近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. H. Wang, M. Lu, X.C. Wang, F.H. Sun*, Synthesis, characterization and cutting performances of gradient gradual changing (GGC-) MCD/SMCD/NCD/UNCD diamond coatings with tailored interfacial integrity on CFRP drilling tools, Journal of Manufacturing Processes, Vol. 85, 2023: 466-478 (SCI)
2. M. Lu, C. Zhang, X.C. Wang, F.H. Sun*, Theoretical and experimental research on growth and doping mechanisms of diamond films fabricated using liquid carbon source precursors, Applied Surface Science, Vol. 629, 2023: 157389 (12 pages)
3. B.C. Zhang, S.F. Chen, X.C. Wang*, Machining uniformity and property change of abrasive media for micro-porous structures, Journal of Materials Processing Technology, Vol. 307, 2022: 117675 (14 pages) (SCI)
4. X.C. Wang*, X. Song, B.C. Zhang, Y. Qiao, F.H. Sun, Effects of urea versus N2 addition on growth and mechanical properties of HFCVD diamond films on WC-Co substrates, Diamond and Related Materials, Vol. 215, 2022: 108999 (10 pages) (SCI)
5. B.C. Zhang, S.F. Chen, N. Khiabani, Y. Qiao, X.C. Wang*, Research on the underlying mechanism behind abrasive flow machining on micro-slit structures and simulation of viscoelastic media, Advances in Manufacturing, available online, 2022 (SCI)
6. Y. Qiao, W.H. Li, S.F. Chen, X.C. Wang*, Measurement and calibration of substrate surface temperature in hot filament chemical vapor deposition, Measurement, Vol. 205, 2022: 112147 (9 pages)
7. B.C. Zhang, Y. Qiao, N. Khiabani, X.C. Wang*, Study on rheological behaviors of media and material removal mechanism for abrasive flow machining (AFM) micro structures and corresponding simulations, Journal of Manufacturing Processes, Vol. 73, 2022: 248-259 (SCI)
8. Y. Qiao, N. Khiabani, Y.F. Xiao, X.C. Wang*, Improvement on uniformity of diamond coatings on PCB milling cutters with specific cutting edge structures, Diamond and Related Materials, Vol. 122, 2022:108827 (15pages) (SCI)
9. X. Song, M. Lu, H. Wang, X.C. Wang, F.H. Sun*, Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films, Ceramics International, Vol. 48, 2022: 21868-21878 (SCI)
10. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Erosion mechanism and cutting performance of MPCVD multilayer diamond thick film-Si3N4 brazed insert, International Journal of Advanced Manufacturing Technology, Vol. 118, 2022: 2437-2451 (SCI)
11. X.C. Wang*, B.C. Zhang, Y. Qiao, F.H. Sun, Chemo-mechanical abrasive flow machining (CM-AFM): A novel high-efficient technique for polishing diamond thin coatings on inner hole surfaces, Journal of Manufacturing Processes, Vol. 69, 2021:152-164 (SCI)
12. X.C. Wang*, Y. Qiao, K. Larsson, F.H. Sun, Energetic stability and geometrical structure of variously terminated and N-doped diamond (111) surfaces – a theoretical DFT study, Materials Chemistry and Physics, Vol. 262, 2021:124283 (SCI)
13. X.C. Wang*, Y. Qiao, X. Song, F.H. Sun, Determination of carbonization depths in Ti substrates in diamond growth atmospheres and modified diffusion models, Journal of Alloys and Compounds, Vol. 860, 2021: 157904 (SCI)
14. B.C. Zhang, X.C. Wang*, X.J. Jia*, Research on the mechanism of molten salt cleaning (MSC) for multiple contaminants in cylinder covers, Journal of Cleaner Production, Vol. 302, 2021: 126990 (12 pages) (SCI)
15. H. Wang, X. Song, X.C. Wang, F.H. Song*, Fabrication, tribological properties and cutting performances of high-quality multilayer graded MCD/NCD/UNCD coated PCB end mills, Diamond and Related Materials, Vol. 118, 2021: 108505 (17 pages) (SCI)
16. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Coupling effects of methane concentration and nitrogen addition level on morphologies and properties of MPCVD diamond films on WC-Co substrates, Diamond and Related Materials, Vol. 117, 2021:108487 (12 pages) (SCI)
17. X. Song, H. Wang, X.C. Wang, F.H. Sun*, Fabrication and evaluation of diamond thick film-Si3N4 brazed cutting tool by microwave plasma chemical vapor deposition method, Journal of Materials Processing Technology, Vol. 291, 2021: 117034 (SCI)
18. H. Wang, X. Song, X.C. Wang, F.H. Sun*, Tribological performance and wear mechanism of smooth ultrananocrystalline diamond films, Journal of Materials Processing Technology, Vol. 290, 2021: 116993 (SCI)
19. C.C. Wang, X.C. Wang, X.T. Shen, F.H. Sun*., Synthesis and evaluation of high-performance diamond films with multilayer structure on printed circuit board drills, Diamond and Related Materials., Vol. 112, 2021: 108249 (SCI)
20. H. Wang, C.C. Wang, X.C. Wang, F.H. Sun*, Effects of carbon concentration and gas pressure with hydrogen-rich gas chemistry on synthesis and characterizations of HFCVD diamond films on WC-Co substrates, Surface and Coatings Technology, Vol.409, 2021:126839 (SCI)
21. X. Song, C.C. Wang, X.C. Wang, F.H. Sun*, Mass production of HFCVD diamond-coated wire-drawing dies without filament through the hole, Surface Review and Letters, Vol.28, 2021: 2150006 (14 pages) (SCI)
22. X.T. Shen, X. Song, X.C. Wang, F.H. Sun*, Grinding characteristics of CVD diamond grits in single grit grinding of SiC ceramics, International Journal of Advanced Manufacturing Technology, Vol.114, 2021: 2783-2797 (SCI)
23. X.C. Wang*, X. Song, H. Wang, Y. Qiao, K. Larsson, F.H. Sun, Selective control of oxidation resistance of diamond by dopings, ACS Applied Materials & Interfaces, Vol. 12, 2020: 42302-42313 (SCI)
24. X.C. Wang*, Y. Qiao, F.H. Sun, Influences of Si dopant on geometry and energetic stability of terminated diamond (111)-1x1 surfaces, Diamond and Related Materials, Vol. 109, 2020: 108014 (SCI)
25. Juhong Chen*, Chun-Yen Liu, Xinchang Wang, Eric Sweet, Nathaniel Liu, Xiaohua Gong, Liwei Lin*, 3D printed microfluidic devices for circulating tumor cells (CTCs) isolation, Biosensors and Bioelectronics, Vol.150, 2020: 111900 (SCI)
26. H. Wang, X.T. Shen, X.C. Wang, F.H. Sun*, Simulation and experimental researches on the substrate temperature distribution of the large-capacity HFCVD setup for mass-production of diamond coated milling tools, Diamond and Related Materials, Vol. 101, 2020: 107610 (SCI)
27. X.C. Wang*, C.C. Wang, X.T. Shen, K. Larsson, F.H. Sun, DFT calculations of energetic stability and geometry of O-terminated B- and N-doped diamond (111)-1x1 surfaces, Journal of Physics: Condensed Matter, Vol.31, 2019: 265002 (SCI)
28. X.C. Wang*, C.C Wang, X.T. Shen, F.H. Sun, Tribological behaviors of the diamond films sliding against the T800/X850 CFRP laminates, Wear, Vol.418-419, 2019: 191-200 (SCI)
29. X.T. Shen, X.C Wang, F.H. Sun*, Fabrication and evaluation of monolayer diamond grinding tools by hot filament chemical vapor deposition method, Journal of Materials Processing Technology, Vol.265, 2019: 1-11 (SCI)
30. X.C. Wang*, C.C. Wang, C.Y. Wang, F.H. Sun, Approach for polishing diamond coated complicated cutting tool: Abrasive flow machining (AFM), Chinese Journal of Mechanical Engineering, Vol. 31, 2018: 97 (SCI)
