近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
WANG Junying, HE Xiao, WANG Baotong, ZHENG Xinqian. “Shapley Additive Explanations of Multi-Geometrical Variable Coupling Effect in Transonic Compressor.” ASME Journal of Engineering for Gas Turbine and Power, 2022,144(4): 041015.
NIU Zitian, SUN Zhenzhong, WANG Baotong, ZHENG Xinqian. “Effects of Non-Axisymmetric Volute on Rotating Stall in the Vaneless Diffuser of a Centrifugal Compressor.” ASME Journal of Engineering for Gas Turbines and Power, 2022, Accept.
陈颖秀, 郑新前, 侯安平.“转轴偏心对离心压气机喘振边界影响的试验研究.” 航空动力学报, 录用.
ZENG Hanxuan, ZHENG Xinqian, VAHDATI Mehdi. “A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model.” ASME Journal of Engineering for Gas Turbines and Power, 2022, 144(3): 031021.
宋召运, 王宝潼, 范腾博, 郑新前, 冯旭栋. “基于正反问题耦合的压气机特性快速预测方法.” 航空动力学报, 2022,37(03):619-628.
LIN Yun, FAN Tengbo, ZHENG Xinqian.“Roles of Recirculating Bubble on the Performance of Centrifugal Compressors.” Aerospace Science and Technology, 2021, 118: 107073.
ZENG Hanxuan, WANG Baotong, ZOU Wangzhi, ZHENG Xinqian.“Influence of Pressure Pulsations on the Performance of Compression System and Turbocharged Engine.” IMechE Part D: Journal of Automobile Engineering, 2021, 236(5): 927-937
孙振中, 温孟阳, 范腾博, 王宝潼, 郑新前. “特斯拉阀对压气机深度喘振影响研究.” 推进技术, 2021, 1-13
WANG Junying, ZHENG Xinqian. “Review of Geometric Uncertainty Quantification in Gas Turbines.” ASME Journal of Engineering for Gas Turbines and Power, 2020, 142 (7): 070801
ZENG Hanxuan, WANG Baotong, ZHENG Xinqian. “The Role of Shaft-Speed Oscillation on the Instability Behavior of Transonic Radial Compressor.” Aerospace Science and Technology, 2020, 105: 105982
ZHANG Wenchao, HE Xiao, WANG Baotong, SUN Zhenzhong, ZHENG Xinqian. “Stability Improvement of a High-Pressure Ratio Centrifugal Compressor by Flow Injection.” Journal of Aerospace Engineering, 2020, 33(6): 04020072
SUN Zhenzhong, WANG Baotong, ZHENG Xinqian, KAWAKUBO Tomoki, TAMAKI Hideaki, NUMAKURA Ryuusuke. “Effect of Bent Inlet Pipe on the Flow Instability Behavior of Centrifugal Compressors,” Chinese Journal of Aeronautics, 2020, 33(8): 2099-2109.
ZHANG Wenchao, SUN Zhenzhong, WANG Baotong, ZHENG Xinqian. “Influence of Splitter Blades on the Performance of a Single-Stage Centrifugal Compressor with Pressure Ratio 12.0.” ASME Paper No. GT2020-14733, 2020.
NIU Zitian, SUN Zhenzhong, WANG Baotong, ZHENG Xinqian. “Effects of Non-Axisymmetric Volute on Rotating Stall in the Vaneless Diffuser of a Centrifugal Compresso.” ASME Paper No. GT2020-14729, 2020.
ZHU Dengting, SUN Zhenzhong, ZHENG Xinqian.“Turbocharging Strategy among Variable Geometry Turbine, Two-Stage Turbine, and Asymmetric Two-Scroll Turbine for Energy and Emission in Diesel Engines.” IMechE Part A: Journal of Power and Energy, 2020, 234 (7): 900-914.
