近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Zhang, P., Xu, C., Rao, Y., Liang, C., Experimental and Numerical Study of Heat Transfer and Turbulent Flow in a Rotating channel with V Rib-Dimple Hybrid Structures, International Journal of Thermal Sciences, 185, 108162, 2023.
2. Yu H., Lou J. Liu H., Chu Z.W., Yang, L., Wang, Q., Rao, Y., A Transfer Learning Method to Assimilate Numerical Data with Experimental Data for Effusion Cooling, Applied Thermal Engineering, 120075, 2023.
3. Liu, Y.Y., Luan, Y., Dai, X., Liu, S., Yi, X., Rao, Y., A Numerical Study on Swirling Hot Air Anti-Icing with Various Surface Structures on the Internal Wall, Energies, 16, 1179, 2023.
4. Yeranee, K., Rao, Y., Triply Periodic Minimal Surfaces Thermal Hydraulic Effects, Topic Review, Encyclopedia, 39188, 2023. (https://encyclopedia.pub/entry/39188) 大百科全书
5. Rao, Y., Surface Vortex Structures Featuring Miniature V Rib-Dimple Hybrids Create Highly Effective Heat Transfer & Cooling for Gas Turbine Blades, Advances in Engineering, 2022. (https://advanceseng.com/surface-vortex-structures-featuring-miniature-v-rib-dimple-hybrids-create-highly-effective-heat-transfer-cooling-gas-turbine-blades/) 科研成果被国际知名工程学网站”Advances in Engineering“评选为Mechanical Engineering领域关键性科学文章；全球著名科技媒体网站“工程进展”(Advances in Engineering，AIE)遴选为关键科学文章
6. Yeranee, K., Rao, Y., Heat Transfer and Pressure loss of Turbulent Flow in a Wedge-shaped Cooling Channel with Different Types of Triply Periodic Minimal Surfaces, ASME Journal of Heat Transfer, revised review, HT-22-1796, 2023.
7. Yong Luan, Yu Rao, Hongjie Yan, Experimental and numerical study of swirl impingement cooling for turbine blade leading edge with internal ridged wall and film extraction holes, International Journal of Heat and Mass Transfer, 201 (2023), 123633.
8. Yong Luan, Yu Rao, Chao Xu, Experimental and numerical study on an enhanced swirl cooling with convergent tube wall and local dimple arrangements, International Journal of Thermal Sciences, 185 (2023), 108083.
9. K. Yeranee, Y. Rao, A Review of Recent Investigations on Flow and Heat Transfer Enhancement in Cooling Channels Embedded with Triply Periodic Minimal Surfaces (TPMS), Energies, 15 (2022), 8994.
10. K. Yeranee, Y. Rao, L. Yang, H. Li, Improved Thermal Performance of a Serpentine Cooling Channel by Topology Optimization Infilled with Triply Periodic Minimal Surfaces, Energies, 15 (2022), 8924.
11. Li Yang, Qi Wang, Yu Rao, An Iterative Neural Operator to Predict the Thermo-Fluid Information in Internal Cooling Channels, Journal of Turbomachinery, 2022, 144(12):121005.
12. Kaibin Hu, Cheng Lu, Bocheng Yu, Li Yang*, Yu Rao, Optimization of bionic heat sinks with self-organized structures inspired by termite nest morphologies,International Journal of Heat and Mass Transfer,Volume 202,2023,123735
13. Yeranee, K., Rao, Y., Yang, L., Li, H., Enhanced thermal performance of a pin-fin cooling channel for gas turbine blade by density-based topology optimization, International Journal of Thermal Sciences, 107783, 2022.
14. Yin Xie, Yu Rao, Yuli Cheng, Wei Tian, Investigation into the laminar separation control of airfoils at low Reynolds numbers by dimple vortex generators, Aerospace Science and Technology, Volume 129, October 2022, 107841.
15. Xie, Y., Rao, Y., Zhang, P., Streamwise Evolution of Turbulent Flow and Heat Transfer over Channel Surfaces with V Ribs and V-Rib-Dimple Compound Turbulators, International Journal of Thermal Sciences, Volume 179, September 2022, 107672, 2022.
16. Zhang, P., Rao, Y., Ligrani, P., Experimental study of turbulent flow heat transfer and pressure loss over surfaces with dense micro-depth dimples under viscous sublayer, International Journal of Thermal Sciences, 177, 107581, 2022.
17. Luan, Y., Rao, Y., Weigand, B., Experimental and numerical study of heat transfer and pressure loss in a multi-convergent swirl tube with tangential jets, International Journal of Heat and Mass Transfer, 122797, 2022.
18. Liang, C., Rao, Y., Chen, J., Zhang, P., Experimental and Numerical Study of the Turbulent Flow and Heat Transfer in a Wedge-shaped Channel with Guiding Pin Fin Arrays under Rotating Conditions, ASME Journal of Turbomachinery, 144: 071007, 2022.
19. Luan, Y., Rao, Y., Wang, K., Wu, W., Experimental and numerical study of heat transfer and pressure loss in a swirl multi-pass channel with convergent jet slots, ASME Journal of Turbomachinery, 144: 071006, 2022.
