近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
发表论文(SCI)：
1. Xianzhi Xiong, Chuanjun Tu*, Ding Chen, et al. Arc erosion wear characteristics and mechanisms of pure carbon strip against copper under arcing conditions[J]. Tribology Letters, 2014,53(1).
2. Tenghui Song, Chuanjun Tu*, Pengyang Feng, Mingzai Wu*, Gang Chen, Wei dong Wang. A novel preparation of resin-based electrical contact material impregnated with sulfonated graphene[J]. RSC Advances,2017,7.
3. Chuan Jun Tu, Ding Chen*, Zhen Hua Chen, et al. Improving the Tribological Behavior of Graphite/Cu Matrix Self-lubricating Composite Contact Strip by Electroplating Zn on Graphite[J]. Tribology Letters, 2008,31(2).
4. Chuanjun Tu, Zhenhua Chen*, Jintong Xia. Thermal wear and electrical sliding wear behaviors of the polyimide modified polymer-matrix contact strip[J]. Tribology International, 2009, 42(6).
5. C.J. Tu*, L.P. Deng, D.Chen, et al. Preparation and Wear Properties with Electrical Current of novel Cf/Cu-C Contact Strip[J]. Materials Science and Technology,2017,33(1).
6. Z.H. Chen, C.J. Tu*, D. Chen, et al. Preparation and tribological investigation of resin-matrix contact strip with variable current[J]. Materials Science and Technology, 2009, 25(5).
7. TU Chuan-jun, CHEN Zhen-hua*, CHEN Ding, et al. Tribological behavior and wear mechanism of the resin-matrix contact strip against copper with electrical current[J]. Trans.Nonferrous. Met.Soc.China, 2008, 18(5).
8. TU Chuan-jun, HUANG Qi-zhong*, ZHANG Ming-yu, et al. Microstructures and formation mechanism of headstand pyrocarbon cones developed by electromagnetic-field-assisted CVD[J]. Trans. Nonferrous Met. Soc. China, 2012, 22(10).
9. C.J. Tu,Q.Z. Huang*, Z.Y. Xie, et al. Wear behavior of the SiC/PyC composite materials by electromagnetic-field-assisted CVI[J]. Trans.Nonferrous.Met.Soc.China, 2015, 25(3).
11. Jin-Tong Xia, Chuan-Jun Tu,Yan Li, et al. Preparation of Composite Electroheat Carbon Film[J].Trans.Nonferrous.Met.Soc.China. 2005, 15(5).
12. Feng peng-yang, Tu chuan-jun*,Chen zha-kun,et al. Effect of sulfonated graphene on current-carrying wear characteristics of resin matrix carbon brush[J]. 新型炭材料. 2017,32(4).
13. L Liang，ZY Xie，CJ Tu,et al. Influence of graphite powder on the properties of carbon paper for proton- exchange membrane fuel cells [J]. 新型炭材料. 2012, 27(5).
14.Shouchuan Zhang, Ruirui Hu, Peng Dai, Xinxin Yu, Zongling Ding, Mingzai Wu*, Guang Li, YongqingMa, Chuanjun Tu*. Synthesis of rambutan-like MoS2/mesoporous carbon spheres nanocomposites with excellent performance for supercapacitors[J].Applied Surface Science,2017,396.
15. Ding Chen, Yingzhe Zhang, Chuanjun Tu. Preparation of high saturation magnetic MgFe2O4 nanoparticles by microwave-assisted ball milling[J]. Mater Lett,2012,82.
16. Gang CHEN,Xian YANG,Bin SU,Chuan-jun TU.Criterion of gas and solid dual-phase flow atomization crash in molten metal[J]. Transactions of Nonferrous Metals Society of China,2014, (1).
17. Tongtong Jiang, Siyu Yang, Peng Dai, Xinxin Yu, Zhiman Bai, Mingzai Wu*, Guang Lia, Chuanjun Tu*.Economic synthesis of Co3S4 ultrathin nanosheet/reduced graphene oxide composites and their application as an efficient counter electrode for dye-sensitized solar cells[J].Electrochimica Acta,2018,261.
