 2018, Issue 01, Pages 1-5+15
某燃气轮机控制系统改造调试研究 热力透平[1672-5549], Published 2017, Issue 04, Pages 279-283+287
基于数据和神经网络的压气机性能预测研究 热力透平[1672-5549], Published 2017, Issue 03, Pages 158-163
航空发动机全局快速滑模控制趋近律优化研究 燃气轮机技术[1009-2889], Published 2015, Volume 28, Issue 1, Pages 1-6
航空发动机多变量滑模控制趋近律优化研究 热力透平[1672-5549], Published 2015, Volume 44, Issue 1, Pages 30-34
Adaptive gas path diagnostics using strong tracking filter PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING[0954-4100], Published 2014, Volume 228, Issue 4, Pages 577-585
基于滤波方法的航空发动机故障诊断研究 热力透平[1672-5549], Published 2014, Volume 43, Issue 2, Pages 118-123
Sparse bayesian learning for gas path diagnostics JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME[0742-4795], Published 2013, Volume 135, Issue 7, Pages -
基于多输出lssvm的压气机特性的拟合和预测研究 热力透平[1672-5549], Published 2013, Issue 2,
重型燃气轮机控制发展趋势及未来关键技术 热力透平[1672-5549], Published 2013, Volume 42, Issue 4, Pages 217-224
A modified analytical model to calculate temperature distribution of gas turbine blade and the cooling air required Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering[0258-8013], Published 2012, Volume 32, Issue 14, Pages 88-94
A novel degree of observability used for measurement selections in gas path diagnostics JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME[0742-4795], Published 2012, Volume 134, Issue 8, Pages -
States observable degree analysis of a heavy-duty gas turbine and its application in fault diagnosis Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering[0258-8013], Published 2012, Volume 32, Issue 2, Pages 117-122
一种计算燃气轮机透平叶片温度分布和冷却空气需求量的修正的解析模型 中国电机工程学报[0258-8013], Published 2012, Issue 14,
一种重型燃气轮机通用模型的建立 热力透平[1672-5549], Published 2012, Issue 1,
冷却对燃气透平的熵增及透平效率影响的研究 热力透平[1672-5549], Published 2012, Issue 2,
基于lmi的航空发动机状态反馈最优控制 燃气轮机技术[1009-2889], Published 2012, Issue 3,
基于simulink的单轴重型燃气轮机启动过程仿真研究 燃气轮机技术[1009-2889], Published 2012, Issue 1,
重型燃气轮机状态能观度分析及其在故障诊断中的应用 中国电机工程学报[0258-8013], Published 2012, Issue 2,
Observable degree analysis of heavy-duty gas turbine based on SVD method 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011 - Proceedings, Published 2011, Pages 6646-6649
基于simulink的ge9fa重型燃机启动过程仿真研究 热力透平[1672-5549], Published 2011, Issue 2,
应用遗传算法优化设计管壳式换热器 热力透平[1672-5549], Published 2011, Issue 2,
重型燃气轮机分段线性化状态空间模型的建立 热力透平[1672-5549], Published 2010, Issue 4,
单轴联合循环发电机组的燃气轮机功率监测 热力透平[1672-5549], Published 2009, Issue 1,
国家标准《航空派生型燃气轮机成套设备的噪声值及测量》(GB/T10491)修订宣贯 燃气轮机技术[1009-2889], Published 2009, Issue 4,
基于ann和遗传算法的联合循环电厂机组负荷经济分配 热力透平[1672-5549], Published 2009, Issue 1,
