李大永 - 上海交通大学 - 机械与动力工程学院

当前位置： X-MOL首页 › 全球导师 › 国内导师 › 李大永

李大永教授收藏完善纠错
上海交通大学机械与动力工程学院
登录后才能查看导师的联系方式，马上登录...

个人简介

教育背景 1997-2000 吉林工业大学博士 1994-1997 吉林工业大学硕士 1990-1994 吉林工业大学学士工作经历 2017.01- 上海交通大学机械与动力工程学院长聘教授 2008.12-2016.12 上海交通大学机械与动力工程学院教授 2002.09-2008.12 上海交通大学机械与动力工程学院副教授 2000.09-2002.08 上海交通大学塑性成形工程系博士后 2007.10-2008.03 美国密西根大学、美国福特汽车研究院访问学者 2014.12-2015.11 美国俄亥俄州立大学访问学者出访及挂职经历 2007 访问密西根大学、美国福特汽车公司研究与创新中心 2008 访问美国福特汽车公司研究与创新中心 2010 参加NUMIFORM2010国际会议 2011 参加ICTP2011国际会议、访问美国福特汽车公司研究与创新中心 2012 访问美国福特汽车公司研究与创新中心 2014 参加NUMISHEET2014国际会议 2015 访问美国俄亥俄州立大学 2016 参加NUMISHEET2016国际会议 2017 参加Int. Conf. Plasticity, Damage & Fracture2017国际会议 2017 访问University Michigan, Northwestern University, Lawrence Berkeley National Laboratory. 2018 访问美国俄亥俄州立大学 2018 参加Int. Conf. Plasticity, Damage & Fracture2018国际会议 2018 参加NUMISHEET2018国际会议 2018 参加ICAS2018国际会议 2019 参加NUMIFORM2019国际会议科研项目 1）2005-2007，国家自然科学基金项目“镁合金板材大变形成形机制与过程模拟研究”，负责人。 2）2007-2010，国家自然基金重点项目，“材料智能化近终成形加工技术的若干基础问题”，主要参加人。 3）2002-2005，国家863计划重点项目“高强高韧镁合金及其应用技术研究”，主要参加人。 4）2008-2009，上海市创新科技支撑计划项目子课题 “薄带连铸带钢力学性能及表面裂纹形成机理研究”，负责人。 5）2008-2010，教育部新世纪优秀人才计划项目 “镁合金板材变形机理与成形性能的宏微观研究”，负责人。 6）2009-2011，上海市重点基础研究项目 “ERW焊管排辊成形理论与工艺设计方法研究”，负责人。 7）2006-2008，上海市科教兴市重大产业科技攻关子课题 “先进高强钢动态力学行为及其使用特性研究”，负责人。 8）2005-2006，上海市科委国际合作项目 “基于辊弯成形全流程动态模拟的辊形与工艺优化技术研究”，负责人。 9）2006-2008，上海市启明星计划项目“辊弯成形动态模拟与智能优化关键技术研究”，负责人。 10）2003-2006，上海市重点基础研究项目，“镁合金板材变形机理及温热冲压成形性能研究”，主要参加人。 11）2012-2013，宝钢公司委托项目“UOE钢管成型有限元仿真系统开发”，负责人。 12）2009-2011,美国福特汽车公司University Research Project (URP)项目“Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming-Stage II”, 负责人。 13）2006-2013，日本大金空调公司委托项目“Research on Plastic Forming of Heat Exchangers”，负责人。 