近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
部分英文期刊论文
Zhu JE, Xia Y, Zhou Q, Wierzbicki T. A Rate-Dependent Model for Metals Based on a Master Curve of Normalized Hardening Behavior of DP Steels. Journal of Dynamic Behavior of Materials, 2016, 2(2): 1-11.
Jiang XQ, Luo HL, Xia Y, Zhou Q. Mechanical Behavior of Lithium-Ion Battery Component Materials and Error Sources Analysis for Test Results. SAE International Journal of Materials and Manufacturing, 2016, 9(3):614-621.
Tang JS, Zhou Q, Nie BB, Kitagawa Y. Influence of Pre-impact Pedestrian Posture on Lower Extremity Kinematics in Vehicle Collisions. SAE International Journal of Transportation Safety, 2016, 4(2): 278-288.
Meng Y, Xia Y, Zhou Q, Lin ST. Identification of True Stress-Strain Curve of Thermoplastic Polymers under Biaxial Tension. SAE International Journal of Materials and Manufacturing, 2016, 9(3):768-775.
Xia Y, Zhu JE, Wang K, Zhou Q. Design and Verification of a Strain Gauge Based Load Sensor for Medium-speed Dynamic Tests with a Hydraulic Test Machine. International Journal of Impact Engineering, 2016, Vol. 88: 139-152.
Huang Y, Zhou Q, Zhang XW, Wang C. Optimization Study of Occupant Restraint System Concerning Variations in Occupant Size and Crash Severity in Frontal Collisions. International Journal of Vehicle Safety, 4: 299-313, 2015.
Ji PJ, Zhou Q. Influence of School Bus Seat Spacing on Crash Protection of Six-year Olds. International Journal of Vehicle Safety, 2015, 8:115-128.
Xia Y, Zhu JE, Zhou Q. Verification of a Multiple-machine Program for Material Testing from Quasi-static to High Strain-rate. International Journal of Impact Engineering, 2015, Vol. 86: 284-294.
Yao L, Xia Y, Zhou Q. A Study on Hygrothermal Degradation and Recovery of an Epoxy Adhesive Using Molecular Dynamics Simulation. Journal of Adhesion Science and Technology, 2015, Vol. 29: 753-766.
Zhang F, Yang X, Xia Y, Zhou Q, Wang HP, Yu TX. Experimental Study of Strain Rate Effects on the Strength of Adhesively Bonded Joints After Hygrothermal Exposure. International Journal of Adhesion & Adhesives, 2015, Vol. 56: 3–12.
Zhu JE, Xia Y, Luo HL, Gu GY, Zhou Q. Influence of Flow Rule and Calibration Approach on Plasticity Characterization of Dp780 Steel Sheets Using Hill48 Model. International Journal of Mechanical Sciences, 2014, 89:148-157.
Nie BB, Xia Y, Zhou Q, Huang J, Deng B, Neal M. A Response-surface-based Tool for Vehicle Front-end Design for Pedestrian Impact Protection Using Human Body Model. International Journal of Vehicle Design, 2014, 66: 347-362.
Yang X, Yao L, Xia Y, Zhou Q. Effect of Base Steels on Mechanical Behavior of Adhesive Joints with Dissimilar Steel Substrates. International Journal of Adhesion and Adhesives, 2014, 51:42-53.
Zhou Q, Wu XY, Xia Y, Cai W. Spot Weld Layout Optimization of Tube Crash Performance with Manufacturing Constraints. Journal of Manufacturing Science and Engineering, 2014, February, Vol. 136.
Nie BB, Zhou Q, Xia Y, Tang JS. Influence of Feature Lines of Vehicle Hood Styling on Headform Kinematics and Injury Evaluation in Car-to-pedestrian Impact Simulations. SAE International Journal of Transportation Safety, 2014, 2:182-189.
Hong W, Fan HL, Xia Z, Jin F, Zhou Q, Fang D. Axial Crushing Behaviors of Multi-cell Tubes with Triangular Lattices, International Journal of Impact Engineering, 2014, 63:106-117.
Zhang F, Wang HP, Hicks C, Yang X, Carlson BE, Zhou Q. Experimental Study of Initial Strengths and Hygrothermal Degradation of Adhesive Joints between Thin Aluminum and Steel Substrates. International Journal of Adhesion and Adhesives, 2013, 43:14-25.
Zhang F, Yang X, Wang HP, Zhang XW, Xia Y, Zhou Q. Durability of Adhesively-bonded Single Lap–shear Joints in Accelerated Hygrothermal Exposure for Automotive Applications. International Journal of Adhesion and Adhesives, 2013, 44:130-137.