31. X.C. Wang*, C.C. Wang, W.K. He, F.H. Sun, Co evolutions for WC-Co substrates with different Co contents during pretreatment and HFCVD diamond film growth processes, Transactions of Nonferrous Metals Society of China, Vol. 28, 2018: 469-486 (SCI)
32. X.C. Wang*, X.T. Shen, C. Zeng, F.H. Sun, Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining, Surface and Coatings Technology, Vol. 347, 2018: 390-397 (SCI)
33. X.C. Wang*, C.C. Wang, F.H. Sun, B. Shen, Development and growth time optimization of the boron-doped micro-crystalline, undoped micro-crystalline and undoped fine-grained composite diamond film, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.232, 2018: 1244-1258 (SCI)
34. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, High-speed drawing of al alloy wire by diamond-coated drawing die under environmentally friendly water-based emulsion lubrication, Journal of Manufacturing Science and Engineering, Vol. 140, 2018: 124502 (SCI)
35. X.C. Wang, C.C. Wang, F.H. Sun*, C.Y. Ding, Simulation and experimental researches on HFCVD diamond film growth on small inner-hole surface of wire-drawing die with no filament through the hole. Surface and Coatings Technology, Vol. 339, 2018: 1-13 (SCI)
36. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Tribological properties of diamond films for high-speed drawing Al alloy wires using water-based emulsions, Tribology International, Vol. 123, 2018: 92-104 (SCI)
37. C.C. Wang, X.C. Wang, F.H. Sun*, Fabrication and application of nano/microcrystalline composite diamond coated drawing dies using alternative carbon sources, Transactions of Nonferrous Metals Society of China, Vol.28, 2018: 1602-1610 (SCI)
38. C.C. Wang, X.C. Wang, F.H. Sun*. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics. Surface and Coatings Technology, Vol.353, 2018: 49-57 (SCI)
39. T.Q. Zhao, X.C. Wang, F.H. Sun*, The effects of boron doping on residual stress on HFCVD diamond film for MEMS applications, Surface Review and Letters, Vol.25, 2018: 1850039 (SCI)
40. X.C. Wang*, X.T. Shen, J.F. Gao, F.H. Sun, Consecutive deposition of amorphous SiO2 interlayer and diamond film on graphite by chemical vapor deposition, Carbon, Vol. 117, 2017: 126-136 (SCI)
41. X.C. Wang*, X.T. Shen, G.D. Yang, F.H. Sun, Evaluation of boron-doped-microcrystalline/nanocrystalline diamond composite coatings in drilling of CFRP. Surface and Coatings Technology, Vol. 330, 2017: 149-162 (SCI)
42. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Influence of boron doping level on basic properties and erosion behavior of boron-doped micro-crystalline diamond (BDMCD) film, Diamond and Related Materials, Vol.73, 2017: 218-231 (SCI)
43. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Potential material for fabricating optical mirrors: polished diamond coated silicon carbide, Applied Optics, Vol.56, 2017: 4113-4122 (SCI)
44. X.T. Shen, X.C. Wang, F.H. Sun*, C.Y. Ding, Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates, Diamond and Related Materials, Vol.73, 2017: 7-14 (SCI)
45. 王新昶*,王成川,孙方宏,沈彬,HFCVD金刚石薄膜涂层小孔径拉丝模的制备及应用研究,超硬材料工程,第29卷,2017: 35-42
46. 赵天奇,王新昶,孙方宏*,低残余应力HFCVD硼掺杂金刚石薄膜的制备与图形化研究,金刚石与磨料磨具工程,第37卷第1期,2017: 29-33
47. 丁超越,孙方宏*,王新昶,基于不穿丝技术的小孔径拉丝模HFCVD金刚石涂层的温度场仿真及实验研究,真空科学与技术学报,第37卷第6期,2017: 633-639
48. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Mechanical properties and erosion performances of MCD films synthesized using different carbon sources by BE-HFCVD, International Journal of Refractory Metals and Hard Materials, Vol.54, 2016: 370-377 (SCI)
49. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Simulation optimization of filament parameters for uniform depositions of diamond films on surfaces of ultra-large circular holes, Applied Surface Science, Vol.388, 2016: 593-603 (SCI)
50. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of MCD films synthesized using different carbon sources when sliding against stainless steel, Tribology Letters, Vol.61, 2016: 1-16 (SCI)
51. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of SiC-based MCD films synthesized using different carbon sources when sliding against Si3N4, Applied Surface Science, Vol.369, 2016: 448-459 (SCI)
52. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Uniform deposition of chemical vapor deposition diamond films on slender tungsten wires, Materials Science Forum, Vol.848, 2016: 618-623
53. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Growth time optimization of fine grained diamond coated drills for machining CFRP, Materials Science Forum, Vol.836-837, 2016: 333-339
54. 王新昶*,申笑天,赵天奇,孙方宏,沈彬,复合金刚石薄膜涂层铝塑复合管拉拔模的制备及应用(上),超硬材料工程,第28卷第2期,2016: 20-23
55. 王新昶*,申笑天,赵天奇,孙方宏,沈彬,复合金刚石薄膜涂层铝塑复合管拉拔模的制备及应用(下),超硬材料工程,第28卷第3期,2016: 35-40
56. 王新昶*,王成川,孙方宏,沈彬,金刚石薄膜涂层扇形孔绞线紧压模的制备、抛光及应用研究,中国表面工程,第29卷,2016: 75-82(中文EI)
57. 申笑天,沈彬,王新昶,赵天奇,孙方宏*,铜基体表面CVD单晶金刚石微粉的制备,金刚石与磨料磨具工程,第36卷第6期,2016: 20-24
58. X.C. Wang, T.Q. Zhao, F.H. Sun*, B. Shen, Comparisons of HFCVD diamond nucleation and growth using different carbon sources, Diamond and Related Materials, Vol.54, 2015: 26-33 (SCI)
59. X.C. Wang, Z.C. Lin, B. Shen, F.H. Sun*, Effects of deposition parameters on HFCVD diamond films growth on inner hole surfaces of WC-Co substrates, Transactions of Nonferrous Metals Society of China, Vol.25, 2015: 791-802 (SCI)
60. X.C. Wang, L. Wang, B. Shen, F.H. Sun*, Friction and wear performance of boron doped, undoped microcrystalline and fine grained composite diamond films, Chinese Journal of Mechanical Engineering, Vol.28, 2015: 155-163 (SCI)
61. 王新昶*,申笑天,孙方宏,沈彬,HFCVD硼掺杂复合金刚石薄膜的机械性能研究,金刚石与磨料磨具工程,第35卷第6期,2015: 8-13, 18
62. 徐杰,王新昶*,超高强度钢内螺纹铣削用涂层刀具及工艺研究,武汉纺织大学学报,第28卷第6期,2015: 90-94
63. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Erosion mechanism of the boron-doped diamond films of different thicknesses, Wear, Vol.312, 2014:1-10 (SCI)
64. X.C. Wang, Y.X. Cui, J.G. Zhang, B. Shen, F.H. Sun*, Erosive wear performance of boron doped diamond films on different substrates, Proceedings of the Institution of Mechanical Engineers, Part J: Engineering Tribology, Vol.228, 2014: 352-361 (SCI)
65. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Fracture and solid particle erosion of micro-crystalline, nano-crystalline and boron-doped diamond films, International Journal of Refractory Metals and Hard Materials, Vol.45, 2014: 31-40 (SCI)
66. X.C. Wang, X.L. Lei, L. Cheng, F.H. Sun*, B. Shen, Simulation-based optimal design of HFCVD equipment adopted for mass production of diamond films on inner-hole surfaces, Surface Review and Letters, Vol.20, 2014: 1450066-1-14 (SCI)
67. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of deposition parameters on micro- and nano-crystalline diamond films growth on WC-Co substrates by HFCVD, Transactions of Nonferrous Metals Society of China, Vol.24, 2014: 1-8 (SCI)
