近期论文
查看导师最新文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
[1] X. Dong, N. Li, Y. Zhou, H. Peng, Y. Qu, Q. Sun, H. Shi, R. Li, S. Xu, J. Yan, Grain boundary character and stress corrosion cracking behavior of Co-Cr alloy fabricated by selective laser melting, J. Mater. Sci. Technol. 93 (2021) 244–253.
[2] H. Shi, Y. Chai, N. Li, J. Yan, H. Peng, R. Zhang, M. Li, D. Bai, K. Chen, Z. Liu, M. Luo, Q. Sun, X. Zhu, Y. Zhang, R. Li, B. Zhang, X. Dong, Investigation of interfacial reaction mechanism between SiC and Inconel 625 superalloy using thermodynamic calculation, J. Eur. Ceram. Soc. 41 (2021) 3960–3969.
[3] Q. Yang, K. Sun, C. Yang, M. Sun, H. Peng, X. Shen, S. Huang, J. Chen, Compression and superelasticity behaviors of NiTi porous structures with tiny strut fabricated by selective laser melting, J. Alloys Compd. 858 (2021) 157674.
[4] Y. Nie, G. Chen, H. Peng, S. Tang, Z. Zhou, F. Pei, B. Shen, In vitro and 48 weeks in vivo performances of 3D printed porous Fe-30Mn biodegradable scaffolds, Acta Biomater. 121 (2021) 724–740.
[5]H. Peng, D. Wang, Q. Liao, Y. Wen, Degeneration and rejuvenation of shape memory effect associated with the precipitation of coherent nano-particles in a Co-Ni-Si shape memory alloy, J. Mater. Sci. Technol. 76 (2021) 150–155.
[6] L. Yong, Q. Luo, H. Peng, J. Yan, B. Xu, Y. Wen, Dependence of shape memory effect on austenitic grain sizes in thermo-mechanical treated Fe-Mn-Si-Cr-Ni shape memory alloys, Mater. Charact. 169 (2020) 110650.
[7] X. Dong, Y. Zhou, Q. Sun, Y. Qu, H. Shi, W. Liu, H. Peng, B. Zhang, S. Xu, J. Yan, N. Li, Fatigue behavior of biomedical Co–Cr–Mo–W alloy fabricated by selective laser melting, Mater. Sci. Eng. A. 795 (2020) 140000.
[8] X. Yang, Q. Liao, D. Wang, S.L. Wang, B.N. Qian, H.B. Peng, Y.H. Wen, Further improvement of shape memory effect in a Co-6.8Al-6.3W alloy through aligned precipitates, J. Alloys Compd. 846 (2020) 156383.
[9] Y. Nie, H. Peng, L. Yong, D. Wang, C. Zhang, S. Wang, Y. Wen, Improvement of shape memory effect via strengthening austenite by virtue of thermally activated process in FCC-type metastable multicomponent alloys, Mater. Sci. Eng. A. 793 (2020) 139748.
[10] W. He, Q. Luo, H. Peng, Y. Wen, Remarkable improvement of damping capacity in FeMn-based alloys by a long annealing, Mater. Sci. Technol. (2020) 1–8.
[11] P. Huang, Y. Wang, H. Peng, J. Chen, P. Wang, Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing, Fusion Eng. Des. 158 (2020) 111796.
[12]H. Peng, L. Yong, G. Wang, H. Wang, Y. Wen, Tuning δ → γ transformation types to relieve mechanical property degradation in a Co-free face-centered cubic metastable high-entropy alloy, Materialia. 11 (2020) 100738.
[13] 范新虎,廖琪,曹新迪,彭华备,文玉华, 退火对Ni47Ti44Nb9合金激光焊接接头力学性能与形状记忆效应的影响, 稀有金属材料与工程 49 (2020) 355–360.
[14] Q.C. Fan, M.Y. Sun, Y.Y. Wang, K.H. Sun, X.D. Cao, H.B. Peng, S.K. Huang, Y.H. Zhang, and Y.H. Wen, Phase Transformation and Recovery Stress of Ni47Ti44Nb9 Alloy During Constrained Heating and Cooling, Metall. Mater. Trans. A 51 (2020) 390–399.
[15] W. Huang, Y. Wang, H. Peng, Y. Wen, Effect of up-quenching time on damping capacity in a ductile Cu-16.59Al-10.55Mn shape memory alloy, Mater. Res. Express. 6 (2019) 095703.
[16] G. Wang, H. Peng, L. Xiang, J. Feng, Y. Wen, Phenomenological Equations for Predicting γ + δ Two-Phase Region of Fe-Mn-Si-Cr-Ni Shape Memory Alloys, Metall. Mater. Trans. A. 50 (2019) 3478–3485.
