近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Numerical Investigation and Optimization of Variable Guide Vanes Adjustment in a Transonic Compressor ENERGIES[1996-1073], Published 2023, Volume 16, Issue 1,
加工误差对压气机叶栅气动性能的影响 装备环境工程[1672-9242], Published 2023, Volume 20, Issue 1, Pages 22-29
某1.5级压气机设计工况下的激励源分析 工程热物理学报[0253-231X], Published 2023, Volume 44, Issue 1, Pages 56-62
Experimental and numerical study on aerodynamic stability of compressor L-inlet duct Aerospace Science and Technology[1270-9638], Published 2023, Volume 139,
Integrated through-flow and CFD optimization design method of multi-stage compressors 多级压气机通流与CFD一体化优化设计方法 Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2022, Volume 62, Issue 4, Pages 774-784
Evaluation of the performance and economy for a hybrid energy storage system using hydrogen and compressed carbon dioxide as the energy carrier ENERGY CONVERSION AND MANAGEMENT[0196-8904], Published 2022, Volume 264,
Influence of Position of Intake Struts on Unsteady Load and Vibration of First-Stage Rotor MACHINES[2075-1702], Published 2022, Volume 10, Issue 11,
Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor ENERGIES[1996-1073], Published 2022, Volume 15, Issue 24,
Study on Distribution Law of Gas Phase and Cavitation in the Pressurization Unit of Helical Axial Flow Multiphase Pump Journal of Marine Science and Engineering[2077-1312], Published 2022, Volume 10, Issue 11,
Improvement of part-load performance of gas turbine by adjusting compressor inlet air temperature and IGV opening FRONTIERS IN ENERGY[2095-1701], Published 2021, Volume 16, Issue 6, Pages 1000-1016
三级跨音压气机设计工况气动性能分析 工程热物理学报[0253-231X], Published 2021, Issue 4, Pages 886-893
A new gaseous cavitation model in a tilting-pad journal bearing SCIENCE PROGRESS[0036-8504], Published 2021, Volume 104, Issue 3,
Thermodynamic and economic investigations of transcritical CO2-cycle systems with integrated radial-inflow turbine performance predictions Applied Thermal Engineering[1359-4311], Published 2020, Volume 165,
Thermodynamic and economic analysis of a supercritical carbon dioxide (S–CO2) recompression cycle with the radial-inflow turbine efficiency prediction Energy[0360-5442], Published 2020, Volume 191,
Shock-Stable Roe Scheme Combining Entropy Fix and Rotated Riemann Solver AIAA JOURNAL[0001-1452], Published 2020, Volume 58, Issue 2, Pages 779-786
Improvement design and analysis of a supercritical CO2/transcritical CO2 combined cycle for offshore gas turbine waste heat recovery ENERGY[0360-5442], Published 2020, Volume 210,
Definition of cycle based comprehensive efficiency of a cooled turbine ENERGY[0360-5442], Published 2019, Volume 168, Pages 601-608
Unsteadiness of Tip Leakage Flow in the Detached-Eddy Simulation on a Transonic Rotor with Vortex Breakdown Phenomenon ENERGIES[1996-1073], Published 2019, Volume 12, Issue 5,
Numerical investigation of static characteristic of a tilting-pad journal bearing using shear stress transport model and air backflow ADVANCES IN MECHANICAL ENGINEERING[1687-8132], Published 2019, Volume 11, Issue 4,
Numerical Investigation of Flow and Heat Transfer in a Rotor-Stator Cavity with Centripetal Carbon Dioxide Through-Flow ENERGIES[1996-1073], Published 2019, Volume 12, Issue 13,
Axial Thrust, Disk Frictional Losses, and Heat Transfer in a Gas Turbine Disk Cavity ENERGIES[1996-1073], Published 2019, Volume 12, Issue 15,
