近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Peng Linfa, Xu Zhutian, Mao Mengyun, Lai Xinmin, Fu Mingwang. Damage mechanisms of material in single-cone scratching. Journal of Manufacturing Science and Engineering – Transactions of the ASME, 2021, 143(6): 061013.
2. Zhang Rui, Xu Zhutian, Peng Linfa, Lai Xinmin, Fu Mingwang. Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming. International Journal of Machine Tools & Manufacture, 2021, 164: 103713.
3. Zhang Weixin, Gao Jie, Deng Yujun, Peng Linfa, Yi Peiyun, Lai Xinmin, Lin Zhongqin. Tunable superhydrophobicity from 3D hierarchically nano-wrinkled micro-pyramidal architectures. Advanced Functional Materials, 2021: 2101068.
4. Zhang Di, Peng Linfa, Yi Peiyun, Lai Xinmin. Electronic transport and corrosion mechanisms of graphite-like nanocrystalline carbon films used on metallic bipolar plates in proton-exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2021, 13(3): 3825-3835.
5. Peng Linfa, Wan Yue, Qiu Diankai, Yi Peiyun, Lai Xinmin. Dimensional tolerance analysis of proton exchange membrane fuel cells with metallic bipolar plates. Journal of Power Sources, 2021, 481: 228927.
6. Lei Sun, Xu Zhutian, Peng Linfa, Lai Xinmin. Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals. Materials Science & Engineering A, 2021, 822: 141630.
2020 年代表性论文
7. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation field. Assembly Automation, 2019, 39:226-242.
8. Huang Jihui, Xu Zhutian, Li Xianan, Peng Linfa, Lai Xinmin. An experimental study on a rapid micro imprinting process. Journal of Materials Processing Technology, 2020, 283: 116716.
9. Qiu Diankai, Peng Linfa, Tang Jiayu, Lai Xinmin. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels. Energy, 2020, 198: 117334.
10. Zhang Di, Peng Linfa, Li Xiaobo, Yi Peiyun, Lai Xinmin. Controlling the nucleation and growth orientation of nanocrystalline carbon films during plasma-assisted deposition: a reactive molecular dynamics/monte carlo study. Journal of the American Chemical Society, 2020,142:2617-27.
11. Xu Zhutian, Huang Jihui, Mao Mengyun, Peng Llinfa, Lai Xinmin. An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing. Journal of Materials Processing Technology, 2020, 285: 116790.
12. Peng Linfa, Shao Heng, Qiu Diankai, Yi Peiyun, Lai Xinmin. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2020, 453: 227836.
13. Liu Wenqing, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates. International Journal of Energy Research, 2020, 44:8622-34.
14. Xu Zhutian, Peng Linfa, Lai Xinmin. Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect. The International Journal of Advanced Manufacturing Technology, 2020, 109: 2055-2064.
15. Li Xiaobo, Hou Kun, Qiu Diankai, Yi Peiyun, Lai Xinmin. A first principles and experimental study on the influence of nitrogen doping on the performance of amorphous carbon films for proton exchange membrane fuel cells. Carbon, 2020, 167: 219-229.
2019年代表性论文
16. Wang Jin, Peng Linfa, Deng Yujun, Lai Xinmin, Fu Mingwang, Ni Jun. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, 122: 135-163.
17. Qiu Diankai, Peng Linfa, Lai Xinmin, Ni Meng, Werner Lehnert. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell, Renewable and Sustainable Energy Reviews, 2019, 113: 109289.
18. Shao Heng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells. Journal of Power Sources, 2019, 412: 717–724.
19. Xu Xun, Yu Haidong, Li Yunyong, Lai Xinmin. Compliant assembly deviation analysis of large-scale thin-walled structures in different clamping schemes via ANCF. Assembly Automation, 2019.
20. Yu Haidong, Xu Xun, Zheng Bin, Lai Xinmin. Welding-induced buckling prediction for large thin-walled cylindrical structures with non-uniform stress fields by friction stir welding. The International Journal of Advanced Manufacturing Technology, 2019, 103(9): 4635-4647.
21. Li Yunyong, Zhao Yong, Yu Haidong, Lai Xinmin. Modeling deviation propagation of compliant assembly considering form defects based on basic deviation fields. Assembly Automation, 2019, 39(1): 226-242.
22. Deng Yujun, Wang Jin, Yi Peiyun, Peng Linfa, Lai Xinmin, Lin Zhongqin. Numerical studies on size effect behaviors of glassy polymers based on strain gradient elastoviscoplastic model. Journal of Applied Mechanics, 2019, 86(2): 021001.
2018年代表性论文
23. Gan Tian, Yu Zhongqi, Zhao Yixi, Evsyukov SA, Lai Xinmin. Effects of backward path parameters on formability in conventional spinning of aluminum hemispherical parts. Transactions of Nonferrous Metals Society of China, 2018, 28: 328-339.