Nie BB, Xia Y, Zhou Q, Huang J, Deng B, Neal M. Response Surface Generation for Kinematics and Injury Prediction in Pedestrian Impact Simulations. SAE International Journal of Transportation Safety, 1(2): 286-296. DOI:10.4271/2013-01-0216
Huang J, Xia Y, Nie BB, Zhou Q. A Bumper Model with Dynamic Contact Stiffness for Pedestrian Legform Impact Simulation. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2013,227(6): 1-9.
Lai XH, Ma CS, Hu JW, Zhou Q. Impact Direction Effect on Serious-to-fatal Injuries Among Drivers in Near-side Collisions According to Impact Location: Focus on Thoracic Injuries. Accident Analysis and Prevention, 2012, 48:442-450.
Yang X, Xia Y, Zhou Q, Wang PC, Wang K. Modeling of High Strength Steel Joints Bonded with Toughened Adhesive for Vehicle Crash Simulations. International Journal of Adhesion and Adhesives, 2012, 39:21-32.
Gu GY, Lin ST, Xia Y, Zhou Q. Experimental Study on Influence of Section Thickness on Mechanical Behavior. Materials and Design, 2012, 38: 124-132.
Lai XH, Xia Y, Wu XY, Zhou Q. An Experimental Method for Characterizing Friction Properties of Sheet Metal Under High Contact Pressure. Wear, 2012, 289:82–94.
Gu GY, Xia Y, Zhou Q. On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing. Thin-Walled Structure, 2012, 55:85-95.
Wu XY, Xia Y, Zhou Q. Influence of Flange Location on Axial Deformation Stability of Double-Hat Structure. Journal of Beijing Institute of Technology, 2012, 21(1):41-49.
Nie BB, Huang J, Xia Y, Zhou Q. Influencing Factors of Contact Force Distribution in Pedestrian Upper Legform Impact with Vehicle Front-End. SAE International Journal of Passenger Cars - Mechanical Systems 5(1): 231-241, doi:10.4271/2012-01-0272.
Huang J, Xia Y, Nie BB, Zhou Q. Estimation of Energy-Absorption Space for Pedestrian Leg Protection of Car Font-End Structures. International Journal of Vehicle Design, 2012, 60(1/2): 20-38.
Yang X, Xia Y, Zhou Q. Influence of Stress Softening on Energy-absorption Capability of Polymeric Foams. Materials and Design. 2011, 32(3):1167-1176.
Luo M, Zhou Q. A Vehicle Seat Design Concept for Reducing Whiplash Injury Risk in Low-speed Rear Impact. International Journal of Crashworthiness, 2011, 15:293-311.
Yang X, Xia Y, Zhou Q. A Simplified Fe Model for Pull-out Failure of Spot Welds. Engineering Fracture Mechanics, 2010, 77:1224-1239.
Tang L, Wang YB, Zhou Q. The Effect of Constrained Hip-joint Design on Crash Dummy Responses. International Journal of Crashworthiness. 2010, 15 (4):369-376.
Fan HL, Zhou Q, Yang W, Zheng JJ. An Experiment Study on the Failure Mechanisms of Woven Textile Sandwich Panels under Quasi-static Loading. Composites Part B: Engineering, 2010, 41(8):686-692.
Liu Q, Xia Y, Zhou Q. Friction Effects in Pedestrian Headform Impacts with Engine Hoods. Tsinghua Science and Technology, 2009, 14 (5): 631-638.
Xia Y, Zhou Q, Wang PC, Johnson NL, Gayden XQ and Fickes JD. Development of High Efficiency Modeling Technique for Weld-bonded Steel Joints in Vehicle Structures, Part I: Static Experiments and Simulations. International Journal of Adhesion and Adhesives, 2009, 29: 414-426.
Xia Y, Zhou Q, Wang PC, Johnson NL, Gayden XQ and Fickes JD. Development of High Efficiency Modeling Technique for Weld-bonded Steel Joints in Vehicle Structures, Part II: Dynamic Experiments and Simulations. International Journal of Adhesion and Adhesives, 2009, 29: 427-433.
Xia Y, Yang X, Zhou Q. Effect of Stress Softening in Bumper Foams on the Low Speed Impact Performance of Vehicles. SAE International Journal of Materials and Manufacturing, 2009, 1(1): 548-553.
Yuan Q, Li YB, Zhou Q. Statistical Analysis of Pedestrian – Vehicle Impact Characteristics of Passenger-car-to-pedestrian Accidents in Beijing China. International Journal of Vehicle Safety, 2007, 2(3): 334-344.