14）2012-2015，国家自然科学基金“基于多晶体塑性本构模型的镁合金板材成形极限研究，负责人。 15）2013-2015，美国福特汽车公司University Research Project (URP)项目“Life Assessment of Spot Welds based on Crack Propagation”, 负责人。 16) 2017-2020, 国家自然科学基金“镁合金多晶体塑性－动态再结晶自洽集成计算模型”，负责人。 17）2016-2017, 美国福特汽车公司项目 ”Fatigue Assessment and CAE Modeling of Mechanical and Adhesive Bonded Spot Joints“，负责人。 18) 2017-2018, 宝钢股份公司项目“变截面辊冲成形工艺变形机理及成形实验研究”，负责人。 19) 2019-2021, 国家自然科学基金“超高强汽车车身结构件辊－冲复合成形基础及应用研究”，负责人。 20）2019-2021, 美国福特汽车公司URP项目： 3D打印材料的疲劳分析与建模（Fatigue Assessment and CAE Modeling of 3D printed Metals），负责人。 21）2022-2025 国家自然科学基金项目“铝合金大型复杂型材构件整体成形制造全流程多尺度模拟与形性精准调控基础研究”，负责人。 22）2021-2022 企业委托项目“具有多腔截面的钢制液冷板辊压成形工艺开发”。 23）2022-2024 医工交叉项目“基于多尺度计算和机器学习的骨质疏松椎体治疗用个性化仿生骨水泥研究” 24）2021-2023 企业委托项目“炒菜机器人开发” 教学工作 1、课程名称：现代CAE技术及应用授课对象：硕士生学时数： 36 学分：2 2.课程名称：工程材料授课对象：本科生学时数：51 学分：3 3.课程名称：机械优化方法授课对象：本科生学时数：51 学分：3 软件版权登记及专利 1、专利名称：基于数值仿真与决策树算法的塑性成形工艺规则获取方法授权号：ZL200510024029.4 2、专利名称：镁合金板材变压边力差温拉延方法授权号：ZL200610117575.7 3、专利名称：冷弯型钢成形过程中截面轮廓形状的测量方法授权号：ZL200710046466.5 4、专利名称：横向加载下换热器波纹翅片垂向强度的测量装置授权号：ZL200710042300.6 5、专利名称：镁合金板材差温拉延模具授权号：ZL 200610117578.0 6、专利名称：直缝焊管排辊成形机组全流程自动化参数建模方法授权号：ZL 200710170759.4 7、软件名称：钢管成型计算模型的自动化参数生成系统登记号：2007SR08095 8、软件名称：塑性成形仿真结果智能分析系统登记号：2007SR08144 9、软件名称：金属连续塑性成型CAD模型参数生成系统登记号：2007SR08145 10、软件名称：金属材料塑性成形微观组织分析系统登记号：2008SR07604 11、软件名称： ERW工艺参数管理设计系统登记号：2008SR04698 荣誉奖励 2009 上海青年科技启明星跟踪计划 2007 教育部新世纪优秀人才 2007 　上海市科技进步一等奖 2006 上海市青年科技启明星计划 2010 上海市青年科技启明星跟踪计划 2011 学院最受欢迎的研究生导师 2011 上海国际工业博览会铜奖 2013 教育部科技进步一等奖 2014 国家科技进步二等奖 2015 上海国际工业博览会创新奖 2017 Outstanding reviewer - Materials Science & Engineering A、　　　　Outstanding reviewer - Applied Thermal Engineering 　　　　Outstanding reviewer - International Journal of Plasticity 2021 学院最受欢迎教师奖