YANG Heli, ZHENG Xinqian. “Investigation of Endwall Treatment and Shock Control in a Five-Stage Axial Compressor.” IMechE Part G: Journal of Aerospace Engineering, 2020, 234(5): 1035-1049
刘魁, 刘婷, 魏杰, 郑新前.“数字孪生在航空发动机可靠性领域的应用探索.” 航空动力, 2019, 4: 61-64
邹望之, 郑新前. “航空涡轴发动机发展趋势.” 航空动力学报, 2019, 34 (12): 2577-2588
SUN Zhenzhong, ZHENG Xinqian, TAMAKI Hideaki, KANEKO Yuta. “Flow Instability Suppression and Deep Surge Delay by Non-Axisymmetric Vaned Diffuser in a Centrifugal Compressor.” Aerospace Science and Technology, 2019, 95: 105494.
ZHU Dengting, ZHENG Xinqian, “Potential for Energy and Emissions of Asymmetric Twin-Scroll Turbocharged Diesel Engines Combining Inverse Brayton Cycle System,” Energy.2019, 179: 581-592.
HUANG Qiangqiang, ZHANG Meijie, ZHENG Xinqian.“Compressor surge based on a 1D-3D coupled method - Part 2: Surge investigationt,” Aerospace Science and Technology. 2019, 90: 289-298
HUANG Qiangqiang, ZHANG Meijie, ZHENG Xinqian. “Compressor surge based on a 1D-3D coupled method – Part 1: Method establishment,” Aerospace Science and Technology. 2019, 90: 342-356
ZOU Wangzhi, HE Xiao, ZHANG Wenchao, NIU Zitian, ZHENG Xinqian. “Roles of vanes in diffuser on stability of centrifugal compressor,” IMechE Part G：Journal of Aerospace Engineering.2019, 233 (14): 5380-5392
ZHU Dengting, LIN Yun, ZHENG Xinqian.“Strategy on Performance Improvement of Inverse Brayton Cycle System for Energy Recovery in Turbocharged Diesel Engines,” IMechE Part A: Journal of Power and Energy, 2019, 234 (1): 85-95.
ZHU Dengting, ZHENG Xinqian.“Fuel Consumption and Emission Characteristics in Asymmetric Twin-Scroll Turbocharged Diesel Engine with Two Exhaust Gas Recirculation Circuits, Applied Energy, 2019, 238:985-995.
ZHANG Meijie, ZHENG Xinqian, HUANG Qiangqiang, SUN Zhenzhong. “A Novel One-Dimensional- Three-Dimensional Coupled Method to Predict Surge Boundary of Centrifugal Compressors,” ASME Journal of Engineering for Gas Turbines and Power, 2019, 140(7).
ZHANG Meijie, ZHENG Xinqian, SUN Zhenzhong.“Experimental Investigation of the Flow Instability of a Compression System with an Upstream Plenum,” Experimental Thermal and Fluid Science, 2019, 102: 406-420.
HE Xiao, ZHENG Xinqian.“Roles and mechanisms of casing treatment on different scales of flow instability in high pressure ratio centrifugal compressors,” Aerospace Science and Technology, 2019, 84: 734-746.
SUN Zhenzhong, ZHENG Xinqian, LINGHU Zelin, KAWAKUBO Tomoki, TAMAKI Hideaki, WANG Baotong. “Influence of Volute Design on Flow Field Distortion and Flow Stability of Turbocharger Centrifugal Compressors,” IMechE Part D: Journal of Automobile Engineering, 2019, 233 (3): 484-494.
WANG Aolin, ZHENG Xinqian.“Design Criterion for Asymmetric Twin-Entry Radial Turbine for Efficiency under Steady and Pulsating Inlet Conditions,” IMechE Part D: Journal of Automobile Engineering, 2019, 233(8): 2246-2256.
ZHENG Xinqian, LIN Yun, KAWAKUBO Tomoki, TAMAKI Hideaki. “Extension of operating range of a centrifugal compressor by use of a non-axisymmetric diffuser,” IHI Engineering Review, 2018, 51 (1): 43-56.
