近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zhang, Y., Diabat Ali, Zhang, Z. H.* (2021). Reliable closed-loop supply chain design problem under facility-type-dependent probabilistic disruptions. Transportation Research Part B: Methodological, 146, 180-209
Liang, J., Wang, Y., Zhang, Z. H.*, Sun, Y. (2019). Energy efficient production planning and scheduling problem with processing technology selection. Computers & Industrial Engineering (DOI:10.1016/j.cie.2019.04.042.)
Li, Qiaofeng, Zhang, Z. H.*. Robust design of a reverse logistics network for photovoltaic modules with resource price uncertainties. IISE Transaction, , 51 (7), 691-708 (the Best Application Paper in the 2020 IISE Transactions Focus Issue on Design and Manufacturing)
Liu, Kanglin, Li, Qiaofeng, Zhang, Z. H.* (2019). Distributionally robust optimization of an emergency medical service station location and sizing problem with joint chance constraints. Transportation Research Part B: Methodological, 119, 79-101
Zhang, Z. H., Gemma Berenguer, Pan,X. (2018). Location, inventory and testing decisions in closed loop supply chains: a multimedia company. IISE Transactions, 51, 1, 41-56 (IISE Transactions 2020 Scheduling and Logistics Best Paper Honorary Mention)
Chaher Alzaman, Zhang, Z. H., Ali Diabat* (2018). Supply Chain Network Design with Direct and Indirect Production Costs: Hybrid Gradient and Local Search Based Heuristics. International Journal of Production Economics, 203, 203-215
Zhang, Yanzi, Zhang, Z. H.* (2018). Impact of cannibalization between new and remanufactured products on supply chain design and operation. IISE Transaction, 51, 1, 22-40
Tian, X., Zhang, Z. H.* (2018). Capacitated disassembly scheduling and pricing of returned products with price-dependent yield. Omega, 84, 160-174
Liu, K., Zhang, Z. H.*. (2017). Capacitated disassembly scheduling under stochastic yield and demand. European Journal of Operational Research, 269, 244-257
Liu, C., Wang, C., Zhang, Z. H., Zheng, L.* (2017). Scheduling with job-splitting considering learning and the vital-few law. Computers & Operations Research, 90, 264-274
Bai, D., Tang, M., Zhang, Z. H.*, Santibanez-Gonzalez E. D. (2018). Flow shop learning effect scheduling problem with release dates. Omega: The International Journal of Management Science. 78, 21-38
Cheng, N.*, Zhang, Z. H., Huang, S., Zheng, L. (2017). Chinese consumer responses to carbon labeling: evidence from experimental auctions. Journal of Environmental Planning and Management, 4, 1-19
Bai, D., Liang, J., Liu, B., Tang, M., Zhang, Z. H.* (2017), Permutation flow shop scheduling problem to minimize nonlinear objective function with release dates, Computers & Industrial Engineering, 112, 336-347.
Bai, D., Zhang, Z. H.*, Zhang, Q., Tang, M. (2017). Open shop scheduling problem to minimize total weighted completion time. Engineering Optimization, 49, 98-112
Wang, C., Liu, C., Zhang, Z. H., Zheng, L.* (2016). Minimizing the total completion time for parallel machine scheduling with job splitting and learning. Computers & Industrial Engineering, 97, 170-180.
Zhang, Z. H.*, Unnikrishnan, A. (2016). A coordinated location-inventory problem in closed-loop supply chain. Transportation Research Part B: Methodological, 89, 127-148.
Qin, H., Zhang, Z. H.*, Bai, D. (2016). Permutation flowshop group scheduling with position-based learning effect. Computers & Industrial Engineering, 92, 1-15.
Santibanez-Gonzalez, E. D., Sarkis, J., Dolgui, A., Koh, L., Govindan, K., Jin, M.,…& Zhang, Z. (2016). Low carbon economy and equitable society: production, supply chain, and operations management perspectives. Journal of Cleaner Production, (117), 7-9.
Bai, D. *, Zhang, Z. H., & Zhang, Q. (2016). Flexible open shop scheduling problem to minimize makespan. Computers & Operations Research, 67, 207-215.
Ji, X., Zhang, Z. H., Huang, S.*, & Li, L. (2016). Capacitated disassembly scheduling with parts commonality and start-up cost and its industrial application. International Journal of Production Research, 54 (4), 1225-1243.
Zhang, Z. H., Berenguer, G., & Shen, Z. J. (2015). A capacitated facility location model with bidirectional flows. Transportation Science, 49 (1), 114-129.
