近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. Zongping Wang, Ming Yin*, Dengying Ou, Luofeng Xie, Haohao Liu, Guofu Yin; Optical Measurement Method for Blade Profiles Based on Blade Self-features, IEEE Transactions on Industrial Electronics, DOI 10.1109/TIE.2021.3062213.
2. Weifeng Jiang, Ming Yin*, Qihao Liao, Luofeng Xie, Guofu Yin. Three-dimensional single-phase elastic metamaterial for low-frequency and broadband vibration mitigation. International Journal of Mechanical Sciences, 2021, 190, 106023.
3. Ming Yin*, Luofeng Xie, Weifeng Jiang, Guofu Yin. Design and fabrication of the integrated micro/macrostructure for 3D functional gradient systems based on additive manufacturing, Optics Communication, 2018,414,195–201.
4. Luofeng Xie, Ming Yin*, Ling Wang, Feng Tan, Guofu Yin. Matrix regression preserving projections for robust feature extraction, Knowledge-Based Systems, 161, 35-46(2018).
5. Luofeng Xie, Ming Yin*, Xiangyun Yin, Yun Liu, Guofu Yin. Low-rank sparse preserving projections for dimensionality reduction, IEEE Transactions on Image Processing, 27 (11), 5261-5274(2018).
6. Zhaowei Xiang, Ming Yin*, Guanhua Dong, et al. Modeling of the thermal physical process and study on the reliability of linear energy density for selective laser melting, Results in Physics, 2018.06(9):939-946.
7. Feng Tan, Ming Yin*, Lin Wang, et al. Spindle thermal error robust modeling using LASSO and LS-SVM, Int J Adv Manuf Technol, 2018 (94) : 2861–2874.
8. Xiang, Zhaowei, Yin, Ming* ,Deng, Zhenbo, et al. Simulation of Forming Process of Powder Bed for Additive Manufacturing, Journal of Manufacturing Science and Engineering-Transactions of the Asme,2016.8.01,138(8).
9. Xie, Luofeng, Yin, Ming*, Huang, Qinyuan, et al. Internal defect inspection in magnetic tile by using acoustic resonance technology, Journal of Sound and Vibration,2016.11.24,383:108~123.
10. Luofeng Xie, Lijun Lin, Ming Yin*, Lintao Meng,Guofu Yin, A novel surface defect inspection algorithm for magnetic tile, Applied Surface Science, 2016.3.4,375 (2016) 118–126.
11. Ming Yin, Xiaoyong Tian, Lingling Wu, Dichen Li. All-dielectric three-dimensional broadband Eaton lens with large refractive index range, Appl. Phys. Lett. 104, 094101 (2014).
12. Ming Yin, Xiaoyong Tian, Lingling Wu, Dichen Li. A Broadband and omnidirectional electromagnetic wave concentrator with gradient woodpile structure, Opt. Express 21 (16), 19082 (2013).
13. Ming Yin, Xiaoyong Tian, Haoxue Han, Dichen Li. Free-space carpet-cloak based on gradient index rod-connected diamond-structured photonic crystals in metamaterial regime, Appl. Phys. Lett. 100, 124101 (2012).
14. Ming Yin, Haoxue Han, Xiaoyong Tian,and Dichen Li. Fabrication of gradient index 3D photonic crystals structure in metamaterial regime, PIERS 2012 in Kuala Lumpur, Malaysia.
15. Ming Yin, Lingling Wu, Xiaoyong Tian,and Dichen Li. A 3D electromagnetic wave concentrator realized with gradient index woodpile structure in metamaterial regime, PIERS 2013 in Stockholm, Sweden.
16. 殷鸣, 江卫锋*, 殷国富. 含共振单元的单相三维声子晶体设计及其带隙特性研究. 工程科学与技术, 2020.09, 52(05): 223-229.
17. 向召伟, 殷鸣*, 殷国富, 王玲.激光选区熔化关键工艺参数对热物理过程的影响.工程科学与技术, 2020,52(01):134-142.