研究领域

塑性成形理论、工艺技术与装备材料基因组理论与方法－多尺度建模与计算、智能化成形技术机械设计与成形制造中的 CAD/CAE/人工智能应用技术

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

1.Yuanzhe Hu, Guowei Zhou, Xini Yuan, Dayong Li, Lingyong Cao, Wen Zhang, Peidong Wu. An artificial neural network-based model for roping prediction in aluminum alloy sheet. Acta Materialia 245 (2023) 118605. 2.Hao Yang, Guowei Zhou, Huamiao Wang, Peidong Wu, Myoung-Gyu Lee, Dayong Li. Experimental and numerical study on strain path and crystal orientation dependences of phase transformation behaviors of QP1180 steel. International Journal of Plasticity 160 (2023) 103499. 3. Kaijun Lu, Zhenye Liang, Tianxia Zou, Yongkai Wang, Dayong Li, Shichao Ding, Hua Xiao, Lei Shi, Yinghong Peng. On feasibility of roll-stamp forming variable-sectional metal channels. Int J Adv Manuf Technol (2022). https://doi.org/10.1007/s00170-022-10633-1. 4. Yang Liu, Kaijun Lu, Zhenye Liang, Dayong Li*, Tianxia Zou, Shichao Ding. Forming of metal channels with local features by chain-die forming. Journal of Materials Processing Technology, 2022, 304: 117558. 5. Dayong Li, Robert H. Wagoner, The Nature of Yielding and Anelasticity in Metals. Acta Materialia. 2021, 206: 116625. https://doi.org/10.1016/j.actamat.2021.116625 6. Guanghan Wu, Dayong Li⁎, Wei-Jen Lai, Yandong Shi, Hongtae Kang, Yinghong Peng, Xuming Su. Fatigue behaviors and mechanism-based life evaluation on SPR-bonded aluminum joint. International Journal of Fatigue 142 (2021) 105948. 7. Zihan Li, Guowei Zhou, Dayong Li*, Mukesh K.Jain, Yinghong Peng, Peidong Wu. Forming limits of magnesium alloy AZ31B sheet at elevated temperatures. International Journal of Plasticity, 2020, 135: 102822. https://doi.org/10.1016/j.ijplas.2020.102822 8. Guowei Zhou, Qingping Sun, Dayong Li, Zhaoxu Men, YinghongPeng, DanielleZeng, XumingSu. Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states. Polymer Testing, 2020, 90, 106657. https://doi.org/10.1016/j.polymertesting.2020.106657. 9. Guanghan Wu, Dayong Li*, Wei-Jen Lai， Qiuren Chen，Yandong Shi，Li Huang， Shiyao Huang, Hongtae Kang, Yinghong Peng, Xuming Su. Experimental and numerical evaluations on the effects of adhesive fillet, overlap length and unbonded area in adhesive‐bonded joints. Fatigue & Fracture of Engineering Materials & Structures. 2020, https://doi.org/10.1111/ffe.13294 10. Weiqin Tang, Guowei Zhou, Yichuan Shao, Dayong Li*, Yinghong Peng, Huamiao Wang. On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion. Materials Characterization, 2020, 162, 110189. 11. S.F. Chen, D.Y. Li, S.H. Zhang, H.N. Han, H.W. Lee, M.G. Lee. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach. International Journal of Plasticity, 2020,141, 102710. 12. Guowei Zhou, Qingping Sun, Joel Fenner, Dayong Li*, Danielle Zeng, Xuming Su, Yinghong Peng. Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading. International Journal of Impact Engineering, 2020, 140, 103539 13. Zhiheng Zhang, Zhenye Liang, Dayong Li*, Shichao Ding. Clamp forming of local features on sheet metals. Journal of Materials Processing Technology, 2020, 275, 116331. 14. Kai Li, Tianxia Zou, Dayong Li*, Yinghong Peng, Da Shu. On formation of abnormally large grains in annealing pre-strained aluminum alloy multi-port extrusion tubes. Metallurgical and Materials Transactions A, 2019, 50: 5734–5749. 15. Tao Tang, Guowei Zhou, ZihanLi, Dayong Li*, Liming Peng, Yinghong Peng, Peidong Wu, Huamiao Wang, Myoung-Gyu Lee. A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys. International Journal of Plasticity, 2019, 116(5): 159-191. 16. Yangguang Li, Zhenye Liang, Zhiheng Zhang, Tianxia Zou, Dayong Li*, Shichao Ding, Hua Xiao, Lei Shi. An Analytical Model for Rapid Prediction and Compensation of Springback for Chain-die Forming of an AHSS U-channel. International Journal of Mechanical Sciences, 2019, 159: 195-212. 