近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Cui J H, Zhao Y X, Li X K, et al. Research on the influence of ultrasonic on the inner rib’s surface morphology of ribbed cylindrical parts in flow spinning process[J]. Journal of Manufacturing Processes, 2021, 67: 376-387.
2. Cheng Xuan, Zhao Yixi, El-Aty A, et al. Deformation behavior of convolute thin-walled AA6061-T6 rectangular tubes manufactured by the free bending forming technology [J]. The International Journal of Advanced Manufacturing Technology, 2021:,10.1007/s00170-021-08141-9
3. Leitao Gao, Jinlong Song, Yixi Zhao Zhongqi Yu， Parametric roller path design in multi-pass conventional spinning of curvilinear generatrix parts ，The International Journal of Advanced Manufacturing Technology, 2021，113(5), 1637-1648
4. Leitao Gao,Yixi Zhao, Zhongqi Yu ，Hui Yan ，Formability analysis of electrically assisted double-side multi-point incremental sheet forming，The International Journal of Advanced Manufacturing Technology ，2020(108), 3405–3417
5. Song Wu, Yunwu Ma, Leitao Gao, Yixi Zhao*, Sherif Rashed, Ninshu Ma,*，A novel multi-step strategy of single point incremental forming for high wall angle shape， Journal of Manufacturing Processes, 2020(56) 697-706
6. Zhongqi Yu, Yixi Zhao, Chenyang Du, Ruofan Liu, S. A. Evsyukov，Study on flange-constrained spinning process for hemispherical aluminum alloy part，Journal of Materials Processing Technology,2020(278) 116515
7. Yixi Zhao, Xumin Wan, Leitao Gao , Qingshuai Kong, Zhongqi Yu，Theoretical prediction of sheet metal wrinkling based on the potential function analysis，Journal of Manufacturing Science and Engineering ，2018,(140 )– 101012（1-12）
8. Yixi Zhao, Linfa Peng, Xinmin Lai， Influence of the electric pulse on springback during stretch U-bending of Ti6Al4V titanium alloy sheets，Journal of Materials Processing Tech，2018(261),12-23
9. Yixi Zhao，Linfa Peng，Formability and flow channel design for thin metallic bipolar plates in PEM fuel cells: Modeling，International Journal of Energy Research, S PECI A L I SSUE PAPER,2018;1–13.
10. Yixi Zhao, Yansong Zhang , Xinmin Lai ,Effect of epoxy adhesive on nugget formation in resistance welding of SAE1004/DP600/DP780 steel sheets, Materials 2018, 11, 1828;
11. Yixi Zhao, Yansong Zhang , Xinmin Lai ,Analysis of Fracture Modes of Resistance Spot Welded Hot-Stamped Boron Steel, Metals 2018, 8, 764;
12. Li Shuhui ; He Ji ; Gu Bin; Danielle Zengc; Z. Cedric Xiac; Zhao Yixi, Anisotropic fracture of advanced high strength steel sheets:Experiment and theory, International Journal of Plasticity, 2018(103): 95-118
13. Baohang Zhu, Yixi Zhao, Zhongqi Yu , Hui Yan, Study the influence of geometric parameters on springback in T-section aluminum alloy window trim strip sheets forming, Materials Science Forum ,2018,920：70-76
14. Yixi Zhao, Sheng Huang, Wenjiao Dan，Weigang Zhang, Shuhui Li，In-situ bending under tension shear fracture analysis and microstructure “earthquake” of DP780 dual phase steels，Materials Science and Engineering: A，2017 May（695）：80–91,
15. Kong Q, Yu Z, Zhao Y, et al. Theoretical prediction of flange wrinkling in first-pass conventional spinning of hemispherical part[J]. Journal of Materials Processing Technology, 2017 August（246）：56–68
16. Sheng Huang, ChunFeng He, and YiXi Zhao*，Microstructure-Based RVE Approach for Stretch-Bending of Dual-Phase Steels，Journal of Materials Engineering and Performance (2016) 25:966–976
17. Gan T，Kong Q，Yu Z, Zhao Y，et al. A Numerical Study of Multi-pass Design Based on Bezier Curve in Conventional Spinning of Spherical Components[C]. Numiform. Vol. 80， 2016
18. Shanshuai Wang, Shuhui Li, Ji He, Yixi Zhao ,Asymmetric Postbuckling Behavior of Hemispherical Shell Structure Under Axial Compression, Journal of Engineering Materials and Technology, JANUARY 2016, Vol. 138 / 011005-1
19. Shuhui Li, JiHe, YixiZhao, ShanshuaiWang, LiangDong, RonggaoCui, Theoretical failure investigation for sheet metals under hybrid stretch-bending loadings, International Journal of Mechanical Sciences, 104(2015)75–90
20. Sheng Huang, Yi-xi Zhao, and Chun-feng He. Shear Fracture of Advanced High Strength Steels. Journal of Iron and Steel Research, International, 2014, 21(10): 938-944.