18. ZOU Ze-yu,TU Chuan-jun*，XIAN Yong，HONG Li-rui，LIU Tian-hua，JIANG Yong-hua. Effect of heat treatment temperature on the microstructure of spherical sulfonated graphene[J].新型炭材料,2020, 35(2)
19. Chuanjun Tu*, Lirui Hong, Tenghui Song, Xuanke Li, Qinbao Dou, Yichao Ding, Tingting Liao, Sisi Zhang,Guoqiang Gao,Ziqiu Wang, Yonghua Jiang. Superior mechanical properties of sulfonated graphene reinforced carbon-graphite composites[J]. Carbon,2019,148.
20. Yong Xian, Zeyu Zou, Chuanjun Tu*, Yichao Ding, Tingting Liao, Fengchun Zhang, Qiang Luo, Guangning Wu, Guoqiang Gao. Identifying the Effects of Cobalt Addition in Copper-graphene Nanoplatelet Composites towards Improved Tribological Performance[J]. Journal of Alloys and Compounds, 2020,835.
21. Yong Xian, Zeyu Zou, Chuanjun Tu*, Yichao Ding, Yuxuan Xu, Guoqiang Gao. Direct quantification of the effects of titanium on the copper/graphene interfacial strength[J]. Materials Letters, 2020,273.
22. Sisi Zhang, Chuanjun Tu*, Xiang Li, et al. Sulfonated graphene improves wear resistance of pantograph carbon slider materials under normal and wet conditions[J]. New Carbon Materials, 2020,(accepted).
23. Weize Li, Rui Zhang, Zhen Chen, Binbin Fan, Kuikui Xiao, Hui Liu, Peng Gao, Jianfang Wu, Chuanjun Tu*, Jilei Liu*.Microstructure-dependent K+ Storage in Porous Hard Carbon[J]. Small 2021, 17.
24.Tu Chuan-jun*, Gong Pe, Ren Gai-mei, Chen Gang, Chen Jian*,Hong Li-rui, Liu Ping. Synergistic regulation of current-carrying wear performance of resin matrix carbon brush composites with tungsten copper composite powder[J]. Journal of Central South University,2021,28(10).
25. Liu Ping, Chuanjun Tu*, Pei Gong, Jiao Tan, Yanli Song, Peng Yan, Xin Shen. Effect of dichloromethane on the performance and yield rate of pure green petroleum coke products[J]. Materials Letters, 2021,131387.
26. Yuxuan Xu, Chuanjun Tu*, Yanli Liu, et al. Superior tribology property of zinc phosphate impregnated graphite block at high-temperature oxidative friction [J]. Carbon letters, 2022,32.
27. Gaimei Ren, Chuanjun Tu*, Yanli Liu, Pei Gong, Huyue Yang, Yixing Chen, Yuxuan Xu, Jiying Tian. Preparation of WS2 with Varying Thickness and Its Enhanced Anti-wear Property in Resin-Based Carbon[J]. Journal of Materials Engineering and Performance, 2022, DOI：10.1007/s11665-022-07372-5
28.Yixing Chen, Chuanjun Tu*, Yanli Liu, Ping Liu, Pei Gong, Guangning Wu, Xia Huang, Jian Chen, Tianhua Liu, Jizhou Jiang*. Microstructure and mechanical properties of carbon graphite composites reinforced by carbon nanofibers. Carbon Letters, 2022, DOI：10.1007/s42823-022-00445-4
29.Ping Liu, Chuanjun Tu*, Yanli Liu, Ruizhi You, Lin Li, Yanli Song. Carbon sealing materials with low-density and high-strength fabricated bya new process. Materials letters, 336 (2023), 133826.
30.Jiao Tan, Ping Liu, Pei Gong, Yanli Liu, Jian Chen, Run Li*, Chuanjun Tu*. Enhanced self-sintering mechanical strength of carbon blocks via removal of light molecular-weight compound in green petroleum coke[J]. Fuel, 2023,(accepted).
发表论文(EI)：
1. 涂川俊,夏金童*,卢学峰. 复合型炭系导电发热涂料的研究[J].中南大学学报(自然科学版),2005, 36(1): 25-28.
2. 陈振华,涂川俊*,陈刚. 改性树脂基滑板的制备及其热磨损性能[J].中国有色金属学报,2007, 17(11):1785-1791.
3. 涂川俊,陈振华*,夏金童,等. 硅油浸渍对树脂基滑板/铜抗电弧侵蚀磨损性能的影响[J].中国有色金属学报,2008, 18(8):1479-1486
4. 邓联谱, 涂川俊*, 陈刚,等. 抑弧油对滑板用C/C复合材料载流磨损性能的影响[J]. 粉末冶金材料科学与工程, 2014(6):948-954.
