个人简介
教育背景
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China, 1992
Doctor of Philosophy in Manufacturing Engineering
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China, 1988
Master of Science in Manufacturing Engineering
Department of Precision Instruments, Tsinghua University, Beijing, China, 1985
Bachelor of Science in Mechanical Engineering
工作经历
Department of Industrial Engineering, Tsinghua University, Beijing, China
Associate Professor (2001.10 - present)
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China
Associate Professor (1994.12 - 2001.9)
Assistant Professor (1992.4 - 1994.11)
Metz Center, Arts et Métiers ParisTech, France
Visiting Professor (2011.1-2011.2)
Research on manufacturing process analysis and production management
Visiting Professor (2007.1-2007.2)
Research on production management and lean production system
Laboratory of Machine Tool and Production Engineering, RWTH Aachen University, Germany
Visiting Professor (2004.10 - 2004.12)
Review and reappraisal of the Production Management course in the Sino-German Joint Masters Program
Joint research in Collaborative Manufacturing of Tools, Dies and Moulds in Germany and China)
Laboratory of Precision and Intelligence, Tokyo Institute of Technology, Japan
Visiting Scholar (1997.8-1998.10)
Research on virtual coordinate measuring machine
荣誉与奖励
National Teaching Achievement Award, by Ministry of Education, first prize, No.3, 2014
Award of Outstanding Faculty Member in Teaching and Cultivating, by Tsinghua University, 2013
High-Education Teaching Achievement Award, by Beijing Municipal Government, first prize, No.3, 2012
Teaching Achievement Award, by Tsinghua University, grand prize, No.3, 2012
Teaching Achievement Award, by Tsinghua University, second prize, No.2, 2012
Tsinghua Excellent Course Award, No.1, 2012
Supervision Award of Contributions in Laboratory Construction by Students, by Tsinghua University, first prize, No.1, 2012
Award of My Most Favorite Faculty Member, voted by undergraduate students, by Tsinghua University, 2009
Award of Innovations in Curriculum, by IIE, No.4, 2007
Teaching Achievement Award, by Tsinghua University, first prize, No.3, 2006
Laboratory Technology Achievement Award, by Tsinghua University, second prize, No.1, 2006
Tsinghua Excellent Faculty Member Award, by Tsinghua University, 2005
Best Supervisor Award, voted by graduate students, by Tsinghua University, 2005 and 2004
DAAD (German Academic Exchange Service) Scholarship , by DAAD, 2004
Tsinghua Excellent Team Award, by Tsinghua University, No.5, 2004
Teaching Achievement Award, by Tsinghua University, second prize, No.4, 2004
Award of Excellent Adviser of Student’s Class, by Tsinghua University, 2003
High-Education Teaching Achievement Award, by Beijing Municipal Government, second prize, No.4, 2001
Science & Technology Award of Chinese Universities and Colleges, by Ministry of Education, first prize, No.5, 2001
研究领域
Production Systems
Production Planning and Control
Operations Scheduling
Logistics for Production
Digital Manufacturing
Product Development Management
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
期刊论文
Ye Cheng and Dan Zhang (2011). “Assembly Line with Flexible Workstation Boundaries.” Journal of Tsinghua University 51(2): 255-260. (In Chinese, EI: 20111813953270)
Chao Ding, Ye Cheng and Miao He (2007). “Two-Level Genetic Algorithm for Clustered Traveling Salesman Problem with Application in Large-Scale TSPs.” Tsinghua Science and Technology 12(4): 459-465. (In English, EI: 20073010709749)
Ming Yin and Ye Cheng (2007). “Scanning Path Generation Algorithms for Automatic Polishing of Free-Form Surface upon Convex Domain.” Journal of Tsinghua University 47(5): 1452-1455. (In Chinese, EI: 20072810697479)
Shengdong Wang, Ye Cheng and Ming Yu (2006). “Simulation of Dynamic Scheduling of Locomotives for Passenger Transportation.” Railway Transportation and Economics 28(7): 70-72. (In Chinese)
Na Liang, Ye Cheng and Ben Zhao (2006). “Research on Fast and Automated Process Planning of Automobile Final Assembly.” Computer Integrated Manufacturing Systems 12(6): 857-861. (In Chinese, EI: 20063510092484)
Zhansheng Zhang and Ye Cheng (2005). “Study on the Design of Robotized Reconfigurable Fixture for Auto-Body Welding.” Manufacturing Technology & Machine Tool 2005(10): 101-104. (In Chinese)
Li Li, Ye Cheng and Shouhua Yuan (2005). “MES Based Information System for Manufacturing Shop Floor.” Machinery Manufacturing Engineer 2005(4): 130-132. (In Chinese)
Li Li, Ye Cheng and Shouhua Yuan (2005). “Research on Priority Scheduling Algorithm Based on Bottleneck Analysis.” Computer Integrated Manufacturing Systems 11(2): 247-250. (In Chinese, EI: 2005169051597)
Ben Zhao, Ye Cheng, Bopeng Zhang and Hengyu Zhao (2004). “Effects of Automobile Functional Restraint on Final Assembly Process Planning.” Mechanical Science and Technology 23(5): 539-604. (In Chinese)
