近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1 F.H.Sun, et al, Improvement of adhesive strength and surface roughness of diamond films on Co-cemented tungsten carbide tools, Diamond Related Materials, 2003, Vol.12, pp:711-718
2 Fanghong Sun, Yuping Ma, Bin Shen, Zhiming Zhang and Ming Chen, Fabrication and application of nano-microcrystalline composite diamond films on the interior-hole surfaces of Co cemented tungsten carbide substrates, Diamond and Related Materials, 2009, vol.18(2-3), pp: 276-282.
3 F.H.Sun, et al, Fabrication and application of high quality diamond-coated tools, Journal of Materials Processing Technology, 2002, Vol.129(1-3), pp:441-445
4 Sun, F.H., Zhang, Z.M., Ma, Y.P. and Chen, M., Synthesis of nanocrystalline diamond films on smooth WC-Co cemetned carbide substrate, International Journal of Abrasive Technology, 2007,vol.1, No.2, pp: 161-172.
5 F.H.Sun, et al, A new technology on enhancing heat transfer of grinding contact zone through jet impingement during creep feed grinding, Machining Science and Technology. 2002, Vol.6 (1), pp:43-52
6 F.H. Sun, et al, Fabrication and application of smooth composite diamond films, Surface Engineering, 2003, Vol.19, pp: 461-465
7 孙方宏等，高性能CVD金刚石薄膜涂层刀具的制备和试验研究，机械工程学报，2003，39卷，7期，100-106
8 孙方宏等，纳米金刚石薄膜的制备与应用，机械工程学报，2007，43卷，3期，118-122
9 Bin Shen and Fanghong Sun, Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates, Diamond and Related Materials, 2009, Vol.18(2-3), pp: 238-243
10 Bin Shen, Fanghong Sun, Molecular dynamics investigation on the atomic-scale indentation and friction behaviors between diamond tips and copper substrate, Diamond and Related Materials, Vol.19, No.7-9, 2010: 723-728
11 Liang Wang, Xuelin Lei, Bin Shen, Fanghong Sun, Zhiming Zhang, Tribological properties and cutting performance of boron and silicon doped diamond films on Co-cemented tungsten carbide inserts, Diamond and Related Materials, 2013, Vol.33, pp:54-62
12 Xinchang Wang, Tao Zhang, Bin Shen, Jianguo Zhang, Fanghong Sun, Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface, Surface and Coatings Technology, 2013, Vol.219(25), pp: 109–118
13 Tao Zhang, Jianguo Zhang, Bin Shen, Fanghong Sun. Simulation of temperature and gas density field distribution in diamond films growth on silicon wafer by hot filament CVD. Journal of Crystal Growth. 2012, Vol.343(1), pp:55–61
14 T. Zhang, X. Wang, B. Shen, F. Sun and Z. Zhang, The effect of deposition parameters on the morphology of micron diamond powders synthesized by HFCVD method, J. Cryst. Growth, 2013, Vol.372 (0): pp. 49-56.
15 Dongcan Zhang, Bin Shen, Fanghong Sun, Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates, Applied Surface Science, 2010, Vol.256(8), pp: 2479-2489
16 Naichao Chen, Bin Shen, Guodong Yang, Fanghong Sun, Tribological and cutting behavior of silicon nitride tools coated with monolayer- and multilayer-microcrystalline HFCVD diamond films, Applied Surface Science, 2013, Vol.265C(1), pp: 856-859
17 Yuxiao Cui, B. Shen, Fanghong Sun, Influence of amorphous ceramic interlayers on tribological properties of CVD diamond films, Applied Surface Science, 2014, Vol. 313, pp: 918-925
18 Xinchang Wang, Tianqi Zhao, Fanghong Sun, Bin Shen, Comparisons of HFCVD diamond nucleation and growth using different carbon sources, Diamond and Related Materials, 2015, Vol. 54, pp: 26-33
19 Xuelin Lei, Bin Shen, Fanghong Sun, Optimization of diamond coated micro drills in aluminum alloy 7075 machining: a case study, Diamond and Related Materials, 2015, Vol. 54, pp: 79-90
20 Xinchang Wang, Jianguo Zhang, Bin Shen, Tao Zhang, Fanghong Sun, Erosion mechanism of the boron-doped diamond films of different thicknesses, Wear, 2014, Vol. 312, pp: 1-10
21 X. C. Wang, J. G. Zhang, F. H. Sun, T. Zhang, B. Shen, Investigations on the fabrication and erosion behavior of the composite diamond coated nozzles, Wear, 2013, Vol. 304, pp: 126-137
22 Tao Zhang, Liang Wang, Fanghong Sun, Bin Shen, Zhiming Zhang, The effect of boron doping on the morphology and growth rate of micron diamond powders synthesized by HFCVD method, Diamond and Related Materials, 2013, Vol. 40, pp: 82-88
23 Yuxiao Cui, Weisong Wang, Bin Shen, Fanghong Sun, A study of CVD diamond deposition on cemented carbide ball-end milling tools with high cobalt content using amorphous ceramic interlayers, Diamond and Related Materials, 2015, Vol. 59, pp: 21-29
24 X. Wang, J. Zhang, B. Shen, T. Zhang, F. Sun, Fracture and solid particle erosion of micro-crystalline, nano-crystalline and boron doped diamond films, International Journal of Refractory Metals and Hard Materials, 2014, Vol. 45, pp: 31-40