SHU Mengying, YANG Mingyang, DENG Kangyao, ZHENG Xinqian, MARTINEZ-BOTAS Ricardo, “Performance Analysis of a Centrifugal Compressor Based on Circumferential Flow Distortion Induced by Volute,” ASME Journal of Engineering for Gas Turbines and Power, 2018, 140: 122603-1~11
SUN Zhenzhong, ZOU Wangzhi, ZHENG Xinqian.“Instability Detection of Centrifugal Compressors by Means of Acoustic Measurements” Aerospace Science and Technology, 2018, 82-83: 628-635.
HE Xiao, ZHENG Xinqian. “Flow Instability Evolution in High Pressure Ratio Centrifugal Compressor with Vaned Diffuser,” Experimental Thermal and Fluid Science, 2018, 98, 719-730.
ZHU Dengting, ZHENG Xinqian. “A New Asymmetric Twin-Scroll Turbine with Two Wastegates for Energy Improvements in Diesel Engines.” Applied Energy, 2018, 223: 263–272.
ZHENG Xinqian, LIN Yun, SUN Zhenzhong. “Effects of Volute’s Asymmetry on the Performance of a Turbocharger Centrifugal Compressor,” IMechE Part G: Journal of Aerospace Engineering, 2018, Online, DOI: 10.1177/0954410016670418
ZHENG Xinqian, SUN Zhenzhong, KAWAKUBO Tomoki, TAMAKI Hideaki, “Stability Improvement of a Turbocharger Centrifugal Compressor by Non-Axisymmetric Vaned Diffuser,” ASME Journal of Turbomachinery, 2018, 140 (4): 041007-1~13
SUN Zhenzhong, ZHENG Xinqian, KAWAKUBO Tomoki, “Experimental Investigation of Instability Inducement and Mechanism of Centrifugal Compressors with Vaned Diffuser,” Applied thermal Engineering, 2018, 133: 464-471
ZHANG Meijie, ZHENG Xinqian, “Criteria for the Matching of Inlet and Outlet Distortions in Centrifugal Compressors,” Applied Thermal Engineering, 2018, 131: 933–946.
HE Xiao, ZHENG Xinqian, “Performance Improvement of Transonic Centrifugal Compressors by Optimization of Complex Three-Dimensional Features,” IMechE Part G: Journal of Aerospace Engineering, 2017, 231 (14): 2723-2738
ZHU Dengting, ZHENG Xinqian, “Asymmetric Twin-Scroll Turbocharging in Diesel Engines for Energy and Emission Improvement,” Energy, 2017, 141: 702-714
He Xiao, Zheng Xinqian, “Mechanisms of Sweep on the Performance of Transonic Centrifugal Compressor Impellers,” Applied Sciences, 2017, 7, 1081: 1-22.
Huang Qiangqiang and Zheng Xinqian. "Potential of Variable-Geometry Method for Compressor Range Extension for Turbocharged Engines." Journal of Propulsion and Power (2017): 1-10.
Zheng Xinqian, Liu Anxiong, and Sun Zhenzhong. "Investigation of the instability mechanisms in a turbocharger centrifugal compressor with a vaneless diffuser by means of unsteady simulations." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231.11 (2017): 1558-1567.
Li Zhihui and Zheng Xinqian. "Review of design optimization methods for turbomachinery aerodynamics." Progress in Aerospace Sciences 93 (2017): 1-23.
Hosseini, Mohammadjavad, Sun Zhenzhong, He Xiao, Zheng Xinqian. "Effects of Radial Gap Ratio between Impeller and Vaned Diffuser on Performance of Centrifugal Compressors." Applied Sciences 7.7 (2017): 728.
Ebrahimi Mohsen, Huang Qiangqiang, He Xiao, Zheng Xinqian. "Effects of Variable Diffuser Vanes on Performance of a Centrifugal Compressor with Pressure Ratio of 8.0." Energies 10.5 (2017): 682.
