近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1] Yang J., Zhao C., Zhang Y., Wang X.E.* Wang Y., Xie D., (2023) Constitutive models for temperature-, strain rate- and time-dependent behaviors of ionomers in laminated glass. Journal of Materials Science, https://doi.org/10.1007/s10853-023-08222-y.
[2] Wang, X. E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J., Hou, X., (2023) Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model. Theoretical and applied fracture mechanics, 124, 103760.
[3] Wang, X.E., Pang, K., Huang, X., Yang, J., Ye, J., Hou, X. (2023) Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness. Engineering Fracture mechanics, 277, 108954.
[4] Wang, X. E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J., Hou, X., (2022) Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming. International Journal of Adhesion and Adhesives, 118, 103230.
[5] Wang, X.E., Kanani A., Pang K., Yang J., Ye J., Hou X., (2022) A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives. Thin-Walled Structures, 180, 109985.
[6] Yang J., Wang Y., Wang, X.E.*, Hou X., Zhao C., (2022). Local bridging effect of fractured laminated glass with novel hybrid interlayers under weathering actions. Construction and Building Materials. 314:125595.
[7] Wang, X.E., Huang, X.H.*, Yang, J., (2021). Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact. International Journal of Mechanical Science. 206: 106613.
[8] Huang, X.H., Wang, X.E.*, Yang, J., Pan, Z., Wang, F. (2021). Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage. Thin-Walled Structures. 167: 108137.
[9] Wang, X.E.*, Yang, J., Huang, X., Wang, F. (2021). Voronoi-FDEM concept for modelling post-fracture response of progressively damaged structural glass. Engineering with Computers. doi:10.1007/s00366-021-01318-6
[10] Pan, Z., Yang, J., Wang, X.E.*, Wang, F., Azim, I. (2021). Image-based surface scratch detection on architectural glass panels using deep learning approach. Construction and Building Materials. 282:122717.
[11] Wang, X.E., Meng, Y., Yang, J., Huang, X., Wang, F., Xu, H. (2021). Optimal kernel extreme learning machine model for predicting the fracture state and impact response of laminated glass panels. Thin-Walled Structures. 162:107541.
[12] Wang, X.E., Yang, J., Chong, W.T., Qiao P., Peng, S., Huang, X. (2020). Post-fracture performance of laminated glass panels under consecutive hard body impacts. Composite Structures. 254:112777.
[13] Sadeghian, M.A., Yang, J., Wang, X.E.*, Wang, F. (2021). Novel adaptive tuned viscous inertance damper (ATVID) with adjustable inertance and damping for structural vibration control. Structures, 29:814-822.
[14] Wang, X.E., Yang, J., Pan, Z., Zhu, Y. (2020). Exploratory investigation into the post-fracture model of laminated tempered glass using combined Voronoi-FDEM approach. International Journal of Mechanical Sciences. 105989.
[15] Wang, X. E., Yang, J., Liu, Q., & Zhao, C. (2018). Experimental investigations into SGP laminated glass under low velocity impact. International Journal of Impact Engineering, 122, 91-108.
[16] Wang, X. E., Yang, J., Wang, F., Liu, Q. F., & Xu, H. (2018). Simulating the impact damage of laminated glass considering mixed mode delamination using FEM/DEM. Composite Structures, 202, 1239-1252.
[17] Wang, X. E., Yang, J., Liu, Q. F., Zhang, Y. M., & Zhao, C. (2017). A comparative study of numerical modelling techniques for the fracture of brittle materials with specific reference to glass. Engineering Structures, 152, 493-505.
[18] 王义戈,章一萍,杨健,刘强,王星尔*. 考虑碎片膨胀效应的物理钢化夹层玻璃开裂后变形分析模型[J].应用力学学报, 2022.
[19] 朱禹翰, 杨健, 王星尔*, 张凯, 王义戈. 热处理玻璃裂纹形态试验及维诺形态表征方法研究[J].硅酸盐学报, 2022,50(02):482-491. (封面论文)
[20] 王星尔, 杨健, 王翰坤. 夹层热钢化玻璃裂纹形态表征及开裂后力学行为[J]. 硅酸盐学报, 2019(8):1039-1046.
