李炳燃 - 清华大学 - 机械工程系

个人简介

教育背景 2015.09-2020.06 清华大学博士 2011.09-2015.06 山东大学学士工作履历 2022.08-至今清华大学机械工程系助理研究员 2020.07-2022.07 清华大学机械工程系博士后

研究领域

智能数控系统技术研究内容：国产高档五轴高档数控系统航空航天复杂结构高精高效数控加工国产高端放疗装备控制

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Gong Z , Li B* , Zhang H , et al. Tool orientation optimization method based on ruled surface using genetic algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2021. Jiang J* , Li B , Lin F , et al. Prediction and compensation strategy of contour error in multi-axis motion system[J]. Springer London, 2021. Zhang C, Li B*, Ye P, et al. Analog-Hall-Sensor-Based Position Detection Method With Temperature Compensation for Permanent-Magnet Linear Motor[J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1-11. Zhang C, Li B*, Ye P, et al. Analysis and Compensation of Hall Sensor-Based Position Detection Errors in TPMSLM[J]. IEEE Sensors Journal, 2021, 21(20): 22612-22622. Zhang C, Li B*, Zhang H, et al. Sensorless Control of Tubular Permanent magnet synchronous Linear Motor Considering the End Effect[C]//2021 IEEE 5th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2021, 5: 999-1004. Zhang L*, Li B, Zhang C, et al. Optimization of Permanent Magnet Structure Parameters in Tubular Permanent Magnet Synchronous Linear Motor for HF Square-Wave Injection Sensorless Algorithm[C]//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2021, 85437: V007T07A049. Xiao J, Li B*, Fang J, et al. Efficient Feedrate Optimization Method for Spline Toolpath Based on Typical Characteristics of Integral Impeller[C]//ASME International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021, 85567: V02BT02A054. Jiang J*, Lin F, Li B, et al. A Two-step Tuning Method of Control Parameters for Permanent Magnet Synchronous Linear Motor[C]//2021 IEEE 5th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2021, 5: 1029-1034. Li B, Zhang H, Ye P*, et al. Trajectory smoothing method using reinforcement learning for computer numerical control machine tools[J]. Robotics and Computer-Integrated Manufacturing, 2020, 61: 101847. Wu J*, Li B, Zhang H, et al. Research on Adaptive Feedrate Planning of NURBS Curves for CNC System[C]//2019 2nd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM). IEEE, 2019: 645-652. Li B*, Zhang H, Ye P. Error constraint optimization for corner smoothing algorithms in high-speed CNC machine tools[J]. The International Journal of Advanced Manufacturing Technology, 2018, 99(1): 635-646. Li B*, Zhang H, Ye P. Driving force constraint corner smoothing method for high-speed machine tools[C]//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017, 58202: V006T10A012. 李炳燃*, 张辉, 叶佩青. 永磁同步直线电机霍尔位置检测传感器的优化[J]. 中国机械工程, 2017, 28(024):2913-2918. 李炳燃, 张辉, 叶佩青*. 智能制造环境下的数控系统发展需求*[J]. 航空制造技术, 2017, 60(6):24-30.