近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] Yandong Hu, Yifan Zhao, Min Zhao*, Miaolin Feng*. Three phases fluid-structure interactive simulations of the deepsea ceramic sphere's failure and underwater implosion, Ocean Engineering, 245, 110494, 2022, https://doi.org/10.1016/j.oceaneng.2021.110494
[2] Shengxia Sun, Fenghua Chen, Min Zhao*. Numerical simulation and analysis of the underwater implosion of spherical hollow ceramic pressure hulls in 11000m depth, Journal of Ocean Engineering and Science, JOES_297, 2022, https://doi.org/10.1016/j.joes.2022.01.002
[3] 詹可, 蒋垣腾, 赵敏*. 设计相关动载荷作用下的水下耐压结构拓扑优化, 海洋工程, 2022, 已录用
[4] Yongmei Zhu, Wei Guan, Hao Wang, Min Zhao, Jian Zhang. Buckling of Spherical Shells with Pitting Corrosion under External Pressure, Ships and Offshore Structures, 2021,DOI 10.1080/17445302.2021.2000266
[5] Jianyu Liu, Min Zhao, Lei Qiao. Adaptive barrier Lyapunov function-based obstacle avoidance control for an autonomous underwater vehicle with multiple static and moving obstacles, Ocean Engineering, 2021, DOI: 10.1016/j.oceaneng.2021.110303
[6] Lei Qiao,Min Zhao, ChaoWu,Tong Ge, Rui Fan,Weidong Zhang. Adaptive PID control of robotic manipulators without equality/inequality constraints on control gains, International Journal of Robust and Nonlinear Control, 2021, DOI: 10.1002/rnc.5849
[7] Yunzhi Huang, Min Zhao*, Miaolin Feng*, Electric–elastic analysis of multilayered two-dimensional decagonal quasicrystal circular plates with simply supported or clamped boundary conditions, Mathematics and Mechanics of Solids, 2021, https://doi.org/10.1177/1081286520981618
[8] Yunzhi Huang, Jian Chen, Min Zhao*, Miaolin Feng*, Electromechanical coupling characteristics of double-layer piezoelectric quasicrystal actuators, International Journal of Mechanical Sciences, 196(2021)106293, https://doi.org/10.1016/j.ijmecsci.2021.106293
[9] Yunzhi Huang, Jian Chen, Min Zhao*, Miaolin Feng*, Responses of multilayered two-dimensional decagonal quasicrystal circular nanoplates with initial stresses and nanoscale interactions, European Journal of Mechanics / A Solids, 87(2021)104216, https://doi.org/10.1016/j.euromechsol.2021.104216
[10] Yuming Qi, Min Zhao*, Miaolin Feng*, Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression, Journal of Alloys and Compounds, 2021(851), https://doi.org/10.1016/j.jallcom.2020.156923
[11] 陈锋华, 赵敏*.万米级深海耐压结构水下内爆的流场数值模拟, 海洋工程, 2021, 已录用.
[12] 蒋垣腾, 赵敏*. 水下耐压结构拓扑优化设计相关载荷径向基函数参数化水平集方法边界搜索方法, 船舶力学，2020，已录用.
[13] 张晓龙, 冯淼林, 赵敏*, 张培志, 何成贵, 祁海, 韩伟月, 郭方全. 氮化硅陶瓷空心浮力球在内爆临界状态下的失效分析, 海洋工程, 2020, 38(6):70-76
[14] Yuanteng Jiang, Min Zhao*, Topology optimization under design-dependent loads with the parameterized level-set method based on radial-basis functions, Computer Methods in Applied Mechanics and Engineering, 2020(369), https://doi.org/10.1016/j.cma.2020.113235
[15] Bin Zhou, Min Zhao*, Numerical Simulation of Thruster-thruster Interaction for ROV with Vector Layout Propulsion System, Ocean Engineering, 2020(210), https://doi.org/10.1016/j.oceaneng.2020.107542
[16] 万德成, 缪爱琴, 赵敏. 基于水动力性能优化的船型设计研究进展, 水动力学研究与进展，2019，34(6): 693-712.
[17] Xiaolong Zhang, Miaolin Feng, Min Zhao*, Peizhi Zhang, Chenggui He, Hai Qi, Weiyue Han, Fangquan Guo. Failure of silicon nitride ceramic flotation spheres at critical state of implosion, Applied Ocean Research, 2020(97).
