近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] Zi-Lun Li, Hao-Yu Chu, Xue-Cheng Xi, Wei-Wen Xia, Yan-Xin Sun, Wan-Sheng Zhao. Improving reciprocating traveling WEDM performance by a new adaptive servo feedrate control system. The International Journal of Advanced Manufacturing Technology. Vol. 114, No.5, 1409-1425, 2021
[2] Jing Hu, Yulei Fu, Dong Li, Yingmou Zhu, Ruixue Zhang, Wansheng Zhao. Hybrid particle-thermodynamic model and experimental validation of multi-track periodical heating during electron beam treatment. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 439, 34-42, 2018
[3] Weiwen Xia, Junqi Wang, Wansheng Zhao. Break-out Detection for High-speed Small Hole Drilling EDM Based on Machine Learning. Procedia CIRP 68, 569-574, 2018
[4] GW Huang, WW Xia, L Qin, WS Zhao. Online Workpiece Height Estimation for Reciprocated Traveling Wire EDM Based on Support Vector Machine. Procedia CIRP 68, 126-131 1, 2018
[5] YL Fu, J Hu, RX Zhang, WJ Huo, XT Cao, WS Zhao. Surface modification of AISI 1045 steel by pseudospark based pulsed electron beam. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 434, 88-92, 2018
[6] L Gu, J Chen, Y Zhu, W Zhao, KP Rajurkar. Influence of reinforcement particles on the mechanism of the blasting erosion arc machining of SiC/Al composites. The International Journal of Advanced Manufacturing Technology, Vol. 99/5-8, 2018
[7] J Chen, L Gu, Y Zhu, W Zhao. High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Journal of Engineering Manufacture. Vol.232/12, 2226-2235, 2018
[8] Y Zhang, N Han, X Kang, S Lan, W Zhao. Experimental investigation of the governing parameters of the electrostatic field–induced electrolyte jet micro electrical discharge machining on the silicon wafer. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol.232/12, 2201-2209, 2018
[9] W Zhao, L Gu, F Zhang, KP Rajurkar. Modeling study of the hydrodynamic arc breaking mechanism in BEAM. CIRP Annals, Vol. 67/1, 189-192, 2018
[10] X Kang, W Liang, W Zhao, H Xu. Feeding with perturbations in the EDM process of an integral shrouded blisk. The International Journal of Advanced Manufacturing Technology. Vol. 96/9-12, 3951-3957, 2018
[11] L Gu, Y Zhu, F Zhang, A Farhadi, W Zhao. Mechanism analysation and parameter optimization of electro discharge machining of titanium- zirconium- molybdenum alloy. Journal of Manufacturing Processes. Vol. 32, 773-781, 2018
[12] J Chen, L Gu, X Liu, W Zhao. Combined machining of SiC/Al composites based on blasting erosion arc machining and CNC milling. The International Journal of Advanced Manufacturing Technology. Vol. 96/1-4, 111-121, 2018
[13] HD Liu, XC Xi, W Liang, M Chen, H Chen, WS Zhao. A look-ahead transition algorithm for jump motions with short line segments in EDM. The International Journal of Advanced Manufacturing Technology. Vol. 95/1-4, 1409-1419, 2018
[14] Y Zhu, A Farhadi, G He, T Liang, L Gu, W Zhao. High-efficiency machining of large aspect-ratio rotational parts by rapid contour approaching WEDM. The International Journal of Advanced Manufacturing Technology. Vol. 94/9-12, 3577-3590, 2018
[15] HD Liu, XC Xi, M Chen, WS Zhao. A look-ahead transition algorithm and jump motion planning in multi-axis EDM for shrouded blisks. The International Journal of Advanced Manufacturing Technology, 1-12, 2018
[16] X Kang, W Liang, Y Yang, W Zhao. Maximum free distance method for electrode feeding path planning in EDM machining of integral shrouded blisks. Precision Engineering Vol. 51, 514-520, 2018
[17] Y Fu, J Hu, X Shen, Y Wang, W Zhao. Surface hardening of 30CrMnSiA steel using continuous electron beam. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 410, 207-214, 2017
[18] Y Zhang, X Kang, W Zhao. The investigation of discharge restriction mechanism of the floating workpiece based electrostatic field-induced electrolyte jet (E-Jet) EDM. Journal of Materials Processing Technology. Vol. 247, 134-142, 2017