Investigation of the cavitation model in an inducer for water and liquid nitrogen PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2019, Volume 233, Issue 19-20, Pages 6939-6952
DES Investigations of Tip Leakage Flow in a Transonic Compressor Rotor Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2019, Volume 40, Issue 7, Pages 1491-1497
Numerical investigation for characteristics and oil–air distributions of oil film in a tilting-pad journal bearing Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology[1350-6501], Published 2019, Volume 234, Issue 2, Pages 193-204
Design and Analysis of S-CO 2 Cycle and Radial Turbine for SOFC Vehicle Waste-Heat Recovery Journal of Thermal Science[1003-2169], Published 2019, Volume 28, Issue 3, Pages 559-570
Experimental investigation on the flow and flow-rotor heat transfer in a rotor-stator spinning disk reactor APPLIED THERMAL ENGINEERING[1359-4311], Published 2019, Volume 162,
Parametric analysis on multi-stage high pressure reducing valve for hydrogen decompression International Journal of Hydrogen Energy[0360-3199], Published 2019, Volume 44, Issue 59, Pages 31263-31274
Three-dimensional optimal design of a cooled turbine considering the coolant-requirement change OPEN PHYSICS[2391-5471], Published 2019, Volume 17, Issue 1, Pages 768-778
跨音压气机机匣冷却流动控制方法研究 工程热物理学报[0253-231X], Published 2019, Issue 12, Pages 2797-2805
Performance analysis and parametric optimization of supercritical carbon dioxide (S-CO2) cycle with bottoming Organic Rankine Cycle (ORC) ENERGY[0360-5442], Published 2018, Volume 143, Pages 406-416
Aerodynamic design and numerical analysis of a radial inflow turbine for the supercritical carbon dioxide Brayton cycle APPLIED THERMAL ENGINEERING[1359-4311], Published 2018, Volume 132, Pages 245-255
Numerical Investigation of Air-Oil-Thermal Coupling Mechanism in Floating Ring Bearings JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME[0742-4787], Published 2018, Volume 140, Issue 3,
Cures for expansion shock and shock instability of Roe scheme based on momentum interpolation mechanism APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION[0253-4827], Published 2018, Volume 39, Issue 4, Pages 455-466
Performance improvement of a preheating supercritical CO2 (S-CO2) cycle based system for engine waste heat recovery ENERGY CONVERSION AND MANAGEMENT[0196-8904], Published 2018, Volume 161, Pages 225-233
One-dimensional model analysis and performance assessment of Tesla turbine APPLIED THERMAL ENGINEERING[1359-4311], Published 2018, Volume 134, Pages 546-554
Aero-thermal coupled through-flow method for cooled turbines with new cooling model Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy[0957-6509], Published 2018, Volume 232, Issue 3, Pages 254-265
Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing Advances in Tribology[1687-5915], Published 2018, Volume 2018,
Numerical investigation of subsynchronous vibration in floating ring bearings Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology[1350-6501], Published 2018, Volume 232, Issue 11, Pages 1390-1401
Investigation of Cooling Effect on the Aerodynamic Performance in the Intercooled Compressor JOURNAL OF PROPULSION AND POWER[0748-4658], Published 2018, Volume 34, Issue 4, Pages 920-932
Definition and comparison of mixed expansion efficiency for cooled turbine APPLIED THERMAL ENGINEERING[1359-4311], Published 2018, Volume 141, Pages 298-304
Analysis and Improvement of a Two-Stage Centrifugal Compressor Used in an MW-Level Gas Turbine APPLIED SCIENCES-BASEL[2076-3417], Published 2018, Volume 8, Issue 8,