[17] D. Wang, X. Yang, Q. Liao, S.L. Wang, H.B. Peng, Y.H. Wen, Engineering twins and stacking faults of Co-Al-W shape memory alloy by a combination of casting and solution-treatment, Scr. Mater. 171 (2019) 73–77.
[18] Q.C. Fan, M.Y. Sun, Y.H. Zhang, Y.Y. Wang, Y. Zhang, H.B. Peng, K.H. Sun, X.H. Fan, S.K. Huang, Y.H. Wen, Influence of precipitation on phase transformation and mechanical properties of Ni-rich NiTiNb alloys, Mater. Charact. 154 (2019) 148–160.
[19]H. Peng, L. Yong, S. Wang, Y. Wen, Role of Annealing in Improving Shape Memory Effect of As-Cast Fe-Mn-Si-Cr-Ni Shape Memory Alloys, Metall. Mater. Trans. A 50 (2019) 3070–3079.
[20] X. Yang, D. Wang, Q. Liao, S.L. Wang, B.J. Wu, H.B. Peng, Y.H. Wen, Effect of Annealing Temperature on Annealing Twins and Shape Memory Effect in Hot-Forged Co-23.9Ni-5.6Si Alloy, Metall. Mater. Trans. A 50 (2019) 3061–3069.
[21] S. Bao, L. Zhang, H. Peng, Q. Fan, Y. Wen, Effects of heat treatment on martensitic transformation and wear resistance of as-cast 60NiTi alloy, Mater. Res. Express. 6 (2019) 086573.
[22]H. Peng, J. Hua, B. Xu, Y. Wen, Fabrication of Ferrite-Coated Magnetic Fe–Mn–Si–Cr–Ni Alloy Utilizing Selective Oxidation of Mn Element, IEEE Trans. Magn. 55 (2019) 2900307.
[23] D. Wang, X. Yang, Q. Liao, H. Peng, Y. Wen, Significant improvement of shape memory effect in Co-Ni-based alloys through Si alloying, J. Alloys Compd. 791 (2019) 501–507.
[24] J. Feng, H. Zhao, H. Peng, G. Wang, L. Zhang, Y. Wen, Enhancement of strength-ductility combination in recovery-annealed Fe-Mn-C twinning-induced plasticity steels by Si alloying Enhancement of strength-ductility combination in recovery-annealed Fe-Mn-C twinning-induced plasticity steels by Si alloy, Mater. Res. Express 5 (2018) 066556.
[25] H. Peng, J. Chen, Y. Wang, Y. Wen, Key Factors Achieving Large Recovery Strains in Polycrystalline Fe–Mn–Si-Based Shape Memory Alloys: A Review, Adv. Eng. Mater. (2018) 1700741.
[26] L. Zhang, H. Peng, Q. Qin, Q. Fan, S. Bao, Y. Wen, Effects of annealing on hardness and corrosion resistance of 60NiTi film deposited by magnetron sputtering, J. Alloys Compd. 746 (2018) 45–53.
[27] B. Qian, H. Peng, Y. Wen, A novel sandwich Fe-Mn damping alloy with ferrite shell prepared by vacuum annealing, Smart Mater. Struct. 27 (2018) 045005.
[28] X. Yang, B.N. Qian, H.B. Peng, B.J. Wu, Y.H. Wen, Effect of W Contents on Martensitic Transformation and Shape Memory Effect in Co-Al-W Alloys, Metall. Mater. Trans. A 49 (2018) 1044–1052.
[29] Q. Qin, H. Peng, Q. Fan, L. Zhang, Y. Wen, Effect of second phase precipitation on martensitic transformation and hardness in highly Ni-rich NiTi alloys, J. Alloys Compd. 739 (2018) 873–881.
[30] H. Peng, G. Wang, S. Wang, J. Chen, I. MacLaren, Y. Wen, Key criterion for achieving giant recovery strains in polycrystalline Fe-Mn-Si based shape memory alloys, Mater. Sci. Eng. A 712 (2018) 37–49.
[31] Y.N. Wang, J. Chen, H.B. Peng, Y.H. Wen, Shape Memory Effect Induced by Stress-induced α′ Martensite in a Metastable Fe–Cr–Ni Austenitic Stainless Steel, Acta Metall. Sin. (English Lett.) 30 (2017) 513–520.
[32] H. Peng, P.A.N. Huang, T. Zhou, S. Wang, Reverse Shape Memory Effect Related to α → γ Transformation in a Fe-Mn-Al-Ni Shape Memory Alloy, Metall. Mater. Trans. A 48 (2017) 2132–2139.
[33] B.J. Wu, X. Yang, H.B. Peng, Y.H. Wen, Role of thermal martensite in shape memory effect of CoAl and CoNi alloys, Trans. Nonferrous Met. Soc. China. 27 (2017) 382–389.
