陈秀华 - 上海交通大学 - 航空航天学院

个人简介

陈秀华职务：航空宇航推进系党支部书记、高级工程师工作经历时间任职单位职务 2017年-至今上海交通大学航空航天学院高级工程师 2004年-2016年上海交通大学工程师 2013年-2014年中国商用飞机公司（挂职）副主任设计师 2012年英国牛津大学访问学者 1997年-2004年中航工业沈阳飞机设计研究所工程师教育背景时间毕业院校学历 2014年上海交通大学博士 2004年大连理工大学硕士 1997年北京航空航天大学本科主要科研项目（1）航空发动机复合材料反推叶栅结构设计分析与试验（来源：基金、航发）（2）航空发动机复合材料风扇叶片材料分析与验证（来源：基金、航发）（3）热塑性复合材料结构设计、分析与试验验证（来源：商飞，航空工业，航发基金）（4）结构功能一体化超材料设计与仿真（来源：基金、航空工业）（5）复合材料结构损伤识别、修理评估（来源：商飞，航空工业）（6）航空发动机疲劳损伤分析软件开发（来源：航发）专著《飞机结构设计与强度计算》、《飞机复合材料结构强度分析》、《飞机材料与结构检测技术》、《夹层结构手册》、《结构复合材料》、《复合结构损伤的影响建模》、《复合材料手册CMH-17-5》。荣誉奖励（1）国防科技进步奖三等奖；（2）航空工业集团公司科学技术奖二等奖；（3）上海市技术发明三等奖；（4）上海市科技进步二等奖。