Investigation of engine waste heat recovery using supercritical CO2 (S-CO2) cycle system Proceedings of the ASME Turbo Expo, Published 2018, Volume 9,
Application Analysis of Exhaust Gas Recirculation Technology in F-class Gas Turbines Dongli Gongcheng Xuebao/Journal of Chinese Society of Power Engineering[1674-7607], Published 2018, Volume 38, Issue 1, Pages 24-28
Friction power analysis and improvement for a tilting-pad journal bearing considering air entrainment Applied Thermal Engineering[1359-4311], Published 2018, Volume 145, Pages 763-771
Flow simulation of various riblet shapes and a uniform model for boundary layer Journal of Applied Fluid Mechanics[1735-3572], Published 2018, Volume 11, Issue 3, Pages 755-764
Performance estimation of Tesla turbine applied in small scale Organic Rankine Cycle (ORC) system APPLIED THERMAL ENGINEERING[1359-4311], Published 2017, Volume 110, Pages 318-326
An investigation of the conjugate heat transfer in an intercooled compressor vane based on a discontinuous Galerkin method APPLIED THERMAL ENGINEERING[1359-4311], Published 2017, Volume 114, Pages 85-97
Convective cooling model for aero-thermal coupled through-flow method PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2017, Volume 231, Issue 2, Pages 133-144
Role of the momentum interpolation mechanism of the Roe scheme in shock instability INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS[0271-2091], Published 2017, Volume 84, Issue 6, Pages 335-351
A thermodynamic-cycle performance analysis method and application on a three-shaft gas turbine Applied Thermal Engineering[1359-4311], Published 2017, Volume 127, Pages 465-472
Performance Analysis of Dual-loop Heat Recovery System Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2017, Volume 38, Issue 7, Pages 1491-1495
Numerical analysis of the drag reduction for turbulent pulsating pipe flows based on large eddy simulations Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2017, Volume 57, Issue 5, Pages 511-515
1-D model analysis of Tesla Turbine for small scale Organic Rankine Cycle (ORC) system Proceedings of the ASME Turbo Expo, Published 2017, Volume 3,
Effect of cooling on the aerodynamic performance in the intercooled compressor vanes Proceedings of the ASME Turbo Expo, Published 2017, Volume 5B-2017,
Parametric design and off-design analysis of organic Rankine cycle (ORC) system Energy Conversion and Management[0196-8904], Published 2016, Volume 112, Pages 157-165
Numerical optimization of a highly loaded compressor in semi‐closed cycles using neural networks and genetic algorithms Greenhouse Gases: Science and Technology[2152-3878], Published 2016, Volume 6, Issue 2, Pages 232-250
Numerical optimization for stator vane settings of multi-stage compressors based on neural networks and genetic algorithms Aerospace Science and Technology[1270-9638], Published 2016, Volume 52, Pages 81-94
Application of a discontinuous Galerkin method on the compressible flow in the transonic axial compressor APPLIED THERMAL ENGINEERING[1359-4311], Published 2016, Volume 93, Pages 707-717
Aerodynamic Analysis and Three-Dimensional Redesign of a Multi- Stage Axial Flow Compressor ENERGIES[1996-1073], Published 2016, Volume 9, Issue 4,
A numerical study on the tip clearance in an axial transonic compressor rotor APPLIED THERMAL ENGINEERING[1359-4311], Published 2016, Volume 103, Pages 282-290
