蒋睿嵩 - 四川大学 - 机械工程学院

个人简介

教育背景及工作经历 2002.09 - 2006.07 西北工业大学飞行器制造工程学士 2006.09 - 2011.04 西北工业大学航空宇航制造工程博士 2012.11 - 2013.11 美国南加州大学访问学者 2011.06 - 2014.11 中国工程物理研究院总体工程研究所工程师 2014.12 - 2018.11 西北工业大学副研究员 2018.12 至今四川大学副研究员主要从事航空发动机复杂零件高性能制造技术、复杂结构设计优化等方面的基础及应用研究工作。围绕上述研究内容，获技术发明二等奖1项；合作出版英文学术专著1部；在《Chinese J Aeronaut》、《J Manuf Processes》、《Int J Adv Manuf Tech》、《Measurement》、《中国科学：技术科学》等国内外知名期刊上发表学术论文80余篇，SCI收录40余篇。JAMT/JCIM/M&MT/《航空学报》等多个国内外期刊审稿人，兼任航空发动机先进制造技术教育部工程研究中心特聘研究员、中国图学学会智能工厂专委会委员、中国机械工程学会工业设计分会委员。近年来，承担/参与了自然科学基金、两机专项国家重大专项、民机专项国家重大专项、XX加强计划重点项目、中国博士后科学基金、中央高校基础研究基金、国家“863计划”项目、科技支撑计划项目、XX预研、中国工程院重大咨询项目（“创新设计发展战略研究”）、企业横向项目等课题20余项。开设课程本科：飞行器制造概论、计算机辅助制造研究生：模具设计与优化在研项目： [1] 国家“两机”重大专项项目：涡轮叶片型面、壁厚与气膜孔精度控制基础技术研究 [2] 四川省科技成果转移转化示范项目：航空发动机叶片精密高效加工技术成果转移转化 [3] 四川省高新技术领域重点研发计划项目：航空发动机整体叶盘（环）高精高效数字化制造与检测技术研发及应用 [4] 四川省高新技术领域重点研发计划项目: CFRP超声振动辅助制孔及其完整性评价技术研究 [5] 国家自然科学基金-NSAF联合基金：面向动力学性能优化的多组件系统保结构布局设计方法研究 [6] XX加强计划项目：超快激光加工异型孔完整性评估技术 [7] XX计划项目：表面加工质量对650℃高温钛合金使用的影响评价研究授权专利涡轮叶片陶芯软芯撑3D打印方法（ZL2016103774380）涡轮叶片陶芯软芯撑加工方法（ZL2016103746464）原位自生型TiB2颗粒增强铝基复合材料叶片切削加工方法（ZL2016103746465）原位自生型TiB2颗粒增强铝基复合材料叶片磨削加工方法（ZL 2016 1 0531609.0）原位自生型TiB2颗粒增强铝基复合材料叶片车削加工方法（ZL 2016 1 0530382.8）原位自生型TiB2颗粒增强铝基复合材料超声振动辅助加工方法（ZL 2018 1 1340613.4）基于坐标值的微小孔几何精度评定方法（ZL 2019 1 0262260.9）

