近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Su J, Wang JJ, Yan ST, Zhang Min, Wang HZ, Zhang NZ, Luan YC, Cheng CK. (2021) In Vitro Analysis of Wearing of Hip Joint Prostheses Composed of Different Contact Materials. Materials, 2021, 14:3805. (SCI) Doi: 10.3390/ma14143805
2. Zhang M, Liu BL, Qi XZ, Yang QQ, Sun JY, Zheng QY, Zhang GQ, Cheng CK. (2021) The Three-Dimensional Morphology of Femoral Medullary Cavity in the Developmental Dysplasia of the Hip. Frontiers in Bioengineering and Biotechnology, 2021, 9:684832. (SCI) Doi: 10.3389/fbioe.2021.684832
3. Zhang M, Wang JY, Su J, Wang JJ, Yan ST, Luan YC, Cheng CK. (2021) Wear Assessment of Tibial Inserts Made of Highly Cross-Linked Polyethylene Supplemented with Dodecyl Gallate in the Total Knee Arthroplasty. Polymers, 2021, 13(11):1847. (SCI) Doi: 10.3390/polym13111847
4. Wang ZW, Wen L, Luan YC, Ma DS, Dong X, Cheng CK, Qu TB. (2021) Restoration of Joint Inclination in Total Knee Arthroplasty Offers Little Improvement in Joint Kinematics in Neutrally Aligned Extremities. Frontiers in Bioengineering and Biotechnology, 2021, 9:673275. (SCI) Doi: 10.3389/fbioe.2021.673275
5. Qi XZ, Zhang M, Nie MD, Ma XY, Luan YC, Cheng CK, Wang M(2021). Association between Proximal Tibiofibular Joint Morphology and Knee Alignment in Osteoarthritis Patients, Applied
Sciences, 2021, 11(5):2269. (SCI) Doi: 10.3390/app11052269
6. Wang XH, Bi Z, Dong X, Hu SY, Xu LJ, Cheng CK. (2021) Increasing the height of the anterior lip on a tibial insert in a posterior stabilized knee prosthesis has little effect on the wear rate. Medical Engineering & Physics, 2021, 91: 48-53. (SCI)
7. Qi XZ, Wang M, Zhang B, Nie MD, Ma XY, Wang HZ, Wang XH, Cheng CK, Zhang M. (2020) Association Between the Morphology of Proximal Tibiofibular Joint and the Presence of Knee OA. Frontiers in Bioengineering and Biotechnology, 2020, 8:610763. (SCI) Doi: 10.3389/fbioe.2020.610763.
8. Wu P, Wang Y, Sun DY, Luo YR, Chen C, Tang ZQ, Liao YM, Cao XY, Xu LJ, Cheng CK, Liu WQ, Liang X.(2020) In-vivo histocompatibility and osteogenic potential of biodegradable PLDLA composites containing silica-based bioactive glass fiber. Journal of Biomaterials Applications, 2020,35(1):59-71.(SCI)
9. Wang Y, Wu P, Sun DY, Luo YR, Chen C, Tang ZQ, Liao YM, Cao XY, Cheng CK, Liu WQ, Liang X (2020). Mechanical and degradative properties of PLDLA biodegradable pins with bioactive glass fibers in a beagle model. Biomed Mater, 2020, 15: 035010.(SCI)
10. Wang H, Zhang M, Cheng CK (2020). Changing the diameter of the bone tunnel is more effective than changing the tunnel shape for restoring joint functionality after ACL reconstruction. Frontiers in Bioengineering and Biotechnology, 2020, 8:173. (SCI)
11. Wang H, Zhang M, Cheng CK (2020). A novel protection liner to improve graft-tunnel interaction following anterior cruciate ligament reconstruction: a finite element analysis. Journal of Orthopaedic Surgery and Research, 2020, 15(1):232. (SCI)
12. Wong PJ, Song SM, Tsai PH, Nien YY, Jang SC J, Cheng CK, Chen CH (2020). Relationship between the Surface Roughness of Biodegradable Mg-Based Bulk Metallic Glass and the Osteogenetic Ability of MG63 Osteoblast-Like Cells. Materials, 2020, 13: 1188. (SCI)
13. Cao XY, Chen C, Tian N, Dong X, Xu LJ, Cheng CK (2020). Long-term study on the osteogenetic capability and mechanical behavior of a new resorbable biocomposite anchor in a canine model, Journal of Orthopaedic Translation, 2020, 21: 81-89. (SCI)
14. Cao XY, Fang N, Tian N, Dong X, Cheng CK (2020). Influences of Unidirectional Stretching Process on Mechanical Properties of Absorbable Patch for Rotator Cuff Repair. Journal of Medical Biomechanics, 2020, 35(1): 27-34.
