近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
2023:
23-1、Liu Xiao#, He Ji#*, Huang Shiyao*. Mechanistically informed artificial neural network model for discovering anisotropic path-dependent plasticity of metals. Materials & Design, 2023, 111697.
23-2、Ji He*, Cong Guo*, Wenkai Li. Understanding the helicoidal damage behavior of bio-inspired laminates by conducting multiscale concurrent simulation and experimental analysis. Composite Structures, 2023, 314(15):116972.
23-3、He Ji, Yishuang Feng. Determining Localized Necking in Polycrystalline Sheet Metals Using the Bifurcation Phenomenon in Strain Evolution, Crystals, 2023, 13, no. 2: 272.
2022:
22-1、Guofeng Han, Ji He*, Shuhui Li, Simple shear deformation of sheet metals: finite strain perturbation analysis and high-resolution quasi-in-situ strain measurement, International Journal of Plasticity, 2022, 150:103194
22-2、He, J.*, Han, G., Feng, Y., Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction, Thin-Walled Structures, 2022, 173, 108977
22-3、Guo Cong, He Ji*. Multi-scale concurrent analysis for bio-inspired helicoidal CFRP laminates and experimental investigation, Composite Structures, 2022, 296: 115886.
2021:
21-1、冯怡爽，何霁*, 韩国丰，李淑慧, 林忠钦. 金属板材塑性本构关系的深度学习预测方法及建模[J]. Deep learning predicting method and modeling of plastic constitutive relation of sheet metal, Feng, Y.-S., He, J.*, Han, G.-F., Li, S.-H., Lin, Z.-Q., Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2021, 28(6), pp. 34–46
21-2、He, J.*, Han, G., Guo, C., Non-associated anisotropic plasticity of metal sheets based on the distortional concept, Thin-Walled Structures, 2021, 161, 107523.
21-3、Effects of Prestrain and Inner Stress on the Susceptibility of Hot Stamped Boron Steel to Hydrogen Embrittlement，Zhang, B., Li, S.*, He, J.，Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2021, 52(6), pp. 2314–2330
21-4、SHEET METAL FORGING PROCESS FOR THIN-WALLED STRUCTURES WITH CROSSED RIBS: PROCESS DESIGN, SIMULATION AND A FORMING EXPERIMENT，Feng, B., He, J.*, Li, S., Gu, B., Lin, Z.，METAL 2021 - 30th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings, 2021, pp. 217–222
2020:
20-1、Gu B, He Ji*, Li S, Lin Z. Anisotropic fracture modeling of sheet metals: from in-plane to out-of-plane. International Journal of Solids and Structures, 2020,182-183,112-140.
20-2、Cong Guo, Ji He*, Youhuang Su, Shuhui Li, Thermo-stamping co-curing process for CFRP/steel hybrid sheets and its interface strength improvement, Composite Structures, 2020, 241,112108.
20-3、Research on phase transformation and mechanical behavior of QP980 steel | QP980钢相变及力学行为研究，Feng, Y.-S., Han, G.-F., Niu, C., ...Chen, X.-P., Li, S.-H.，Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2020, 27(11), pp. 137–143
2019:
19-1、He Ji*, Guofeng Han, Li Shuhui*, Danqing Zou, To correlate the phase transformation and mechanical behavior of QP steel sheets, International Journal of Mechanical Sciences, 2019, 152: 198-210
19-2、 顾彬, 何霁, 李淑慧, 林忠钦*. 金属板料各向异性断裂模型及断裂实验研究进展[J]. 塑性工程学报, 2018, 卷（期）. GU Bin, HE Ji, LI Shu-hui, LIN Zhong-qin. Research progress on anisotropic fracture models and fracture tests for sheet metals. Journal of Plasticity Engineering, 2019.
19-3、苏友煌，王军辉，冯怡爽，何霁*, 李淑慧. 汽车内覆盖件无油冲压的数值模拟及工艺优化.塑性工程学报，2018.SU You-huang，WANG Jun-hui，FENG Yi-shuang，HE Ji, LI Shu-hui. Numerical Simulation and Process Optimization of Dry Stamping Process for Automotive Interior Component. Journal of Plasticity Engineering，2019.
19-4、He, J., Li, S.*, Dong, L., Experiments and FE simulation of edge cracking considering prehardening after blanking process, International Journal of Material Forming, 2019, https://doi.org/10.1007/s12289-019-01491-6
19-5、Ji He*, Yongfeng Li, Bin Gu, Shuhui Li*, Effects of reverse loading on forming limit predictions with distortional anisotropic hardening under associated and non-associated flow rules, International Journal of Mechanical Sciences, 2019, 156, 446-461.
19-6、Yongfeng Li, Shuhui Li*, Ji He, Yuan Chen, Lan Yue, Identification methods on blank-die interfacial heat transfer coefficient in press hardening, Applied Thermal Engineering, 2019,152, 865-877
2018:
18-1、Li Shuhui*, He Ji*, Gu Bin, Zeng Danielle, Xia Z. Cedric, Zhao Yixi, Lin Zhongqin, Anisotropic fracture of advanced high strength steel sheets: Experiment and theory, International Journal of Plasticity, 2018, 103: 95-118
18-2、Zou Danqing, Li Shuhui*, He Ji, Gu Bin, Li Yongfeng, The Deformation Induced Martensitic Transformation and Mechanical Behavior of Quenching and Partitioning steels under Complex Loading Process, Materials Science & Engineering A, 2018, 715: 243-256.
