近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Ma, H.*, Zeng, W., Jiang, H., Hong, J., 2022, "Impact of Cooling Injection on Shock Wave over a Flat Tip in High Pressure Turbine", ASME Journal of Turbomachinery, Vol. 144, No. 1, pp. 011012 (13 pages)
2. Ma, H.*, He, L., Yu, G., Yu, Z., 2022, “Natural Convection Heat Transfer and Fluid Flow in a Thermal Chimney With Multiple Horizontally-aligned Cylinders”, International Journal of Heat and Mass Transfer, Vol. 183, Part C, pp. 122239 (13 pages)
3. Ma, H.*, and He, L., 2021, “Large Eddy Simulation of Natural Convection Heat Transfer and Fluid Flow around a Horizontal Cylinder,” International Journal of Thermal Sciences, Vol. 162, pp. 106789 (15 pages).
4. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052506 (9 pages).
5. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2017, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 5, pp. 052507 (9 pages).
6. Ma, H., Wang, Z., Wang, L., Zhang Q.*, Yang Z., and Bao Y., 2016, "Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty," AIAA Journal of Propulsion and Power, Vol. 32, No. 5, pp. 1190-1198.
7. Lu, S.*, Ma, H., Zhang, Q., Teng, J., 2020, "Cutback Squealer Tip Trailing Edge Cooling Performance," International Journal of Heat and Mass Transfer, Vol. 154, pp. 119632 (15 pages).
8. Zhong, F., Zhou, C.*, Ma, H., and Zhang, Q., 2017, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 139, No. 1, pp. 012605 (11 pages).
9. Ma H.*, Zeng W., Dai S., Jiang H., 2022, "Sensitivity of Adiabatic Cooling Effectiveness to Mainstream and Coolant Temperatures in Transonic Flow Over an Idealized Blade Tip Model," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82778 (recommended to ASME Journal of Turbomachinery).
10. Ma H.*, Liu Y., Lai Y., Ouyang H., Ning J., Jiang X., Xu Q., 2022, "Magnetic Resonance Velocimetry of A Turbine Blade With Engine Representative Internal and Film Cooling Structures," ASME Turbo Expo Conference, Rotterdam, The Netherlands, Paper No. GT2022-82849 (recommended to ASME Journal of Turbomachinery).
11. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L., 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 1: Experimental Heat Transfer Results and CFD Validation,” ASME Turbo Expo Conference, Seoul, South Korea, Paper No. GT2016-57579.
12. Ma, H., Zhang, Q.*, He, L., Wang, Z., and Wang, L, 2016, “Cooling Injection Effect on a Transonic Squealer Tip - Part 2: Analysis of Aerothermal Interaction Physics,” ASME Turbo Expo Best Paper Award, Seoul, South Korea, Paper No. GT2016-57587.
13. Ma, H., Wang, Z., Wang, L., Zhang, Q.*, Yang, Z., and Bao, Y., 2015, “Ramp Heating in High-Speed Transient Thermal Measurement with Reduced Uncertainty,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43012.
14. Zhu, D., Lu, S., Ma, H., Zhang, Q., Teng, J., 2017, “Rotating Effect on Transonic Squealer Tip Cooling Performance,” ASME Turbo Expo Conference, Charlotte, US, Paper No. GT2017-64293.
15. Zhong, F., Zhou, C.*, Ma, H., and Zhang, Q., 2016, “Heat Transfer on Winglet Tips in a Transonic Turbine Cascade,” ASME Turbo Expo Conferenc, Seoul, South Korea, Paper No. GT2016-56804
16. Zhang, X., Yang, Z., Tian, S., and Ma, H., 2015, “Numerical Study of the Film Cooling With Discrete Hole Arrangement on a Cutback Squealer Turbine Blade Tip,” ASME Turbo Expo Conference, Montreal, Canada, Paper No. GT2015-43877
17. Ma, H.*, He, L., Rane, S., 2019, “Heat Transfer-Fluid Flow Interaction in Natural Convection around Heated Cylinder and Its Thermal Chimney Effect,” International Conference on Innovative Applied Energy, Oxford, UK
18. Rane, S., He, L., Ma, H., 2019, "CFD modelling and analysis of Two-Phase Geothermal Energy Turbine in Project Combi-Gen," International Conference on Innovative Applied Energy, Oxford, UK
19. Burnside, N., Rane, S., Yu, G., Ma, H., Montcoudiol, N., Li, W., Teklemariam, E., Boyce, A., He, L., Yu, Z., 2019, "Geothermally Sourced Combined Power and Freshwater Generation for Eastern Africa," European Geothermal Congress, Den Haag, Netherlands
20. 王维杰,卢少鹏,马海腾,张强,滕金芳,余文胜.高压涡轮尾切凹槽叶尖冷却换热特性[J].航空动力学报,2019,34(10):2131-2139.
京公网安备 11010802027423号