5. 杨鑫,苏哲安,黄启忠,涂川俊,柴立元. ZrC质量分数对C/C-ZrC复合材料力学性能的影响[J].中南大学学报 (自然科学版), 2013, 44(2):508-514.
发表论文(教改论文)：
1. 涂川俊,刘吉梓,伍翠兰,谢娟. 研究生“知识创新”培养机制初探[J]. 中国高校科技,2014(Z1):73-74
2. 涂川俊,李玉平,姚锋. 工科大三学生顶岗实习的实施过程和效果探讨[J]. 大家, 2011(24):254-255
3. 涂川俊,易清平. 助优与避险—助学贷款之我见[J]. 大学教育科学,2002(1):86-88
4.涂川俊,张伟,张福全,李玉平,陈江华,张思斯.学术交流平台构建与研究生创新能力培养的关系研究[J]. 当代教育实践与教学研究,2019(07):88-89,92
发表论文(其它)：
1. 涂川俊,夏金童,张文皓.炭系导电涂料的研究进展[J]. 炭素技术, 2004, 23(3):31-36.
2. 夏金童,涂川俊*,陈振华,等.炭系电热涂料的制备及其自控温性能研究[J].矿冶工程, 2009, 29(2):79-82.
3. 涂川俊,夏金童,蒋许欢,等. 复合型抗氧化剂对预焙阳极材料抗氧化性能的影响[J].矿冶工程, 2011, 31(4):122-126.
4. 熊贤至,涂川俊*,陈刚,等. 受电弓滑板载流磨损行为及其磨损面微结构研究进展[J].材料导报, 2014, 28(1):20-25.
5. 王啸东,涂川俊*,陈刚,等. 油溶性缓蚀剂的研究现状及发展趋势[J].工业催化, 2014, 22(7):493-499.
6. 涂川俊,陈振华,陈刚,等. 炭系电力机车受电弓滑板材料的研究进展[J].炭素技术, 2007, 26(4):23-29.
7. 涂川俊,夏金童,李焰,等.复合型无机炭系电热涂料的研究[J].炭素技术, 2006, 25(5):16-21.
8. 高守磊,夏金童,涂川俊,等. 预焙阳极氧化机理与提高抗氧化性主要方法[J].炭素技术, 2008, 27(2):37-40.
9. 陈刚,段为樑,涂川俊,等. 酚醛和丁腈橡胶配比对铝基复合材料用树脂基摩擦材料性能的影响[J]. 非金属矿, 2013(1):77-80.
10. 刘军,严红革,陈刚,涂川俊,等. 铜基复合材料受电弓滑板摩擦磨损及电阻率的研究[J]. 矿冶工程, 2007, 27(2):71-74.
11.卢学峰,夏金童,张文皓,涂川俊. 新型高阻炭刷的制备研究[J]. 湘潭大学自然科学学报, 2005, 27(2):131-135.
12. 呼友明,夏金童,李劲,涂川俊,等. 不同活化剂对块状多孔炭材料吸附性能和硬度的影响[J].炭素, 2010(2):16-20.
13. 涂川俊,陈振华,夏金童,严红革,吴旭升.聚合物基电接触材料低压受流磨损性能研究[J].炭素技术,2007,26(6):25-30.
14. 宋腾辉, 涂川俊*,邓联谱,等. 石墨烯改性方法对树脂基炭刷载流磨损性能影响研究[J].炭素, 2016,(4):19-27.
15. 王卫东,涂川俊,宋腾辉,等. 我国高速动车组用浸金属炭滑板的服役工况及损伤特点的调研[J].炭素,2017,(1):10-15.
16. 陈立康,刘田华,涂川俊.铝用炭阳极静、动态弹性模量及与阳极理化性能的关联[J].炭素,2017,(3):18-23.
17. 庄存甲, 邹泽玉, 涂川俊*, 鲜勇, 张思斯. 氧化石墨烯改性沥青基块体炭材料的显微结构及力学性能[J]. 炭素, 2017,(4):14-20.