Influence of the radial-inflow turbine efficiency prediction on the design and analysis of the Organic Rankine Cycle (ORC) system ENERGY CONVERSION AND MANAGEMENT[0196-8904], Published 2016, Volume 123, Pages 308-316
Thermoelastic Simulations Based on Discontinuous Galerkin Methods: Formulation and Application in Gas Turbines INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES[0334-0082], Published 2016, Volume 33, Issue 2, Pages 129-141
THERMODYNAMIC ANALYSIS OF ORGANIC RANKINE CYCLE (ORC) SYSTEMS BASED ON TURBINE PERFORMANCE PREDICTION PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 3, Published 2016,
Development and application of a thermodynamic-cycle performance analysis method of a three-shaft gas turbine ENERGY[0360-5442], Published 2016, Volume 112, Pages 307-321
CONJUGATE HEAT TRANSFER SIMULATION OF THE INTERCOOLED COMPRESSOR VANES BASED ON DISCONTINUOUS GALERKIN METHOD PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5A, Published 2016,
AN AERO-THERMAL COUPLED THROUGHFLOW METHOD FOR CONVECTIVE COOLED TURBINES PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2C, Published 2016,
THREE-DIMENSIONAL AERODYNAMIC OPTIMIZATION OF A MULTI-STAGE AXIAL COMPRESSOR PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2C, Published 2016,
A multi-dimensional high-order discontinuous galerkin method based on gas kinetic theory for viscous flow computations Journal of Computational Physics[0021-9991], Published 2015, Volume 292, Pages 176-193
A new optimization method for centrifugal compressors based on 1d calculations and analyses Energies[1996-1073], Published 2015, Volume 8, Issue 5, Pages 4317-4334
Aerodynamic analysis of a highly loaded compressor in semi-closed cycles using a throughflow method Greenhouse Gases: Science and Technology[2152-3878], Published 2015, Volume 5, Issue 5, Pages 545-557
Aerodynamic redesign of a 5-Stage axial compressor by Re-Stagger and bow Proceedings of the ASME Turbo Expo 2015[978-0-7918-5663-5], Published 2015,
Analysis of ORC (Organic Rankine Cycle) systems with pure hydrocarbons and mixtures of hydrocarbon and retardant for engine waste heat recovery Applied Thermal Engineering[1359-4311], Published 2015, Volume 89, Pages 693-702
Application of a Novel Gaseous Cavitation Model for Hydrodynamic Bearings in Both 2D Reynolds and 3D Navier-Stokes Equations Proceedings of the ASME Turbo Expo 2015[978-0-7918-5663-5], Published 2015,
Development and Application of a Throughflow Method for High-Loaded Axial Flow Compressors Science China Technological Sciences[1674-7321], Published 2015, Volume 59, Issue 1, Pages 93-108
Development and Validation of a Full-Range Performance Analysis Model for a Three-Spool Gas Turbine with Turbine Cooling Energy[0360-5442], Published 2015, Volume 89, Pages 545-557
Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer Journal of Engineering for Gas Turbines and Power – Transactions of the ASME[0742-4795], Published 2015, Volume 137, Issue 12,
Development of a Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors Proceedings of the ASME Turbo Expo 2015[978-0-7918-5663-5], Published 2015,
Development of an aero-thermal coupled through-flow method for cooled turbines SCIENCE CHINA Technological Sciences[1674-7321], Published 2015,
Discontinuous galerkin finite element methods for numerical simulations of thermoelasticity Journal of Thermal Stresses[0149-5739], Published 2015, Volume 38, Issue 9, Pages 983-1004