[19] H Xu, L Gu, W Zhao, J Chen, F Zhang. Influence of flushing holes on the machining performance of blasting erosion arc machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 231/11, 1949-1960, 2017
[20] Yaou Zhang, Ning Han, Xiaoming Kang, Wansheng Zhao, Kaixian Xu. Experimental study of an electrostatic field–induced electrolyte jet electrical discharge machining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 231/10, 1752-1759, 2017
[21] M Chen, XC Xi, WS Zhao, H Chen, HD Liu. A universal velocity limit curve generator considering abnormal tool path geometry for CNC machine tools. Journal of Manufacturing Systems. Vol. 44, 295-301, 2017
[22] Y Zhang, X Kang, W Zhao. The contrastive experimental investigation of the discharge concentration problem in the E-Jet EDM. The International Journal of Advanced Manufacturing Technology. Vol. 91/5-8, 2359-2367, 2017
[23] H Chen, XC Xi, WS Zhao, M Chen. Feedrate planning for synchronized movements involving rotary axes in multi-axis EDM for shrouded blisks. The International Journal of Advanced Manufacturing Technology. Vol. 90/9-12, 2645-2654, 2017
[24] Y Zhu, T Liang, L Gu, W Zhao. Precision machining of high aspect-ratio rotational part with wire electro discharge machining. Journal of Mechanical Science and Technology. Vol. 31/3, 1391-1399, 2017
[25] H Chen, WS Zhao, XC Xi, M Chen, W Liang. Non-circular parametric curve and curved surface interpolation and tool compensation for WEDM based on unit arc length increment method. The International Journal of Advanced Manufacturing Technology. Vol. 88/5-8, 1257-1266, 2017
[26] XC Xi, M Chen, WS Zhao. Improving electrical discharging machining efficiency by using a Kalman filter for estimating gap voltages. Precision Engineering. Vol. 47, 182-190, 2017
[27] L Gu, J Chen, H Xu, W Zhao. Blasting erosion arc machining of 20 vol.% SiC/Al metal matrix composites. The International Journal of Advanced Manufacturing Technology. Vol. 87/9-12, 2775-2784, 2016
[28] Y Zhang, K Wilt, X Kang, N Han, W Zhao. The experimental investigation of electrostatic field-induced electrolyte jet (E-Jet) micro-electrical machining mechanism. The International Journal of Advanced Manufacturing Technology. Vol. 87/9-12, 3059-3068, 2016
[29] W Liang, X Kang, W Zhao, Y Yang. Electrical discharge machining of electron beam melting formed shrouded blisk. The International Journal of Advanced Manufacturing Technology. Vol. 87/5-8, 2319-2326, 2016
[30] F Zhang, L Gu, J Chen, H Xu, W Zhao. Observation and modeling research of high-velocity flushing effect on the performance of BEAM. The International Journal of Advanced Manufacturing Technology. Vol. 86/1-4, 935-942, 2016
[31] J Chen, L Gu, H Xu, W Zhao. Study on blasting erosion arc machining of Ti–6Al–4V alloy. The International Journal of Advanced Manufacturing Technology. Vol. 85/9-12, 2819-2829, 2016
[32] Y Zhang, N Han, X Kang, W Zhao. An experimental study on the effect of parameters on the depth of crater machined by electrostatic field–induced electrolyte jet micro electrical discharge machining. Advances in Mechanical Engineering. Vol. 8/4, 1-7, 2016
[33] L Gu, F Zhang, W Zhao, KP Rajurkar, AP Malshe. Investigation of hydrodynamic arc breaking mechanism in blasting erosion arc machining. CIRP Annals. Vol. 65 /1, 233-236, 2016
[34] Wansheng Zhao, Junmin Zheng, Xuecheng Xi, Mo Chen, Hao Chen, Weiwen Xia. A new model of WEDM-CNC system with digitizer/player architecture. Procedia CIRP. Vol. 42, 210-214, 2016
[35] Fawang Zhang, Lin Gu, Jing Hu, Wansheng Zhao. A new thermal model considering TIE of the expanding spark for anode erosion process of EDM in water[J]. The International Journal of Advanced Manufacturing Technology. Vol. 82/1-2, 573-582, 2016.