Movahed, K. K., & Zhang, Z. H.* (2015). Robust design of (s, S) inventory policy parameters in supply chains with demand and lead time uncertainties. International Journal of Systems Science, 46 (12), 2258-2268.
Zhang, Z. H.*, & Li, K. (2015). A novel probabilistic formulation for locating and sizing emergency medical service stations. Annals of Operations Research, 229 (1), 813-835.
Zhang, Z. H.*, Li, B. F., Qian, X., & Cai, L. N. (2014). An integrated supply chain network design problem for bidirectional flows. Expert Systems with Applications, 41 (9), 4298-4308.
Zhang, Z. H.*, & Bai, D. (2014). An extended study on an open-shop scheduling problem using the minimisation of the sum of quadratic completion times. Applied Mathematics and Computation, 230, 238-247.
Pan, T., Zhang, Z. H.*, & Cao, H. (2014). Collaborative production planning with production time windows and order splitting in make-to-order manufacturing. Computers & Industrial Engineering, 67, 1-9.
Bai, D.*, & Zhang, Z. H. (2014). Asymptotic optimality of shortest processing timebased algorithms for flow shop and open shop problems with nonlinear objective functions. Engineering Optimization, 46 (12), 1709-1728.
Chen, X., Huang, S.*, Chen, D., Zhang, Z. H., Zheng, L., Grossmann, I., & Chen, S. (2014). Hierarchical Decomposition Approach for Crude Oil Scheduling: A SINOPEC Case. Interfaces, 44 (3), 269-285.
Zhang, Z. H.*, & Jiang, H. (2014). A robust counterpart approach to the bi-objective emergency medical service design problem. Applied Mathematical Modelling, 38 (3), 1033-1040.
Bai, D.*, & Zhang, Z. H. (2014). On the asymptotic optimality and improved strategies of SPTB heuristic for open-shop scheduling problem. International Journal of Systems Science, 45 (8), 1657-1667.
Guo, M., Li, B.*, Zhang, Z. H., Wu, S., & Song, J. (2013). Efficiency evaluation for allocating community-based health services. Computers & Industrial Engineering, 65 (3), 395-401.
Zhang, Z. H.*, Jiang, H., & Pan, X. (2012). A Lagrangian relaxation based approach for the capacitated lot sizing problem in closed-loop supply chain. International Journal of Production Economics, 140 (1), 249-255.
Zhang, C., Zhang, Z. H., Zheng, L.*, & Miao, L. (2011). A decision support system for the allocation of yard cranes and blocks in container terminals. Asia-Pacific Journal of Operational Research, 28 (06), 803-829.
Zhang, C., Zheng, L.*, Zhang, Z. H., Shi, L., & Armstrong, A. J. (2010). The allocation of berths and quay cranes by using a sub-gradient optimization technique. Computers & Industrial Engineering, 58 (1), 40-50.
Wang, S., Zheng, L.*, & Zhang, Z. H. (2010). Decomposition Algorithms for the Interval Scheduling Problem. Asia-Pacific Journal of Operational Research, 27 (04), 517-537.
Zheng, L.*, Yang, X. M., Zhang, Z. H., & Liu, T. I. (2008). A web-based machining parameter selection system for life cycle cost reduction and product quality enhancement. Computers in Industry, 59 (2), 254-261.
Liu, S. G.*, Zheng, L., Zhang, Z. H., Li, Z. Z., & Liu, D. C. (2007). Optimization of the number and positions of fixture locators in the peripheral milling of a low-rigidity workpiece. The International Journal of Advanced Manufacturing Technology, 33 (7-8), 668-676.
Liu, S. G., Zheng, L.*, Zhang, Z. H., & Wen, D. H. (2006). Optimal fixture design in peripheral milling of thin-walled workpiece. The International Journal of Advanced Manufacturing Technology, 28 (7-8), 653-658.
Zhang, Z. H., Zheng, L.*, Zhang, L., Li, Z., Liu, D., & Zhang, B. (2005). A study on calibration of coefficients in end milling forces model. The International Journal of Advanced Manufacturing Technology, 25 (7-8), 652-662.
Li, Z. Z.*, Zhang, Z. H., & Zheng, L. (2004). Feedrate optimization for variant milling process based on cutting force prediction. The International Journal of Advanced Manufacturing Technology, 24 (7-8), 541-552.
