近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Yr. 2023
刘禹铭, 赵勇, 董正建, 王平, 姬煜琦. 基于反步法的多移载工装协同作业编队控制策略[J]. 上海交通大学学报, 2023, 57(1): 103-115
Yr. 2022
LIN Q Y, ZHAO Y, SUN Q C, et al. Reliability evaluation method of anti-loosening performance of bolted joints[J]. Mechanical Systems and Signal Processing. 2022, 162(5): 108067
CHEN K Y, ZHAO Y, LIU Y M, et al. Optimization Method for Spatial Route Adjustment of Multi-bends Pipes Considering Assembly Demands[J]. Assembly Automation. 2022 42(3): 319-332
Wang Shoufei.;Zhao Yong. Conceptual configuration design of line-foldable deployable space truss structures employing graph theory[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236(10): 5360-5373
Yu Jue, Gu Yeqing, Zhao,Yong. Force and Stiffness of an Electromagnetic Spring Constituted by Magnet Inside Coaxial Cylinder Coil[C]. In: Duan, B., Umeda, K., Kim, Cw. (eds) Proceedings of the Eighth Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering, 2022, 885, Springer, Singapore
Liu Sheng, Yu Haidong, Gu Bin, Zhao Yong. MODELING AND ANALYSIS OF UNCERTAIN STATIC CONTACT CHARACTERISTICS FOR REVOLUTE CLEARANCE JOINTS[C]. Proceedings of the Asme Design Engineering Technical Conference, Volume 9: 18th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC), August 14–17, 2022, St. Louis, Missouri, USA
周宇, 赵勇, 于忠奇, 赵亦希. 交叉内筋薄壁筒体错距旋压成形数值仿真[J]. 上海交通大学学报, 2022, 56(1): 62-69
闫臣挚, 赵勇, 侯鹏, 谢永权. 悬浮气垫重力补偿装置模糊PID控制系统设计[J]. 机械设计与研究, 2022, 38(5): 142-147
张瑞程, 陈坤勇, 赵勇. 面向大部件三维重建的多视角点云配准方法[J]. 机械设计与研究, 2022, 38(3): 30-36
Yr. 2021
ZHAO Y, CHEN K, YU J, et al. Design of a parallel compliance device with variable stiffness[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2021, 235(1):94-107
Chen K Y, Zhao Y, WANG J X, et al. Point set registration for assembly feature pose estimation using simulated annealing nested Gauss-Newton optimization.[J] Assembly Automation. 2021,41(5):546-556
Wang Shoufei, Zhao Yong. Conceptual configuration synthesis of line-foldable deployable space truss structures utilizing graph theory and entropy. Proceedings of the ASME Design Engineering Technical Conference, Volume 8A: 45th Mechanisms and Robotics Conference (MR), August 17–19, 2021, Virtual, Online
Lin Qingyuan, Zhao Yong, Sun Qingchao, Chen Kunyong. Viscous friction effect during the process of tightening and loosening of bolted joints. Proceedings of the ASME Design Engineering Technical Conference, Volume 5: 26th Design for Manufacturing and the Life Cycle Conference (DFMLC), August 17–19, 2021, Virtual, Online
Yr. 2020
李锦程, 赵勇, 邢宏文, 董正建. 基于模糊力控制的移载工装协同搬运控制策略[J]. 机械设计与研究, 2020, 36(3): 89-93+99
莫凡, 赵勇, 邢宏文, 董正建. 面向翼身对接的移载定位系统全驱动调姿算法[J]. 机械设计与研究, 2020, 36(4): 142-148+159
杜田, 赵勇, 宋建岭, 魏强. 基于指数积公式的空间管路装配偏差传递建模及分析[J]. 机械设计与研究, 2020, 36(4): 128-132+137
Yr. 2019
LI Y Y, ZHAO Y, YU H D, et al. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation field[J]. Assembly automation. 2019, 39(1): 226-242
YU J, ZHAO Y, CHEN G L, et al. Realizing controllable interaction force based on an electromagnetic robotic variable stiffness join[J]. Journal of Mechanisms and Robotics. 2019, 11(5): 054501 (8 pages)