[34] X. Yang, B.J. Wu, H.B. Peng, Y.H. Wen, Shape recovery increase in a Co-Al-W alloy realized by stress-induced hcp martensitic transformation after strengthening matrix, J. Alloys Compd. 695 (2017) 1045–1051.
[35] J. Chen, H.B. Peng, Q. Yang, S.L. Wang, F. Song, Y.H. Wen, Effect of carbon content on shape memory effect of Fe-Mn-Si-Cr-Ni-based alloys at different deformation temperatures, Mater. Sci. Eng. A 677 (2016) 133–139.
[36] J. Chen, J.W. Sun, Q. Yang, H.B. Peng, S.L. Wang, Y.H. Wen, Thermodynamic Explanation for the Large Difference in Improving Shape Memory Effect of Fe-Mn Alloys by Co and Si Addition, Adv. Eng. Mater. 18 (2016) 1426–1433.
[37] Q. Yang, S.L. Wang, J. Chen, T.N. Zhou, H.B. Peng, Y.H. Wen, Strong heating rate-dependent deterioration of shape memory effect in up/step quenched Cu-based alloys: A ductile CuAlMn alloy as an example, Acta Mater. 111 (2016) 348–356.
[38] H.B. Peng, G.X. Wang, Y.Y. Du, S.L. Wang, J. Chen, Y.H. Wen, A novel training-free processed Fe-Mn-Si-Cr-Ni shape memory alloy undergoing δ → γ phase transformation, Metall. Mater. Trans. A 47 (2016) 3277–3283.
[39] P. Huang, H. Peng, S. Wang, T. Zhou, Y. Wen, Relationship between martensitic reversibility and different nano-phases in a FeMnAlNi shape memory alloy, Mater. Charact. 118 (2016) 22–28.
[40] G.X. Wang, H.B. Peng, C.Y. Zhang, S.L. Wang, Y.H. Wen, Relationship among grain size, annealing twins and shape memory effect in Fe-Mn-Si based shape memory alloys, Smart Mater. Struct. 25 (2016) 075013.
[41] G.X. Wang, H.B. Peng, P.P. Sun, S.L. Wang, Y.H. Wen, Effect of titanium addition on shape memory effect and recovery stress of training-free cast Fe-Mn-Si-Cr-Ni shape memory alloys, Mater. Sci. Eng. A 657 (2016) 339–346.
[42] 宋帆, 张成燕, 王珊玲, 彭华备, 文玉华, 变形温度对固溶态Fe-Mn-Si基合金形状记忆效应的影响, 材料热处理学报. 36 (2015) 1–6.
[43] R.L. Xiong, H.B. Peng, S.L. Wang, H.T. Si, Y.H. Wen, Effect of stacking fault energy on work hardening behaviors in Fe-Mn-Si-C high manganese steels by varying silicon and carbon contents, Mater. Des. 85 (2015) 707–714.
[44] Y. Wen, H. Xiao, H. Peng, N. Li, D. Raabe, Relationship Between Damping Capacity and Variations of Vacancies Concentration and Segregation of Carbon Atom in an Fe-Mn Alloy, Metall. Mater. Trans. A 46 (2015) 4828–4833.
[45] J.W. Sun, S.L. Wang, Z.W. Yan, H.B. Peng, Y.H. Wen, Origin of shape memory effect in Co–Ni alloys undergoing fcc⇌hcp martensitic transformation, Mater. Sci. Eng. A 639 (2015) 456–464.
[46] J. Chen, H. Peng, S. Wang, Y. Du, Y. Wen, Remarkable Improvement of Shape Memory Effect in Austenitic Stainless Steel by Thermo-Mechanical Training, Adv. Eng. Mater. 17 (2015) 330–333.
[47] J. Sun, S. Wang, Z. Yan, H. Peng, Y. Wen, Remarkable Improvement of Shape-Memory Effect in a Co-31Ni-3Si Alloy by Ausforming, Metall. Mater. Trans. A 46 (2015) 1550–1555.
[48] R. Xiong, S. Wang, H. Peng, H. Si, Y. Wen, Occurrence Sequence of Deformation-Induced ε-Martensite and Mechanical Twinning in an Fe-17Mn-3Si-0.6C High Manganese Steel, Steel Res. Int. 86 (2015) 1252–1259.
[49] C.Y. Zhang, F. Song, S.L. Wang, H.B. Peng, Y.H. Wen, Effect mechanism of Mn contents on shape memory of Fe-Mn-Si-Cr-Ni alloys, Acta Metall. Sin. 51 (2015) 201–208.
[50] K. Zhao, H. Peng, X. Yang, G. Wang, Y. Wen, Improvement of Oxidation Resistance of Remelted Zone in an Al2O3-Forming Austenitic Stainless Steel by Annealing, Oxid. Met. 83 (2015) 273–290.