21. Huang S, Zhao Y, He C. Stamping failure analysis of advanced high strength steel sheet based on non-uniform local deformation through thickness[C]//NUMISHEET 2014: AIP Publishing, 2013, 1567(1): 583-586.
22. Sheng Huang, Chun-feng He, Yi-xi Zhao, Shu-hui Li, Zhong-qi Yu and Liang Dong. Uniaxial Tension Simulation Using Real Microstructure-based Representative Volume Elements Model of Dual Phase Steel Plate[C]. ICTP 2014, Nagoya, Japan, 2014.
23. Wen.Kang, Yixi.Zhao, Wangwei.Yu, Shanshuai.Wang, Yuefeng.Ma, Peijie.Yan. Numerical Simulation and Parameters Analysis for Roll Forming of Martensitic Steel MS980[C]. 11th International Conference on Technology of Plasticity(ICTP 2014),Nagoya, Japan，2014.
24. HU Xing, ZHAO Yi-xi, LI Shu-hui, LIN Zhong-qin. Numerical simulation of ductile fracture behavior for aluminum alloy sheet under cyclic plastic deformation[J]. Trans Nonferrous Met Soc China, 2011, 21: 1595-1601.
25. Shuhui Li, Xing Hu, Yixi Zhao, Zhongqin Lin, Nanqiao Xu. Cyclic hardening behavior of roller hemming in the case of aluminum alloy sheets[J]. Materials & Design, 2011, 32(4): 2308-2316.
26. Xing Hu, Yixi Zhao, Shuhui Li, Cheng Liu，Numerical simulation of dimensional variations for roller hemming，Advanced Materials Research，160-162(2011)，1601-1605
27. Xing Hu,Yixi Zhao , Sheng Huang,Shuhui Li &Zhongqin Lin Numerical analysis of the roller hemming process，Int J Adv Manuf Technol (2012) 62:543–550
28. Nanqiao Xu, Mei Li, Yixi Zhao, Xing Hu. Failure modes of dual phase steels under different loading paths[J]. Advanced Materials Research, 2011, 160: 1674-1679.
29. Zhi-Min Li, Yi-Xi Zhao, Xiang-Dong Chen, Wu-Rong Wang. Non-linear buckling and postbuckling of shear deformable anisotropic laminated cylindrical panel under axial compression. Mechanics of Composite Material. Vol.46, no.6, pp.599-626, 2010.
30. Wei T, Zhao Y, Song B, et al. The FE simulation research on roll bending process of complex sheet with padding assisted[C]//AIP Conference Proceedings. 2013, 1532: 1066.
31. 李晓凯，赵亦希，于忠奇，朱宝行，崔峻辉，铝合金带筋构件超声辅助旋压仿真研究，上海交通大学学报，2021,1
32. 朱宝行;赵亦希;于忠奇. 薄壁筒形件流动旋压内筋高度计算方法[J]. 塑性工程学报,2020,27（2）:68-78.
33. 胡逸辉; 李杰; 赵亦希; 尤舒曼; 郑高媛，机器人柔性翻边新工艺，机械设计与研究，2020,36（3）,100-104
34. 詹杨,赵亦希,朱宝行.铝合金车身窗框亮条翻边圆角不均匀缺陷解决方案[J].上海交通大学学报,2019,53(04):488-496.
35. 李东玮,王磊,张聪,赵亦希.预折刀工作终止位置对包边边界缩进的影响[J].上海交通大学学报,2019,53(01):100-104.