[36] Wansheng Zhao, Hui Xu, Lin Gu, Hong Han, K.P. Rajurkar. Influence of polarity on the performance of Blasting Erosion Arc Machining[J]. CIRP Annals-Manufacturing Technology, Vol. 64/1, 213-216, 2015.
[37] Hui Xu, Lin Gu, Jipeng Chen, Jing Hu, Wansheng Zhao. Machining characteristics of nickel-based alloy with positive polarity blasting erosion arc machining[J]. The International Journal of Advanced Manufacturing Technology. Vol. 79/5–8, 937–947, 2015.
[38] Xuecheng Xi, Wansheng Zhao, Aun-Neow Poo. Improving CNC contouring accuracy by robust digital integral sliding mode control[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 51-61.
[39] Chen M, Wansheng Zhao, Xi Xuecheng. Augmented Taylor's expansion method for B-spline curve interpolation for CNC machine tools[J]. International Journal of Machine Tools and Manufacture, 2015, 94: 109-119.
[40] Xuecheng Xi, Shangcheng Dou, Wansheng Zhao . Online estimation of workpiece height by least squares support vector machines in wire electrical discharge machining[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014, 228(14): 2618-2631.
[41] Xiaoming Kang, Lei Dong, Wansheng Zhao. Performance of propellant for ultrasonically aided electric propulsion[J]. Acta Astronautica, 2014, 98: 1-8.
[42] Shangcheng Dou, Xuecheng Xi, Wansheng Zhao. Workpiece height estimation in wire electrical discharge machining by using support vector regression[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227(4): 565-577.
[43] Xiao Liu, Xiaoming Kang, Xuecheng Xi, Wei Liang, Wansheng Zhao. Electrode feed path planning for multi-axis EDM of integral shrouded impeller[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8): 1697-1706.
[44] Wansheng Zhao, Lin Gu, Hui Xu, Lei Li, Xiaoli Xiang . A novel high efficiency electrical erosion process–blasting erosion arc machining[J]. Procedia CIRP, 2013, 6: 621-625.
[45] Yaou Zhang, Wansheng Zhao, Tiansheng Lu, Jingsong Li. The Attitude Control of the Four–Rotor Unmanned Helicopter Based on Feedback Linearization Control[J]. WSEAS Transactions on Systems (4).2013.Volume 12.Issue 4
[46] Su Liang, Wansheng Zhao, Xuecheng Xi. Design of a real-time NURBS interpolator with constant segment length for milling EDM[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(1-4): 427-440.
[47] Ye Yang, Wansheng Zhao. Investigation of the nanoscale features fabricated on the HOPG surface induced by STM electric lithography under different voltage regions in ambient conditions[J]. Precision Engineering, 2013, 37(2): 473-482.
[48] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu, Xiaoming Kang. Detecting discharge status of small-hole EDM based on wavelet transform[J]. The International Journal of Advanced Manufacturing Technology, 2012, 61(1-4): 171-183.
[49] Ye Yang, Wansheng Zhao. Nanopit generation on HOPG surface induced by CAFM electric lithography[J]. International Journal of Nanomanufacturing, 2012, 8(4): 263-277.
[50] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu. Adaptive control for small-hole EDM process with wavelet transform detecting method[J]. Journal of mechanical science and technology, 2012, 26(6): 1885-1890.