Moosania Seyed Mostafa and Zheng Xinqian.“Comparison of Cooling Different Parts in a High Pressure Ratio Centrifugal Compressor,” Applied Sciences, 2017, 7 (16): 1-13.
Zheng Xinqian, Sun Zhenzhong, Tomoki kawakubo et al. "Experimental investigation of surge and stall in a turbocharger centrifugal compressor with a vaned diffuser." Experimental Thermal & Fluid Science 82(2017):493-506.
Sun Zhenzhong, Zheng Xinqian and Linghu Zelin. "Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors."Journal of Applied Fluid Mechanics, Vol. 10, No. 1, pp. 143-155, 2017
Zheng Xinqian and Yang Heli. "End-Wall Boundary Layers and Blockages of Multistage Axial Compressors Under Different Conditions." Journal of Propulsion and Power Vol. 33, No. 4, July–August 2017
Zheng Xinqian and Li Zhihui."Blade-end treatment to improve the performance of axial compressors: An overview." Progress in Aerospace Sciences 88(2017)1-14
Moosania Seyed Mostafa and Zheng Xinqian. "Effect of internal heat leakage on the performance of a high pressure ratio centrifugal compressor." Applied Thermal Engineering 111(2017):317-324.
Huang, Qiangqiang and Zheng Xinqian. "Potential of variable diffuser vanes for extending the operating range of compressors and for improving the torque performance of turbocharged engines." Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering (2017).
Saeed Mirzaee, Zheng Xinqian, Lin Yun. "Improvement in the stability of a turbocharger centrifugal compressor by tip leakage control." Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering 231.5(2017).
Zheng Xinqian,Ding Chuang and Zhang Yangjun "Influence of different loads on the stresses of multistage axial compressor rotors." Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering 231.5(2017).
Moosania Seyed Mostafa and Zheng Xinqian. "Performance improvement of a high pressure ratio centrifugal compressor by integrated cooling." Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering 230.12(2016).
Li Zhihui, Zheng Xinqian, Liu Yangming, et al. "The effect of end wall boundary layer on matching and corresponding flow control technique for multistage axial compressor." Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering 230(2016).
Zheng Xinqian and Ding Chuang "Effect of temperature and pressure on stress of impeller in axial-centrifugal combined compressor." Advances in Mechanical Engineering 8.6(2016).
郭龙凯, 刘艳明, 郑新前 et al." 混合型前缘掠对离心压气机气动性能的影响."内燃机学报, 2016(3):281-287.
He Xiao, Zheng Xinqian, Wei Jie and et al. "Investigation of vaned diffuser splitters on the performance and flow control of a high pressure ratio centrifugal compressor." ASME Paper No. GT2016-56255
Huang Qiangqiang, Zheng Xinqian and Wang Aolin. "Mechanism and Flow Control on The Mismatching of Impeller and Vaned Diffuser Caused by Inlet Prewhirl for Centrifugal Compressors." ASME Paper No. GT2016-56244
Zheng Xinqian, and Yang Heli. "Influence of Tip Clearance on the Performance and Matching of Multistage Axial Compressors." ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition GT2016-56232
Zheng Xinqian, Huang Qiangqiang, and Liu Anxiong. "Loss Mechanisms and Flow Control for Improved Efficiency of a Centrifugal Compressor at High Inlet Prewhirl." Journal of Turbomachinery 138.10 (2016): 101011.
He Xiao and Zheng Xinqian. "Mechanisms of Lean on the Performance of Transonic Centrifugal Compressor Impellers." Journal of Propulsion and Power (2016): 1-10.
Yang Mingyang, Martines botas Ricardob, DengKangyao, Zheng Xinqian and et al. "Unsteady influence of Self Recirculation Casing Treatment (SRCT) on high pressure ratio centrifugal compressor." International Journal of Heat & Fluid Flow 58(2016):19-29.