36. 赵亦希，潘尔顺，李艳婷，林忠钦，奚立峰，政府职能与市场功能在推动质量发展中的定位与作用，中国市场监管研究，2018（8）：53-57
37. 赵亦希 李永兵 潘尔顺，聚焦优质制造，助推质量强国----解读《优质制造》，中国机械工程，2018（29），2389-2393
38. 林忠钦，赵亦希，潘尔顺，中国汽车制造质量提升战略研究，中国工程科学，2018.1（20）：45-51
39. 林忠钦，奚立峰，蒋家东，郭政，刘颖，潘尔顺，赵亦希，李艳婷，中国制造业质量与品牌发展战略研究，中国工程科学，2017.3（19）：20-28
40. 杨珂，赵亦希，冯昌文，余志华，铝合金模压包边工艺尺寸设计方法，上海交通大学学报，2018,52(2)：182-187
41. 曹克，赵亦希，铝合金单点增量成形轴向成形力实验与仿真，机械设计与研究，2018.3(34)：119-123
42. 杜引，赵亦希，于忠奇，李喜林，2060-T8铝锂合金电致塑性本构方程，塑性工程学报，2017，24 ( 1) : 133- 139
43. 闫慧, 赵亦希, 于忠奇, 等. 2060-T8铝锂合金槽形件电辅助增量成形实验研究. 上海交通大学学报，2017，51（5），513-519.
44. 宋杨湾，徐祥和，赵亦希，杨柯，包边宽度的计算方法，塑性工程学报，2017，5（24）：125-131
45. 郭志明，田杨，赵亦希，扭转梁后桥台架试验标准制定研究，机械设计与研究，2017，8
46. 宋金龙,赵亦希,于忠奇,孔庆帅，铝合金封头旋压成形变厚度毛坯设计方法研究，上海交通大学学报，2017，51(11)：1304-1311
47. 万旭敏,赵亦希,孔庆帅，于忠奇，旋压法兰起皱预测研究 上海交通大学学报，2017，51(11)：1312-1319
48. 杜引，赵亦希，于忠奇，李喜林，2060-T8铝锂合金电致塑性本构方程，塑性工程学报，2017，24 ( 1) : 133- 139．
49. 李喜林，赵亦希，闫慧，杜引，薄壁零件局部结构的双面多点增量成形，塑性工程学报，2016.12,V23(6),pp:42-50
50. 史敏，赵亦希*， 孔庆帅， 于忠奇；薄壁铝合金封头挡板辅助旋压成形方法，上海交通大学学报，2015,499(10):1497-1503
51. 康稳； 赵亦希； 晏培杰； 马越峰；QStE700TM型高强度钢方矩管滚弯成形试验, 上海交通大学学报，2015,499(10): 1516-1521
52. 晁灿, 赵亦希, 康稳, 晏培杰, 马跃峰. QSTE700型冷弯高强度钢方管的冷作硬化效应[J].上海交通大学学报, 2014,48(5):605-609.
53. 何春锋, 赵亦希, 黄胜. 高强度双相钢板拉弯成形断裂的微观组织形貌分析[J]. 上海交通大学学报, 2014,48(5):618-623.
54. 王镇晓, 赵亦希, 孔庆帅, 于忠奇. 柔性滚弯成形工艺中边波的控制方法[J]. 上海交通大学学报, 2014,48(5):624-628.
55. 李梅，赵亦希，胡星，黄胜. 先进高强度双相钢汽车板剪切断裂实验[J]. 上海交通大学学报, 2011, 45(11): 1695-1699.
56. 刘程，赵亦希，胡星，李淑慧，席升印. 基于轮廓尺寸变动量的三道次机器人滚压包边角度路径设计[J]. 塑性工程学报, 2011, 18(1): 16-20.
57. 魏天海, 赵亦希, 胡星. 先进超高强马氏体钢的成形回弹控制[J]. 塑性工程学报, 2012, 19(3): 71-75.
58. 伍俊棠，赵亦希，李淑慧，席升印，王斌锋，王武荣。滚压包边角度对包边件轮廓尺寸变动的影响。锻压技术，2010,35(3)：29-33。
京公网安备 11010802027423号