18-3、He Ji, Gu B, Li Y, Li S*. Forming Limits Under Stretch-Bending Through Distortionless and Distortional Anisotropic Hardening. ASME Journal of Manufacturing Science and Engineering 2018;140(12):121013-121013-14.
18-4、He Ji, Shuhui Li*, Shanshuai Wang, Deformation behavior of sandwich hemispherical structure under axial compression at low temperature, Composite Structures, 2018, 203: 267-277
18-5、He Ji, Wang, Z., Li, S. * et al. Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation, International Journal of Material Forming, 2019, 12(4): 575–586
2017:
11、Zou Danqing, Li Shuhui*, He Ji, Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels, Materials Science & Engineering A, 2017, 680:54-63.
12、Gu B, He J*, Li S, et al. Cyclic Sheet Metal Test Comparison and Parameter Calibration for Springback Prediction of Dual-Phase Steel Sheets[J]. ASME Journal of Manufacturing Science and Engineering, 2017, 139(9).
13、Dong L., Li S., He Ji, Ductile fracture initiation of anisotropic metal sheets. Journal of Materials Engineering & Performance, 2017, 26(2), 1-14.
to 2016:
1、He J., Xia Z.C.*, Zhu X.H., Zeng D., Li S.H., Sheet Metal Forming Limits Under Stretch-Bending With Anisotropic Hardening, International Journal of Mechanical Sciences, 2013, 75：244-256
2、He J., Xia Z.C.*, Li S.H., Zeng D., M-K Analysis of Forming Limit Diagram Under Stretch-Bending, ASME Journal of Manufacturing Science and Engineering, 2013, 135（04）：041019-1-041019-10
3、He J., Xia Z.C.*, Zeng D., Li S.H., Forming Limits of a Sheet Metal After Continuous-Bending-Under-Tension Loading, ASME Journal of Engineering Materials and Technology，2013，135（03）：031009-1-031009-8
4、He J., Zeng D., Zhu X.H., Xia Z.C.*, Li S.H., Effect of Nonlinear Strain Paths on Forming Limits under Isotropic and Anisotropic Hardening, International Journal of Solids and Structures, 2014, 51：402-415
5、Li S.H.*, He J., Xia Z.C., Zeng D., Hou B., Bifurcation Analysis of Forming Limits for An Orthotropic Sheet Metal, ASME Journal of Manufacturing Science and Engineering, 2014, 136（05）：051005-1-051005-10
6、Li S.H., He J.*, Zhao Y., Wang S., Dong L., Cui R., Theoretical Failure Investigation for Sheet Metals under Hybrid Stretch-Bending Loadings, International Journal of Mechanical Sciences, 2015, 104：75-90
7、Wang S., Li S.H.*, He J., Zhao Y.X., Asymmetric post-buckling behavior of hemispherical shell structure under axial compression, ASME Journal of Engineering Materials and Technology, 2015, 138(1):1154.
8、Li S, Zou D, Xia C, et al. Effect of Strain Rate on Deformation-Induced Martensitic Transformation of Quenching and Partitioning Steels[J]. Steel Research International, 2015, 87(10):1302-1311.
9、Dong L., Li S., He J., et al., Investigation on shearing and local formability of hot-rolled high strength plates. ASME Journal of Manufacturing Science & Engineering,2016.
10、Wang Shanshuai, Li Shuhui*, He Ji, Buckling Behavior of Sandwich Hemispherical Structure Considering Deformation Modes under Axial Compression, Composite Structures, 2016, 163:312-324.
Conference paper:
• He J., Xia Z.C.*, Zeng D., Li S.H., M-K Analysis of Forming Limit Diagram Under Stretch Bending, ASME 2012 International Manufacturing Science and Engineering Conference, 2012.6.4-2012.6.8
• Wang, Z., Li, S., Dong, L., He, J., A grain structure model based on voronoi polygon of non- oriented electrical steel in blanking process, Numisheet 2016 conference, 734(3).
• Zou, D., Li, S., He, J., Cui, R., Failure investigation for QP steel sheets under uniaxial and equal-biaxial tension conditions, Numisheet 2016 conference, 734(3).
• Gu Bin , He Ji*, Li S.H. , Zhao Y.X., Lin Z.Q., A new specimen for out-of-plane shear strength of advanced high strength steel sheets. Journal of Physics Conference Series, 2017, 896(1), 012024. (IDDRG2017)
• Li Yongfeng, He Ji, Gu Bin, Li Shuhui, Identification of advanced constitutive model parameters through global optimization approach for DP780 steel sheet, Procedia Engineering, Volume 207, 2017, Pages 125-130. (ICTP2017)
京公网安备 11010802027423号