基于simulink的单轴重型燃气轮机模型动态仿真研究 热力透平[1672-5549], Published 2009, Issue 4,
基于simulnk的单轴重型燃气轮机建模与仿真研究 燃气轮机技术[1009-2889], Published 2009, Issue 3,
单轴联合循环机组的变工况性能分析 燃气轮机技术[1009-2889], Published 2008, Issue 4,
基于人工神经网络的单轴联合循环机组变工况模拟 燃气轮机技术[1009-2889], Published 2008, Issue 1,
燃气―蒸气联合循环的神经网络变工况模拟 燃气轮机技术[1009-2889], Published 2006, Issue 4,
燃气轮机简单循环的一次调频控制仿真研究 热力透平[1672-5549], Published 2006, Issue 1,
改进的winsock实现压气站仿真培训器内的通讯 计算机仿真[1006-9348], Published 2005, Issue 6,
燃-蒸联合循环机组模块匹配分析软件设计 计算机仿真[1006-9348], Published 2005, Issue 8,
燃气轮机及联合循环一次调频控制综述 热力透平[1671-0851], Published 2004, Issue 3,
Igcc电站空分系统精馏塔的分段简化模型 燃气轮机技术[1009-2889], Published 2003, Issue 2,
上位机系统中vc、matlab和labview程序间的串行通讯 化工自动化及仪表[1000-3932], Published 2003, Issue 6,
循环流化床控制策略研究 燃气轮机技术[1009-2889], Published 2003, Issue 3,
长距离输气管线压气站负荷优化调度 燃气轮机技术[1009-2889], Published 2003, Issue 3,
Igcc电站中气化炉控制系统研究 热能动力工程[1001-2060], Published 2002, Issue 6,
System identification in IGCC dynamic models Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2002, Volume 42, Issue 8, Pages 1113-1116
天然气增压站模拟培训器设计 燃气轮机技术[1009-2889], Published 2002, Issue 4,
天然气增压站配套与选型研究 燃气轮机技术[1009-2889], Published 2002, Issue 1,
燃气轮机仿真培训器故障模块研究 计算机仿真[1006-9348], Published 2002, Issue 6,
系统辨识方法在igcc电站模型中的应用 清华大学学报(自然科学版)[1000-0054], Published 2002, Issue 8,
联合循环在输气增压站中应用的研究 燃气轮机技术[1009-2889], Published 2002, Issue 3,
面向对象的燃气轮机电站仿真培训器的设计 燃气轮机技术[1009-2889], Published 2002, Issue 1,
Igcc气化站的动态建模 燃气轮机技术[1009-2889], Published 2001, Issue 2,
Igcc电站空分系统精馏塔的建模 燃气轮机技术[1009-2889], Published 2001, Issue 4,
Puertollano IGCC电站控制系统介绍 燃气轮机技术[1009-2889], Published 2001, Issue 3,
从markⅰ到markⅵ至后markⅵ――兼谈燃气轮机的控制技术发展 燃气轮机技术[1009-2889], Published 2001, Issue 1,
对叶片动频系数经验公式的评价 汽轮机技术[1001-5884], Published 2001, Issue 1,
有差调节系统燃气轮机在Matlab/Simulink中的实现 动力工程[1000-6761], Published 2001, Issue 6,
机械驱动用单轴燃气轮机动态模型研究 热能动力工程[1001-2060], Published 2001, Issue 3,
计算机代数在热动力系统建模与仿真中的应用 动力工程[1000-6761], Published 2001, Issue 5,
Fuzzy control in gas turbine power plants Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2000, Volume 40, Issue 11, Pages 30-34
Igcc协调控制系统的研究初步 燃气轮机技术[32-1393/TK], Published 2000, Issue 3,
发电用单轴燃气轮机的模糊控制 清华大学学报(自然科学版)[1000-0054], Published 2000, Issue 11,
燃气轮机转速模糊控制系统在simulink中的实现 燃气轮机技术[1009-2889], Published 1999, Issue 4,
串级控制系统在燃机电站控制系统中的应用 清华大学学报(自然科学版)[1000-0054], Published 1997, Issue S1,
燃气/蒸汽联合循环电站模拟培训系统的设计与实现 计算机仿真[1006-9348], Published 1997, Issue 4,
燃气/蒸汽轮机联合发电机组模拟培训器研制 燃气轮机技术, Published 1996, Issue 4,
MS6001燃气轮机的MARK Ⅳ控制系统模拟培训器 燃气轮机技术[1009-2889], Published 1993, Issue 3,