17. Kai Li, Dayong Li, Tianxia Zou, Da Shu, Ding Tang, and Yinghong Peng. Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-019-04132-w. 18. Weiye Chen, Jinmao Jiang, Dayong Li*, Tianxia Zou, Yinghong Peng. Flower pattern and roll positioning design for the cage roll forming process of ERW pipes. Journal of Materials Processing Technology, 2019, 264(2): 295-312. 19. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Huamiao Wang, Peidong Wu. Misorientation Development in Continuous Dynamic Recrystallization of AZ31B Alloy Sheet and Polycrystal Plasticity Simulation. Materials Science and Engineering: A, 2018, 730 (7): 438-456. 20. Huamiao Wang, Peidong Wu, Srihari Kurukuri, Michael J. Worswick, Yinghong Peng, Ding Tang, Dayong Li*. Strain rate sensitivities of deformation mechanisms in magnesium alloys. International Journal of Plasticity, 2018, 107(8): 207-222 . 21. Yaguang Li, Yong Sun, Hua Xiao, Hyuk Jong Bong, Lei Shi, Shuhui Li, Dayong Li*, Shichao Ding*, R.H. Wagoner. A numerical study on chain-die forming of the AHSS U-channel and contrast with roll forming, International Journal of Mechanical Sciences 2018, 135: 279–293. 22. Tao Tang, Yichuan Shao, Dayong Li*, Liming Peng, Yinghong Peng, Shaorui Zhang, Peidong Wu. Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity, Journal of Alloys and Compounds, 2018, 730: 161-181. 23. Guanghan Wu, Dayong Li*, Xuming Su, Yinghong Peng, Yandong Shi, Li Huang, Shiyao Huang, Weiqin Tang. Experiment and Modeling on Fatigue of the DP780GI Spot Welded Joint, International Journal of Fatigue, 2017, 103(10): 73-85. 24. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Hatem S. Zurob, Peidong Wu. A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper. International Journal of Plasticity, 2017,91：48－76. 25. D.Y. Li, Z. Chen, L. Sun, J.W. Lee, R.H. Wagoner. An improved test for shear fracture. International Journal of Solids and Structures, 2016, 97-98: 29-42. 26. X.H. Fan, D. Tang, W.L. Fang, D.Y. Li, Y.H. Peng. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion. Materials Characterization, 2016, 118: 468-480. 27. Guowei Zhou, Mukesh K. Jain, Peidong Wu, Yichuan Shao, Dayong Li*, Yinghong Peng, Experiment and crystal plasticity analysis on plastic deformation of AZ31B mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve, International Journal of Plasticity, 2016, 79: 19-47. 28. Tianxia Zou, Dayong Li*, GuanghanWu, Yinghong Peng. Yield strength development from high strength steel plate to UOE pipe, Materials and Design, 2016, 89(1): 1107–1122. 29. Zhong Chen, Hyuk Jong Bong, Dayong Li, R.H. Wagoner. The elastic-plastic transition of metals. International Journal of Plasticity, 2016, 83(8): 178-201. 30. Yichuan Shao, Tao Tang, Dayong Li*, Guowei Zhou, Shaorui Zhang, Yinghong Peng. Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2016, 26(4): 1063–1072. 31. Yichuan Shao, Tao Tang, Dayong Li*, Weiqin Tang and Yinghong Peng. Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy, Modelling and Simulation in Materials Science and Engineering, 2015,23: 055011 (19pp) 32. Tianxia Zou, GuanghanWu, DayongLi*, QiangRen ,JiyuanXin, YinghongPeng. A numerical method for predicting O-forming gap in UOE pipe manufacturing, International Journal of Mechanical Sciences, 2015,98:39–58. 33. Qiang Ren, Tianxia Zou, Dayong Li*, Ding Tang, Yinghong Peng. Numerical study on the X80 UOE pipe forming process, Journal of Materials Processing Technology, 2015, 215 (1): 264-277. 34. Weiqin Tang, Shiyao Huang, Dayong Li*, Yinghong Peng. Mechanical anisotropy and deep drawing behaviors of AZ31 magnesium alloy sheets produced by unidirectional and cross rolling, Journal of Materials Processing Technology, 2015, 215 (1): 320-326. 