近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1) Haojiang Shi, Huabei Peng, Yidi Chai, Ning Li, Yuhua Wen, Dong Bai, Zihao Liu, Jiazhen Yan, Ruiqian Zhang, Ming Li, Kangwei Chen, Mingliang Luo, Qi Sun, Rui Li, Xin Dong, Effect of Zr addition on the interfacial reaction of the SiC joint brazed by Inconel 625 powder filler, Journal of the European Ceramic Society, 2021, 41（13）, 6238-6247
2) Xin Dong, Ning Li, Yanan Zhou, Huabei Peng, Yuntao Qu, Qi Sun, Haojiang Shi, Rui Li, Sheng Xu, Jiazhen Yan, Grain boundary character and stress corrosion cracking behavior of Co-Cr alloy fabricated by selective laser melting, Journal of Materials Science & Technology, 2021, 93：244-253
3) Haojiang Shi, Yidi Chai, Ning Li, Jiazhen Yan, Huabei Peng, Ruiqian Zhang, Ming Li, Dong Bai, Kangwei Chen, Zihao Liu, Mingliang Luo, Qi Sun, Xin Zhu, Yuxian Zhang, Rui Li, Biao Zhang, Xin Dong, Investigation of interfacial reaction mechanism between SiC and Inconel 625 superalloy using thermodynamic calculation, Journal of the European Ceramic Society, 2021, 41（7）：3960-3969.
4) Xin Dong, Yanan Zhou, Qi Sun, Yuntao Qu, Haojiang Shi, Wenbo Liu, Huabei Peng, Biao Zhang, Sheng Xu, Jiazhen Yan, Ning Li, Fatigue behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting, Materials Science & Engineering A, 2020, 795: 140000.
5) Haojiang Shi, Yidi Chai, Ning Li, Jiazhen Yan, Xin Zhu, Kangwei Chen, Dong Bai, Zihao Liu, Miaomiao Wu, Ruiqian Zhang, Ming Li, Mingliang Luo, Qi Sun, Chenglai Xin, Wenmin Hu, Xin Dong, Interfacial reaction mechanism of SiC joints joined by pure nickel foil, Journal of the European Ceramic Society, 2020, 40(15): 5162-5171.
6) Xin Dong, Qi Sun, Yanan Zhou, Yuntao Qu, Haojiang Shi, Biao Zhang, Sheng Xu, Wenbo Liu, Ning Li*, Jiazhen Yan, Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting, Corrosion Science, 2020, 170: 108688
7) Yanan Zhou, Qi Sun, Xin Dong, Ning Li, Zhijian James Shen, Yuan Zhong, Mirva Eriksson, Jiazhen Yan, Sheng Xu, Chenglai Xin, Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments, Journal of Alloys and Compounds, 2020, 840: 155664
8) Kangwei Chen, Jiazhen Yan, Ning Li, Mingliang Luo, Haojiang, Shi, Xin Zhu, Ying Liu, Xiuchen Zhao, Ran Zhang, The effect of the annealing temperature on the damping capacity under constant prestress, mechanical properties and microstructure of an Fe–11Cr-2.5Mo-0.1Zr-1.0Ni forged damping alloy, Journal of Alloys and Compounds, 2020(851) 30: 152429
9) Zhou Yanan, Li Ning, Wang Hongmei, Yan Jiazhen, Liu Wenbo, Xu, Sheng, Effects of the rare earth element lanthanum on the metal-ceramic bond strength of dental casting Co-Cr alloys, JOURNAL OF PROSTHETIC DENTISTRY, 2019(121)5: 848-857
10) Liu Wenbo, Chen Xue, Xiang Peng, Zhang Shichao, Yan Jiazhen, Li Ning, Shi Sanqiang, Chemically monodisperse tin nanoparticles on monolithic 3D nanoporous copper for lithium ion battery anodes with ultralong cycle life and stable lithium storage properties, NANOSCALE, 2019(11) 11: 4885-4894
11) Liu Wenbo, Chen Long, Cui Liu, Yan Jiazhen, Zhang Shichao, Shi Sanqiang, Freestanding 3D nanoporous Cu@1D Cu2O nanowire heterostructures: from a facile one-step protocol to robust application in Li storage, JOURNAL OF MATERIALS CHEMISTRY A, 2019(7) 25 : 15089-15100, IF10.733
12) Yan Shanghua, Li Ning, Wangjun, Yan Jiazhen, Liu Wenbo, Li Dong, Mou Xiaoxiao, Liu Ying, Zhao Xiuchen, Effect of minor Zr element on microstructure and properties of Fe-16Cr-2.5Mo damping alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 2018,740: 587-594，IF3.779
13) Xin Chenglai, Li Ning, Yan Jiazhen, Cao Yongtong, Effects of Ti Activity on Mechanical Properties and Microstructures of Al2O3/Ag-Cu-Ti/Fe-Ni-Co Brazed Joints, RARE METAL MATERIALS AND ENGINEERING, 2018,47(4):1031-1036，IF0.29
14) Zhou Yanan, Li Ning, Yan Jiazhen, Zeng Qiang, Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods, JOURNAL OF PROSTHETIC DENTISTRY, 2018,120(4):617-623，IF2.34