[51] H.B. Peng, F. Song, S.L. Wang, C.Y. Zhang, Y.H. Wen, Role of carbon in improving the shape memory effect of Fe-Mn-Si-Cr-Ni alloys by thermo-mechanical treatments, Smart Mater. Struct. 24 (2015) 055010.
[52] H.B. Peng, J. Chen, S.L. Wang, Y.H. Wen, Effect of carbon addition on recovery behavior of trained Fe-Mn-Si based shape memory alloys, Adv. Eng. Mater. 17 (2015) 205–210.
[53] Y.H. Wen, H.B. Peng, H.T. Si, R.L. Xiong, D. Raabe, A novel high manganese austenitic steel with higher work hardening capacity and much lower impact deformation than Hadfield manganese steel, Mater. Des. 55 (2014) 798–804.
[54] R. Xiong, H. Peng, H. Si, W. Zhang, Y. Wen, Thermodynamic calculation of stacking fault energy of the Fe-Mn-Si-C high manganese steels, Mater. Sci. Eng. A 598 (2014) 376–386.
[55] Y.Y. Du, H.B. Peng, J. Chen, Y.H. Wen, S.L. Wang, Microstructures of cast Fe-Mn-Si-Cr-Ni shape memory alloys characterized by metallography, Pract. Metallogr. 51 (2014) 107–126.
[56] S. Wang, Q. Yang, X. Li, H. Peng, Y. Wen, Influence of recovery heating rate on shape memory effect in up-quenched Cu–Al–Mn alloy, Trans. Nonferrous Met. Soc. China. 24 (2014) 3196–3200.
[57] Z.W. Yan, S.L. Wang, J.W. Sun, H.B. Peng, Y.H. Wen, Remarkable improvement of shape memory effect in a Co–31Ni–3Si alloy by training treatment, Mater. Sci. Eng. A 618 (2014) 41–45.
[58] H. Peng, D. Yu, X. Zhang, S. Wang, Y. Wen, Fabrication of hollow nickel micro-spheres with high degree of hollowness by silicon powder-mixed spark erosion, Int. J. Mach. Tools Manuf. 85 (2014) 131–134.
[59] Y.H. Wen, H.B. Peng, D. Raabe, I. Gutierrez-Urrutia, J. Chen, Y.Y. Du, Large recovery strain in Fe-Mn-Si-based shape memory steels obtained by engineering annealing twin boundaries, Nat. Commun. 5 (2014) 4964.
[60] H.B. Peng, Y.H. Wen, Y.Y. Du, J. Chen, Q. Yang, A new set of Creq and Nieq equations for predicting solidification modes of cast austenitic Fe-Mn-Si-Cr-Ni shape memory alloys, Metall. Mater. Trans. B 45 (2014) 6–11.
[61] Q. Yang, Q. Yu, H. Peng, Y. Wen, Effects of thermally induced cyclic γ ↔ ε transformation on shape memory effect of a quenched FeMnSiCrNi alloy, Adv. Eng. Mater. 15 (2013) 697–703.
[62] R. Ma, H. Peng, Y. Wen, L. Zhang, K. Zhao, Oxidation behavior of an austenitic stainless FeMnSiCrNi shape memory alloy, Corros. Sci. 66 (2013) 269–277.
[63] H.B. Peng, Y.H. Wen, Y.Y. Du, Q.X. Yu, Q. Yang, Effect of manganese on microstructures and solidification modes of cast Fe-Mn-Si-Cr-Ni shape memory alloys, Metall. Mater. Trans. B 44 (2013) 1137–1143.
[64]Huabei Peng, Yuhua Wen, Gang Liu, Chaoping Wang, Ning Li, A Role of α′ martensite introduced by thermo-mechanical treatment in improving shape memory effect of an Fe-Mn-Si-Cr-Ni alloy, Adv. Eng. Mater., 13 (2011) 388–394.
[65] 彭华备,刘刚,文玉华,孙盼盼,李宁,基于马氏体区域化形成的免训练铸造Fe-Mn-Si-Cr-Ni形状记忆合金Ⅰ.构想与实现,金属学报,46 (2010) 282–287.
[66] H.B. Peng, Y.H. Wen, B.B. Ye, N. Li, Influence of ageing after pre-deformation on shape memory effect in a FeMnSiCrNiC alloy with 13 wt.% Cr content, Mater. Sci. Eng. A 504 (2009) 36–39.
[67]H.B. Peng, Y.H. Wen, L.R. Xiong, N. Li, Influence of initial microstructures on effectiveness of training in a FeMnSiCrNi shape memory alloy, Mater. Sci. Eng. A 497 2008 61–64.