Zhang, Z. H., Zheng, L.*, Li, Z., Liu, D., Zhang, L., & Zhang, B. (2003). A cutting force model for a waved-edge end milling cutter. The International Journal of Advanced Manufacturing Technology, 21 (6), 403-410.
Zhang, L.*, Zheng, L., Zhang, Z. H., Liu, Y., & Li, Z. Z. (2002). On cutting forces in peripheral milling of curved surfaces. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (10), 1385-1398.
会议论文
Li, W., Zhang, Z. H.*. Balancing Trade-offs between Utilization and Work-in-Process Inventory Levels in Flow Shop Production. In: CASE 2018–14th IEEE International Conference on Automation Science and Engineering, Munich, Germany, August 20–24, 2018.
Bai, D., Liang, J., Miao, Y., Zhang, Z. H.*. Scheduling Two-stage Flexible Flowshop with Learning Effect. In: CASE 2018–14th IEEE International Conference on Automation Science and Engineering, Munich, Germany, August 20–24, 2018.
H.-Y. Chiang, X. Tian, Zhang Z.-H.*. (2017, Sept).Nonlinear multi-objective programming approach to next-day electricity real-time pricing optimization. (BEST PAPER AWARD) The Second Global Conference on Theory and Applications of OR/OM for Sustainability (GCTAOS) 6-8 September, Beijing, China.
Chen, X., Zhang, Z. H., Huang, S. M., & Zheng, L.* (2010, October). Spatial-based decomposition approach for the crude scheduling problem of a refinery with multiple ports and long-distance pipelines. In Industrial Engineering and Engineering Management (IE&EM), 2010 IEEE 17Th International Conference on (pp. 808-812). IEEE.
Zhang, C., Zhang, Z. H., Zheng, L.*, & Cai, L. (2007, August). The Assignment of Customers in Multi-depot Vehicle Routing Problem with Fleet Size Constraint for Each Depot. In Automation and Logistics, 2007 IEEE International Conference on (pp. 1897-1901). IEEE.
Wang, S., Zheng, L.*, & Zhang Z. H. (2007, August). Bi-ACO: A Tool for Solving Bi-Criteria Optimization. In Automation and Logistics, 2007 IEEE International Conference on (pp. 787-792). IEEE.
Wang, S., Zheng, L.*, & Zhang, Z. H. (2007, December). Study on plan of track lines in marshalling station. In Industrial Engineering and Engineering Management, 2007 IEEE International Conference on (pp. 852-856). IEEE.
会议报告
Zhang, Z. H., Gemma Berenguer. Design of a subsidized reverse supply chain in the Chinese electronics industry. In: 2018 POMS Annual Conference, Houston, Texas, USA, May 4–7, 2018.
Li, Qiaofeng, Zhang, Z. H.*. Reverse supply chain design problem in photovoltaic industry. In: 2018 POMS Annual Conference, Houston, Texas, USA, May 4–7, 2018.
Zhang, Yanzi, Zhang, Z. H.*. A reliable location-inventory problem in a closed-loop supply chain. In: 2018 POMS Annual Conference, Houston, Texas, USA, May 4–7, 2018.
Liu, Kanglin, Zhang, Z. H.*. Distributionally robust optimization of an emergency medical service station location problem. In: 2017 INFORMS Annual Meeting, Houston, Texas, USA, Oct. 22-25, 2017.
Zhang, Yanzi, Zhang, Z. H.*. A Joint Pricing-Location-Inventory Problem Considering Market Cannibalization. In: 2017 POMS Annual Conference, Seattle, WA, USA, May 5–8, 2017.
Zhang, Z. H.*, Gemma Berenguer. Testing, Location and Inventory Decisions in the Design of Closed-Loop Supply Chains. In: 2017 POMS Annual Conference, Seattle, WA, USA, May 5–8, 2017.
出版书籍
Liu Kanglin, Wang M., Zhang Z. H.. "An outer approximation algorithm for capacitated disassembly scheduling problem with parts commonality and random demand" in Book: Large Scale Optimization Applied to Supply Chain & Smart Manufacturing: Theory & Real-Life Applications. ISSN: 1931-6828. Springer, 2018
Li Zheng, Simin Huang, Zhihai Zhang. Manufacturing Productivity in China. ISBN: 978-1-4665-9542-2. CRC Press, Taylor & Francis Group, 2015
Zhihai Zhang (Translation). Scheduling theory, algorithm and application (second edition), Tsinghua University Press, 2007
京公网安备 11010802027423号