当前位置: X-MOL首页全球导师 国内导师 › 杜建镔

个人简介

杜建镔,副教授,男,汉族,1972年11月7日出生。华中理工大学工程力学学士(1993.9)及计算力学硕士(1996.2),清华大学固体力学博士(1999.9)。1999-2001在美国密西根大学航空工程系从事博士后研究,主要研究领域为结构与材料拓扑优化。2001-2002在丹麦奥尔堡大学机械工程学院从事博士后研究,2003-2005年在丹麦奥尔堡大学机械工程学院任研究助理教授,从事振动和声学结构多目标拓扑优化设计方法研究。2006年至今在清华大学航天航空学院工作,主要研究领域为结构和材料拓扑优化技术,结构振动和噪声控制的被动优化技术,多物理场耦合分析及优化方法,机构参数优化,计算力学及有限元方法。在国内外专业期刊和会议上发表论文100余篇,Google Scholar引用1676次,Web of Science核心集引用996次(截止到2023年4月)。受邀在2016年亚洲结构与多学科优化大会(ACSMO2016,2016年5月,日本长崎)上做Keynote报告。担任国际期刊SAMO编委(2017年起),担任亚洲结构与多学科优化学会理事(2018年起),多次担任国际会议科学委员会委员和分会场主席。 近年来作为课题/子课题负责人完成或正在承担的重要项目有国家自然科学基金面上项目,国家自然科学基金重大研究计划项目子课题,专项项目,大飞机项目,航天一院、二院、四院项目,中石化项目,中海油项目等航天、航空、交通、工程机械装备相关的一些课题。参与起草一份国家航天行业标准(负责地面设备舱体结构分析规范部分)。与Niels Olhoff教授(国际结构和多学科优化协会ISSMO前主席)合作撰写英文专著《结构声学和振动计算》中的专题文章“第5章-结构抑振和降噪的拓扑优化设计”(2009,Springer出版)。与Niels Olhoff教授合作撰写英文专著《结构和连续介质力学中的拓扑优化》中涉及振动声学拓扑优化的专题文章四章:第10章、第11章、第13章和第14章。独立撰写完成专著《结构优化及其在振动声学设计中的应用》(2015年4月,清华大学出版社)。另外承担有《飞行力学基础》,《理论力学》,《非线性振动与随机振动》以及《结构优化设计》等本科及研究生课程的教学任务。获得全国第六届基础力学青年教师讲课比赛理论力学组特等奖(2016年7月)。 教育背景 1996/3–1999/7,清华大学,固体力学,博士 1993/9–1996/2,华中科技大学,计算力学,硕士 1989/9–1993/7,华中科技大学,工程力学,学士 工作履历 2007/12–至今,清华大学,航天航空学院,副教授 2006/3–2007/,清华大学,航院,助理研究员 2003/2–2006/2,Aalborg University,Department of Mechanical Engineering,Research Assistant Professor 2001/12–2003/1,Aalborg University,Department of Mechanical Engineering,Postdoc 1999/9–2001/11,University of Michigan,Department of Aerospace,Postdoc 奖励与荣誉 全国第六届基础力学青年教师讲课比赛理论力学组“特等奖”,2016年 清华大学“青年教师教学优秀奖”,2013年 清华大学“优秀国防生导师”,2011年 清华大学“优秀班主任”二等奖,2011年 清华大学第二十八届“挑战杯”学生课外学术科技作品竞赛的“优秀指导教师”,2010

研究领域

结构力学与结构优化;结构拓扑优化;结构振动、噪声控制和优化;结构多尺度优化;多场耦合与智能结构系统动力学优化设计

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Yang Liu, Liang Chen, Zhen Li, Jianbin Du*, 2022, On the Global Optimum for Heat Conduction, International Journal of Heat and Mass Transfer, Volume 198, pp. 123381, https://doi.org/10.1016/j.ijheatmasstransfer.2022.123381. (SCI). Shi, Shangjun; Zhou, Pingzhang; Lu, Zhenhua; Du, Jianbin, 2022,Design Synthesis of Vibration Isolation System Considering Host Structure, Damping Layer, and Resilient Mounts,JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES. Liu, Yang; Yang, Cheng; Wei, Peng; Zhou, Pingzhang; Du, Jianbin(*); An ODE-driven level-set density method for topology optimization, Computer Methods in Applied Mechanics and Engineering, 2021, 387:0-114159. SCIE, EI. 王浩轩; 吴开; 杜建镔(*); 多子域模式重复结构多目标拓扑优化, 计算力学学报, 2021, 38(04):437-444. 北大中文核心期刊, 其他. Wu, Kai; Sigmund, Ole; Du, Jianbin(*); Design of metamaterial mechanisms using robust topology optimization and variable linking scheme, Structural and Multidisciplinary Optimization, 2021, 63(4):1975-1988. SCIE, EI. Yang, Cheng; Du, Jianbin(*); Cheng, Zaibin; Wu, Yi; Li, Chaowei; A highly efficient beam-in-beam large sliding contact method for flexible multibody dynamics, Computational Mechanics, 2021, 67(4):1155-1175. SCIE, EI. Liang, Xuan; To, Albert C.; Du, Jianbin(*); Zhang, Yongjie Jessica; Topology optimization of phononic-like structures using experimental material interpolation model for additive manufactured lattice infills, Computer Methods in Applied Mechanics and Engineering, 2021, 377:0-113717. SCIE, EI. Zhou, Pingzhang; Peng, Yingchao; Du, Jianbin(*); Topology