研究领域

（1）飞机、航空发动机结构强度计算；（2）复合材料的设计、分析与试验验证技术；（3）CAE仿真软件的开发。

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

（1）Jian Zhang, Xiuhua Chen*, Aiqin Tian, Yin Fan，Tests and numerical study of single-lap thermoplastic composite joints bolted by countersunk，Materials，24 March，2022，MDPI （2）Xiuhua Chen, Hui-Shen Shen, Thermo-mechanical postbuckling analysis of sandwich cylindrical panels with functionally graded auxetic GRMMC core supported by elastic foundations，Ocean Engineering，247 (2022) 110661 （3）Pu-Song Ma, Jia-Yu Ye, Kun Tian, Xiu-Hua Chen*, Lu-Wen Zhang*, Fracture phase field modeling of 3D stitched composite with optimized suture design, Computer Methods in Applied Mechanics and Engineering, 392C (2022) 114650 （4）Yunzhi Huang, Miaolin Feng, Xiuhua Chen*,Pull-in instability and vibration of quasicrystal circular nanoplate actuator based on surface effect and nonlocal elastic theory, Archive of Applied Mechanics, 02 Feb 2022, MDPI （5）Taoye Lu, Hui-Shen Shen, Hai Wang, Xiuhua Chen*, Compression-after-impact effect on postbuckling behavior of thermoplastic composite laminated plates, Aerospace Science and Technology 121 (2022) 107384 （6）Yunzhi Huang, Miaolin Feng*, and Xiuhua Chen*, Stability analysis of quasicrystal torsion micromirror actuator based on the strain gradient theory, Acta Mechanica Sinica, Vol. 38, 521390 (2022) （7）Xiuhua Chen, Hui-Shen Shen, Y,Xiang,Thermo-mechanical postbuckling analysis of sandwich cylindrical shells with functionally graded auxetic GRMMC core surrounded by an elastic medium, Thin-Walled Structures, 171 (2022) 108755 （8）Xiuhua Chen, Hui-Shen Shen,Xu-Hao Huang，Thermo-mechanical postbuckling analysis of sandwich plates with functionally graded auxetic GRMMC core on elastic foundations，Composite Structures，279 (2022) 114796 （9）Taoye Lu, Xiuhua Chen*, Hai Wang, Predicting compression-after-impact behavior of thermoplastic composite laminates by an experiment-based approach，Composites Science and Technology，213 (2021) 108952 （10）Taoye Lu, Xiuhua Chen, Hai Wang, Lei Zhang, Yinhua Zhou，A novel experiment-based approach on nonlinear bending analysis of thermoplastic composite laminates，Composites Part B，209 (2021) 108611 （11）Xuesong Zhong，Xiuhua Chen，Contour Segmentation of Image Damage Detection Based on Fully Convolutional Neural Network，Proceedings of the International Conference on Aerospace System Science and Engineering 2020 （12）Taoye Lu, Xiuhua Chen*, Hai Wang, Lei Zhang, Yinhua Zhou, Comparison of low-velocity impact damage in thermoplastic and thermoset composites by non-destructive three-dimensional X-ray microscope, Polymer Testing, 91, 106730 2020, https://doi.org/10.1016/j.polymertesting.2020.106730. （13）Chi Duan, Xiuhua Chen*, Ruowei Li, The numerical simulation of fatigue crack propagation in Inconel 718 alloy at different temperatures, Aerospace System, 2020. https://doi.org/10.1007/s42401-020-00044-z （14）Y. Qi, X. Chen, M. Feng, Molecular Dynamics-Based Analysis of the Effect of Voids and HCP-Phase Inclusion on Deformation of Single-Crystal CoCrFeMnNi High-Entropy Alloy, Materials Science & Engineering A, 791, 2020. （15）Y. Qi, X. Chen, M. Feng, Molecular dynamics-based analysis of the effect of temperature and strain rate on deformation of nanocrystalline CoCrFeMnNi high-entropy alloy, Applied Physics A,126, 529(1-10), 2020. （16）L. Meng, M. Yang, X. Chen, Y. Hu, M. Feng, Physically short fatigue crack growth from notch described by plasticity-corrected stress intensity factor, International Journal of Mechanical Sciences,176,105544(1-9), 2020. （17）L.W. Zhang, M.F. Kai, X.H. Chen, Si-doped graphene in geopolymer: Its interfacial chemical bonding, structure evolution and ultrastrong reinforcing ability, Cement and Concrete Composites, 109, 103522, 2020. （18）ZhouZhou Pan, Xiuhua Chen*, LuWen Zhang, Modeling large amplitude vibration of pretwisted hybrid composite blades containing CNTRC layers and matrix cracked FRC layers, Applied Mathematical Modelling, 83, 640-659, 2020. （19）L.W. Zhang, Z.Z. Pan, X. Chen*. Vibration characteristics of matrix cracked pretwisted hybrid composite blades containing CNTRC layers. Journal of Sound and Vibration 473 (2020) 115242. （20）Y. Qi, X. Chen, M. Feng, Effect of void defect on c-axis deformation of single-crystal Ti under uniaxial stress conditions: Evolution of tension twinning and dislocations, Journal of Materials Research, 34, 3699-3706, 2019. （21）T. He, M. Feng, X. Chen, Martensitic transformation effect on dislocation emission from a semi-infinite crack tip in nanocomposites, Acta Mechanica Solida Sinica, 32, 160-172, 2019. （22）T. He, M. Feng, X. Chen, Crack interaction with nanoscale twinning near a second-phase particle in fine-grained magnesium alloy, Mathematics and Mechanics of Solids, 24, 1243-1255, 2019. （23）Yao Siyuan, Chen Xiuhua*, Tension-compression fatigue behavior of 3D woven composites, IOP Conference Series: Materials Science and Engineering, Volume: 388, Pages: 012016 (6 pp.) ,DOI: 10.1088/1757-899X/388/1/012016 , 2018 （24）Hai-Tao Fan, Hai Wang, Xiu-Hua Chen, Optimization of multi-sandwich-panel composite structures for minimum weight with strength and buckling considerations, Science and Engineering of Composite Materials. 25(2):229-241, 2018

学术兼职

Journal of thermoplastic composite materials，Aerospace Science and Technology，Aerospace System，航空学报、复合材料学报、上海交通大学学报审稿专家。