个人简介
2013/12 - 至今 合肥工业大学, 材料科学与工程学院, 副教授
2012/09 -2013/09 法国Grenoble Institute of Technology (格勒诺布尔国立综合理工学院), 博士后
2010/10 -2012/06 澳大利亚Deakin University (迪肯大学) , 国家留学基金委公派博士研究生
2006/09 - 2011/06 中南大学, 材料科学与工程学院，工学博士学位
2002/09 - 2006/06安徽大学,物理与材料科学学院，理学学士
研究领域
1、新型高性能铝合金材料制备及加工技术:
包括:新型合金成分设计、多元素复合调控技术、新型热处理工艺等。
2、变形镁合金塑性加工技术：
包括：镁合金热加工技术、晶粒控制技术以及织构控制方法，以及低温加工过程中的孪生控制的织构软化行为及应力流变规律等。
3、新型高性能铜合金材料制备及加工技术
包括：新型高强高导电铜合金、弥散强化铜合金以及新型合金的成分设计、形变热处理工艺、相变行为等
4、材料组织及性能高级检测及分析技术
包括：精确宏观织构、微观织构检测分析、高级透射电子显微学研究等
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Zhen Zhang*, Pavel Cizek, Matthew Barnett, Scripta Materials, 67 (2012) 1015–1018. A critical test of twin induced softening in a magnesium alloy extruded to a strain of 0.7 at room temperature.
2. Zhen Zhang*, Mingpu-Wang, Materials Science Engineering A 2010(527): 6467–6473, Orientation analyses for twinning behavior in small-strain hot-rolling process of twin-roll cast AZ31B sheet.
3. Zhen Zhang*, Materials Science Engineering A, 2013(527)6467–6473, Twinning and its related work hardening during the ambient extrusion of a magnesium alloy
4. Zhen Zhang*, Mingpu-wang, Materials Characterization 2011(62): 647-650, A method based on Euler space for twinning analyses in magnesium alloy
5. Zhen Zhang*, Mingpu-wang, Journal of Alloys and Compounds 2011(509): 5571–5580, Twinning, dynamic recovery and recrystallization in the hot rolling process of win-roll cast AZ31B alloy.
6. Zhen Zhang*, Mingpu-wang, Journal of Alloys and Compounds 2012(512) 73-78, Formation of shearing bands in the hot-rolling process of AZ31 alloy
7. Zhen Zhang*, Mingpu-wang , Journal of Alloys and Compounds 2012(544) 159-165, Preferential dynamic recrystallization at original grain boundaries in the hot-rolling process of AZ31 alloy.
8. Zhen Zhang*, Edgar Rauch, Muriel Veron, Materials Letters 2013(111)192-196, Twinning analyses in a magnesium alloy with tilting series scanning method using a TEM based orientation mapping system.
9. Zhen Zhang*, Materials Letters 2014(116)131–134，The formation of double peaks in the basal texture during ambient extrusion of an AZ31 magnesium alloy
10. Zhen Zhang*, Twinning related plastic mechanism of a magnesium alloy at a high strain stage of ambient sheath extrusion, Materials Letters, 119, pp79-83, 2014
11. Shiang Zhou, Zhen Zhang*, Ming Li, Dejiang Pan, Hailin Su, Xiaodong Du, Ping Li, YuchengWu*, Effect of Sc on microstructure and mechanical properties of as-cast Al–Mg alloys, Materials and Design,2016(90)1077-1084
12. Shiang Zhou, Zhen Zhang*, Ming Li, Dejiang Pan, Hailin Su, Xiaodong Du, Ping Li, YuchengWu*, Formation of the eutecticum with multilayer structure, Materials Letters 2016(164)19–22
13. 张真, 汪明朴*, 中国有色金属学报, 热轧过程中AZ31B合金的组织和织构演变2010 (20)1447-1454
14. Zhen Zhang*, Edgar F. Rauch and Muriel Véron, TEM based micro-texture measurement for twinning in a hot-rolled magnesium alloy with Astar System, Microscopy & Microanalysis 2013(Conference), Indianapolis, Indiana, U.S.A
15. M. Véron*, Z. Zhang, E.F. Rauch, Automated phase detection resolution using TEM spot diffraction patterns, Microscopy & Microanalysis 2013(Conference), Indianapolis, Indiana, U.S.A
16. 郭明星, 张真, 陈畅，矿冶工程，2009(01)不同厚度Ta-2.5 wt%W合金箔材退火行为的研究
17. 李树梅, 汪明朴, 张真, 李周. 中国有色金属学报, AZ31B 镁合金的低温压缩变形机制, 2010(20):1254-1259
18. 郭明星, 汪明朴, 张真, 陈畅, 申坤, 稀有金属材料与工程 2008(3)过程参数对双束熔体原位复合法制备的Cu-TiB2合金组织结构的影响
19. 郭明星, 汪明朴, 申坤, 张真, 李树梅, 中国有色金属学，2007(17)1440-1446双束熔体原位复合法制备Cu-TiB2合金的热力学与动力学
京公网安备 11010802027423号