optimization of bi-material structures with frequency-domain objectives using time-domain simulation and sensitivity analysis, Structural and Multidisciplinary Optimization, 2021, 63(2):575-593. SCIE, EI. Cheng, Yang; Jianbin, Du(*); Zaibin, Cheng; Yi, Wu; Chaowei, Li; Flexibility investigation of a marine riser system based on an accurate and efficient modelling and flexible multibody dynamics, Ocean Engineering, 2020, 207:0-107407. SCIE, EI. Xuan Liang and Jianbin Du*, Design of Phononic-like Structures and Band-Gap Tuning by Concurrent Two-scale Topology Optimization, Structural and Multidisciplinary Optimization, 2020, 61: 943–962, https://doi.org/10.1007/s00158-020-02489-4. (SCI). Xuan Liang, Lin Cheng, Tian-Qiao Liu*, Jianbin Du*, Nonlinear dynamic analysis of the bridge bearing and genetic algorithm based optimization for seismic mitigation, Advances in Structural Engineering, 2020, 23(12): 2539–2556, DOI: 10.1177/1369433220916936. (SCI). Xuan Liang; Jianbin Du*; Concurrent multi-scale and multi-material topological optimization of vibro-acoustic structures,Comput. Methods Appl. Mech. Engrg. 2019,(349):117–148. Pingzhang Zhou; Guotao Ou; Jianbin Du*; Topology optimization of continua considering mass and inertia characteristics, Structural and Multidisciplinary Optimization 2019,60(2):429–442. Haroon Imtiaz; YaoPeng Fang; JianBin Du*; Bin Liu*; Fundamental problem in optimizing the biaxial testing specimen,SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2019,62(5):773–780. Tao Liu; Zhijie Feng; Jianbin Du*; 2019, Configuration Smoothing and Grid Reconstruction of Structural Topology Optimization for 3D Printing, Inverse Problems, Design and Optimization Symposium (IPDO2019), Tianjin, China, September 24-26, 2019. Pingzhang Zhou; Jianbin Du*; Zhenhua Lv; 2019, Multi-objective Topological Design using Discrete Cosine Transformation Compression and Multi-resolution Mesh, the World Congress of Structural and Multidisciplinary Optimization (WCSMO13), Beijing, China, May 20-24, 2019. Kai Wu; Jianbin Du*; 2019, Multi-Objective Dynamic Topology Optimization of the Aircraft Cabin, the World Congress of Structural and Multidisciplinary Optimization (WCSMO13), Beijing, China, May 20-24, 2019. Pingzhang Zhou; Guotao Ou; Jianbin Du*; 2019, Topology optimization of continua considering center of mass and moment of inertia, The World Congress of Structural and Multidisciplinary Optimization (WCSMO13), Beijing, China, May 20-24, 2019. Pingzhang Zhou; Jianbin Du*; Lu, Zhenhua; Hybrid optimization of a vibration isolation system considering layout of structure and locations of components, Structural and Multidisciplinary Optimization, 2018, 57(1): 1-15. Pingzhang Zhou(#); Jianbin Du(*); Zhenhua Lv, Highly efficient density-based topology optimization using DCT-based digital image compression, Structural and Multidisciplinary Optimization, 2018.01 , 57(1):463~467 Zhou, Pingzhang(#)(*); Du, Jianbin(*); Lu, Zhenhua, A generalized DCT compression based density method for topology optimization of 2D and 3D continua, Computer Methods in Applied Mechanics and Engineering, 2018.06.01 , 334(1):1~21 Zhou, Pingzhang(#)(*); Du, Jianbin; Lu, Zhenhua, Simultaneous