Experimental and Numerical Studies of Cavitation Effects in a Tapered Land Thrust Bearing JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME[0742-4787], Published 2015, Volume 137, Issue 1, Pages -
Investigations of film cooling and its non-uniform distribution for the conjugate heat transfer passage with a compound inclined angle jet Numerical Heat Transfer;Part A: Applications[1040-7782], Published 2015, Volume 69, Issue 1, Pages 14-30
Parametric analysis of a dual loop Organic Rankine Cycle (ORC) system for engine waste heat recovery Energy Conversion and Management[0196-8904], Published 2015, Volume 105, Pages 995-1005
Performance analysis of a dual-loop organic Rankine cycle (ORC) system with wet steam expansion for engine waste heat recovery Applied Energy[0306-2619], Published 2015, Volume 156, Pages 280-289
Thermodynamic analysis and performance optimization of an Organic Rankine Cycle (ORC) waste heat recovery system for marine diesel engines Energy[0360-5442], Published 2015, Volume 82, Pages 976-985
Through-flow calculation with a cooling model for cooled turbines Proceedings of the Institution of Mechanical Engineers Part A Journal of Power & Energy[0957-6509], Published 2015, Volume 1, Issue 14,
Applications of explicit algebraic Reynolds stress models to transonic turbulence flow simulations based on discontinuous Galerkin methods ASME Turbo Expo: Turbine Technical Conference and Exposition[978-0-7918-4561-5], Published 2014, Volume 2B,
Conjugated heat transfer analysis of a film cooling passage with different rib configurations International Journal of Numerical Methods for Heat & Fluid Flow[0961-5539], Published 2014, Volume 25, Issue 4, Pages 841-860
Effects of Curvature Continuity of Compressor Blade Profiles on Their Performances Proceedings of the ASME Turbo Expo[978-0-791-84560-8], Published 2014, Volume 2A,
Numerical and Theoretical Investigations Concerning the Continuous-Surface-Curvature Effect in Compressor Blades Energies[1996-1073], Published 2014, Volume 7, Issue 12, Pages 8150-8177
Numerical modeling for gaseous cavitation of oil film and non-equilibrium dissolution effects in thrust bearings TRIBOLOGY INTERNATIONAL[0301-679X], Published 2014, Volume 78, Pages 14-26
Performance prediction and analysis of a Three-Shaft Gas Turbine Supported by Turbine Cooling Model ASME Turbo Expo: Turbine Technical Conference and Exposition[978-0-7918-4565-3], Published 2014, Volume 3A,
The application of discontinuous Galerkin methods in conjugate heat transfer simulations of gas turbines Energies[1996-1073], Published 2014, Volume 7, Issue 12, Pages 7857-7877
Thermal design and performance optimization of the orc system for the waste heat recovery in refining petroleum industry ASME Turbo Expo: Turbine Technical Conference and Exposition[978-0-7918-4566-0], Published 2014, Volume 3B,
Thermodynamic analysis and performance optimization of an ORC (Organic Rankine Cycle) system for multi-strand waste heat sources in petroleum refining industry ENERGY[0360-5442], Published 2014, Volume 71, Pages 673-680
Through flow calculations for convective cooling turbines ASME Turbo Expo: Turbine Technical Conference and Exposition[978-0-7918-4561-5], Published 2014, Volume 2B,
太阳能中低温有机朗肯循环系统的设计与分析 工程热物理学报[0253-231X], Published 2014, Volume 35, Issue 7, Pages 1309-1312
An investigation of conjugate heat transfer simulations based on discontinuous Galerkin methods on unstructured grids Proceedings of the ASME Turbo Expo, Published 2013, Volume 3,