20. Ran, S., Zhang, P., Rao, Y., Numerical study of heat transfer and flow structure over channel surfaces featuring miniature V rib-dimples with various configurations, International Journal of Thermal Sciences, 172, 107342, 2022.
21. 许超, 张鹏, 饶宇. 涡轮叶片内冷表面V肋-凹陷复合流动控制强化传热优化设计[J]. 推进技术. 2023. (已录用, EI)
22. 吕玥萱, 罗稼昊, 饶宇. 涡轮叶片不同肋倾角交错肋冷却流动与传热研究[J]. 工程热物理学报. 2022.（已录用，EI）
23. 吕玥萱, 肖克华, 饶宇. 增材制造高性能微通道换热器模块化单元传热与压损实验[J]. 工程热物理学报. 2022.（已录用，EI）
24. Xiong, C.L., Rao, Y., Luan, Y., 探究椭圆形旋流管型对旋流冷却流动与传热特性的影响, 工程热物理学报，已录用，2022.
25. 楼健,周炜玮,汪奇,杨力*,饶宇.小样本实验数据驱动的发散冷却深度学习模型[J].工程热物理学报, 2022
2021:
122. Zhang, P., Rao, Y. *, Xie, Y. (2021): Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-Shaped Ribs and Dimples, International Journal of Heat and Mass Transfer, 178, 121611, 2021.
121. Liang, C, Rao Y. * (2021): Experimental and Numerical Study of Turbulent Flow and Heat Transfer in a Wedge-shaped Channel with Guiding Pin Fins for Turbine Blade Trailing Edge Cooling, International Journal of Heat and Mass Transfer, 178, 121590, 2021.
120. Zheng, K., Wei, T. *, Zhang, P., Rao, Y., Hu, H. (2021): Experimental study of the turbulent flow and heat transfer behaviors over a micro-rib-dimple-structured surface, ASME Journal of Turbomachinery. 143(10), 101014.
119. Guo, Z., Rao, Y. *, Wang, W. (2021): Experimental and Numerical Investigation of Turbulent Flow Heat Transfer in a Serpentine Channel with Multiple Short Ribbed Passes and Turning Vanes, International Journal of Thermal Sciences, 165, 106931.
118. Luo J., Rao, Y. *, Yang, L., Yang, M., Su, H. (2021): Computational analysis of turbulent flow and heat transfer in latticework cooling structures under various flow configurations, International Journal of Thermal Sciences, 164, 106912.
117. Liu, Y., Rao, Y. *, Yang, L., Xu, Y., Terzis, A. (2021): Flow and heat transfer characteristics of double-wall cooling with multi-row short film cooling hole arrangements, International Journal of Thermal Sciences, 165, 106878.
116. Wang, Q., Yang, L., Rao, Y. * (2021): Establishment of a generalizable model on a small-scale dataset to predict the surface pressure distribution of gas turbine blades, Energy, 214, 118878.
115. Yeranee, K., Rao, Y. * (2021): A review of recent studies on rotating internal cooling for gas turbine blades. Chinese Journal of Aeronautics, 34(7): 85-113.
2020:
114. Rao, Y. *, Zhang, P., Xu, Y., Ke, H. (2020): Experimental study and numerical analysis of heat transfer enhancement and turbulent flow over shallowly dimpled channel surfaces, International Journal of Heat and Mass Transfer, 160, 120195.
113. Liang, C., Rao, Y. * (2020): Computational analysis of rotating effects on heat transfer and pressure loss of turbulent flow in detached pin fin arrays with various clearances. ASME Journal of Heat Transfer, 142(12), 121803.
112. Xie, Y., Rao, Y. *, Li, W., Qin, J. (2020) Experiments and Stress-Blended Eddy Simulations of turbulent flow over edge-rounded dimples, International Journal of Thermal Sciences, 154, 106380
111. Rao, Y. *, Guo, Z., Wang, D. (2020): Experimental and Numerical Study of Heat Transfer and Turbulent Flow Characteristics in Three-short-pass Serpentine Cooling Channels with Miniature W-Ribs, ASME Journal of Heat Transfer. 142(12), 121901
110. Yang, L., Wang, Q., Rao, Y. *. (2020): Searching for irregular pin-fin shapes for high temperature applications using deep learning methods, International Journal of Thermal Sciences, 161, 106746,
109. Yang, L., Wang, Q., Huang, K., Rao, Y. * (2020): Establishment of a long-short-term-memory model to predict film cooling effectiveness under superposition conditions, International Journal of Heat and Mass Transfer, 160, 120231
108. Liang, C., Rao, Y. * (2020): Numerical study of turbulent flow and heat transfer in channels with detached pin fin arrays under stationary and rotating conditions. International Journal of Thermal Sciences, 160, 106659