Yu HL, Zhou Q, Neat GW. Three-dimensional Finite Element Modeling of the Torso of the Anthropomorphic Test Device THOR. International Journal of Vehicle Safety, 2007, 1(2):116-140.
Zhang F, Wang DZ, Zhou Q, Zhang JH, Wang CB, Zhang Y, Bai SF, Liang YP. Finite Element Modeling of Impact Between Bus and Roadside Guardrail. Journal of Hunan University, 2006, 33(3):103-107.
Tang L, Luo M, Zhou Q. Optimization of a Child Restraint System by Using a Particle Swarm Algorithm. Computational Intelligence and Bioinformatics, 2006, 4115:137-144.
Mayer R, Webb S, Wang JT, Liu B, and Zhou Q. Sled Tests and Simulations of Offset Deformable Barrier. International Journal of Vehicle Safety, 2005, 1: 238-251.
Zhou Q, Yu TX. Use High-Efficiency Energy Absorbing Device to Arrest Progressive Collapse of Tall Building. Journal of Engineering Mechanics, ASCE Transaction, 2004, 130:1177-1187.
Yu HL, Medri MB, Zhou Q, DiMasi FP, Bandak FA. Head–neck Finite Element Model of the Crash Test Dummy THOR. International Journal of Crashworthiness, 2004, 9:175-186.
Zhou Q, Mayer R. Characterization of Aluminum Honeycomb Material Failure in Large Deformation Compression, Shear, and Tearing. Journal of Engineering Materials and Technology, Transactions of the ASME, 2002, 124: 412-420.
Zhou Q, Wierzbicki T. An Incremental Analysis of Plane Strain Fully Plastic Crack Growth in Strain-hardening Materials Under Extension. International Journal of Fracture, 1996, 79:27-48.
Zhou Q, Wierzbicki T. A Tension Zone Model of Blanking and Tearing of Ductile Metal Plates. International Journal of Mechanical Sciences, 1996, 38:303-324.
McClintock FA, Zhou Q, Wierzbicki T. Necking in Plane Strain Under Bending With Constant Tension. Journal of the Mechanics and Physics of Solids, 1993, 41:1327-1343.
Zhou Q, Zhang TG, Yu TX. A Note on Determining the Initial Velocity of a Modal Field. Journal of Applied Mechanics, 1992, 59:677-679.
Zhou Q, Yu TX. Lee's Extremum Principle and the Large Deflection Response of Dynamically Loaded Plastic Structures. Acta Mechanica Solida Sinica, 1991, 4:369-379.
Zhou Q, Yu TX, Huang ZP. The Large Deflection of a Rigid-perfectly Plasticity Portal Frame Subjected to Impulsive Loading. International Journal of Solids and Structures, 1990, 26:1225-1242.
Yu TX, Zhang DJ, Zhang Y, Zhou Q. A Study of the Quasi-static Tearing of Thin Metal Sheets. International Journal of Mechanical Sciences, 1988, 30:193-202.
Zhou Q, Wang MZ. A Discussion on Representing General Solution of Equations in Theory of Elasticity by Harmonic Functions. Applied Mathematics and Mechanics, 1987, 8:1099-1101.
部分英文会议论文
Ji PJ, Zhou Q. Preliminary Study of Uniform Restraint Concept for Protection at Wider Range of Impact Severity. SAE 2016-01-1528, 2016 SAE Congress, Detroit, USA.
Li W, Zhu JE, Xia Y, Zhou Q. Testing and Modeling the Effect of Strain-rate on Plastic Anisotropy for a Traditional High Strength Steel. ASME 2015, IMECE2015-53270, Houston, Texas, USA. November 2015.
Luo HL, Jiang XQ, Xia Y, Zhou Q. Fracture Mode Analysis of Lithium-ion Battery Under Mechanical Loading. ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE2015-52595, Houston, Texas, USA.
Zhang SA, Zhou Q, Xia Y. Influence of Wheels on Frontal Crash Response of Small Lightweight Electric Vehicle. ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE2015-50699, Houston, Texas, USA.
Zhang SA, Zhou Q, Xia Y. Influence of Mass Distribution of Battery and Occupant on Crash Response of Small Lightweight Electric Vehicle. SAE 2015-01-0575, 2015 SAE Congress, Detroit, USA.
Zhu JE, Xia Y, Gu GY, Zhou Q. Extension of Non-associated Hill48 Model for Characterizing Dynamic Mechanical Behavior of a Typical High-strength Steel Sheet. ASME 2014, IMECE 2014-36985, Montreal, Quebec, Canada. 2014.