topology optimization of supporting structure and loci of isolators in an active vibration isolation system, Computers & Structures, 2018.01.01 , 194(1):74~85 Du, Jianbin(#)(*); Zhou, Pingzhang; Lv, Zhenhua, Multiple Objective Design of a Vibration Isolation System using Hybrid Optimization Methods, The 2018 Asian Congress of Structural and Multidisciplinary Optimization (ACSMO2018), 2018.05.21-2018.05.24 Wu, Kai(#); Zhang, Haixi; Du, Jianbin(*), Structural Design of the Aircraft Rudder Based on Multi-Objective Topology Optimization, The 2018 Asian Congress of Structural and Multidisciplinary Optimization (ACSMO2018), 2018.05.21-2018.05.24 Yang, Cheng(#); Du, Jianbin(*); Cheng, Zaibin, Optimization of Marine Riser System in Flexible Multibody Dynamics, The 2018 Asian Congress of Structural and Multidisciplinary Optimization (ACSMO2018), 2018.05.21-2018.05.24 Yang, Cheng(#); Du, Jianbin(*); Cheng, Zaibin; Li, Chaowei; Wu, Yi, NONLINEAR ANALYSIS OF UNDERWATER MARINE RISER RECOIL USING HIGHLY EFFICIENT MULTIBODY DYNAMICS METHOD, 13th World Congress on Computational Mechanics (WCCM XIII), New York, 2018.07.22-2018.07.27 Zhou, Pingzhang(#); Du, Jianbin(*); Lv, Zhenhua, Multiphysics Topology Optimization using DCT-based compression, The 13th World Congress in Computational Mechanics (WCCMXIII), New York, 2018.07.22-2018.07.27 *Zhou, Pingzhang; Du, Jianbin; Lv, Zhenhua, Topology optimization of freely vibrating continuum structures based on nonsmooth optimization, Structural and Multidisciplinary Optimization, 2017 (online published, doi:10.1007/s00158-017-1677-5, pp1-16). *Zhou, Pingzhang; Du, Jianbin; Lv, Zhenhua, Interval analysis based robust truss optimization with continuous and discrete variables using mix-coded genetic algorithm, Structural and Multidisciplinary Optimization, 2017 (online published, doi:10.1007/s00158-017-1668-6, pp1-18).. Olhoff, Niels; *Du, Jianbin, Generalized incremental frequency method for topological design of continuum structures for minimum dynamic compliance subject to forced vibration at a prescribed low or high value of the excitation frequency, Structural and Multidisciplinary Optimization (DOI 10.1007/s00158-016-1574-3), 54(5), pp 1113-1141, 2016/11. *Du, Jianbin; Sun, Chuangchuang, Reliability-based vibro-acoustic microstructural topology optimization, Structural and Multidisciplinary Optimization (DOI:10.1007/s00158-016-1571-6), 55(4), pp 1195-1215, 2017/4. Olhoff, Niels; *Du, Jianbin, (Keynote lecture)A Generalized Incremental Frequency Method for FrequencyResponse Topology Optimization of Vibro-acoustic Structures, Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO2016), 2016/5/22-2016/5/26, Nagasaki, 2016/5/22, 特邀报告. *杜建镔, 结构动力学和声学拓扑优化(“结构拓扑优化的理论与方法高级讲习班”邀请报告), 中国,大连(NSFC高级讲习班邀请报告), 2016/8/29. *Du, Jianbin; Huang, Zhenting; Yang, Ruizhen, Optimization of the motion control mechanism of the hatch door of airliner, Structural and Multidisciplinary Optimization, (online published, DOI: 10.1007/s00158-014-1191-y), 51(5), pp 1173-1186, 2015/05. 梁轩;*杜建镔, 基于准静态实验的减隔震支座非线性动力学分析, 北京力学会第21届学术年会暨北京振动工程学会第22届学术年会, p 11, 中国北京, 2015/1/11. 梁轩;*杜建镔, 采用减震榫桥梁非线性动力学分析计算方法, 工程力学, ( DOI:10.6052/j.issn.1000-4750.2014.09.0752), 33(4), pp 136-143, 2016/4. 