107. Liu, Y., Rao, Y. *, Yang, L. (2020): Numerical simulations of a double-wall cooling with internal jet impingement and external hexagonal arrangement of film cooling holes, International Journal of Thermal Sciences. 153, 106337
106. 罗稼昊(Luo, J.)，饶宇(Rao, Y. *)，杨力(Yang, L.) (2021): 不同流动配置下涡轮叶片交错肋冷却流动传热特性数值模拟 [Numerical Simulations for Flow and Heat Transfer Characteristics in Different Latticework Cooling Configurations for Gas Turbine Blades]，推进技术 [Journal of Propulsion Technology]，(拟发表于2021年第9期). 42期
105. 阎鸿捷(Yan, H.), 陈冠江(Chen, G.), 饶宇(Rao, Y. *) (2020): 涡轮叶片前缘冲击-气膜冷却流动传热实验 [Experiment on Flow and Heat Transfer of Impingement-film Cooling for Leading Edge of Turbine Blade]. 工程热物理学报 [Journal of Engineering Thermophysics], 41(12), 2970-2976
104. 阎鸿捷(Yan, H.), 陈冠江(Chen, G.), 饶宇(Rao, Y. *) (2021): 涡轮叶片前缘旋流-气膜复合冷却内部流动传热特征实验和数值模拟 [Experiment and Numerical Simulation on Internal Flow and Heat Transfer of Swirling Flow-Film Cooling for Leading Edge of Turbine Blade]. 推进技术 [Journal of Propulsion Technology], 42(3)
103. 郭仲秋(Guo, Z.), 李彦霖(Li, Y.), 饶宇(Rao, Y. *) (2020): 涡轮叶片内部具有扰流肋和导流片的多通道冷却流动与传热特性 [Flow and Heat Transfer Characteristics in Multi-pass Channel Cooling Structure With Ribs and Turning Vanes of Turbine Blades]. 工程热物理学报 [Journal of Engineering Thermophysics], 41(9): 2225-2232
102. 戴维(Dai, W.), 杨力(Yang, L.), 饶宇(Rao, Y. *) (2020): 基于生成对抗网络的涡轮端壁气膜冷却建模方法[Modeling Method of Film Cooling of Turbine Endwall Based on Generative Adversarial Networks].工程热物理学报 [Journal of Engineering Thermophysics],41(10):2420-2424, 2020.
101. 王锴 (Wang, K.)，夏添(Xia, T.)，饶宇(Rao, Y. *) (2020): 三通道旋流冷却流动与传热性能 [Flow Characteristics and Heat Transfer of Swirl Cooling in Three-pass Channel]，上海交通大学学报 [Journal of Shanghai Jiaotong University], 54,(5): 481-490
100. Rao, Y. *, Zhang, P. (2020): Experimental Study of Heat Transfer and Pressure Loss in Channels with Miniature V Rib-Dimple Hybrid Structure, Heat Transfer Engineering, 41(15-16): 1431-1441
99. 汪奇, 杨力,饶宇. 深度学习方法在涡轮冷却中的应用综述, 中国工程热物理学会热机气动热力学会议, 202442, 2020.
98. 刘宇阳，饶宇，具有短气膜孔阵列的双层壁冷却实验与数值计算研究，中国工程热物理学会热机气动热力学会，202097，2020
97. Li Yang, Qi Wang, Yu Rao, Modeling Superposition of Flat Plate Film Cooling under Complicated Conditions Using Recurrent Neural Networks, Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. GT2020-3189.
2019:
96. Zhang, P., Rao, Y. *, Li, Y., Weigand, B. (2019): Heat Transfer and Turbulent Flow Structure in Channels With Miniature V-Shaped Rib-Dimple Hybrid Structures on One Wall, ASME Journal of Heat Transfer, 141, 071903
95. Chen, G., Liu, Y., Rao, Y. *, He, J., Qu, Y. (2019): Numerical investigation on conjugate heat transfer of impingement/effusion double-wall cooling with different crossflow schemes, Applied Thermal Engineering, 155, 515–524
94. Yang, L., Min, Z., Yue, T., Rao, Y.*, Chyu, M.K. (2019): High resolution cooling effectiveness reconstruction of transpiration cooling using convolution modeling method. International Journal of Heat and Mass Transfer, 133, 1134-1144.
93. Li, Y., Rao, Y.*, Wang, D., Wu, X. (2019), Heat transfer and pressure loss of turbulent flow in channels with miniature structured ribs on one wall. International Journal of Heat and Mass Transfer, 131, 584-593.
92. Liu, Y., Rao, Y.*, Weigand, B. (2019): Heat transfer and pressure loss characteristics in a swirl cooling tube with dimples on the tube inner surface. International Journal of Heat and Mass Transfer, 128, 54-65.
91. Yaranee K., Wae-hayee, M. *, Piya, I., Rao, Y., Nuntadusit, C. (2019): Effects of expansion pipe length on heat transfer enhancement of impinging jet array, Journal of Mechanical Science and Technology, 33, 2429-2438
90. 饶宇(Rao, Y.*), 王德强 (Wang, D.), 李彦霖(Li Y.) (2019): 涡轮叶片内部多通道微小扰流肋冷却流动传热实验研究[Study of Heat Transfer and Pressure Loss in Multi-pass Cooling Passages With Micro-ribs for Turbine Blade]. 工程热物理学报 [Journal of Engineering Thermophysics], 40(10):2321-2326.