Zeng L, Xia Y, Zhao H, Zhou Q. On Utilization of Material Failure Criterion in Modeling Pull-out Failure of Spot-welded Joints. ASME 2013, IMECE 2013-62536, San Diego, California, USA. 2013.
Gu GY, Lin ST, Xia Y, Zhou Q, Lin CH. Characterization of Mechanical Behavior of Thermoplastics with Local Deformation Measurement. SAE 2012-01-0040, 2012 SAE Congress, Detroit, USA. 2012 SAE Transactions.
Nie BB, Huang J, Xia Y, Zhou Q. Influencing Factors of Contact Force Distribution in Pedestrian Upper Legform Impact with Vehicle Front-End. SAE 2012-01-0272, 2012 SAE Congress, Detroit, USA. 2012 SAE Transactions.
Gu GY, Lin ST, Meng Y, Xia Y, Zhou Q. Influence of Strain Rate and Stress State on the Mechanical Behavior of Die-Casting AM60 Magnesium Alloy. ASME 2011, IMECE 2011-65196, Denver, Colorado, USA. November 2011.
Zhang F, Wang HP, Hicks C, Carlson BE, Yang X, Zhou Q. Effect of Prelube, Surface Coating and Substrate Materials on Initial Strength of Adhesive Joints between Al Alloy and Steels, ASME 2011, IMECE 2011-62577, Denver, Colorado, USA. November 2011.
Huang J, Nie BB, Zeng L, Xia Y, Zhou Q. Development of a Legform Impactor with 4-DOF Knee-Joint for Pedestrian Safety Assessment in Omni-Direction Impacts. SAE 2011-01-0085, 2011 SAE Congress, Detroit, USA.
Nie BB, Xia Y, Huang J, Zhou Q. A Simplified Model of Pedestrian Upper Legform Impact for Estimate of Energy-Absorption Space underneath Bonnet Lead. ESV 2011, Paper Number 11-0014, Washington, DC. USA. 2011.
Lai XH, Wang YN, Zhou Q, Lin Z, Culiere P. Development of a Finite Element PAM-CRASH Model of Hybrid III Anthropomorphic Test Device with High Fidelity, ESV 2011, Paper Number 11-0031, Washington, DC. USA. 2011.
Wu XY, Xia Y, Zhou Q, Cai W, Tilove RB. Spot Weld Layout Optimization with Manufacturing Constraints for Vehicle Structural Performance. ASME 2010, IMECE2010-40376, Vancouver, British Columbia, Canada. November 2010.
Lai XH, Zhou Q. Study of Pre-Stress Effect of Ribcage Structure on Chest Response of Crash Dummy Model. ASME 2010, IMECE2010-37982, Vancouver, British Columbia, Canada. November 2010.
Tang L and Zhou Q. A Theoretical Study of Submarining Tendency of a Hybrid III 5th Percentile Female Dummy. ASME 2009, IMECE2009-12567. Lake Buena Vista, Florida, USA. November 2009.
Liu Q, Xia Y, Zhou Q, Wang JT. Design Analysis of a Sandwich Hood Structure for Pedestrian Protection. 21st International Technical Conference on the Enhanced Safety of Vehicles. Paper Number 09-0356-W. Stuttgart, Germany. 15-18 June 2009.
Wang C, Zhou Q. Concept Study of Adaptive Seatbelt Load Limiter Using Magnetorheological Fluid. 21st International Technical Conference on the Enhanced Safety of Vehicles. Paper Number 09-0081-W. Stuttgart, Germany. 15-18 June 2009.
Zhou Q, Quade M, Du H. Concept Design of a 4-DOF Pedestrian Legform. The 20th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Lyon, France. June 18-21, 2007.
Wang J-T, Xia Y, Zhou Q, Zhang J-H. Simulation of Spot Weld Pullout by Modeling Failure around Nugget. SAE Paper No. 2006-01-0532, SAE 2006 World Congress & Exhibition, Detroit, USA. April 2006.
Wang JT, Zhou Q. A Seat Belt Buckle Pretensioner and Load-Limiter Combo Device. 18th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Paper No. 144, Nagoya, Japan. May 19-22, 2003.
Zhou Q, Yu HL, Medri MB, DiMasi F. Finite Element Model of Thor Dummy Lower Leg. 2002 ASME Congress, IMECE2002-39171, New Orleans, Louisiana, USA. November 2002.
Zhou Q, Thomas M, Stibich AM. An Analytical Study of System Variables for Meeting FMVSS 201 Head Impact Requirements. 1998 ASME Congress, Anaheim, California, USA. November 1998.