68. 刘建锦,张韬,王新昶,沈彬,孙方宏*,基于HFCVD法密封环基体的温度场仿真及实验,金刚石与磨料磨具工程,第34卷第2期,2014: 1-5
69. 程雷,张建国,王新昶,张韬,沈彬,孙方宏*,热丝法批量制备金刚石涂层钻头参数仿真优化,上海交通大学学报,第48卷第11期,2014: 1600-1605
70. X.C. Wang, Z.C. Lin, T. Zhang, B. Shen, F.H. Sun*, Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 422-431 (SCI)
71. X.C. Wang, J.G. Zhang, F.H. Sun*, T. Zhang, B. Shen, Investigations on the fabrication and erosion behavior of the composite diamond coated nozzles, Wear, Vol.304, 2013: 126-137 (SCI)
72. X.C. Wang, T. Zhang, B. Shen, J.G. Zhang, F.H. Sun*, Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface, Surface and Coatings Technology, Vol.219, 2013: 109-118 (SCI)
73. X.C. Wang, J.G. Zhang, T. Zhang, B. Shen, F.H. Sun*, Simulation optimization of the heat transfer conditions in HFCVD diamond film growth inside holes, Surface Review and Letters, Vol.20, 2013: 1350031-1-13 (SCI)
74. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 285-292 (SCI)
75. J.G. Zhang, T. Zhang, X.C. Wang, B. Shen, F. H. Sun*, Simulation and experimental studies on substrate temperature and gas density field in HFCVD diamond films growth on WC-Co drill tools, Surface Review and Letters, Vol.20, 2013: 1350020-1-10 (SCI)
76. T. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Z.M. Zhang, The effect of deposition parameters on the morphology of micron diamond powders synthesized by HFCVD method, Journal of Crystal Growth, Vol.372, 2013: 49-56 (SCI)
77. X.C. Wang*, S.L. Chen, B. Shen, F.H. Sun, Frictional and wear behavior of micro-crystalline and nano-crystalline diamond films, Advanced Materials Research, Vol.797, 2013: 719-724
78. L. Cheng, J.G. Zhang, X.C. Wang, T. Zhang, B. Shen, F.H. Sun*, Simulation of temperature distribution in HFCVD diamond films growth on WC-Co drill tools in large quantities, Key Engineering Materials, Vol.589-590, 2013: 399-404
79. X.C. Wang*, B. Shen, F.H. Sun, Z.M. Zhang, H.S. Shen, S.S. Guo, Deposition and application of CVD diamond films on the interior-hole surface of silicon carbide compacting dies, Key Engineering Materials,Vol.499, 2012: 45-50
80. X.C. Wang*, B. Shen, F.H. Sun, Deposition and characterization of boron-doped HFCVD diamond films on Ti, SiC, Si and Ta substrates, Applied Mechanics and Materials, Vol.217-219, 2012: 1062-1067
81. X.C. Wang*, B. Shen, F.H. Sun, CVD diamond films as wear-resistant coatings for relief valve components in the coal liquefaction equipment, Solid State Phenomena, Vol.175, 2011: 219-225
82. X.C. Wang*, F.H. Sun, B. Shen, Z.M. Zhang, S.S. Guo, Deposition and application of nanocrystalline diamond films on silicon carbide substrates, Nano-Micro Letters, Proceedings of Shanghai International Nanotechnology Cooperation Symposium, Special Issue, 2011: 29-32
83. 王新昶,孙方宏*,孙乐申,丁庆华,彭东辉,高压差高固含量减压阀的仿真优化设计,上海交通大学学报,第45卷第11期,2011: 1597-1601 (3)
84. 王新昶,孙方宏*,沈彬,彭东辉,张志明,CVD金刚石涂层煤液化减压阀关键部件的制备,金刚石与磨料磨具工程,第31卷第186期,2011: 20-24
85. T.Q. Zhao, W.S. Wang, X.C. Wang, F.H. Sun*, B. Shen, Comparison of residual stress in boron-doped MCD and NCD films deposited on Si substrates for MEMS manufacture, The 16th International Manufacturing Conference in China (IMCC), 2015: 1094-1100(会议论文)
86. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Cutting performance of abrasive flow machined NCD coated milling tools in peripheral finish-milling aluminum alloy, The 16th International Manufacturing Conference in China (IMCC), 2015: 73-79(会议论文)
87. 王新昶*,申笑天,孙方宏,沈彬,SiC基HFCVD金刚石薄膜的制备及镜面抛光,第十八届中国磨料技术学术会议,2015: 13-18(会议论文)