Conjugated heat transfer analysis of a film cooling passage with turbulator ribs Heat Transfer Research[1064-2285], Published 2013, Volume 47, Issue 2, Pages 89-103
Investigation of compressor tip clearance flow based on the discontinuous galerkin methods Proceedings of the ASME Turbo Expo, Published 2013, Volume 6 B,
Mechanism of Roe-type schemes for all-speed flows and its application COMPUTERS & FLUIDS[0045-7930], Published 2013, Volume 86, Pages 56-70
Performance calculation of a three-shaft gas turbine: Experiment evaluation and analysis Proceedings of the ASME Turbo Expo, Published 2013, Volume 2,
叶片前缘形状对压气机气动性能的影响 工程热物理学报[0253-231X], Published 2013, Issue 6,
基于gpu的隐式算法与方案研究 工程热物理学报[0253-231X], Published 2013, Issue 11,
基于间断有限元方法的紧致限制器研究 工程热物理学报[0253-231X], Published 2013, Issue 9,
有机工质向心透平气动设计与变工况性能预测 工程热物理学报[0253-231X], Published 2013, Issue 1,
某三轴mw级燃气轮机热力循环计算的建模及验证 工程热物理学报[0253-231X], Published 2013, Issue 11,
某型涡轴发动机涡轮设计与分析 工程热物理学报[0253-231X], Published 2013, Issue 4,
某带分流叶片的亚声速离心压气机叶轮cfd结果确认及分析 航空动力学报, Published 2013, Issue 11,
车用加温器风机性能研究 工程热物理学报[0253-231X], Published 2013, Issue 10,
间断galerkin方法计算叶型转捩流动 航空动力学报[1000-8055], Published 2013, Issue 5,
高压比离心压气机设计与分析 工程热物理学报[0253-231X], Published 2013, Issue 10,
高膨胀比有机工质向心透平气动优化研究 工程热物理学报[0253-231X], Published 2013, Issue 7,
Cavitation mechanism of Oil-Film bearing and development of a new gaseous cavitation model based on air solubility JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME[0742-4787], Published 2012, Volume 134, Issue 3, Pages -
典型区域生物质发电资源分析 太阳能学报[0254-0096], Published 2012, Issue 7,
基于非结构网格间断有限元方法在可压缩流体中的应用 工程热物理学报[0253-231X], Published 2012, Issue 7,
某MW级燃机变几何动力涡轮动/静叶栅与排气道的流动分析 热能动力工程[1001-2060], Published 2012, Issue 6,
某mw级燃机非对称排气道性能分析 燃气轮机技术[1009-2889], Published 2012, Issue 3,
生物质直燃发电机组性能测试与火用分析 太阳能学报[0254-0096], Published 2012, Issue 8,
适用于间断galerkin方法的限制器研究 计算力学学报[1007-4708], Published 2012, Issue 5,
间断galerkin方法求解跨音压气机转子流场 工程热物理学报[0253-231X], Published 2012, Issue 1,
压气机侧向进气道的理论与实验研究 工程热物理学报[0253-231X], Published 2011, Issue 5,
我国工业余热回收利用技术综述 节能技术[1002-6339], Published 2011, Issue 2,
1.5级跨声压气机中时序效应的研究 航空动力学报[1000-8055], Published 2010, Issue 4,
Discontinuous galerkin solution of THREE-DIMENSIONAL REYNOLDS-AVERAGED NAVIER-STOKES equations with S-A turbulence model PROCEEDINGS OF THE ASME TURBO EXPO 2010: TURBOMACHINERY: AXIAL FLOW FAN AND COMPRESSOR AERODYNAMICS DESIGN METHODS, AND CFD MODELING FOR TURBOMACHINERY, VOL 7, PTS A-C, Published 2010, Pages 889-895
The momentum interpolation method based on the time-marching algorithm for All-Speed flows JOURNAL OF COMPUTATIONAL PHYSICS[0021-9991], Published 2010, Volume 229, Issue 20, Pages 7806-7818
一种轴承润滑油新空化模型 清华大学学报(自然科学版)[1000-0054], Published 2010, Issue 7,
多级轴流压气机稳定性数值研究 工程热物理学报[0253-231X], Published 2010, Issue 4,
时间推进的动量插值方法研究 工程热物理学报[0253-231X], Published 2010, Issue 10,
有机朗肯循环回收中低温工业余热的系统研究 Published 2010,
有机朗肯循环系统及其透平设计研究 工程热物理学报[0253-231X], Published 2010, Issue 12,
有机朗肯循环透平设计与分析 Published 2010,
涡轮叶栅流动分离涡模拟验证研究 工程热物理学报[0253-231X], Published 2010, Issue 1,
燃料特性对生物质直燃电站运行影响的研究 太阳能学报[0254-0096], Published 2010, Issue 8,
考虑油孔旋转的浮环轴承的载荷流量特性研究 工程热物理学报[0253-231X], Published 2010, Issue 6,
间断galerkin算法求解三维rans方程 清华大学学报(自然科学版)[1000-0054], Published 2010, Issue 11,
1.5级跨音速压气机内部流场数值分析 工程热物理学报[0253-231X], Published 2009, Issue 9,
Development of Roe-type scheme for all-speed flows based on preconditioning method Computers & Fluids[0045-7930], Published 2009, Volume 38, Issue 4, Pages 810-817