[18] Aiqin Miao, Min Zhao, Decheng Wan, CFD-based Multi-Objective Optimisation of S60 Catamaran Considering Demihull Shape and Separation, Applied Ocean Research, 2020(97), 102071, https://doi.org/10.1016/j.apor.2020.102071
[19] Yan Meng, Xuesong Xu, Min Zhao. Dynamics calculation of complex deep-sea cable system based on hybrid optimization algorithm, Ocean Engineering, 200(15), 2020. https://doi.org/10.1016/j.oceaneng.2020.107041
[20] Min Zhao, Qingqing Yuan, Tao Wang, Tong Ge, and Weicheng Cui. Multidisciplinary Design Optimization of a Heavier-Than-Water Underwater Vehicle using a Semi-Empirical Model. International Journal of Offshore and Polar Engineering, 2019, 29(4):474-484.
[21] 袁庆晴，赵敏，葛彤，汪淳,基于欧拉模型的泥沙冲刷数值模拟, 哈尔滨工程大学报, 2019，40(1):47-53.
[22] Xiang Li, Min Zhao*, and Tong Ge. Nonlinear Observer for Remotely Operated Vehicle with Cable Effect in Ocean Current. Applied Sciences, 2018, 8(6), 867; https://doi.org/10.3390/app8060867
[23] Tao Wang, Jianqin Wang, Chao Wu, Min Zhao, Tong Ge. Disturbance-Rejection Control for the Hover and Transition Modes of a Negative-Buoyancy Quad Tilt-Rotor Autonomous Underwater Vehicle. Applied Sciences, 2018, 8(12), 2459; https://doi.org/10.3390/app8122459
[24] Xiaoyi Liu, Jianwei Wu, Min Zhao*, Decheng Wan. Hull Form Multi-objective Optimization for a Container Ship with Neumann-Michell Theory and Approximation Model. International Journal of Offshore and Polar Engineering, 2017, 27(4): 423-432.
[25] Qingqing Yuan, Min Zhao, Chun Wang, Tong Ge. The numerical study of 2D sand scour with the modified Eulerian model based on incipient motion theory, Marine Georesources & Geotechnology, 2017, 36(10).
[26] Shusen Zhang, Tong Ge, Min Zhao,and Chun Wang, The prediction of traveling jet trenching in stiff clay based on the erosion failure mechanism, Marine Georesources & Geotechnology, 2017, 35(7):939-945.
[27] Xiang Li, Jifeng Cui, Min Zhao*, and Tong Ge. Dynamic analysis of an underwater suspension system in ocean currents with method of averaging. Indian Journal of Geo Marine Sciences, 2017, 46(11):2220-2227.
[28] Yang Dai, Miaolin Feng, Min Zhao*. Topology optimization of laminated composite structures with design-dependent loads. Composite Structures, 2017, 167: 251-261.
[29] Jianwei Wu, Xiaoyi Liu, Min Zhao*, Decheng Wan. Neumann-Michell theory-based multi-objective optimization of hull form for a naval surface combatant. Applied Ocean Research, 2017, 63:129-141.
[30] Xiaoyi Liu, Qingqing Yuan, Min Zhao*, Weicheng Cui, Tong Ge. Multiple objective multidisciplinary design optimization of heavier-than-water underwater vehicle using CFD and approximation model, Journal of Marine Science and Technology (Japan), 2017, 22(1):135-148.
[31] 张晓龙, 冯淼林, 赵敏. 基于复合材料的水下耐压结构拓扑优化探究, 舰船科学技术, 2017, 39(10): 14-21.
[32] Cunfu Wang, Min Zhao*, Tong Ge. Structural topology optimization with design-dependent pressure loads. Structural and Multidisciplinary Optimization, 2016, 53: 1005-1018.
[33] Shusen Zhang, Min Zhao*, Tong Ge, and Chun Wang, Experimental Research on Trenching in Stiff Clay by Submerged Vertical Traveling Jets, Journal of Coastal Research, 2016, 32(2):365-373.
[34] Min Zhao*, Weicheng Cui, Xiang Li, Multidisciplinary Design Optimization of a Human Occupied Vehicle based on Bi-Level Integrated System Collaborative Optimization, China Ocean Engineering, 2014, 29(4):599-610.
[35] Min Zhao*, Weicheng Cui. On the Development of Bi-Level Integrated System Collaborative Optimization. Structural and Multidisciplinary Optimization,2011,43(1): 73–84.
[36] Qingqing Yuan, Min Zhao, Tong Ge, and Ammarah Raees. The Scour Prediction of Non-contact Trencher with Numerical Method. Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014) AIP Conf. Proc. 1648, 650009-1–650009-5.