89. Wae-hayee, M. *, Yeranee, K., Piya, I., Rao, Y., Nuntadusit, C. (2019): Heat transfer correlation of impinging jet array from pipe nozzle under fully developed flow, Applied Thermal Engineering, 154, 37–45
88. Y.Y. Liu, Y. Rao, L. Yang. Flow and Heat Transfer Characteristics of a Double-Wall Cooling System with a Hexagonal Film Hole Arrangement[C]. International Gas Turbine Congress, Tokyo, Japan, 2019. IGTC2019-11
87. Yin Xie, Yu Rao. Numerical Study of Heat Transfer Enhancement of the Channel with Optimized V-Shaped Ribs and Dimples[C]. International Gas Turbine Congress, Tokyo, Japan, 2019. IGTC2019-17
86. Ce Liang, Yu Rao. A Numerical Study of the Flow and Heat Transfer in Channels with the Detached Pin Fin Arrays[C]. International Gas Turbine Congress, Tokyo, Japan, 2019. IGTC2019-20
85. Bi J, Zhang P, Rao Y. A Numerical Simulation of Rotating Channel with a V Rib-Dimple Hybrid Structure[C]. Proceedings of Global Power and Propulsion Society, Beijing, China, 2019. GPPS-0031
84. Yang, L.*, Rao, Y. (2019): Predicting the adiabatic effectiveness of effusion cooling by the convolution modeling method, Proceedings of ASME Turbo Expo at Phoenix, U.S.A, June 2019, GT2019-90162, accepted. (publisher's declaration of acceptance enclosed)
83. 冉霜叶, 张鹏, 饶宇. 微小V肋-凹陷复合冷却流动与传热数值模拟:肋高与凹陷深度的影响[C]. 中国工程热物理学会热机气动热力学和流体机械学术会议, 中国北京, 2019.
82. 阎鸿捷, 陈冠江, 饶宇. 涡轮叶片前缘冲击-气膜冷却流动传热实验[C]. 中国工程热物理学会热机气动热力学和流体机械学术会议, 中国北京, 2019.
81. 戴维, 杨力, 饶宇. 基于生成对抗网络的涡轮端壁气膜冷却建模方法[C]. 中国工程热物理学会热机气动热力学和流体机械学术会议, 中国北京, 2019
2018:
80. Rao, Y. *, Liu, Y., Wan, C. (2018): Multiple-jet impingement heat transfer in double-wall cooling structures with pin fins and effusion holes. International Journal of Thermal Sciences, 133, 106-119.
79. Rao, Y.* (2018): Jet impingement heat transfer in narrow channels with different pin fin configurations on target surfaces. ASME Journal of Heat Transfer, 140, 072201.
78. Biegger, C.*, Rao, Y., Weigand, B. (2018): Flow and heat transfer measurements in swirl tubes with one and multiple tangential inlet jets for internal gas turbine blade cooling. International Journal of Heat and Fluid Flow, 73, 174-187.
77. 饶宇(Rao, Y.*), 刘宇阳(Liu, Y.), 万超一(Wan, C.) (2018): 具有气膜出流孔和针肋的双层壁冷却结构内冲击传热性能研究 [Jet impingement heat transfer in a double-wall cooling structure with pin fins and film effusion holes]. 航空学报 [Acta Aeronautica et Astronautica Sinica], 39, 121418.
76. 夏添(Xia, T.), 刘宇阳(Liu, Y.), 饶宇(Rao, Y.*), 陈冠江(Chen, G.) (2018): 具有微小针肋阵列靶板表面冲击传热性能研究 [A study of jet impingement heat transfer performance on roughened target surface with miniature pin fins]. 工程热物理学报 [Journal of Engineering Thermophysics], 39, 1-9.
75. 李彦霖(Li, Y.), 饶宇(Rao, Y.*), 王德强(Wang, D.) (2018): 涡轮叶片冷却通道高性能微小肋湍流传热的实验与数值研究 [Experimental and numerical study on heat transfer and friction of micro-ribs in turbine blade internal passage]. 工程热物理学报 [Journal of Engineering Thermophysics], 39:55-61.
74. Wei Tian; Kuan Zheng; Yu Rao; Peng Zhang; Hui Hu; An experimental study on the flow characteristics over a micro rib-dimple structured surface, 5th International Conference on Experimental Fluid Mechanics, Munich, Germany, 2018.
73. Zhang, P., Rao, Y.*, Li, Y. (2018): A numerical study of heat transfer and flow structure in channels with miniature v rib-dimple hybrid structure on one wall. Proceedings of ASME Turbo Expo at Oslo, Norway, June 2018, GT2018-75929.
72. Liu, Y., Xia, T., Rao, Y.*, Weigand, B. (2018): Numerical analysis of thermal performance of a swirl cooling tube with dimples at the wall. Proceedings of International Heat Transfer Conference at Beijing, China, August 2018, IHTC16-22829.
71. Chen, G., Liu, Y., Rao, Y.* (2018): A Numerical investigation on internal heat transfer in jet impingement/effusion cooling in a narrow channel. Proceedings of International Heat Transfer Conference at Beijing, China, August 2018, IHTC16-21397.