合作论文
[1] Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E., Ye, J. (2023). Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method. Engineering Structures, 277, 115428.
[2] Wang, F., Shah, S., Wang, X., Wang, X. E., Zhang, W. X., Pang, B., & Yang, J. (2022). Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse. KSCE Journal of Civil Engineering, 26(4), 1782-1792.
[3] Liu, Q. F., Hu, Z., Wang, X. E., Zhao, H., Qian, K., Li, L. J., & Meng, Z. (2022). Numerical study on cracking and its effect on chloride transport in concrete subjected to external load. Construction and Building Materials, 325, 126797.
[4] Zhao, C., Yang, J., Wang, X.E., Ren, M., Azim, I. (2021). Investigation into short term behaviors of embedded laminated glass connections with various configurations. Construction and Building Materials. 297:123687.
[5] Zhang H, Wang F, Yang J*, Wang X.E. (2021). Evaluation on the behaviour of screwed CFS joints subjected to combined loading. Journal of Constructional Steel Research. 2021; 180:106582.
[6] Wang, F., Yang, J., Wang, X.E., Azim I. (2021). Study on progressive collapse behaviour of steel-framed substructures with sheathed CFS stud infill walls. Journal of Building Engineering. 102720.
[7] Meng, Y., Wang, X.E., Yang, J., Xu, H., Zhang, J. (2021). Research on machine learning based model for predicting the impact status of laminated glass. Journal of Inorganic Materials. 36(01):61-68.
[8] Huang, X., Yang, J., Bai, L., Wang, X.E. (2020). Theoretical solutions for auxetic laminated beam subjected to pulse load. Structures. 28:57-68.
[9] Huang, X., Yang, J., Wang, X.E., Azim, I. (2020). Combined analytical and numerical approach for auxetic FG-CNTRC plate subjected to a sudden load. Engineering with Computers. 10.1007/s00366-020-01106-8.
[10] Huang, X.H., Yang, J., Azim, I., Wang X.E., Ren, X. (2020). Geometric nonlinear analysis of auxetic hybrid laminated beams containing CNT reinforced composite materials. Materials. 13, 3718.
[11] Huang, X.H., Yang, J., Azim, I., Ren, X. Wang X.E. (2020). Characterization of static and dynamic response of auxetic hybrid FRC/CNTRC laminated plates. Nanotechnology Reviews. 9(1): 1625-1642. doi:10.1515/ntrev-2020-0106
[12] Hu, Y., Yang, J., Baniotopoulos, C., Wang, X.E., Deng, X. (2020). Dynamic analysis of offshore steel wind turbine towers subjected to wind, wave and current loading during construction. Ocean Engineering, 216,108084.
[13] Zhao, C., Yang, J., Wang, X. E., & Azim, I. (2019). Experimental investigation into the post-breakage performance of pre-cracked laminated glass plates. Construction and Building Materials, 224, 996-1006.
[14] Zhang, Y. M., Wang, X. E., Yang, J. (2018). Experimental Study of Multiple Layered SGP Laminated Glass under Hard Body Impact. Journal of Inorganic Materials, 33(10), 1110-1118.
[15] 张强, 杨健, 王星尔, 徐涵, 孟嫣然. 基于结构响应向量和支持向量机的框支承玻璃幕墙连接松弛状态智能识别[J].硅酸盐学报,2020,48(10):1682-1688.
[16] 赵宸君,杨 健,王星尔,黄小坤,刘 强. 基于国内外标准的结构用玻璃构件承载性能设计对比[J].建筑结构学报, 2022, 43(3):212-222.
[17] 徐涵, 杨健, 王星尔, 等. 反向传播神经网络在隐框玻璃幕墙脱胶损伤识别中的应用[J]. 硅酸盐学报, 2019(8):1073-1079.
[18] 刘炘炜,杨健,王星尔,刘强. 冲击致损的夹层玻璃板开裂后的静载强度[J]. 上海交通大学学报, 2020, 54(3): 227-238.