25 X. Lei, B. Shen, L. Cheng, F. Sun, M. Chen, Influence of pretreatment and deposition parameters on the properties and cutting performance of NCD coated PCB micro drills, International Journal of Refractory Metals and Hard Materials, 2014, Vol. 43, pp: 30-41
26 X. Wang, X. Shen, F. Sun, B. Shen, Mechanical properties and solid particle erosion of MCD films synthesized using different carbon sources by BE-HFCVD, International Journal of Refractory Metals and Hard Materials, 2016, Vol. 54, pp: 370-377
27 Xinchang Wang, Liang Wang, Bin Shen, Fanghong Sun, Friction and wear performance of boron doped, undoped microcrystalline and fine grained composite diamond films, Chinese Journal of Mechanical Engineering, 2015, Vol. 28, pp: 155-163
28 J. Zhang, X. Wang, B. Shen, F. Sun, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP, International Journal of Refractory Metals and Hard Materials, 2013, Vol. 41, pp: 285-293
29 X. Wang, Z. Lin, T. Zhang, B. Shen, F. Sun, Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies, International Journal of Refractory Metals and Hard Materials, 2013, Vol. 41, pp: 422-431
30 Zichao Lin, Bin Shen, Fanghong Sun, Zhiming Zhang, Songshou Guo, Numerical and experimental investigation of trapezoidal wire cold drawing through a series of shaped dies, The International Journal of Advanced Manufacturing Technology, 2015, Vol. 76(5-8), pp: 1383-1391
31 Liang Wang, Bin Shen, Fanghong Sun, Zhiming Zhang, Effect of growth pressure on boron and nitrogen doped diamond films by HFCVD, Surface and Interface Analysis, 2015, Vol. 47(1), pp: 572-586
31 Xiaotian Shen, Xinchang Wang, Fanghong Sun, Chaoyue Ding, Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates, Diamond and related materials, 2017, Vol. 73, pp:7-14
32 X.C. Wang, C.C. Wang, F.H. Sun, C.Y. Ding, Simulation and experimental researches on HFCVD diamond film growth on small inner-hole surface of wire-drawing die with no filament through the hole. Surface and Coating Technology,2018, Vol. 339, pp:1-13
34 C.C. Wang, X.C. Wang, F.H. Sun. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics. Surface and Coatings Technology, 2018, Vol.353, pp:49-57
34 X.T Shen, C.C Wang, F.H. Sun,The effects of deposition parameters on the grain morphology and wear mechanism of monolayer diamond grinding tools fabricated by hot filament CVD method , Diamond and related materials , 2018,Vol.89, pp:312-321
35 X.T Shen, X.C Wang, F.H. Sun, Fabrication and evaluation of monolayer diamond grinding tools by hot filament chemical vapor deposition method, Journal of Materials Processing Technology, 2019,Vol.265, pp:1-11
36 H. Wang, J. Yang, F.H. Sun, Cutting performances of MCD, SMCD, NCD and MCD/NCD coated tools in high-speed milling of hot bending graphite molds, Journal of Materials Processing Technology, 2020, Vol.276, pp:1-13
37 H. Wang, X. Song, X.C. Wang, F.H. Sun, Tribological performance and wear mechanism of smooth ultrananocrystalline diamond films, Journal of Materials Processing Technology, 2021, Vol.290, pp:1-13
38 H. Wang, X. Song, X.C. Wang, F.H. Sun, Fabrication, tribological properties and cutting performances of high-quality multilayer graded MCD/NCD/UNCD coated PCB end mills, Diamond and Related Materials, 2021, Vol.118, pp: 1-17
39 H. Wang, X.T. Shen, X.C. Wang, F.H. Sun, Simulation and experimental researches on the substrate temperature distribution of the large-capacity HFCVD setup for mass-production of diamond coated milling tools, Diamond and Related Materials, 2020, Vol.101, pp: 1-12
40 H. Wang, C.C. Wang, X.C. Wang, F.H. Sun. Effects of carbon concentration and gas pressure with hydrogen-rich gas chemistry on synthesis and characterizations of HFCVD diamond films on WC-Co substrates, Surface and Coatings Technology, 2021, Vol.409, pp: 1-12
41 X. Song, H. Wang, X.C. Wang, F.H. Sun, Erosion mechanism and cutting performance of mpcvd multilayer diamond thick film-si3n4brazed inserts, The International Journal of Advanced Manufacturing Technology, 2021, Vol.118(7-8), pp:2437-2451
42 X. Song, H. Wang, X.C. Wang, F.H. Sun, Coupling effects of methane concentration and nitrogen addition level on morphologies and properties of mpcvd diamond films on wc-co substrates, Diamond and Related Materials, 2021, Vol.117, 108487
43 X. Song, H. Wang, X.C. Wang, F.H. Sun, Fabrication and evaluation of diamond thick film-Si3N4 brazed cutting tool by microwave plasma chemical vapor deposition method, Journal of Materials Processing Technology, 2020, Vol.291, 117034
44 X. Song, M. Lu, H. Wang, X.C. Wang, F.H. Sun, Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films, Ceramics International, 2022, Vol.48, pp: 21909-21919
45 孙方宏，王新昶，林子超著，内孔金刚石涂层的制备与应用，上海交通大学出版社，2021，12
京公网安备 11010802027423号