压气机静叶气封几何优化与流动分析 工程热物理学报[0253-231X], Published 2009, Issue 8,
微型燃气轮机向心透平内部流动分析 热力透平[1672-5549], Published 2009, Issue 2,
有大分离的压气机高压级静叶分离涡模拟研究 工程热物理学报[0253-231X], Published 2009, Issue 1,
有机朗肯循环在工业余热回收中的应用 Published 2009,
轴流压气机跨声级转子叶顶喷气的流动特性 推进技术[1001-4055], Published 2009, Issue 3,
静动干涉流动的分离涡模拟研究 工程热物理学报[0253-231X], Published 2009, Issue 6,
预处理方法与大涡模拟工程应用 中国科学(G辑:物理学 力学 天文学)[1672-1780], Published 2009, Issue 1,
黄色秸秆直燃电站给料系统的优化研究 现代电力[1007-2322], Published 2009, Issue 4,
An All-Speed Roe-type scheme and its asymptotic analysis of low mach number behaviour JOURNAL OF COMPUTATIONAL PHYSICS[0021-9991], Published 2008, Volume 227, Issue 10, Pages 5144-5159
Application of delayed detached eddy simulation and rans to compressor cascade flow PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, Published 2008, Pages 2077-2083
Application of detached eddy simulation to a subsonic compressor rotor PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 6, PT A, Published 2008, Pages 131-138
Des模型在压气机亚音转子中的应用探讨 工程热物理学报[0253-231X], Published 2008, Issue 6,
Des模型在压气机叶栅中的应用研究 工程热物理学报[0253-231X], Published 2008, Issue 12,
Preconditioning method and engineering application of large eddy simulation SCIENCE IN CHINA SERIES G-PHYSICS MECHANICS & ASTRONOMY[1672-1799], Published 2008, Volume 51, Issue 6, Pages 667-677
全速度roe格式低速性质解析证明 工程热物理学报[0253-231X], Published 2008, Issue 3,
压气机1.5跨音级内部流动分析 热力透平[1672-5549], Published 2008, Issue 2,
压气机级间抽气的数值模拟 工程热物理学报[0253-231X], Published 2008, Issue 1,
微型燃气轮机透平内部流动分析 Published 2008,
某离心叶轮的cfd分析和结果确认 工程热物理学报[0253-231X], Published 2008, Issue 8,
Des和rans模型在压气机叶栅流动中的研究 Published 2007,
Observation of centrifugal compressor stall and surge in phase portraits of pressure time traces at impeller and diffuser wall JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2007, Volume 129, Issue 6, Pages 773-779
压气机抽气级静叶吸力面抽气方式的研究 工程热物理学报[0253-231X], Published 2007, Issue 4,
叶顶间隙对压气机性能的影响 动力工程[1000-6761], Published 2007, Issue 6,
多级轴流压气机内的流动机理研究 工程热物理学报[0253-231X], Published 2007, Issue S1,
新型高低速流统一算法及其叶轮机应用 航空学报[1000-6893], Published 2007, Issue 6,
叶轮机械内部不稳定流动现象的研究 工程热物理学报[0253-231X], Published 2006, Issue 6,
离心压气机不稳定特性的研究 动力工程[1000-6761], Published 2006, Issue 2,
用流函数求解叶轮机械三维跨音流场 工程热物理学报[0253-231X], Published 1994, Issue 1,
用流函数方法求解叶轮机械三维气动设计问题 航空学报[1000-6893], Published 1993, Issue 10,
A numerical procedure of 3-DIMENSIONAL design problem in turbomachinery JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME[0889-504X], Published 1992, Volume 114, Issue 3, Pages 548-552
Pseudostream function formulation - a method of solving 3-DIMENSIONAL aerodynamic analysis and DESIGN-PROBLEMS in turbomachinery SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY[1001-6511], Published 1992, Volume 35, Issue 3, Pages 344-355
Pseudostream function formulation――a method of solving THREE-DIMENSIONAL aerodynamic analysis and de Science in China%Ser.A[1006-9283], Published 1992, Issue 3,
拟流函数法――叶轮机械内三维流动分析问题和设计问题的一种求解方法 中国科学(A辑 数学 物理学 天文学 技术科学)[1006-9232], Published 1992, Issue 2,
用三维流函数求解叶轮机械三维可压流场 工程热物理学报[0253-231X], Published 1992, Issue 2,
用拟流函数求解叶轮机械三维可压流场 工程热物理学报[0253-231X], Published 1991, Issue 4,
风力透平叶片振动时的三元非定常气动力 空气动力学学报[0258-1825], Published 1989, Issue 3,
Development and Validation of a Gaseous Cavitation Model for Hydrodynamic Lubrication Proceedings of the Institution of Mechanical Engineers, Part J- Journal of Engineering Tribology,
曲率连续的压气机叶片前缘设计方法 推进技术,
京公网安备 11010802027423号