70. Liang, C., Rao, Y.* (2018): 旋转条件下叶片尾缘分离式针肋冷却通道流动与传热特性数值研究 [A numerical study of flow and heat transfer performance in detached pin fin channels for turbine blade trailing edge cooling under rotation]. 中国工程热物理学会气动热力学会议 [[Proceedings of Chinese National Conference on Aero-thermodynamics in Xi’an, China, October 2018], 2018178.
69. Rao, Y.*, Wang, D.Q., Li, Y.L. (2018): 涡轮叶片内部多通道微小扰流肋冷却流动与传热实验研究 [Experimental study of flow and heat transfer in multi-pass internal cooling passages with miniature rib turbulators for turbine blades]. 中国工程热物理学会气动热力学会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Xi’an, China, October 2018], 2018198.
2017:
68. Rao, Y.*, Biegger, C., Weigand, B. (2017): Heat transfer and pressure loss in swirl tubes with one and multiple tangential jets pertinent to gas turbine internal cooling. International Journal of Heat and Mass Transfer, 106, 1356–1367.
67. Feng, Y., Cao, J., Qin, J.*, Rao, Y. (2017): Flow and heat transfer characteristics of supercritical hydrocarbon fuel in minichannels with dimples. ASME Journal of Heat Transfer, 139, 122401.
66. 李文灿(Li, W.), 饶宇(Rao, Y.*), 李博(Li, B.), 秦江(Qin, J.) (2017): 具有边缘倒圆凹陷涡发生器换热性能实验 [Experimental of turbulent flow heat transfer of dimple vortex generators with rounded edge]. 航空学报 [Acta Aeronautica et Astronautica Sinica], 38, 520999.
65. 王德强(Wang, D.), 饶宇(Rao, Y.*), 张鹏(Zhang, P.), 许亚敏(Xu, Y.) (2017): 涡轮叶片内冷通道高性能肋湍流传热与流阻实验研究 [Experimental study of flow and heat transfer of high-performance ribs for internal cooling of gas turbine blades]. 工程热物理学报 [Journal of Engineering Thermophysics], 39, 1-7.
64. 陈鹏(Chen, P.), 饶宇(Rao, Y.*), 万超一(Wan, C.Y.) (2017): 具有微小W肋的结构化表面冲击冷却实验研究 [Impingement heat transfer and flow characteristics on the surface with micro W-shaped ribs]. 航空动力学报 [Journal of Aerospace Power], 32, 2110-2117.
63. 杨云(Yang, Y.), 张鹏(Zhang, P.), 饶宇(Rao, Y.*) (2017): 凹陷涡发生器非稳态流动与传热分离涡模拟 [A DES of unsteady flow and heat transfer in dimple vortex generators]. 工程热物理学报 [Journal of Engineering Thermophysics], 38, 1196-1202.
62. Rao, Y.*, Liu, Y. (2017): Experimental investigation of heat transfer characteristics in jet impingement cooling system with pin fins and film cooling holes, Proceedings of Global Power and Propulsion Forum in Shanghai, China, October 2017], GPPS-2017-30.
61. Rao, Y.*, Zhang, P. (2017): Experimental study of heat transfer and pressure loss in channels with miniature v rib-dimple hybrid structure. Proceedings of 13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Portoroz, Slovenia, July 2017, HEFAT2017-1570345913.
60. Xia, T., Liu, Y., Rao, Y.*, Chen, G.J. (2017): 具有微小针肋阵列靶板表面冲击传热性能研究 [A study of jet impingement heat transfer on surfaces with miniature pin fins]. 中国工程热物理学会气动热力学会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Zhenjiang, China, October 2017], 20172147.
59. Zhang, P., Rao, Y.* (2017): 凹陷与微小V肋复合结构冷却通道内传热与流动结构数值计算研究 [Numerical study of heat transfer and flow structure in cooling channels with dimples and miniature V rib-dimple hybrid structure], 中国工程热物理学会气动热力学会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Zhenjiang, China, October 2017], 20172148.
58. Li, Y.L., Rao, Y.*, Wang, D.Q. (2017): 涡轮叶片冷却通道高性能微小肋湍流传热的数值研究 [Numerical study on heat transfer and friction of micro-ribs in turbine blade internal passage]. 中国工程热物理学会传热传质会议 [Proceedings of Chinese National Conference on Heat and Mass Transfer in Suzhou, China, October 2017], 173118.
2016:
57. Rao, Y.*, Chen, P., Wan, C.Y. (2016): Experimental and numerical investigation of impingement heat transfer on the surfaces with micro W-shaped ribs. International Journal of Heat and Mass Transfer, 93, 683-694.
56. 饶宇(Rao, Y.*), 万超一(Wan, C.Y.), 陈鹏(Chen, P.) (2016): 具有针肋的狭窄空间冲击冷却实验和数值计算 [Experimental and numerical study of jet impingement cooling in narrow channels with pin fins]. 航空动力学报 [Journal of Aerospace Power], 31, 1852-1859.
55. 万超一(Wan, C.Y.), 饶宇(Rao, Y.*), 陈鹏(Chen, P.) (2016): 狭窄通道具有针肋的表面冲击冷却实验研究 [Experimental study of jet impingement heat transfer on the surface with pin fins in narrow channels]. 工程热物理学报 [Journal of Engineering Thermophysics], 37, 2000-2006.