Yang Mingyang, Ricardo Martinez-Botas, Zhang Yangjun and et al. "Effect of Self-Recirculation-Casing Treatment on High Pressure Ratio Centrifugal Compressor." Journal of Propulsion and Power 32.3(2016):1-9.
Moosania Seyed Mostafa, and Zheng Xinqian. "Performance improvement of a high pressure ratio centrifugal compressor by integrated cooling." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering (2015): 0954410015622964.
Li Zhihui, Zheng Xinqian, Liu Yanming and et al. "The effect of end wall boundary layer on matching and corresponding flow control technique for multistage axial compressor." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering (2015): 0954410015621928.
刘艳明, 崔庆, 郑新前 et al. "具有前缘前掠叶片的跨音速离心压气机流场的数值研究." 汽车安全与节能学报 6.04 (2015): 392-398.
Linghu Zelin, Zhao Chenjia, Yang Heng, et al. "Beetle wing folding facilitated by micro-protrusions on the body surface: a case of Allomyrina dichotoma." Science Bulletin 60.16 (2015): 1457-1460.
Zheng Xinqian and Liu Anxiong. "Experimental Investigation of Surge and Stall in a High-Speed Centrifugal Compressor." Journal of Propulsion and Power 31.3 (2015): 815-825.
Zheng Xinqian and Huang Qiangqiang. "Potential of the range extension of compressors with a variable inlet prewhirl for automotive turbocharged engines with an ultra-high-power density." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229.14 (2015): 1959-1968.
Zheng Xinqian and Liu Anxiong. "Phenomenon and Mechanism of Two-Regime-Surge in a Centrifugal Compressor." Journal of Turbomachinery 137.8 (2015): 081007.
Zheng Xinqian, Huang Qiangqiang, and Liu Anxiong. "Loss Mechanisms and Flow Control for Improved Efficiency of a Centrifugal Compressor at High Inlet Prewhirl." ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015.
汪陈芳, 张扬军，郑新前，et al. "离心压气机进气流场研究及控制." 航空动力学报 29.11 (2014): 2587-2592.
Wang Chenfang, Zhang Yangjun, Zheng Xinqian, and et al. "Off-Design Analysis and Flow Control of Centrifugal Compressor for Vehicle Engine Turbocharger." ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014.
Lu Hanan, Zheng Xinqian, and Li Qiushi. "A combinatorial optimization design method applied to S-shaped compressor transition duct design." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering (2014): 0954410014531922.
Yang Dong, Zheng Xinqian, and Li Qiushi. "An 11-stage axial compressor performance simulation considering the change of tip clearance in different operating conditions." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy (2014): 0957650914535389.
Zheng Xinqian, Jin Lei, and Hideaki Tamaki. "Influence of volute-induced distortion on the performance of a high-pressure-ratio centrifugal compressor with a vaneless diffuser for turbocharger applications." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 228.4 (2014): 440-450.
Zheng Xinqian, and Lan Chuanjie. "Improvement in the performance of a high-pressure-ratio turbocharger centrifugal compressor by blade bowing and self-recirculation casing treatment." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 228.1 (2014): 73-84.
Shan Shujun, Hou Anping, Zheng Xinqian, et al. "Influence of the Aerodynamic Vibration Excitation on the Turbine Blade Vibration in a Vehicle Turbocharger." ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013.
Song Binyang, Zhuge Weilin, Zhao Rongchao, et al. "An investigation on the performance of a Brayton cycle waste heat recovery system for turbocharged diesel engines." Journal of Mechanical Science and Technology 27.6 (2013): 1721-1729.
Zhang, Yangjun, Wang Chenfang, Zheng Xinqian, et al. "Adaptive flow optimization of a turbocharger compressor to improve engine low speed performance." Journal of Mechanical Science and Technology 27.6 (2013): 1581-1587.
Tamaki Hideaki, Masaru Unno, Zheng Xinqian, et al. "Effect of Circumferential Static Pressure Non-Uniformity Caused by a Volute on Flow in High Pressure Ratio Centrifugal Compressor With Vaneless and Vaned Diffuser." ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013.