Li Li, Ye Cheng and Shouhua Yuan (2004). “Study on the Application of MES-Based Information System for the Telecom Cable Production.” Electric Wire & Cable 2004(4): 9-15. (In Chinese)
Shibo Hu and Ye Cheng (2004). “Rapid CNC Polishing for Die Surface.” Manufacturing Technology & Machine Tool 2004(5): 44-46. (In Chinese)
Jiping Yan, Ye Cheng and Beihua Ye (2003). “Dynamic Errors of Virtual-CMM in Fast Probing.” China Mechanical Engineering 14(13): 1136-1120. (In Chinese, EI: 2003347606467)
Ben Zhao, Ye Cheng and Bopeng Zhang (2003). “Automobile Final Assembly Sequence Planning Based on the Partition and Layer Method.” Journal of Tsinghua University 43(11): 1452-1455. (In Chinese, EI: 2004148103113)
Jiping Yan, Ye Cheng, Beihua Ye and Haijing Hu (2003). “Automatic Modeling Technology for Virtual CMM.” Manufacturing Technology & Machine Tool 2003(8): 27-29. (In Chinese)
Thong Ngee Goh, Min Xie, Ye Cheng and Li Zheng (2003). “Improving the Six Sigma Paradigm.” Industrial Engineering and Management 2003(5): 1-6. (In Chinese)
Ben Zhao, Ye Cheng, Kun Wang and Bopeng Zhang (2003). “Design of Simulation System for Assembly Process Planning of Sedan Production Line.” Journal of System Simulation 15(2): 198-201. (In Chinese, EI: 2003147427325)
Minbo Li, Ye Cheng and Ben Zhao (2002). “Collaborative Application Platform for Small and Medium-Sized Enterprise.” Computer Integrated Manufacturing Systems 8(10): 762-765. (In Chinese, EI: 2003027311478)
Haijing Hu, Ye Cheng, Beihua Ye and Changzhi Wang (2002). “Calculating and Analyzing Dynamic Error of Coordinate Measuring Machine for Rapid Detection.” Manufacturing Technology & Machine Tool 2002(9): 36-38. (In Chinese)
Qingsong Yu, Ye Cheng and Shibo Hu (2002). “Research on CNC Lapping and Polishing Technology for Die & Mold’s Profiles.” Manufacturing Technology & Machine Tool 2002(8): 44-45. (In Chinese)
Ben Zhao, Ye Cheng and Kun Wang (2002). “Constant Torque Wrench Which Can Record Fastening Information.” Tool Engineering 36(7): 31-33. (In Chinese)
Hongjie Jiao, Huiyu Xiang and Ye Cheng (2002). “Study on the Surface Quality Measuring Method for Auto Panel Parts.” Automobile Science and Technology 2002(6): 37-40. (In Chinese)
Hongjie Jiao, Huiyu Xiang, Ye Cheng and Kun Wang (2002). “The Development of Portable Car Body Contour Measuring Instrument.” Machine Design and Manufacturing Engineering 31(6): 106-110. (In Chinese)
Xianfa Yan, Beihua Ye, Ye Cheng and Jiaqiu Xu (2002). “Research and Development of a Real-Time Terminal Display System in Automobile Final Assembly Line.” Machinery Design & Manufacture 2002(6): 32-34. (In Chinese)
Ben Zhao, Ye Cheng, Kun Wang, Fang Ren, Kun Ma and Jian Fang (2002). “Design of Automobile Assembly Quality Control System with Wireless Remote Control Technology.” Machine Design and Manufacturing Engineering 31(5): 79-81. (In Chinese)
Jiping Yan, Ye Cheng, Beihua Ye, Haijing Hu and Ben Zhao (2002). “Automated Analyzing in Virtual Coordinate Measuring Machine.” Machinery Design & Manufacture 2002(5): 41-42. (In Chinese)
Kun Wang, Ye Cheng, Ben Zhao, Na Liang, Hengyu Zhao and Yonghui Wang (2002). “Research on Task Planning System of Automobile Assembly Process Designing.” Machinery Design & Manufacture 2002(5): 21-22. (In Chinese)
Ben Zhao, Ye Cheng and Kun Wang (2002). “Design of Signal Collection and Feedback Apparatus for Successful Fastening of Torque Wrench.” Measurement Technique 2002(5): 10-11. (In Chinese)
Minbo Li, Ye Cheng, Bopeng Zhang and Fuzhi Cai (2001). “Web-Based Distributed Design Method of Fixture Scheme.” China Mechanical Engineering 12(9): 1011-1014. (In Chinese)
Minbo Li, Ye Cheng, Ben Zhao and Bopeng Zhang (2001). “Agile Fixture Design System for Product Concurrent Design.” Computer Integrated Manufacturing Systems 7(8): 44-48. (In Chinese, EI: 2002096871533)
Ben Zhao, Ye Cheng, Beihua Ye, Gang Xing, Fang Ren, Kun Ma and Jian Fang (2001). “The Design and Development of Real-Time Quality Statistic and Control System for Automobile Final Assembly Line.” Machinery Design & Manufacture, 2001(6): 26-27. (In Chinese)
专著
Ye Cheng and Li Zheng. New Rules for Running Production Lines in Shoemaking Industry. In: Manufacturing Productivity in China, Li Zheng, Simin Huang and Zhihai Zhang (ed.), Boca Raton: CRC Press, Taylor & Francis Group, 2016.
Ye Cheng. Quality Control System in Flexible Manufacturing System. In Peizhong Zhang (ed.) Flexible Manufacturing System, Beijing: Press of Machinery Industry, 1998. (In Chinese)
Ye Cheng. Automation System in Mechanical Manufacturing. In Handbook of Mechanical Engineering (Second Edition), Press of Machinery Industry, China, 1997. (In Chinese)
Ye Cheng. Computer Integrated Manufacturing System. In Zhengxin Yang (ed.) Integrated Mechanical-Electronic System, Beijing: Press of Science and Technology Literature, 1996. (In Chinese)
京公网安备 11010802027423号