18. 杨闪闪, 殷鸣*, 徐雷, 殷国富. 基于模态联合仿真寻优法的机床刀具结合部参数辨识方法. 工程科学与技术, 2019.05.
19. 殷国富, 宋俨轩, 殷鸣*, 谢罗峰, 赵秀粉. 反向式行星滚柱丝杠承载分布及寿命分析. 工程科学与技术, 2019.01.
20. 江卫锋, 殷鸣* , 向召伟, 陈海军, 殷国富. 含内部连接体的二维声子晶体弹性波宽频带隙特性, 声学学报, 2018.04/3.43:392-398
21. 江卫锋, 殷鸣*, 等. 三维金刚石晶格声子晶体超宽频带隙特性研究. 振动与冲击, 2018,37(13):190-194.
22. 谭 峰, 殷鸣*, 彭骥等. 基于集成BP神经网络的数控机床主轴热误差建模. 计算机集成制造系统, 2018.06/24:1383-1390.
23. 向召伟, 殷鸣* , 邓珍波, 梅筱琴, 殷国富. 增材制造技术粉床的数值模拟与分析. 工程科学与技术, 2016.3.20, (02):191~197.
24. 刘光辉, 殷鸣*, 尹湘云, 殷国富, 基于响应面的码垛机器人承载体多目标优化. 机械. 2020,47(06).
25. 宋陶然, 殷鸣*, 王玲, 殷国富.铣削GCr15三维热力耦合加工模型仿真.工具技术,2019,53(11):37-41.
26. 陆红红, 殷鸣*, 谢罗峰, 向枭, 殷国富. 基于面结构光的叶片三维重构技术研究.中国测试,2019,45(02):134-138.
27. 谢飞,王玲,殷鸣,谭峰,殷国富.数控机床热误差的温度测点优化方法[J].组合机床与自动化加工技术,2019(06):45-49.
28. 宋俨轩, 殷鸣*, 谢罗峰, 殷国富. 齿距制造误差对纵树形叶根静力性能的影响. 机械, 2018.12.
29. 谢飞, 殷鸣*, 谭峰, 殷国富. 数控龙门平面磨床的动静态性能分析. 机械, 2017.05.
30. 宋俨轩, 殷鸣*, 江卫锋. 基于响应面的带式输送机桁架结构截面优化. 煤矿机械, 2017.9/38:67-70.
31. 陈海军, 殷鸣*, 殷国富, 韩兴国. 三自由度悬臂式3D打印机结构设计及优化. 组合机床与自动化加工技术, 2017.4/4:70-74
32. 江卫锋, 殷鸣* , 王玲, 宋俨轩, 殷国富. 圆管带式输送机桁架结构有限元仿真与数值计算. 煤矿机械, 2016.10.15, (10):7~9.
33. 江卫锋, 殷鸣* , 殷国富, 向召伟, 邓珍波. 固/固型二维正方晶格声子晶体缺陷态研究. 应用声学, 2016.8.01, (05):410~416.
34. 邓珍波, 殷鸣*, 向召伟等. 基于结构光的叶片自动检测系统研发. 制造业自动化, 2016, (01):12-15.
35. 赵越, 殷鸣* , 黄沁元等. 基于WPT-ANN的磁瓦内部缺陷音频检测. 中国测试, 2015,(06).
36. 陈俊宇, 殷鸣*等. 燃机叶片型面三维光学扫描检测方法研究. 中国测试, 2015,(11):7-11.
37. Xiaoyong Tian, Ming Yin, Dichen Li, 3D printing: a useful tool for the fabrication of artificial electromagnetic (EM) medium. Rapid Prototyping Journal, 2016.01.01, 22(2).
38. 田小永, 殷鸣, 李涤尘, 渐变折射率人工电磁介质设计与3D打印制造. 机械工程学报, 2015.4.29, (7):124~129.
39. 田小永, 殷鸣, 李涤尘, 功能驱动的超材料结构数字化设计与3D打印. 中国科学:信息科学, 2015.2.20,(02):224~234.