近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
2021年
1. S. Chen, B. Shen*, Z. Huang, Z. Ji, Q. Lin, Z. Zhang, Controlled friction on graphene via substrate deformation induced atomic pinning effect, Computational Materials Science, 190 (2021) 110315.
2. Yufei GUI, Qi LIU, Yun ZHU, Sulin CHEN, Bin SHEN*, Performance analysis and application on Ti-6Al-4V of micro-forging system, Chinese Journal of Aeronautics, In Press. https://doi.org/10.1016/j.cja.2020.09.008
3. Qiang Lin, Sulin Chen, Bin Shen & Fanghong Sun (2021) CVD diamond coated drawing dies: a review, Materials and Manufacturing Processes, 36:4, 381-408, DOI: 10.1080/10426914.2020.1832689
2020年
1. Zhewei Huang, Qiang Lin, Zhe Ji, Sulin Chen, and Bin Shen*, The Interior Failure of Single-layer Graphene Activated by the Nanosized Asperity on the Substrate Surface,Advanced Materials Interfaces,In Press. https://doi.org/10.1002/admi.202000281
2. Qiang Lin, Sulin Chen, Zhe Ji, Zhewei Huang, Zhinan Zhang, Bin Shen*, Deposition of mirror-like surface finish ultrananocrystalline diamond films on tungsten carbide by optimizing the substrate pretreatment, Surface and Coatings Technology, 2020. In Press. https://doi.org/10.1016/j.surfcoat.2020.125885
3. Shen, B.*, Gui, Y., Chen, B. et al. Application of spindle power signals in tool condition monitoring based on HHT algorithm. The International Journal of Advanced Manufacturing Technology, volume 106, pages 1385–1395 (2020).
4. Anbo Cao, Bin Shen*, Qiang Lin, Sulin Chen, Zhewei Huang, Zhe Ji, Zhinan Zhang, Influence of Stone-Wales defect on graphene friction: Pinning effect and wrinkle modification, Computational Materials Science, 2020, Volume 173, 109423
5. Bin Shen, Sulin Chen*, Zhewei Huang, Zhe Ji, Qiang Lin, Zhinan Zhang, Elucidating the atomic mechanism of the lubricity of graphene on the diamond substrate. Applied Surface Science, 2020, 504, 144372.
6. Qiang Lin, Sulin Chen, Bin Shen & Fanghong Sun (2020) CVD diamond coated drawing dies: a review, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2020.1832689
2019年
1. Bin Shen*, Qiang Lin, Sulin Chen, Zhe Ji, Zhewei Huang, Zhinan Zhang, High-rate synthesis of ultra-nanocrystalline diamond in an argon-free hot filament chemical vapor deposition atmosphere for tribological films. Surface and Coatings Technology, 2019, 378, 124999.
2. Bin Shen∗, Zhewei Huang, Zhe Ji, Qiang Lin, Sulin Chen, Danjie Cui, Zhinan Zhang, Bilayer Graphene Film Synthesized by Hot Filament Chemical Vapor Deposition as a Nanoscale Solid Lubricant, Surface and Coatings Technology, 2019, 380, 125061(1-7).
3. Bin Shen*,Qiang Lin, Sulin Chen, Zhewei Huang, Zhe Ji, Anbo Cao, and Zhinan Zhang Double-Vacancy Controlled Friction on Graphene: The Enhancement of Atomic Pinning, Langmuir, 2019, 35, 12898−12907.
4. Sulin Chen#, Bin Shen#*, Fan Zhang*,Hong Hong, and Jinshan Pan, Mussel-inspired Graphene Film with Enhanced Durability as a Macroscale Solid Lubricant, ACS Applied Materials & Interfaces, 2019, doi:10.1021/acsami.9b10404.
5. Bin Shen*, Hong Hong, Sulin Chen, Xi Chen, Zhinan Zhang, Cathodic electrophoretic deposition of magnesium nitrate modified graphene coating as a macro-scale solid lubricant. Carbon, 2019, 145: 297-310.
2018年
1. Bin SHEN*, Su-lin CHEN, Fang-hong SUN, Effect of deposition temperature on properties of boron-doped diamond films on tungsten carbide substrate. Transactions of Nonferrous Metals Society of China, 2018, 28(4): 729-738.
2017年
2. Shen, B.*, S. Chen, Y. Chen,F. Sun, Enhancement on the tribological performance of diamond films by utilizing graphene coating as a solid lubricant. Surface and Coatings Technology, 2017. 311: p. 35-45.
3. Chen, S., B. Shen*, F. Sun, The influence of normal load on the tribological performance of electrophoretic deposition prepared graphene coating on micro-crystalline diamond surface. Diamond and Related Materials, 2017. 76: p. 50-57.
4. Chen, S., B. Shen*, Y. Chen, F. Sun, Synergistic friction-reducing and anti-wear behaviors of graphene with micro- and nano-crystalline diamond films. Diamond and Related Materials, 2017. 73: p. 25-32.
2016年
1. Sulin Chen, Bin Shen*, Fanghong Sun, Zhiming Zhang, Songshou Guo, Tribological behaviors of diamond films and their applications in metal drawing production in water-lubricating condition, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2016. 230: p.656-666.1.
2015年之前
1. Bin Shen*, Bo Song, Lei Cheng, Xuelin Lei, Fanghong Sun, Optimization on the HFCVD setup for the mass-production of diamond-coated micro-tools based on the FVM temperature simulation[J], Surface & Coatings Technology, 2014, 253: 123-131.