Zheng Xinqian, Lin Yun, Zhuge Weilin, et al. "Stability improvement of turbocharger centrifugal compressor by asymmetric vaneless diffuser treatment." ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013.
Chen Jinke, Zhuge Weilin, Zheng Xinqian, et al. "Investigation of influence of two-stage turbocharging system on engine performance using a pre-design model." ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013.
Zhao Rongchao, Zhuge Weilin, Zheng Xinqian, et al. "Design of Counter-Rotating Turbine to Improve the Off-Design Performance of Turbo-Compounding Systems." ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013.
Zhang Lei, Zhuge Weilin, Zheng Xinqian, et al. "The influence of working fluid characteristic parameters on turbine performance for the small scale ORC system." ASME 2013 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2013.
Song Binyang, Zhuge Weilin, Zheng Xinqian, et al. "Parameter Study of a Brayton Cycle Waste Heat Recovery System for Turbocharged Diesel Engines." ASME 2013 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2013.
Liu Anxiong and Zheng Xinqian. "Methods of surge point judgment for compressor experiments." Experimental Thermal and Fluid Science 51 (2013): 204-213.
Zheng Xinqian, Lei Jin, and Hideaki Tamaki. "Influence of volute distortion on the performance of turbocharger centrifugal compressor with vane diffuser." Science China Technological Sciences 56.11 (2013): 2778-2786.
Zheng Xinqian, Lin Yun, Gan Binlin, et al. "Effects of Reynolds number on the performance of a high pressure-ratio turbocharger compressor." Science China Technological Sciences 56.6 (2013): 1361-1369.
Zheng Xinqian and Lan ChuanJie. "Effects of blade bowing on the performance of a high pressure-ratio turbocharger centrifugal compressor with self-recirculation casing treatment." Science China Technological Sciences 56.10 (2013): 2531-2539.
Zheng Xinqian, Zhang Yangjun, Yang Mingyang, et al. "Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetrical Flow Control—Part II: Nonaxisymmetrical Self-Recirculation Casing Treatment." Journal of turbomachinery 135.2 (2013): 021007.
Yang Mingyang, Zheng Xinqian, Zhang Yangjun, et al. "Stability Improvement ofHigh-Pressure-Ratio TurbochargerCentrifugal Compressor byAsymmetric Flow Control—Part I:Non-Axisymmetrical Flowin Centrifugal Compressor." Journal of turbomachinery 135.2 (2013): 021006.
Tamaki Hideaki, Zheng Xinqian, and Zhang Yangjun. "Experimental Investigation of High Pressure Ratio Centrifugal Compressor With Axisymmetric and Nonaxisymmetric Recirculation Device." Journal of Turbomachinery 135.3 (2013): 031023.
Zheng Xinqian, Jin Lei, Du Tao, et al. "Effect of temperature on the strength of a centrifugal compressor impeller for a turbocharger." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2012): 0954406212454966.
Zheng Xinqian, Jin Lei, Zhang Yangjun, et al. "Effects of Disk Geometry on Strength of a Centrifugal Compressor Impeller for a High Pressure Ratio Turbocharger." ASME 2012 Gas Turbine India Conference. American Society of Mechanical Engineers, 2012.
Lan Chuanjie, Zheng Xinqian, and Hideaki Tamaki. "Non-Axisymmetric Flow Structure in Vaneless Diffuser of Centrifugal Compressor for Turbochargers." ASME 2012 Gas Turbine India Conference. American Society of Mechanical Engineers, 2012.
Lin Yun, Zheng Xinqian, Jin Lei, et al. "A novel experimental method to evaluate the impact of volute’s asymmetry on the performance of a high pressure ratio turbocharger compressor." Science China Technological Sciences 55.6 (2012): 1695-1700.
Yang Mingyang, Ricardo Martinez-Botas, Zhang Yangjun, et al. "Investigation of self-recycling-casing-treatment (srct) influence on stability of high pressure ratio centrifugal compressor with a volute." ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2011.