15. Wang H, Zhang B, Cheng CK (2019). Stiffness and shape of the ACL graft affects tunnel enlargement and graft wear. Knee Surgery, Sports Traumatology, Arthroscopy, 2019, 28(7):2184-2193. (SCI)
16. Cheng CK, Wang XH, Luan YC, Zhang NZ, Liu BL, Ma XY, Nie MD(2019). Challenges of pre-clinical testing in orthopedic implant development. Medical Engineering & Physics,2019, 72: 49-54.(SCI)
17. Wang H, Kang HJ, Yao J, Cheng CK, Woo SL.-Y. (2019). Evaluation of a magnesium ring device for mechanical augmentation of a ruptured ACL: Finite element analysis. Clinical biomechanics, 2019, 68:122-127. (SCI)
18. Liu Y, Chen HJ, Zhang B, Liu XQ, Xiao J, Cheng CK(2019). A single-component and hemi-hip prosthesis followed up for 43 years-a case report. Medicine, 2019, 98:8. (SCI)
19. Cao XY, Tian N, Dong X, Cheng CK (2019). Implant Coating Manufactured by Micro-Arc Oxidation and Dip Coating in Resorbable Polylactide for Antimicrobial Applications in Orthopedics. Coatings. 2019, 9(5):284. (SCI)
20. Cao XY, Tian N, Dong X, Cheng CK (2019). Polylactide Composite Pins Reinforced with Bioresorbable Continuous Glass Fibers Demonstrating Bone-like Apatite Formation and Spiral Delamination Degradation. Polymers. 2019. 11(5):812. (SCI)
21. Wong CC, Wong PC, Tsai PH, Jang SC, Cheng CK, Chen HH, Chen CH (2019). Biocompatibility and Osteogenic Capacity of Mg-Zn-Ca Bulk Metallic Glass for Rabbit Tendon-Bone Interference Fixation. International Journal of Molecular Sciences, 2019,20(9): 2191. (SCI)
22. Fang CH, Cheng CK, Qu TB, Zhang JH, Zhang B, Hua Q, Yan SG(2019). “The posterolateral corner-locked technique is applicable in a Chinese population regarding the tibial component rotation alignment in Total Knee Arthroplasty”. The Journal of Knee Surgery, 2019, 33(5):466-473. (SCI) Doi: 10.1055/s-0039-1678536
23. Wang XH, Dong X, Zhu BZ, Lei J, Jin ZM, Suguro Toru, Cheng CK (2019). “A preclinical method for evaluating the kinematics of knee prostheses”. Medical Engineering & Physics, 2019, 66: 84-90. (SCI)
24. Wang XH, Li H, Dong X, Zhao F, Cheng CK (2019). “Comparison of ISO 14243-1 to ASTM F3141 in terms of wearing of knee prostheses”. Clinical Biomechanics, 2019, 63:34-40. (SCI)
25. Wei ZY, Zhang GQ, Qi XZ, Wang HZ, Zhang M, Ma XS, Yao J, Cheng CK. (2019) “Morphological Feature of the Fitting Curves of Proximal Femoral Canal in Adults with Developmental Dysplasia of the Hip” Journal of Medical Biomechanics, 2019,34(4): 417-424.
26. Ma XS, Yao J, Wang HZ, Qi XZ, Wei ZY, Liu BL, Zhang M, Cheng CK. (2019) “ Finite Element Analysis on Different Geometric Shapes of Tibial Component Pegs in Unicompartmental Knee Arthroplasty”. Journal of Medical Biomechanics,2019, 34(2):186-192.
27. Zhang M, Sarah Junaid, Thomas Gregory, Ulrich Hansen, Cheng CK (2019). “Effect of baseplate positioning on fixation of reverse total shoulder arthroplasty”. Clinical Biomechanics, 2019, 62:15-22. (SCI)
28. Kuang-Ta Yao, Hung-Chan Kao, Cheng CK, Hsu-Wei Fang, Chang-Hung Huang, Ming-Lun Hsu(2019). “Mechanical performance of conical implant-abutment connections under different cyclic loading conditions.” Journal of the Mechanical Behavior of Biomedical Materials, 2019, 90:426-432. (SCI)
29. Wang XH, Song DY, Dong X, Suguro T, Cheng CK. (2019) “Motion type and knee articular conformity influenced mid-flexion stability of a single radius knee prosthesis”. Knee Surgery, Sports Traumatology, Arthroscopy, 2019, 27(5):1595-1603. (SCI)
30. Wang X, Song D, Dong X, Wang J, Jiang L, Zhu B, Cheng C(2019). “Influencing factors of femoro-tibial contact area for knee prostheses[J]. Journal of Medical Biomechanics, 2019, 34(6):594-600.
京公网安备 11010802027423号