2. Bin Shen*, Sulin Chen, Fanghong Sun, Investigation on the long-duration tribological performance of bilayered diamond/diamond-like carbon films[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Engineering Tribology, 2014, 228:628-641.
3. Bin Shen*; Lei Cheng; Fanghong Sun, The effect of the gas outlet on the gas velocity field in mass-production of HFCVD diamond-coated drills[J]. Surface Review and Letters, 2014, 21(4): 1450051 (15 pages).
4. Bin Shen*, Sulin Chen, Lei Cheng, Fanghong Sun, The effect of the gas inlet on the fluid field during fabricating HFCVD diamond-coated cutting tools[J]. Surface Review and Letters, 2014, 21(5): 1450068 (15 pages).
5. Bin Shen*, Sulin Chen, Lei Cheng, Fanghong Sun, The effect of the double-deck filament setup on enhancing the uniformity of temperature field on long-flute cutting tools[J], Surface Review and Letters, 2014, 21(6): 1450078 (15 pages).
6. X. Lei, B. Shen*, S. Chen, L. Wang and F. Sun, Tribological behavior between micro-and nano-crystalline diamond films under dry sliding and water lubrication, Tribology International, 2014,69: 118-127.
7. X. Lei, B. Shen*, L. Cheng, F. Sun and M. Chen, Influence of pretreatment and deposition parameters on the properties and cutting performance of NCD coated PCB micro drills, International Journal of Refractory Metals and Hard Materials, 2014,43: 30-41.
8. Naichao Chen, Bin Shen, Guodong Yang, Fanghong Sun,Tribological and cutting behavior of silicon nitride tools coated with monolayer- and multilayer-microcrystalline HFCVD diamond films, Applied Surface Science,2013, 265: 850– 859.
9. Chen Sulin, Shen Bin, Zhang Jianguo, Wang Liang, Sun Fanghong. Evaluation on the residual stresses of silicon-doped CVD diamond films using X-ray diffraction and Raman spectroscopy. Transactions of Nonferrous Metals Society of China. 2012,22: 3021−3026.
10. Shen Bin, Sun Fanghong, Zhang Zhiming, Shen Hesheng, Guo Songsou. Application of Ultra-smooth Composite Diamond Film coated WC-Co Drawing Dies in Water-lubricating Conditions. Transactions of Nonferrous Metals Society of China. 2013,23: 161−169.
11. Bin Shen, Fanghong Sun, Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates, Diamond and Related Materials, Vol.18(2-3), 238-243 (2009).
12. Bin Shen, Fanghong Sun, Molecular Dynamics Investigation on the Atomic-scale Indentation and Friction Behaviors between Diamond Tips and Copper Substrate, Diamond and Related Materials, Vol.19(7-9), 723-728 (2010).
13. Bin Shen, Fanghong Sun, Molecular dynamics investigation on the atomic-scale friction behaviors between copper(001) and diamond(111) surfaces, Applied Surface Science, Vol.255(17), 7663-7668(2009).
14. Bin Shen, Fanghong Sun, Hongguo Xue, Ming Chen and Zhiming Zhang, Study on fabrication and cutting performance of high quality diamond coated PCB milling tools with complicated geometries, Surface Engineering, Vol.25(1), 70-76(7) (2009).
15. Bin Shen, Fanghong Sun, Friction Behavior of HFCVD diamond films on WC-Co Substrates under Ambient Air and Water Lubricating Conditions, Chinese Journal of Mechanical Engineering, Vol.22(5), 665-671(2009).
16. Bin Shen, Fanghong Sun, Effect of Surface Morphology on the frictional behavior of HF-CVD diamond films, Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol.223(7), 1049-1058 (2009).
17. Bin Shen, Fanghong Sun and Zhiming Zhang, Experimental and Molecular Dynamics Investigation on the Tribological Properties of Nanocrystalline Diamond Films, Journal of Nanoscience and Nanotechnology, Vol. 9(2), 788-792 (2009).
18. Bin Shen, Fanghong Sun, Molecular Dynamics Investigations on the Atomic-scale Frictional Behavior of Diamond Films, Journal of Computational and Theoretical Nanoscience, Vol.5(8), 1556-1559 (2008).
19. Dongcan Zhang, Bin Shen, Fanghong Sun, Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates, Applied Surface Science, Vol.256(8), 2479-2489(2010).
20. T. Zhang, J.G. Zhang, B. Shen and F.H. Sun, Simulation of temperature and gas density field distribution in diamond films growth on silicon wafer by hot filament CVD, Journal of Crystal Growth, Vol.343(1), 55-61(2012).
21. Fanghong Sun, Yuping Ma, Bin Shen, Zhiming Zhang and Ming Chen, Fabrication and application of nano-microcrystalline composite diamond films on the interior-hole surfaces of Co cemented tungsten carbide substrates, Diamond and Related Materials, Vol.18(2-3), 276-282 (2009).
22. 沈彬,孙方宏,张志明,CVD金刚石薄膜在水润滑条件下的摩擦磨损性能研究,摩擦学学报,Vol.28(1), 112-117 (2008).
23. 沈彬,孙方宏,薛宏国,陈明,张志明,高性能复杂形状金刚石薄膜涂层刀具的制备与切削性能研究,中国机械工程,Vol.19(19), 2287-2291 (2008).
24. 沈彬,孙方宏,张志明,沈荷生,郭松寿,CVD金刚石薄膜涂层整体式刀具的制备与应用,金刚石与磨料磨具工程, Vol.30(1), 1-5(2011).