54. 邢建峰 (Xing, J.), 饶宇(Rao, Y.*), 李博(Li, B.) (2016): 具有微小V肋-凹陷复合结构表面湍流传热实验研究 [Experimental study of turbulent flow heat transfer over the surface with miniature V rib-dimple hybrid structures]. 上海交通大学学报 [Journal of Shanghai Jiao Tong University], 51, 40-48.
53. 杨云(Yang, Y.), 饶宇(Rao, Y.*) (2016): 不同深度凹陷涡发生器内湍流流动与传热性能的数值计算研究 [A numerical study of turbulent flow and heat transfer in dimples with different depths]. 上海交通大学学报 [Journal of Shanghai Jiao Tong University], 51, 18-25.
52. Zhou, W., Rao, Y.*, Hu, H. (2016): An experimental investigation on the characteristics of turbulent boundary layer flows over a dimpled surface. ASME Journal of Fluids Engineering, 138, 021204.
51. Rao, Y.*, Wan, C., Liu, Y. (2016): An experimental investigation of impingement heat transfer in narrow space with full-height pin fins. Proceedings of ASME Turbo Expo in Seoul, Korea, June 2016, GT2016-57578.
50. Yang, Y., Zhang, P., Rao, Y.*, Li, W.C. (2016): 凹陷涡发生器非稳态传热机理及流动特性研究 [Study of unsteady flow and heat transfer characteristics in dimple vortex generators]. 中国工程热物理学会气动热力学会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Wuxi, China, October 2016], 162111.
49. Wang, D.Q., Rao, Y.*, Zhang, P., Xing, J. (2016): 高性能肋的传热与流动性能实验和数值计算研究 [Experimental and numerical study of flow and heat transfer performance in channels with high-performance ribs]. 中国工程热物理学会气动热力学会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Wuxi, China, October 2016], 162010.
48. Li, W.C., Yang, Y., Rao, Y.* (2016): 凹陷表面湍流流动与传热性能数值计算 [Numerical simulations of turbulent flow and heat transfer over dimpled surface]. 中国工程热物理学会传热传质会议 [Proceedings of Chinese National Conference on Aero-thermodynamics in Beijing, China, October 2016], 163057.
47. Rao, Y.*, Yang, Y., Li, W.C. (2016): 不同深度凹陷涡发生器内湍流传热与流阻性能 Turbulent flow heat transfer and pressure loss of dimple vortex generators with various depths. 中国航天第三网第三十七届技术交流会 [37th Symposium of Chinese Aerospace Technology in Xi’an, China, October 2016], 243.
2015:
46. Rao, Y.*, Feng, Y., Li, B., Weigand, B. (2015): Experimental and numerical study of heat transfer and flow friction in channels with dimples of different shapes. ASME Journal of Heat Transfer, 137, 031901.
45. Wan, C.Y., Rao, Y.*, Chen, P. (2015): Numerical predictions of jet impingement heat transfer on square pin-fin roughened plates. Applied Thermal Engineering, 80, 301-309.
44. 饶宇(Rao, Y.*), 李博(Li, B.), 冯岩(Feng, Y.) (2015): 球形和泪滴形凹陷涡发生器传热实验和数值计算 [Experimental and numerical study of heat transfer performance of spherical and teardrop-shaped dimple vortex generators], 工程热物理学报 [Journal of Engineering Thermophysics], 36, 1774-1779.
43. 李博(Li, B.), 饶宇(Rao, Y.*), 陈鹏(Chen, P.) (2015): 应用瞬态液晶热像研究凹陷涡发生器传热性能 [Study of heat transfer characteristics of dimple vortex generators using transient liquid crystal thermography]. 工程热物理学报 [Journal of Engineering Thermophysics], 36, 2356-2360.
42. 冯岩(Feng, Y.), 饶宇(Rao, Y.*), 李博(Li, B.) (2015): 凹陷涡发生器形状对湍流流动与传热性能的影响 [Influences of dimple shapes on turbulent flow and heat transfer], 上海交通大学学报 [Journal of Shanghai Jiao Tong University], 49, 614-619.
41. Rao, Y.*, Wan, C.Y., Chen, P. (2015): 具有针肋扰流的狭窄空间冲击冷却实验研究 [Experimental study of jet impingement cooling in narrow space with pin fins]. 中国航空学会十八届燃烧与传热传质交流会 [Proceedings of 18th symposium of combustion and heat transfer of Chinese aerospace society in Nanjing, China, November 2015], 102.
40. Wan, C.Y., Chen, P., Rao, Y.* (2015): 具有针肋扰流的狭窄空间冲击冷却数值计算研究 [Numerical study of jet impingement cooling in narrow space with pin fins]. 中国工程热物理学会传热传质年会 [Proceedings of Chinese National Conference on Heat and Mass Transfer in Qingdao, China, October 2015], 153576.
39. Rao, Y.*, Chen, P., Zhu, J.Q. (2015): An experimental study of impingement heat transfer on the surfaces with micro V ribs. Proceedings of ASME Turbo Expo in Montreal, Canada, June 2015, GT2015-42573.