白会彦;杜建镔, 某减速机构刚度分析及测试, 计算机辅助工程, 25(05), pp 7-11,2016/10/31 (DOI: 10.13340 /j.cae.2016.05.002) Liang, Xuan; *Du, Jianbin, Integrated multi-scale vibro-acoustic topology optimization of structure and material, 11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), 2015/6/7-2015/6/12, Sydney, 2015/06/07, 口头报告. *Du, Jianbin; Sun, Chuangchuang, Reliability-Based Microstructural Topology Design with Respect to Vibro-Acoustic Criteria, 11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), 2015/6/7-2015/6/12, Sydney, 2015/06/07, 口头报告. *Du, Jianbin; Yang, Ruizhen, Vibro-acoustic design of plate using bi-material microstructural topology optimization, Journal of Mechanical Science and Technology, 29(4), pp 1413-1419, 2015/04/01. *杜建镔, 结构优化及其在振动和声学设计中的应用, 北京: 清华大学出版社, 2015/04/20. *Du J.B.; Huang Z.T., Bi-level design optimization of the hatch door mechanism, 4th International Conference on Advanced Design and Manufacturing Engineering, ADME 2014, Vol635-637, 2014/7/26-2014/7/27, pp 127-130, 2014. *Du, Jianbin; Yang, Ruizhen, Vibro-acoustic design of bi-material plate using topology optimization at microscale, The Eighth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, 2014/05/25-2014/05/29, 2014/05/25, 口头报告. *杜建镔, 基于减振降噪的空间站结构多目标多尺度拓扑优化技术, 第三届载人航天学术大会, 2014/10/15-2014/10/17, pp 641-647, 成都, 2014/10/15, 口头报告. *Du, Jianbin; Yang, Ruizhen, Microscopic Layout Design of Metamaterial, Applied Mechanics and Materials, 633-634卷, pp 1273-1276, 2014/11/07. Niels Olhoff; Jianbin Du, Introductory Notes on Topological Design Optimization of Vibrating Continuum Structures, in book (Chapter 10): Topology Optimization in Structural and Continuum Mechanics, Rozvany, George I. N.; Lewinski, Tomasz, Springer Vienna, pp 259-273, Springer Vienna, 2014. Niels Olhoff; Jianbin Du, Structural Topology Optimization with Respect to Eigenfrequencies of Vibration, in book (Chapter 11): Topology Optimization in Structural and Continuum Mechanics, Rozvany, George I. N.; Lewinski, Tomasz, Springer Vienna, pp 275-297, Springer Vienna, 2014. Niels Olhoff; Jianbin Du, Topological Design for Minimum Dynamic Compliance of Structures under Forced Vibration, in book (Chapter 13): Topology Optimization in Structural and Continuum Mechanics, Rozvany, George I. N.; Lewinski, Tomasz, Springer Vienna, pp 325-339, Springer Vienna, 2014. Niels Olhoff; Jianbin Du, Topological Design for Minimum Sound Emission from Structures under Forced Vibration, in book (Chapter 14): Topology Optimization in Structural and Continuum Mechanics, Rozvany, George I. N.; Lewinski, Tomasz, Springer Vienna, pp 341-357, Springer Vienna, 2014. Yang Ruizhen, *Du Jianbin, 2013, Microstructural topology optimization with respect to sound power radiationStructural and Multidisciplinary Optimization, 47(2), pp 191-206, 2013/2. *Du, Jianbin, Olhoff, Niels, 2010, Topological design of vibrating structures with respect to optimum sound pressure characteristics in a surrounding acoustic mediumStructural and Multidisciplinary Optimization, 42(1), pp 43-54, 2010/7. Du, Jianbin, Olhoff, Niels, 2007, Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gapsStructural and Multidisciplinary Optimization, 34(2), pp 91-110, 