研究领域

航空复杂件高性能制造技术、多能场加工技术、复杂结构优化设计方法

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1] Zhang DH, Cheng YY, Jiang RS, et al. "Chapter 3: Cavity Design Method for Investment Casting Die of Blade" "Chapter 4: Design of the Die Base for the Investment Casting Blade". Turbine blade investment casting die technology [M]. Springer ISBN: 978-3-662-54186-9 期刊论文（第一作者&通讯作者）： [2] Weipeng Hu*, Mengbo Xu, Ruisong Jiang*, Fan Zhang, Chuanzeng Zhang, Zichen Deng. Wave Propagation in Non-homogeneous Centrosymmetric Damping Plate Subjected to Impact Series [J]. Journal of Vibration Engineering & Technologies, https://doi.org/10.1007/s42417-021-00355-1. [3] Zhanfei Zhang, Wenhu Wang, Chengcheng Jin, Ruisong Jiang*, Yifeng Xiong, Xiaobing Zhang, Zhong Mao. Investigation on efficiency and quality for ultrashort pulsed laser ablation of nickel-based single crystal alloy DD6 [J]. The International of Journal of Advanced Manufacturing Technology, 2021, 114: 883-897. [4] Yifeng Xiong, Wenhu Wang, Yaoyao Shi, Ruisong Jiang*, Chenwei Shan, Xiaofen Liu, Kunyang Lin. Investigation on surface roughness, residual stress and fatigue property of milling in-situ TiB2/7050Al metal matrix composites [J]. Chinese Journal of Aeronautics, 2021, 34(4): 451-464. [5] Xiaofen Liu, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong, Kunyang Lin, Junchen Li, Chenwei Shan. Analytical model of cutting force in axial ultrasonic vibra-tion-assisted milling in-situ TiB2/7050Al PRMMCs [J]. Chinese Journal of Aeronautics, 2021, 34(4): 160-173. [6] ZHANG Shuai-qi, YANG Zhong-xue, JIANG Rui-song*, JIN Qi-chao, ZHANG Qiang, WANG Wen-hu. Effect of creep feed grinding on surface integrity and fatigue life of Ni3Al based superalloy IC10 [J]. Chinese Journal of Aeronautics, 2021, 34(1): 438-448. [7] Xiaofen Liu, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong, Kunyang Lin, Junchen Li. Investigation on surface roughness in axial ultrasonic vibration assisted milling in-situ TiB2/7050Al MMCs [J]. The International of Journal of Advanced Manufacturing Technology, 2020, 111: 63-75. [8] Yifeng Xiong, Wenhu Wang, Yaoyao Shi, Ruisong Jiang*, Kunyang Lin, Xiaofen Liu. Fatigue behavior of in-situ TiB2/7050Al metal matrix composites: Fracture mechanisms and fatigue life modeling after milling [J]. International Journal of Fatigue, 2020, 138: 105698. [9] Xiaoxiang Zhu, Wenhu Wang, Ruisong Jiang*, Zhanfei Zhang, Bo Huang, Xiuwei Ma. Research on ultrasonic assisted drilling in micro-hole machining of DD6 [J]. Advances in Manufacturing, 2020, 8(3): 405-417. [10] Xiaoxiang Zhu, Wenhu Wang, Ruisong Jiang*, Xiaofen Liu, Kunyang Lin. Performances of Ni3Al-based intermetallics IC10 in creep feed grinding [J]. The International Journal of Advanced Manufacturing Technology, 2020, 108: 809-820. [11] Zhanfei Zhang, Wenhu Wang, Ruisong Jiang*, Xiaobing Zhang, Yifeng Xiong, Zhong Mao. Investigation on geometric precision and surface quality of microholes machined by ultrafast laser [J]. Optics & Laser Technology, 2020, 121, 105834. [12] Ruisong Jiang*, Wenhu Wang, Zengqiang Wang. Noise filtering and multisample integration for CMM data of free-form surface [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(5-8): 1239-1247. [13] Kunyang Lin, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong. Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB2/7050 Al metal matrix composites [J]. The International Journal of Advanced Manufacturing Technology, 2019， 100(1-4): 143-151. [14] Kunyang Lin, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong, Chenwei Shan. Thermo-mechanical behavior and constitutive modeling of In situ TiB2/7050 Al metal matrix composites over wide temperature and strain rate ranges [J]. Materials, 2019, 12(8): 1212. [15] Kang CUI, Wenhu WANG, Ruisong JIANG*, Dezhong ZHAO. A wall-thickness compensation strategy for wax pattern of hollow turbine blade [J]. Chinese Journal of Aeronautics, 2019, 32(8): 1982-1993. [16] Xiong Yifeng, Wang Wenhu, Jiang Ruisong*, Lin Kunyang. Analytical model of workpiece temperature in end milling in-situ TiB2/7050Al metal matrix composites [J]. International Journal of Mechanical Sciences, 2018, 149: 285-297. [17] Kang Cui, Wenhu Wang, Ruisong Jiang*, Dezhong Zhao. Layout optimization method for core holders in wax pattern mold of hollow turbine blade [J]. The International Journal of Advanced Manufacturing Technology, 2018, 98(1-4): 1031-1045. [18] Yifeng Xiong, Wenhu Wang, Ruisong Jiang*, Kunyang Lin. Machinability of in situ TiB2 particle reinforced 7050Al matrix composites with TiAlN coating tool [J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(9-12): 3831-3825. [19] 曹旭康, 汪文虎, 蒋睿嵩*, 王楠. 基于动力学响应的多组件系统布局优化方法 [J]. 计算力学学报, 2018, 35(2): 152-159. [20] Kuiyang Lin, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong, Dezhong Zhao. Evaluation of residual stress distribution and relaxation on in situ TiB2/7050 Al Composites [J]. Materials, 2018, 11(5): 706. [21] Yifeng Xiong, Wenhu Wang, Ruisong Jiang*, Kunyang Lin, Mingwei Shao. Mechanisms and FEM Simulation of Chip Formation in Orthogonal Cutting In-Situ TiB2/7050Al MMC [J]. Materials, 2018, 11(4): 606. SCI: 000434710200148 EI: 20181605035317 [22] 崔康, 汪文虎, 蒋睿嵩*, 赵德中, 靳淇超. 空心涡轮叶片精铸模具陶芯夹紧布局优化方法 [J]. 计算机集成制造系统, 2018, 24(1): 34-42. [23] Ruisong Jiang*, Xinfa Chen, Renwei Ge, Wenhu Wang, Guodong Song. Influence of TiB2 particles on machinability and machining parameter optimization of TiB2Al MMCs [J]. Chinese Journal of Aeronautics, 2018, 31(1): 187-196. [24] Kang Cui, Wenhu Wang, Ruisong Jiang*, Dezhong Zhao. Model reconstruction in adaptive machining for near-net-shape rolling compressor blades [J]. International Journal of Computer Integrated Manufacturing, 2018, 31(2): 138-151. [25] 张永强, 周超羡, 林坤阳, 汪文虎, 蒋睿嵩*.原位自生 TiB2/Al 复合材料磨削表面质量研究 [J]. 航空制造技术, 2017, 17: 101-106. [26] Yifeng Xiong, Wenhu Wang, Ruisong Jiang*, Kunyang Lin. A study on cutting force of machining in situ TiB2 particle-reinforced 7050Al Alloy matrix composites [J]. Metals, 2017, 7(6): 197. [27] 崔康, 汪文虎, 蒋睿嵩*, 赵德中, 靳淇超. 基于力约束的空心涡轮叶片陶芯定位方法 [J]. 航空学报, 2017, 38(9): 421209-1-9. [28] 张强, 蒋睿嵩*, 汪文虎, 赵德中. 航空发动机涡轮叶片测量评估的多样本融合方法 [J]. 铸造技术, 2017, 38(4): 974-977. [29] Qichao Jin, Wenhu Wang, Wenyi Yan, Ruisong Jiang*. Springback and forward slip compensation in designing roller cavity surfaces for net-shape rolling compressor blades [J]. Materials and Manufacturing Processes, 2017, 32(12): 1442-1449. [30] Nan Wang, Wenhu Wang, Ruisong Jiang*, Kang Cui, Xukang Cao. Ceramic core shifting monitoring through clamping rods optimization for wax pattern of turbine blade [J]. International Journal of Advanced Manufacturing Technology, 2017, 91(5-8): 2193-2204. [31] 靳淇超, 汪文虎, 蒋睿嵩*, 赵德中, 崔康, 熊一峰. 压气机叶片辊轧模具型腔前滑补偿方法 [J]. 航空学报, 2017, 38(1): 420173-1-10. [32] 曹旭康, 汪文虎, 蒋睿嵩*, 王楠. 圆形多组件装填布局的优化求解方法 [J]. 计算机集成制造系统, 2017, 23(1): 17-24. [33] Rui-song Jiang*, Ding-hua Zhang, Kun Bu, Wen-hu Wang, Jia-wei Tian. A deformation compensation method for wax pattern die of turbine blade [J]. International Journal of Advanced Manufacturing Technology, 2017, 88(9-12): 3195-3203. [34] Kunyang Lin, Wenhu Wang, Ruisong Jiang*, Yifeng Xiong, Guodong Song. Grindability and surface integrity of in situ TiB2 particle reinforced aluminum matrix composites [J]. International Journal of Advanced Manufacturing Technology, 2017, 88(1): 887-898.