24. Yi Peiyun, Zhang Di, Peng Linfa, Lai Xinmin. Impact of film thickness on defects and the graphitization of nanothin carbon coatings used for metallic bipolar plates in proton exchange membrane fuel cells. ACS Applied Materials & Interfaces, 2018, 10(40): 34561-72.
25. Zhang Weixin, Yi Peiyun, Peng Linfa, Lai Xinmin. Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs. Energy, 2018, 162: 933-43.
26. Liang Peng, Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Ni Jun. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates. Energy Conversion and Management, 2018, 169: 334-44.
27. Qiu Diankai, Peng Linfa, Liang Peng, Yi Peiyun, Lai Xinmin, Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells. Energy, 2018, 165: 210-222.
28. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin, Lehnert W, Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments. Energy Conversion And Management, 2018,174: 814-823.
29. Yu Haidong, Zhao Chunzhang, Lai Xinmin. Compliant assembly variation analysis of scalloped segment plates with a new irregular quadrilateral plate element via ANCF. Journal of Manufacturing Science and Engineering, 2018, 140(9): 091006.
2017年代表性论文
30. Deng Yujun, Peng Linfa, Lai Xinmin Lai, Fu Mingwang, Lin Zhongqin. Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. International Journal of Plasticity, 2017, 89: 197-222.
31. Bi Feifei, Hou Kun, Yi Peiyun, Peng Linfa, Lai Xinmin. Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs. Applied Surface Science, 2017, 422: 921-931.
32. Jiang Tianhao, Peng Linfa, Yi Peiyun, Lai Xinmin. Investigation of deformation behavior of SS304 and pure copper subjected to electrically assisted forming process. Journal of Manufacturing Science and Engineering, 2017, 139(1): 011004.
33. Qiu Diankai, Peng Linfa, Yi Peiyun, Lai Xinmin. A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper. International Journal of Mechanical Sciences, 2017, 124: 37-47.
34. Wang Jin, Yi Peiyun, Deng Yujun, Peng Linfa, Lai Xinmin, Ni Jun. Recovery behavior of thermoplastic polymers in micro hot embossing process. Journal of Materials Processing Technology, 2017, 243: 205-216.
35. Yi Peiyun, Zhang Chengpeng, Peng Linfa, Lai Xinmin. Flexible silver-mesh electrodes with moth-eye nanostructures for transmittance enhancement by double-sided roll-to-roll nanoimprint lithography. RSC Advances, 2017, 7(77): 48835-48840.
36. Zhang Chengpeng, Yi Peiyun, Peng Linfa, Lai Xinmin, Chen Jie, Huang Meizhen, Ni Jun. Continuous fabrication of nanostructure arrays for flexible surface enhanced Raman scattering substrate. Scientific Reports, 2017, 7: 39814.
37. Zhang Chengpeng, Zhu Yuwen, Yi Peiyun, Peng Linfa, Lai Xinmin. Fabrication of flexible silver nanowire conductive films and transmittance improvement based on moth-eye nanostructure array. Journal of Micromechanics and Microengineering, 2017, 27(7): 075010.
38. Bi Feifei, Li Xiaobo, Yi Peiyun, Hou Kun, Peng Linfa, Lai Xinmin. Characteristics of amorphous carbon films to resist high potential impact in PEMFCs bipolar plates for automotive application. International Journal of Hydrogen Energy, 2017, 42(20): 14279-14289.
39. Yu Haidong, Zheng Bin, Lai Xinmin. A modeling study of welding stress induced by friction stir welding. Journal of Materials Processing Technology, 2017, 254(4): 213-220.
40. Peng Linfa, Xu Zhutian, Fu Mingwang, Lai Xinmin. Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria. International Journal of Mechanical Sciences, 2017, 120: 190-203.
2016年代表性论文
41. Peng Linfa, Mao Mengyun, Fu Mingwang, Lai Xinmin. Effect of grain size on the adhesive and ploughing friction behaviors of polycrystalline metals in forming process. International Journal of Mechanical Sciences, 2016, 117: 197-209.
42. Bi Feifei, Peng Linfa, Yi Peiyun, Lai Xinmin. Multilayered Zr–C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells. Journal of Power Sources. 2016, 314: 58-65.
43. Peng Linfa, Wu Hao, Shu Yunyi, Yi Peiyun, Deng Yujun, Lai Xinmin. Roll-to-roll hot embossing system with shape preserving mechanism for the large-area fabrication of microstructures. Review of Scientific Instruments, 2016, 87(10): 105120.
44. Wu Hao, Yi Peiyun, Peng Linfa, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays I. experiments. Journal of Vacuum Science & Technology, 2016, 34(2): 021201.
45. Peng Linfa, Wu Hao, Yi Peiyun, Lai Xinmin. Study on bubble defects in roll-to-roll UV imprinting process for micropyramid arrays II: Numerical study. Journal of Vacuum Science & Technology, 2016, 34(5): 051203.
46. Mao Mengyun, Peng Linfa, Yi Peiyun, Lai Xinmin. Modeling of the friction behavior in metal forming process considering material hardening and junction growth. Journal of Tribology, 2016, 138(1): 012202.
京公网安备 11010802027423号