35. Guowei Zhou, K. Ananthaeswara, G. Mitukiewicz, Dayong Li, R.K. Mishra, M.K. Jain, FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet, Journal of Materials Processing Technology, 2015, 218: 12–22. 36. X. H. Fan, M. Li, D. Y. Li, Y. C. Shao, S. R. Zhang, Y. H. Peng. Dynamic recrystallization and dynamic precipitation in AA6061 aluminium alloy during hot deformation, Materials Science and Technology, 2014, 30(11): 1263 – 1272. 37. Weiqin Tang, Dayong Li*, Shiyao Huang, Shaorui Zhang, Yinghong Peng. Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches. Computers & Structures, 2014, 143(9): 1-8. 38. Ding Tang, Qingqing Zhang, Dayong Li, Yinghong Peng. A physical simulation of longitudinal seam welding in micro channel tube extrusion. Journal of Materials Processing Technology, 2014, 214(11): 2777-2783. 39. Y. Shi, P. D. Wu, D. J. Lloyd and D. Y. Li . Effect of Rate Sensitivity on Necking Behavior of a Laminated Tube Under Dynamic Loading. Journal of Applied Mechanics (Transactions of the ASME). 2013, 81(5): 05010. 40. L. M. Li, D. Y. Li*, Y. H. Peng， The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method, Engineering with Computers. 2011, 27(3): 273-284. 41. LI L M., PENG Y. H., LI D. Y.*, A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis, Finite Elements in Analysis and Design, 2011, 47: 511-518. 42. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li , Influence of Extrusion parameters on grain size and texture distribution, Journal of Materials Processing Technology, 2011, 211: 1203–1209. 43. Ding Tang, Yinghong Peng, Dayong Li. Mechanical expansion of thick-walled micro-groove tube for high pressure ACR system. Journal of Pressure Vessel Technology (Transactions of the ASME). 2011, 132(2): 1202-1209. 44. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du. Optimisation to the tube-fin contact status of the tube expansion process. Journal of Materials Processing Technology. 2011, 211(4): 573-577. 45. Xiaohui FAN, Weiqin TANG,Shaorui ZHANG, Dayong LI, Yinghong PENG, Effects of dynamic recrystallization in extruded and compressed AZ31 magnesium alloy, Acta Metallurgica Sinica(English letters), 2010, 23(5) : 334-342. 46. Shaorui Zhang, Yinghong Peng, Weiqin Tang,Dayong Li, The polycrystalline plasticity due to slip and twinning, Acta Mech., 2010, 212:293–303. 47. Li Juan Hu, Ying Hong Peng, Da Yong Li, and Shao Rui Zhang, Influence of Dynamic Recrystallization on Tensile properties of AZ31 magnesium alloy sheet, Materials and Manufacturing Processes, 2010, 25: 880–887. 48. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du, A new approach in evaluation of thermal contact conductance of tube-fin, Applied Thermal Engineering, 2010, 30: 1991-1996. 49. Qingqing Zhang, Ding Tang, Dayong Li, Yinghong Peng, Numerical and experimental study on in-plane bending of microchannel aluminum flat tube, Journal of Materials Processing Technology, 2010, 210: 1876–1884. 50. Ding Tang, Yinhong Peng, Dayong Li. Numerical and experimental study on expansion forming of inner grooved tube. Journal of Materials Processing Technology. 2009, 209: 4668-4674. 51. Jinmao Jiang, Dayong Li, Yinhong Peng, JianXin Li. Research on strip deformation in the cage roll forming process of ERW round pipes. Journal of Materials Processing Technology. 2009, 209: 4850-4856. 52. Ding Tang, Yinhong Peng, Dayong Li*. Experimental and numerical study on expansion of thick-walled micro-groove tube. Journal of Mechanical Engineering Science. 2009, 223: 689-696. 53. Ding Tang, Dayong Li*, Yinhong Peng. Roles of surface booster system on bending of thin-walled copper tube. Journal of Materials Engineering and Performance. 2009, 18: 369–377. 54. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li*, Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method, Computational Material Sciences, 2009, 46: 393-399. 