2007/8. Du, Jianbin, Olhoff, Niels, 2007, Minimization of sound radiation from vibrating bi-material structures using topology optimizationStructural and Multidisciplinary Optimization, 33(4-5), pp 305-321, 2007/4. Du, J, Olhoff, N, 2004, Topological optimization of continuum structures with design-dependent surface loading - Part I: new computational approach for 2D problemsStructural and Multidisciplinary Optimization, 27(3), pp 151-165, 2004/5. Du, J, Olhoff, N, 2004, Topological optimization of continuum structures with design-dependent surface loading - Part II: algorithm and examples for 3D problemsStructural and Multidisciplinary Optimization, 27(3), pp 166-177, 2004/5. *Du, J, Taylor, JE, 2002, Application of an energy-based model for the optimal design of structural materials and topologyStructural and Multidisciplinary Optimization, 24(4), pp 277-292, 2002/10. Niels Olhoff, Jianbin Du, On Topological Design Optimization of Structures Against Vibration and Noise Emission, Computational Aspects of Structural Acoustics and Vibration, G?ran Sandberg and Roger Ohayon, Springer Vienna, pp 217-276, 奥地利, 2009/6/18. *杜建镔, 宋先凯, 董立立, 基于拓扑优化的声学结构材料分布设计, 力学学报, 43(02), pp 306-315, 2011. 宋先凯, *杜建镔, 基于优化模型的结构声学耦合界面载荷传递算法, 计算力学学报, 29(1), pp 6-12, 2012/2. 侯政, *杜建镔, 基于APDL的结构拓扑优化程序开发及在C919客机舱门铰链臂设计中的应用, 计算机辅助工程, 22(1), pp 10-15, 2013/2. Yang, Ruizhen, *Du, Jianbin, VIBRO-ACOUSTIC DESIGN BASED ON MICROSTRUCTURE TOPOLOGY OPTIMIZATION, The Seventh China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM7), 2012/6/18-2012/6/21, Huangshan, 2012/6/18, 口头报告. *Du, Jianbin, Song, Xiankai, Olhoff Niels, Topological Design of Acoustic Structure based on the BEM-FEM Format and the Mixed Formulation, WCSMO9 - 9th World Congress on Structural and Multidisciplinary Optimization, 2011/6/13-2011/6/17, Shizuoka, 2011/6/13, 口头报告. Huang, Zhenting, Yang, Ruizhen, *Du, Jianbin, Liu, Ruosi, Li, Zhen, Parameter Optimization of the Hatch Mechanism of ARJ21, 9th World Congress on Structural and Multidisciplinary Optimization (WCSMO9), 2011/6/13-2011/6/17, Shizuoka, 2011/6/13, 口头报告. *Du, Jianbin, Song, Xiankai, FEM-BEM based structural-acoustic topology optimization using the mixed formulation, The 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM6), 2010/6/22-2010/6/25, Kyoto, 2010/6/22, 口头报告. *杜建镔,宋先凯, 基于声学准则的阻尼材料分布优化设计, 第一届结构及多学科优化工程应用与理论研讨会(CSMO-2009), 2009/9/3-2009/9/4, 大连, 2009/9/3, 口头报告. *Jianbin Du, Niels Olhoff, Minimization of Sound Pressure in the Acoustic Field Generated by Vibrating Structures using Topology Optimization, The 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO8), 2009/6/1-2009/6/5, Lisbon, 2009/6/1, 口头报告. Olhoff, Niels, Du, Jianbin, Topology Optimization of Structures Against Vibration and Noise, 12th International Congress on Sound and Vibration (ICSV12), 2005/7/11-2005/7/14, Lisbon, 2005/7/11, 特邀报告. *Du, Jianbin; Yang, Ruizhen, TOPOLOGICAL DESIGN OF ACOUSTIC MICROSTRUCTURE, XXIII ICTAM2012, 2012/8/19-2012/8/24, Beijing, 2012/8/19, Oral presentation.

学术兼职

国际结构与多学科优化学会(ISSMO)会员 国际期刊《Structural and Multidisciplinary Optimization》(SAMO)编委(2017年起) 亚洲结构与多学科优化学会(ASSMO)理事会理事(2018年起) 多次担任世界结构与多学科优化大会(WCSMO)及亚洲结构与多学科优化大会(ACSMO)科学委员会委员和分会场主席

推荐链接
down
wechat
bug