Zheng Xinqian, Du Tao, and Zhang Yangjun. "Prediction of thermal fatigue life of a turbine nozzle guide vane." Journal of Zhejiang University SCIENCE A 12.3 (2011): 214-222.
Zheng Xinqian, Zhang Yangjun, Xing Weidong, et al. "Separation control of axial compressor cascade by fluidic-based excitations." Journal of turbomachinery 133.4 (2011): 041016.
Zheng Xinqian, Zhang Yangjun, Yang Mingyang, et al. "Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control: Part II—Non-Axisymmetric Self Recirculation Casing Treatment." ASME Turbo Expo 2010: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2010.
Yang Mingyang, Zheng Xinqian, Zhang Yangjun, et al. "Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control: Part I—Non-Axisymmetric Flow in Centrifugal Compressor." ASME Turbo Expo 2010: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2010.
郭宫达, 张扬军, 徐建中, et al. "叶尖间隙分布对内燃机增压压气机性能影响." 航空动力学报 25.3 (2010): 549-556.
郑新前, 张扬军, 郭功达, et al. "跨声速离心压气机机匣处理扩稳研究." 工程热物理学报 31.12 (2010): 2023-2026.
Zheng Xinqian, Joern Huenteler, Yang Mingyang, et al. "Influence of the volute on the flow in a centrifugal compressor of a high-pressure ratio turbocharger." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 224.8 (2010): 1157-1169.
Chen Tao, Zhang Yangjun, Zheng Xinqian, et al. "Compressor Design for Multi-Point Operating Conditions of Turbocharged Gasoline Engines." ASME Turbo Expo 2010: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2010.
Zheng XinQian, YangJun Zhang, and MingYang Yang. "Research and development on transonic compressor of high pressure ratio turbocharger for vehicle internal combustion engines." Science China Technological Sciences 53.7 (2010): 1817-1823.
Chen Tao, Zhuge Weilin, Zheng Xinqian, et al. "Turbocharger Design for a 1.8 Liter Turbocharged Gasoline Engine Using an Integrated Method." ASME Turbo Expo 2009: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2009.
Zhuge Weilin, Zhang Yangjun, and Zheng Xinqian. "Development of an advanced turbocharger simulation method for cycle simulation of turbocharged internal combustion engines." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 223.5 (2009): 661-672.
Yang Mingyang, Zheng Xinqian, Zhang Yangjun, et al. "Improved performance prediction model for turbocharger compressor." SAE International Journal of Fuels and Lubricants 1.2008-01-1690 (2008): 1159-1166.
Guo Gongda, Zhang Yangjun, Zheng Xinqian, et al. "Research on Transonic Centrifugal Compressor Blades Tip Clearance Distribution of Vehicle Turbocharger." SAE International Journal of Fuels and Lubricants 1.2008-01-1701 (2008): 1187-1194.
郑新前, 张扬军, 周盛. "合成射流控制压气机分离流动及工程应用探索." 中国科技论文在线 3.8 (2008): 547-552.
郭宫达, 张扬军, 郑新前. "跨声速离心压气机叶尖区旋涡流动特征." 清华大学学报: 自然科学版 48.11 (2008): 1980-1984.
邱智凌, 郑新前, 张扬军. "车载燃料电池低比转速离心压气机设计." J Tsinghua Univ (Sci&Tech) 1.48 (2008): 5.
郑新前, 张扬军, 郭功达. "车用跨声速离心压气机设计." 航空动力学报 23.10 (2008): 1903-1907.
Guo Gongda, Zhang Yangjun, Zheng Xinqian, et al. "Research on Transonic Centrifugal Compressor Blades Tip Clearance Distribution of Vehicle Turbocharger." SAE International Journal of Fuels and Lubricants 1.2008-01-1701 (2008): 1187-1194.