朱贺轩, 赵勇, 余觉, 等. 面向打磨力控制的电磁柔顺单元控制策略仿真分析[J]. 机械设计与研究, 2019, 35(4): 20-25+31
葛世玉, 赵勇, 赵亦希, 闫慧. 薄壁构件双面多点增量成形装备综合刚度分析[J]. 机械设计与研究, 2019, 35(3): 155-159+164
Yr. 2018
Yu, Jue; Zhao, Yong; Wang, Hao; Lai, Xinmin. Tolerance analysis of mechanical assemblies based on the product of exponentials formula[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 2018, 232: p.2616-2626 (WOS:000450340900015)
Li, Yunyong; Zhao, Yong; Yu, Haidong; Lai, Xinmin. Compliant assembly variation analysis of sheet metal with shape errors based on primitive deformation patterns[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE. 2018, 232: p.2334-2351 (WOS:000438607000002)
余海东, 李琳, 赵勇, 陶建峰. 复杂地质条件下TBM撑靴液压缸导向铜套微动损伤分析[J]. 机械工程学报, 2018, 54(1): 74-81
Yr. 2017
Zhao, Yong; Pan, Hao; Wang, Hao; Yu, Haidong. Dynamics research on grouping characteristics of a shield tunneling machine's thrust system[J]. AUTOMATION IN CONSTRUCTION. 2017,76: p.97-107 (WOS:000394068900009)
Zhao, Yong; Yu, Jue; Wang, Hao; Chen, Genliang; Lai, Xinmin. Design of an electromagnetic prismatic joint with variable stiffness[J]. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL. 2017, 44(2): p.222-230 (WOS:000398068900010)
Huang, Shunzhou; Yu, Jue; Wang, Hao; Zhao, Yong; Lai, Xinmin. THE REALIZATION OF DESIRED STIFFNESS OF PARALLEL MECHANISM BY ADDING REDUNDANTLY-ACTUATED LIMBS[C]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE. 2017 (Proceedings Paper WOS:000423244400020)
Yr. 2016
Yu, Haidong; Zhao, Chunzhang; Wang, Hao; Zhao, Yong. Experimental and numerical analysis on load-sharing behavior of gear set with simultaneously actuated pinions[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE. 2016, 230: p.1198-1208 (WOS:000375709200013)
Yu, Jue; Zhao, Yong; Wang, Hao; Chen, Genliang; Lai, Xinmin. The best-approximate realization of a spatial stiffness matrix with simple springs connected in parallel[J]. MECHANISM AND MACHINE THEORY. 2016, 103: p.236-249 (WOS:000377883600016)
Yr. 2015
Huang, Shunzhou; Wang, Hao; Zhao, Yong; Lin, Zhongqin. An analytical representation of conformal mapping for genus-zero implicit surfaces and its application to surface shape similarity assessment[J]. Computer-Aided Design, 2015. 64(0): p. 9-21.
Wang, Hao, Kong, Lingyu, Chen, Genliang, Zhao, Yong. Design of an Actuation Device With the Capability of Automatically Distributing External Load Based on Stability Theorems[J]. Journal of Mechanical Design, 2015. 137(8): p. 085001-085001.
Zhao, Chunzhang; Yu, Haidong; Lin, Zhongqin; Zhao, Yong. Dynamic model and behavior of viscoelastic beam based on the absolute nodal coordinate formulation[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2015. 229(1): p. 84 -96.
Kong, Lingyu, Wang, Hao, Zhang, Pu, Zhao, Yong, Chen, Genliang, Zhao, Longhai. Stability analysis for a planar parallel manipulator with the capability of self-coordinating the load distribution[J]. Chinese Journal of Mechanical Engineering, 2015. 28(4): p. 821-829.
郝金明, 赵勇, 王皓, 盛东义. 薄壁构件镜像加工支撑机构综合刚度的分析与优化[J]. 机械设计与研究, 2015(02): 第155-159+163页.