[37] Xiang Li, Min Zhao*, Faming Zhao, Qingqing Yuan,Tong Ge, Study on hydrodynamic performance of Heavier-than-water AUV with overlapping grid method, Ocean Systems Engineering, 2014,4(1): 1-19.
[38] Xiang Li, Min Zhao*, Faming Zhao, Qingqing Yuan,Tong Ge, Study on hydrodynamic performance of Heavier-than-water AUV by overlapping grid techniques, Proceedings of the Eighth International Workshop on Ship Hydrodynamics, September 23-25, 2013, Seoul, Korea.
[39] 李翔，赵敏*，赵发明，袁庆晴，葛彤，基于重叠网格的重水潜器粘流数值模拟，船舶力学，2015,19(1-2):16-27.
[40] 王存福，赵敏*，葛彤，考虑失稳模式的环肋圆柱壳结构优化设计，上海交通大学学报，2014，48(1):56-63.
[41] 王喆，袁庆晴，马洪新，王磊，魏国涛，刘坤，赵敏*, 射流式挖沟机沟内流场数值计算与分析, 哈尔滨工程大学报, 2015，36(3):292-296.
[42] 颜翚，葛彤，刘建民，赵敏，重载深潜推进器性能分析及设计，船舶力学，2012，16(1-2):52-57.
[43] 颜翚，葛彤，赵敏，陈先，刘建民，全海深环境下高强度玻璃微珠复合浮力材料性能研究，上海交通大学学报, 2011,45 (9):1332-1335.
[44] 王喆，马洪新，李翔，王艳涛，李果，朱恒康，赵敏*，新型喷冲式挖沟机总体设计与结构安全性评估, 哈尔滨工程大学报, 2015，36(5):29-34.
[45] 王存福，赵敏*，葛彤，水下耐压结构拓扑优化设计方法探究，工程力学，2015,32(1):247-256.
[46] Chao Wu, Xuyang Wang, Guangjiao Zhuang, Min Zhao, Tong Ge. Motion of an underwater self-reconfigurable robot with tree-like configurations. Journal of Shanghai Jiaotong University (Science), 2013,18(5):598-605.
[47] Xiang Li, Tao Wang, Min Zhao*, Tong Ge. Lateral dynamic analysis and motion control of a jet trencher in ocean currents. Journal of Harbin Institute of Technology (New Series), 2017, 24 (1) :26-31.
[48] 戴扬，冯淼林，赵敏，基于复合材料的水下耐压结构拓扑优化探究，舰船科学技术，2017，39(10): 14-21.
[49] 王冠达，葛 彤，赵 敏，邓春楠，ROV 近底行走装置水平面动力学建模及稳定性分析，船舶工程，2015，37(1)：95-99.
[50] 马洪新，张树森，王艳涛，王鑫，李海鲸，刘淑艳，赵敏，下桩基清除方法研究,2014,51(6):57-60.
[51] 张树森，赵敏，海底管线埋设沟槽边坡稳定性分析，港工技术，2014，51(5):29-32.
[52] 袁庆晴，程惠莹，赵敏*，葛彤，基于目标层解分析方法的重水潜器多学科设计优化，中国科技论文，2014，9(11):1209-1215.
[53] 马洪新，李翔，王磊，王亮，胡振国，谷万囤，赵敏，挖沟机抽吸扬泥系统设计与研究，中国造船（增刊），2014,55(1):362-369.
[54] 颜翚，葛彤，王彪，刘建民，赵敏, 基于iSIGHT重于水的无人自治潜水器概念设计及优化方法，海洋工程, 2013，31(3):77-83.
[55] 刘帅，葛彤，赵敏，基于源项法的潜艇旋臂试验模拟，大连海事大学学报, 2011, 37(2):1-4.
[56] Min Zhao, Weicheng Cui, System synthesis model for a HOV in conceptual design, Journal of Ship Mechanics, 2009, 13(3):426-443.
[57] 赵敏，崔维成，BLISCO方法在载人潜水器设计中的应用，船舶力学, 2009, 13(2):259-268.
[58] Zhao Min, Cao An-xi, Gou Peng, Cui Wei-cheng. Application of Efficient Global Optimization in Ship Mechanics. Journal of Ship Mechanics, 2008, 12(3):473-482.
[59] 赵敏, 操安喜, 崔维成. 多学科设计优化方法的比较. 中国造船, 2008, 49(3):68-78.
[60] Zhao Min, Cui Wei-cheng. Application of optimal latin hypercube and radial basis function network to collaborative optimization. Journal of Marine Science and Application, 2007, 6(3):24-32.
京公网安备 11010802027423号