2014:
38. Rao, Y.*, Li, B., Feng, Y. (2014): Heat Transfer of Turbulent Flow over Surfaces with Spherical Dimples and Teardrop Dimples. Experimental Thermal and Fluid Science, 61, 201-209.
37. Rao, Y.*, Zang, S. (2014): Flow and heat transfer characteristics in latticework cooling channels with dimple vortex generators. ASME Journal of Turbomachinery, 136, 021017.
36. 饶宇(Rao, Y.*), 李麟(Li, L.) (2014): 具有柱肋阵列与分离式柱肋阵列的冷却通道内流动与传热性能实验研究 [Experimental study of pressure loss and heat transfer performance in channels with pin fins and detached pin fins]. 上海交通大学学报 [Journal of Shanghai Jiao Tong University], 48, 782-787.
35. 李麟(Li, L.), 饶宇(Rao, Y.*), 万超一(Wan, C.) (2014): 狭缝宽度对分离式柱肋冷却通道内传热与流动影响的数值计算研究 [Numerical study of effects of slot spacing on heat transfer and flow in cooling channels with detached pin fins]. 上海交通大学学报 [Journal of Shanghai Jiao Tong University], 48, 756-760.
34. Zhou, W., Rao, Y.*, Hu, H. (2014): An experimental investigation on the flow characteristics over dimple arrays pertinent to internal cooling of turbine blades. Proceedings of ASME Joint US-European Fluids Engineering Division Summer Meeting in Chicago, USA, August 2014, FEDSM2014-21268.
2013:
33. 张翔(Zhang, X.), 饶宇(Rao, Y.*) (2013): 具有凹陷涡发生器的网格冷却结构内流动与传热特性研究 [Study of flow and Heat transfer in latticework cooling with dimples]. 航空动力学报 [Journal of Aerospace Power], 28, 1503-1509.
32. 许亚敏(Xu, Y.), 饶宇(Rao, Y.*) (2013): 液晶热像测量精度分析及其在湍流传热研究中的应用 [Measurement accuracy and application of liquid crystal thermography technique in turbulent flow heat transfer study].上海交通大学学报 [Journal of Shanghai Jiao Tong University], 47, 1185-1190.
31. Rao, Y.*, Zhang, X., Zang, S. (2013): Flow and heat transfer characteristics in latticework cooling channels with dimple vortex generators. Proceedings of ASME Turbo Expo 2013 in San Antonio, USA, June 2013, GT2013-95237.
30. Wan, C., Rao, Y.* (2013): Numerical investigation of impingement heat transfer on a flat and square pin-fin roughened plates. Proceedings of ASME Turbo Expo in San Antonio, USA, June 2013, GT2013-94473.
29. Rao, Y.*, Xu, Y. (2013): An analysis of liquid crystal thermography measurement uncertainty and its application to turbulent heat transfer measurements. Proceedings of ASME Fluids Summer Meeting in Incline Village, USA, July 2013, FEDSM2013-16420.
2012:
28. Rao, Y.*, Wan, C., Xu, Y. (2012): An experimental study of pressure loss and heat transfer in the pin fin-dimple channels with various dimple depths. International Journal of Heat and Mass Transfer, 55, 6723-6733.
27. Rao, Y.*, Wan, C., Zang, S. (2012): An experimental and numerical study of the flow and heat transfer in channels with pin fin-dimple combined arrays of different configurations. ASME Journal of Heat Transfer, 134, 121901, 2012.
26. Rao, Y.*, Xu, Y., Wan, C. (2012): An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays. Experimental Thermal and Fluid Science, 38, 237-247.
25. Rao, Y.*, Xu, Y., Wan, C. (2012): A numerical study of the flow and heat transfer in the pin fin-dimple channels with various dimple depths. ASME Journal of Heat Transfer, 134, 071902.
24. Rao, Y.*, Xu, Y. (2012), Liquid Crystal Thermography Measurement Uncertainty Analysis and Its Application to Turbulent Heat Transfer Measurements. Advances in Condensed Matter Physics, 2012, 898104.
23. 万超一(Wan, C.), 饶宇(Rao, Y.*), 许亚敏(Xu, Y.) (2012): 缝槽入口形状对气膜冷却性能的影响 [A numerical study of the effects of the slot geometry on the film cooling performance]. 上海交通大学学报 [Journal of Shanghai Jiaotong University], 46, 550-555.
22. Rao, Y.*, Zhang, X. (2012): Pressure loss and heat Transfer in channels with pin fin-dimple combined arrays for gas turbine cooling application. Proceedings of Asian Congress on Gas Turbines in Shanghai, China, August 2012, ACGT2012-4095.
2011:
21. Rao, Y.*, Wan, C., Xu, Y., Zang, S. (2011): Spatially-resolved heat transfer characteristics in channels with pin fin and pin fin-dimple arrays. International Journal of Thermal Sciences, 50, 2277-2289.
20. Rao, Y.*, Wan, C., Xu, Y., Zang, S. (2011): Local heat transfer characteristics in channels with pin fin and pin fin-dimple arrays, Proceedings of ASME Turbo Expo in Vancouver, Canada, June 2011, GT2011-45449.