Zhou Q, Rouhana SW, Melvin JW. Age Effects on Thoracic Injury Tolerance. Proceeding of 40th Stapp Car Crash Conference, SAE 962421, Albuquerque, New Mexico, USA. November 1996.
部分中文期刊论文
黄毅, 姬佩君, 马令晨, 周青. 台车试验碰撞波形离散性及其对儿童约束系统响应影响的研究. 汽车工程, 2016, 38: 440-445.
聂冰冰, 夏勇, 黄俊, 周青, 刘奇, 杜汉斌. 针对行人髋部碰撞保护的汽车前端造型与结构概念设计研究. 汽车工程, 2014, 36(03): 286-292.
赖兴华, 徐辰, 马春生, 周青, 张金换. 具有多方向生物力学逼真特性的碰撞假人胸部集总参数建模. 清华大学学报 (自然科学版), 2014, (06): 750-755.
聂冰冰, 夏勇, 黄俊, 周青, 刘奇, 杜汉斌. 针对行人髋部碰撞保护的汽车前端造型与结构概念设计研究. 汽车工程, 2014, (03): 286-292.
夏勇, 古杰, 周青. 骑车人及行人与汽车碰撞中头部运动学对比与分析. 汽车安全与节能学报, 2014, (02): 159-165.
赖兴华, 赵佳庆, 周青. 冲击载荷下Hybrid Ⅲ假人颈部应力与应变. 汽车安全与节能学报, 2014, (03): 244-251.
唐亮, 吴滔滔, 周青, 邓滨. 儿童乘员的伤害指标及下潜趋势影响因素的研究. 华南理工大学学报. 2011, 40(7):46-50.
黄俊, 夏勇, 周青. 基于汽车前端刚度分析的降低小腿加速度快速设计方法. 汽车工程,2012,(08):679-685+691.
王元博, 夏勇, 景谊明, 黄俊, 周青, 张立玲, 叶子青, 林逸. 考虑行人腿部保护和低速碰撞特性的保险杠系统概念设计. 汽车工程, 2009, 31(12):1111-1115.
黄俊, 刘奇, 聂冰冰, 黄毅, 杜汇良, 夏勇, 周青. 基于EEVC要求的行人碰撞试验台的研制和评估. 汽车工程, 2008, 30(12):1056-1060.
汪凯, 夏勇, 顾功尧, 王元博, 周青. 用于车身材料力学试验的非接触测量系统开发. 汽车工程, 2008, 30(11):1006-1008.
刘奇, 夏勇, 周青. EEVC行人头模块标定试验. 汽车技术（增刊）. 2006, S1:10-12.
武雪原, 夏勇, 周青. 薄壁方管在冲击载荷下的应变及应变率特性. 汽车技术（增刊）2006, S1:19-21.
罗萌, 唐亮, 杜汇良, 周青, 朱跃钢, 许勇锋. 儿童约束系统动态仿真研究及初步参数分析. 汽车技术（增刊）.2006, S1: 36-40.
罗萌, 周青. 座椅设计参数对低速尾撞中乘员颈部伤害影响的仿真研究. 汽车技术（增刊）. 2006, S1:41-45.
林喆, 杜汇良, 周青. 追尾碰撞主动头枕的控制策略研究. 汽车技术（增刊）. 2006, S1:52-54+88.
周青. 2006年美国SAE年会汽车碰撞安全研究进展. 汽车工程, 2006, 28(11): 965-971.
董光, 赵强生, 周青, 张金换. 一种侧撞试验台的方案设计. 汽车技术 , 2006, S1:75-78.
余同希, 周青. 世界贸易中心双子楼的动力坍塌浅析. 力学与实践, 2002, 24(2):71-75.
周青, 余同希. Lee 极值原理与结构的大挠度塑性动力响应. 固体力学学报, 1992, 13(3):207-213.
周青, 王登明, 余同希. 盒形结构在碰撞下的能量吸收能力. 应用力学学报1990, 7(3):51-57.
周青, 余同希. 直角刚架在撞击作用下的塑性大挠度响应. 爆炸与冲击, 1989, 9(2):120-129.
周青, 王敏中. 关于“用调和函数表示弹性理论方程组的一般解”的讨论. 应用力学和数学, 1987, 8(11):1035-1037.
周青, 余同希. 在强动载荷作用下变截面梁中的塑性铰. 爆炸与冲击, 1987, 7(4):311-318.
周青, 余同希. 利用弯杆形状对撑杆跳运动员进行受力分析. 力学与实践, 1987, 9(5):24-26.
京公网安备 11010802027423号