18. 刘田华,涂川俊*,陈立康,邹泽玉.铝用阳极中异质炭相晶粒度匹配性对微裂纹随机分布的影响[J].炭素,2018,(4):5-11,19
19. 刘宇亮,涂川俊*,邹泽玉.磺化碳纳米粉和二硫化钨添加剂对炭刷的微结构调控及磨损性能的研究[J]. 炭素技术, 2019, 38(4):42-47.
20. 李正胜,涂川俊*,宋欢,陈磊,刘兴隆.轨道交通用A766芳纶绝缘纸的性能研究[J].绝缘材料,2021,54(5):21-26.
21. 徐宇轩,谭姣,涂川俊*,梁世林,殷景峰,熊伟,刘定发. 温度、载荷变化对密封用炭石墨材料摩擦磨损性能的影响[J].炭素,2021, (1):3-7,10.
授权的发明专利（第一发明人）：
1. 涂川俊,熊贤至,邓联谱,等. 一种受电弓滑板用复合材料及其制备方法ZL 201310111822.2 (2015年)
2. 涂川俊, 邓联谱. 一种自愈合环保型钢铁常温发黑剂ZL 201310199938.6 (2015年)
3. 涂川俊,朱雨,王勇军. 一种中性除油除锈剂及其制备方法 ZL201410171064.8 (2016年)
4. 涂川俊, 邓联谱, 陈刚, 等. 氧化石墨烯质焙烧型电接触材料及其制备方法ZL201410782776.3 (2016年)
5. 涂川俊, 冯鹏洋, 韦巩. 一种自均质耐磨树脂型炭刷及制备方法 ZL201510355220.0 (2017年）
6. 涂川俊,宋腾辉,徐宇轩.一种摩擦膜具有自我修复功能的树脂型电碳材料及其制备方法 ZL201610969459.1 (2019年）
7. 涂川俊,邹泽玉,鲜勇,等.一种磺酸基功能化石墨烯分散体系及其制备方法 ZL201810388076.4 (2020年）
8. 涂川俊,张思斯,邹泽玉,等.一种炭石墨材料用人造挥发份及其制备方法ZL201811025551.8 (2020年)
9. 涂川俊,洪莉睿,谭海林,等. 一种碳黑/聚苯胺纳米纤维复合材料及其制备方法 ZL201911218856.5（2020年）
10. 涂川俊,巩佩,吴广宁,等.一种改性鳞片石墨粉末、树脂基炭刷及制备方法ZL201910950437.4（2021年）
11. 涂川俊,任改梅,巩佩,等.一种镀铜二硫化钨的制备方法、镀铜二硫化钨及其应用 ZL202010705275.0（2021年）
12. 涂川俊,陈宜兴,张思斯,等.一种碳石墨材料及其制备方法 ZL202010812975.X（2021年）
13. 涂川俊,徐宇轩,邹泽玉.一种铜基复合材料前驱体粉末的制备方法 ZL202010863528.7（2021年）
14. 涂川俊,谭娇,刘平,等. 组合型偶联剂、改性碳质骨料及其制备方法和电接触材料 ZL202110573394.X（2022年）
15. 涂川俊,刘平,谭姣,等.一种溶剂预处理生焦粉制备高性能炭石墨材料的方法202110680309.X（2022年）
授权的发明专利（参与）：
1. 陈刚,严红革,涂川俊,等. 喷射沉积制备中空盘件的方法ZL201110400685.5
2. 陈刚,涂川俊,杨现,等. 一种基于铝热反应的高温钢液喷射沉积轧辊修复技术ZL 201210234444.2
3. 窦钦宝,涂川俊, 等. 密封件用焦炭/磺化石墨烯炭石墨材料及其制备方法ZL201610270096.2
4. 汤汉良,陈刚,严红革,涂川俊,赵梓成.一种喷射沉积梯度铝合金复合材料活塞的镦挤制法及其装置ZL201410445130.6
5. 吴广宁,涂川俊,高国强,杨泽锋,魏文赋,等.一种碳纳米纤维增强受电弓复合碳滑板及其制备方法ZL201811071810.0
授权的实用新型专利（第一发明人）：
1. 涂川俊,陈鼎, 吴旭升,等. 用于电接触材料载流摩擦磨损的试验机ZL201220060420.5
行业标准的制修订：
1. 梁世林, 涂川俊, 白德旭, 等. 《JB/T 2750-2020高纯石墨》中华人民共和国机械行业标准. 2020-04-16发布,2021-01-01实施.
京公网安备 11010802027423号