Yr. 2014
Huang, Shunzhou; Zhao, Yong; Wang, Hao; Lin, Zhongqin. Stabilized multi-domain simulation algorithms and their application in simulation platform for forging manipulator[J]. Chinese Journal of Mechanical Engineering, 2014. 27(1): p. 92-102.
赵春璋, 余海东, 王皓, 赵勇. 基于绝对节点坐标法的变截面梁动力学建模与运动变形分析[J]. 机械工程学报, 2014(17): 第38-45页.
郝培, 余海东, 赵勇. 考虑隧道表面特性的硬岩全断面掘进装备撑靴接触界面刚度分析[J]. 上海交通大学学报, 2014(06): 第827-832页.
余海东, 郝培, 赵勇, 来新民. 硬岩掘进装备支撑系统界面接触刚度非线性特性[J]. 机械工程学报, 2014(21): 第54-59页.
By Yr. 2013
Zhao Yong; Chen Genliang; Wang Hao; Lin Zhongqin. Optimum selection of mechanism type for heavy manipulators based on particle swarm optimization method. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2013, 26(4): p.763-770 (WOS:000323104900017)
段旭洋, 王皓, 赵勇, 陈根良. 基于嵌套粒子群算法的平面机构尺度综合与构型优选 (Dimensional Synthesis and Optimal Type Selection of Planar Mechanisms Based on Nested Particle Swarm Optimization). 机械工程学报, 2013(13): 第32-39页.
秦娜, 王皓, 赵勇, 陈根良. 考虑制造误差的计算机辅助机构误差分析 (Computer-aided Mechanical Error Analysis Considering Manufacturing Error). 机械设计与研究, 2013(02): 第4-10页.
李建军, 余海东, 赵勇, 来新民. 盾构机冗余驱动推进系统不同分组策略的动力传递特性实验研究 (Experimental Research on Force Transmission Behavior of Redundant Driving Thrusting System of Shield Machines with Various Grouping Strategies). 中国机械工程, 2013(21): 第2861-2867页.
袁镭, 余海东, 赵勇, 王皓. 基于变密度法的大型天线系统支撑结构优化设计 (Optimal Design of Supporting Structure in Large Antenna System Based on SIMP Method). 机械设计与研究, 2013(01): 第118-122页.
Zhao Yong; Wang Hao; Yu Haidong; Lai Xinmin; Lin Zhongqin. A stiffness-matching based evaluation approach for compliance of mechanical systems in shield tunneling machines. Science China (Technological Sciences), 2012(10): p. 2926-2935.
孙卫东, 王皓, 赵勇. 一种冗余驱动协调机构的偏载稳定性分析 (Stability Analysis of a Redundantly Actuating Mechanism with Coordinating Mechanism). 机械工程学报, 2012(01): 第7-12页.
盛东义, 赵勇, 王皓, 孙卫东. Tricept并联机构的弹性动力学性能 (Kineto-Elastic-Dynamics( KED) Analysis of Tricept Parallel Mechanism). 机械设计与研究, 2012(06): 第23-29页.
余海东, 赵春璋, 赵勇, 李建军. 多齿轮并联驱动系统动力稳定性(Dynamic stability of a gear pair system actuated with multiple pinions). 中国科技论文, 2012(08): 第594-597+602页.
林晓文, 王皓, 赵勇. 考虑构件弹性变形的锻造操作机静刚度分析 (Stiffness Analysis of the Heavy Forging Manipulators Considering Structure Deformation). 机械设计与研究, 2011(01): 第94-98页.
Wang, Hao; Chen, Genliang; Zhao, Yong; Lin, Zhongqin. Output error bound prediction of parallel manipulators based on the level set method. Mechanism and Machine Theory, 2010. 45(8): p. 1153-1170.
赵勇, 林忠钦, 王皓, 重型锻造操作机的操作性能分析 (Manipulation Performance Analysis of Heavy Manipulators). 机械工程学报, 2010(11): 第69-75页.
范凡, 王皓, 赵勇. 自由锻造操作机冗余驱动系统的驱动力分配与协调 (Driving force distribution and coordination of the redundant actuation system in Heavy Forging Manipulators). 机械设计, 2009(09): 第26-30页.