2010:
19. Rao, Y.*, Zang, S. (2010): Calibrations and the measurement uncertainty of wide-band liquid crystal thermography. Measurement Science and Technology, 21, 015105.
18. Rao, Y.*, Zang, S., Wan, C. (2010): Effect of coating thickness on the calibration and measurement uncertainty of a wide-band liquid crystal thermography. Chinese Optics Letters, 8, 395-397.
17. Rao, Y.*, Wan, C., Zang, S. (2010): Comparisons of flow friction and heat transfer performance in rectangular channels with pin fin-dimple, pin fin and dimple arrays. Proceedings of ASME Turbo Expo in Glasgow, U.K., June 2010, GT2010-22442.
2009:
16. Rao, Y.*, Wan, C., Zang, S. (2009): Transitional Flow and heat transfer Characteristics in a rectangular duct with stagger-arrayed short pin fins. Chinese Journal of Aeronautics, 22, 237-242.
15. Rao, Y.*, Zang, S., Huang, M. (2009): A Liquid Crystal Thermography Calibration with True Color Image Processing. Chinese Optics Letters, 7, 723-725.
14. Rao, Y.*, Wan, C., Zang, S. (2009): An experimental study of transitional flow friction and heat transfer performance of a channel with staggered arrays of mini-scale short pin fins. Proceedings of ASME Turbo Expo in Orlando, U.S.A., June 2009, GT2009-59341.
13. Rao, Y.*, Wan, C., Zang, S. (2009): 针肋－凹陷复合结构通道内流阻和对流传热性能实验研究 [An experimental study on the flow friction and heat transfer in channels with pin fin-dimple combined arrays]. 中国工程热物理学会传热传质年会 [Proceedings of Chinese National Conference on Heat and Mass Transfer in Qingdao], China, October 2009, 093393.
12. Wan, C., Rao, Y.*, Zang, S. (2009): 针肋-凹陷复合通道流动和传热性能的数值模拟:凹陷深度的影响 [A numerical simulation on the flow and heat transfer in in channels with pin fin-dimple combined arrays]. 中国工程热物理学会传热传质年会 [Proceedings of Chinese National Conference on Heat and Mass Transfer in Qingdao], China, October 2009, 093533.
2007:
11. Rao, Y., Dammel, F., Stephan, P.*, Lin, G. (2007): Convective heat transfer characteristics of microencapsulated phase change material suspension in minichannels. Heat and Mass Transfer, 44, 175-186.
10. Rao, Y.*, Lin, G., Luo, Y. (2007): Preparation and thermal properties of microencapsulated phase change material for enhancing fluid flow heat transfer. Heat Transfer-Asian Research, 36, 28-37.
9. Rao, Y.*, Dammel, F., Stephan, P., Lin, G. (2007): Flow frictional characteristics of MEPCM suspensions flowing through rectangular minichannels. Science in China Series E: Technological Sciences, 49, 445-456.
8. Rao, Y.*, Dammel, F., Stephan, P. (2007): Experiments on the cooling performance of microencapsulated phase change material suspension flow in rectangular minichannels. Proceedings of ASME-JSME Thermal Engineering Summer Heat Transfer Conference in Vancouver, Canada, June 2007, HT07-32116.
7. Rao, Y.*, Dammel, F., Stephan, P. (2007): Experiments on microencapsulated phase change material suspension flow in rectangular minichannels. Proceedings of ASME-JSME Thermal Engineering Summer Heat Transfer Conference in Vancouver, Canada, June 2007, HT07-32114.
2006:
6. 饶宇(Rao, Y.*), Dammel, F., Stephan, P., 林贵平(Lin, G.) (2006): 相变材料微胶囊悬浮液在矩形小通道内层流流动传热的实验研究 [An experimental study of the flow heat transfer of microencapsulated phase change material suspension through rectangular minichannels]. 航空动力学报 [Journal of Aerospace Power], 21, 1012-1020.
2005:
5. 饶宇(Rao, Y.*), 林贵平(Lin, G.), 罗燕(Luo, Y.) 王亮(Wang, L.) (2005): 应用于强化传热的相变材料微胶囊的制备及特性 [Preparation processes and thermal properties of microencapsulated phase change material for the fluid flow heat transfer enhancement application]. 航空动力学报 [Journal of Aerospace Power], 20, 651-655.
4. Dammel, F., Rao, Y., Stephan, P.* (2005): Waermeuebertragung auf durch Minikanaele stroemende Suspension mit mikrogekapseltem Phasen-Wechsel-Material. Proceedings of VDI-FA-Sitzungen “Waerme- und Stoffuebertragung” und “Computational Fluid Dynamics” in Jena, Germany, June 2005.
3. Rao, Y.*, Dammel, F., Stephan, P., Lin, G. (2005): Flow frictional characteristics of MEPCM suspension flowing through rectangular minichannels. Proceedings of the 5th International Symposium on Multiphase Flow, Heat and Mass Transfer and Energy Conversion in Xi’an, China, July 2005, No.119.
2003:
2. Rao, Y. *, Lin, G. (2003): Numerical simulation on phase-change heat transfer within microencapsulated phase chang
京公网安备 11010802027423号