55. Dayong Li, Yinghong Peng, Shaorui Zhang, Numerical simulation of sheet metal stamping by using ODF data, International Journal of Mechanical Sciences. 2009, 59(1): 41-51. 56. Luo Yingbing, Li Dayong, Peng Yinghong, Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension, Transaction of Nonferrous Metal Society of China, 2006, 16: 1630-1633. 57. Hu L J, Zhang S R, Li D Y, Peng Y H. Numerical analysis of influence of micro-parameters on macro-micromechanical properties of fiber reinforced metal matrix composites, Journal of Materials Processing Technology, 2008, 201(1-3): 736-741. 58. Yinghong Peng, Ding Tang and Dayong Li*, Study on the influence of mandrel type on copper tube rotary draw bending. International Journal of Materials and Product Technology, 2008, 32(4): 406-422. 59. Yinghong Peng, Jinmao Jiang, Dayong Li*, Jianzeng Han, Jianxin Li. Simulation of cage roll forming process of ERW pipes. International Journal of Materials and Product Technology, 2008, 32(4): 388-405. 60. Dayong Li, Yingbing Luo, Yinghong Peng. The Numerical and Analytical Study on Stretch Flanging of V-Shaped Sheet Metal, Journal of Materials Processing Technology, 2007, 189:262-267. 61. Dayong Li, Yinghong Peng, Jilong Yin, Optimization of metal forming process via a hybrid intelligent optimization technique, Structural and Multidisciplinary Optimization, 2007, 34: 229-241. 62. QunFeng Chang, Dayong Li, Yinghong Peng, Xiaoqin Zeng. Experimental and numerical study of warm drawing of AZ31 magnesium alloy sheet. International Journal of Machine Tools & Manufacture. 2007, 47: 436–443. 63. Jilong Yin, Dayong Li, Yinghong Peng，Knowledge Acquisition from Metal Forming Simulation，The International Journal of Advanced Manufacturing Technology, 2006, 29(3-4): 279-286. 64. 苏旭明，郑鑫，李大永. 汽车设计的耐久性分析[M]. 机工工业出版社, 2016. 国际学术会议报告： 1) Dayong Li, Recent progress on Chain-die forming. the 6th International Conference on Advanced Steels, Invited speech, Jeju, Korea, 2018. 2) Dayong Li, A crystal plasticity study on the deformation of an AZ31 alloy sheet under elevated temperature, The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Keynote speech, Tokyo, Japan, 2018. 3) Dayong Li, A polycrystal plasticity based thermal-mechanical-DRX coupled modeling method, The 24th International Conference on Plasticity, Damage and Fracture, Keynote speech, Puerto Rico, 2018. 4) Dayong Li, Chain-die forming of AHSS, Materials Science & Technology 2017, Invited speech, Pittsburgh, USA, 2017. 5) Dayong Li, A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper, The 23th International Conference on Plasticity, Damage and Fracture, Keynote speech, Mexico, 2017. 6) 李大永，Formability Analysis of Aluminum and Magnesium Alloys Sheets by Using Crystal Plasticity Method，国际材联第十七届亚洲材料大会暨中国材料大会，邀请报告，中国青岛，2016. 7) 李大永，铝合金微通道管材挤压成形中的材料集成计算工程，“新材料国际发展趋势高层论坛”，邀请报告，中国南京，2016. 8) Dayong Li, Numerical simulation of X90 UOE pipe forming process. The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Australia, 2014. 9) Dayong Li, Study on extrusion of aluminum microchannel flat tubes, The 11th International Conference on Numerical Methods in Industrial Forming Processes, Invited speech. China, 2013. 10) Dayong Li, A virtual design system for the cage roll forming process of ERW pipes. 15th International Conference on Advances in Materials and Processing Technologies, Invited speech, Australia, 2012. 11) Dayong Li, Application of crystalline plasticity finite element method in simulation of plastic forming of AZ31 alloy, 7th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, Invited speech, China, 2012. 12) Dayong Li, Dieless bending of flat-tube heat exchangers, The 10th International Conference on Technology of Plasticity, Germany, 2011.

学术兼职

2019- 中国机械工程学会塑性工程分会理事 NUMIFORM、ICTP国际会议国际科学技术委员会委员 2018- 材料基因工程领域委员会通则标准化工作技术委员会委员 2021- 中国汽车工程学会房车与营地工程技术分会副主任委员

我收藏的导师 >

便捷的期刊搜索 >

免费课题组网站 >

推荐链接