Zhang Junyue, Zhang Jizhong, Zheng Xinqian, et al. Research and Development of 3.5 Pressure Ratio High Efficient Turbocharger. No. 2008-01-1699. SAE Technical Paper, 2008.
Zheng Xinqian and Yangjun Zhang. Research and Design of a Centrifugal Compressor for Fuel Cell Turbocharger. No. 2008-01-1692. SAE Technical Paper, 2008.
Guo Gongda, Zhang Yangjun, Xu Jianzhong, et al. "Numerical simulation of a transonic centrifugal compressor blades tip clearance flow of vehicle turbocharger." ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2008.
Zheng Xinqian, Zhang Yangjun, He Hong, et al. "Design of a Centrifugal Compressor with Low Specific Speed for Automotive Fuel Cell." ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2008.
Zheng Xinqian, Zhou Sheng, Lu Yajun, et al. "Flow control of annular compressor cascade by synthetic jets." Journal of turbomachinery 130.2 (2008): 021018.
Yang Mingyang, Zheng Xinqian, Zhang Yangjun, et al. "Improved performance model of turbocharger centrifugal compressor." ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2008.
Zheng, Xinqian, Zhang Yangjun, Xing Weidong, et al. "Flow control of annular compressor cascade by synthetic jets." Journal of turbomachinery 130.2 (2008): 021018.
周晓勃, 周盛, 侯安平, et al. "射流对压气机叶栅分离流控制的数值研究." 航空学报 28.B08 (2007): 7-13.
Zheng Xinqian, Zhang Yangjun, Xing Weidong, et al. "Separation Control of Axial Compressor Cascade by Fluidic-based Excitations." ASME Turbo Expo 2007: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2007.
Zheng Xinqian, Zhou Sheng, Hou Anping, et al. "Separation control using synthetic vortex generator jets in axial compressor cascade." Acta Mechanica Sinica 22.6 (2006): 521-527.
郑新前, 周盛. "轴流压气机叶栅动态失速现象研究." 自然科学进展 15.3 (2005): 329-335.
郑新前, 周晓勃, 侯安平, et al. "合成射流速度特性的实验研究." 推进技术 26.6 (2005): 504-507.
吴鸿斌, 郑新前, 周盛. "三维扩压叶栅非定常流动机理研究的频谱分析." 航空动力学报 20.2 (2005): 267-272.
Zheng Xinqian, Zhou Sheng, Hou Anping, et al. "Unsteady cooperative flow type in the axial compressor." Progress in Natural Science 15.10 (2005): 930-936.
Zhou Sheng, Zheng Xinqian, Hou Anping, et al. "Interaction of unsteady separated flow over multi-bodies moving relatively in the same flow field." Journal of sound and vibration 288.4 (2005): 981-1009.
Zhen Xinqian, Zhou Sheng, Hou Anping, et al. "Compressibility Effects on the Two Generations of Unsteady Flow Types in Axial Flow Compressors." ASME Turbo Expo 2005: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2005.
Zheng Xinqian, Hou Anping, and Zhou Sheng. "Control of unsteady separated flows inside axial compressors by synthetic jets." AIAA Paper 2005-870 (2005).
Zheng, Xinqian, Zhou Xiaobo, and Zhou Sheng. "Investigation on a type of flow control to weaken unsteady separated flows by unsteady excitation in axial flow compressors." Journal of turbomachinery 127.3 (2005): 489-496.
郑新前, 周盛. "低速轴流压气机尾流撞击效应的数值模拟" 推进技术 25.5 (2004).
Zheng Xinqian and Sheng Zhou. "Impact of wake on downstream adjacent rotor in low-speed axial compressor." Journal of Thermal Science 13.2 (2004): 114-120.
郑新前, 侯安平, 周盛. "二维扩压叶栅非定常分离流控制途径探索." 力学学报 35.5 (2003): 599-605.
陈武, 侯安平, 郑新前, et al. "在大分离区内使用三孔探针测试的探索." 流体力学实验与测量 17.3 (2003): 84-87.
京公网安备 11010802027423号