[51] Lei Li, Lin Gu, Xuecheng Xi, Wansheng Zhao. Influence of flushing on performance of EDM with bunched electrode[J]. The International Journal of Advanced Manufacturing Technology, 2012, 58(1-4): 187-194.
[52] Lin Gu, Lei Li, Wansheng Zhao, K.P. Rajurkarb. Electrical discharge machining of Ti6Al4V with a bundled electrode[J]. International Journal of Machine Tools and Manufacture, 2012, 53(1): 100-106.
[53] Yi Jiang, Wansheng Zhao, Xuecheng Xi. A study on pulse control for small-hole electrical discharge machining[J]. Journal of Materials Processing Technology, 2012, 212(7): 1463-1471.
[54] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Xiaoming Kang, Lin Gu. Vibration assisted EDM of small-hole using voice coil motor[J]. Procedia CIRP, 2012, 1: 645-650.
[55] Lin Gu, Lei Li, Wansheng Zhao, Kamlakar P. Rjaurkar. An Efficient and Economical Rapid-Tooling Method for Die-Sinking Electrical Discharge Machining[J]. Journal of Manufacturing Science and Engineering, 2011, 133(5): 051004.
[56] Yong Wu, Xiaoming Kang, Xiao Liu, Wansheng Zhao. Electrode Designing System for EDMing Shrouded Turbine Blisk Based on UG Secondary Development[J]. Aerospace Materials & Technology, 2011, 3: 020.
[57] Yi Jiang, Wansheng Zhao, Lin Gu , Xiaoming Kang. Research on Pulse Generator and Pulse Control Technology for Micro Electrical Discharge Machining [J][J]. Journal of Shanghai Jiaotong University, 2011, 11: 022.
[58] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu, Xiaoming Kang. Detecting discharge status of small-hole EDM based on wavelet transform. The International Journal of Advanced Manufacturing Technology. 2011, DOI: 10.1007/s00170-011- 3676-9.:1-13.
[59] Ye Yang, Natsu Wataru, Wansheng Zhao. Realization of eco-friendly electrochemical micromachining using mineral water as an electrolyte[J]. Precision Engineering, 2011, 35(2): 204-213.
[60] Dan Wang, Wansheng Zhao , Xiaoming Kang, Lin Gu, Honyu Wei. Orthogonal-Testing Experimental on Micro-Ultrasonic-Machining of Microcrystalline-Mica-Ceramic [J][J]. Journal of Shanghai Jiaotong University, 2010, 1: 011.
[61] Wang Dan, Zhao Wansheng, Gu Lin, Kang Xiaoming. A study on micro-hole machiningof polycrystalline diamond by micro electrical discharge machining. Journal of Materials Processing Technology.2011, 211(1): 3-11.
[62] Xiaoming Kang, Tiezhu Xin, Feng Jin, Lei Dong, Wansheng Zhao. Application of MAO-processed ceramic layerin micro thrusters. Aircraft Engineering and Aerospace Technology, 2011, 83(1):21-25
[63] Lei Li, Lin Gu, Xuecheng Xi, Wansheng Zhao. Influence of Flushing on Performance of EDM with Bunched Electrode. International Journal of Advanced Manufacturing Technology, 2011, DOI: 10.1007/s00170-011-3357-8
[64] Yaou Zhang, Wansheng Zhao, Xiaoming Kang. Control of the permanent magnet synchronous motor using model reference dynamic inversion[J]. WSEAS transaction on systems and control, 2010, 5.
[65] Yaou Zhang, Wansheng Zhao, Hongyu Wei. The study of recursive-based sliding mode adaptive control of the permanent magnet synchronous motor[J]. WSEAS Transactions on Systems, 2010, 9(5): 559-569.
[66] Duan Junyi, Kang Xiaoming and Zhao Wansheng. Minimum emission current of indium-field emission electric propulsion thruster. Aircraft Engineering and Aerospace Technology. 2010, 82(5) : 284-287
京公网安备 11010802027423号