15) Wei Wei, Zhou, Zhou Yanan, Liu Wenbo, Li Ning, Yan Jiazhen, Li Haopeng, Microstructural Characterization, Mechanical Properties, and Corrosion Resistance of Dental Co-Cr-Mo-W Alloys Manufactured by Selective Laser Melting, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27(10): 5312-5320
16) Dong Xin, Liu Wenbo, Chen Xue, Yan Jiazhen, Li Ning, Shi Sanqiang, Zhang Shichao, Yang Xusheng, Novel three dimensional hierarchical porous Sn-Ni alloys as anode for lithium ion batteries with long cycle life by pulse electrodeposition, CHEMICAL ENGINEERING JOURNAL, 2018,350:791-798
17) Li Dong, Liu Wenbo Li Ning, Zhong Zhenyu, Yan Jiazhen, Shi Sanqiang, An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature, Journal of visualized experiments : JoVE, 2018,139:
18) Liu Wenbo, Cheng Peng, Yan Jiazhen, Li Ning, Shi Sanqiang, Zhang Shichao, Temperature-induced surface reconstruction and interface structure evolution on ligament of nanoporous copper, SCIENTIFIC REPORTS, 2018,8: 447
19) 周亚男, 魏维, 颜家振, 李宁, 许胜, 张幖, 激光选区熔覆牙科用钴铬钼合金的金瓷结合性研究, 工程科学与技术，2018,50（2）：220-225
20) Li Dong, Liu Wenbo（通讯作者）, Li Ning, Yan Jiazhen, Shi Sanqiang, Remarkable Improvement of Damping Capacity of Mn-20Cu-5Ni-2Fe (at%) Alloy by Zinc Element Addition, ADVANCED ENGINEERING MATERIALS, 2017,19(12):1700437
21) Liu Wenbo, Xin Chenglai, Chen Long, Yan Jiazhen, Li Ning, Shi Sanqiang, Zhang Shichao, A facile one-pot dealloying strategy to synthesize monolithic asymmetry-patterned nanoporous copper ribbons with tunable microstructure and nanoporosity, RSC ADVANCES，6(4): 2662-2670, 2016
22) Yang Shizhou，Li Ning，Li Hui, Effects of Electric Pulse Treatment on Shape Memory Effect and Microstructure in a Pre-deformation Fe13Mn6Si13Cr4NiO.1C Alloy, RARE METAL MATERIALS AND ENGINEERING, 45(1):51-55, 2016
23) Cao Yongtong，Yan Jiazhen，Li Ning，Zheng Yi，Xin Chenglai, Effects of brazing temperature on microstructure and mechanical performance of Al2O3/AgCuTi/Fe-Ni-Co brazed joints, JOURNAL OF ALLOYS AND COMPOUNDS, 650: 30-36, 2015
24) Mou Xiaoxiao，Li Ning，Yan Jiazhen, Investigation of constant prestress in effecting damping capacity of Fe-15Cr-2.5Mo-1.0Ni casting ferromagnetic alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 650: 92-96, 2015
25) Wen Yuhua，Xiao Hongxing，Peng Huabei，Li Ning，Raabe Dierk, Relationship Between Damping Capacity and Variations of Vacancies Concentration and Segregation of Carbon Atom in an Fe-Mn Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A, 46(11): 4828-4833, 2015
26) Yan Jiazhen，Li Ning，Fu Xu，Liu Wenbo，Liu Ying，Zhao Xiuchen, Effect of Pre-Deformation and Subsequent Aging on the Damping Capacity of Mn-20 at.%Cu-5 at.%Ni-2 at.%Fe alloy, ADVANCED ENGINEERING MATERIALS, 17(9): 1332-1337, 2015
27) Liu Wenbo，Chen Long，Yan Jiazhen，Li Ning，Shi Sanqiang，Zhang Shichao, Nanoporous copper from dual-phase alloy families and its technology application in lithium ion batteries, CORROSION REVIEWS, 33(5): 203-231, 2015
28) Liu Wenbo，Chen Long，Yan Jiazhen，Li Ning，Shi Sanqiang，Zhang Shichao, Dealloying solution dependence of fabrication, microstructure and porosity of hierarchical structured nanoporous copper ribbons, CORROSION SCIENCE, 94:114-121, 2015
29) Wu Zhikai，Li Ning，Yan Jiazhen，Zhao Wanqian, Effect of Al2O3 Coating on Densification and Aging Sensibility of 3Y-TZP Ceramics, RARE METAL MATERIALS AND ENGINEERING, 44(4): 808-812, 2015
30) Yan Jiazhen, Li Ning, Fu Xu, Zhang Ying, The strengthening effect of spinodal decomposition and twinning structure in MnCu-based alloy, Materials Science and Engineering: A, 2014, 618: 205-209.
31) Shang Jianli，Yan Jiazhen，Li Ning, Brazing W and Fe-Ni-Co alloy using Ag-28Cu and Ag-27Cu-3.5Ti fillers, JOURNAL OF ALLOYS AND COMPOUNDS, 611: 91-95, 2014
32) Zhao Wanqian，Li Ning，Wu Zhikai，Yan Jiazhen, Effect of Sintering Temperatures on the Translucency of Dental 3Y-TZP Ceramic, RARE METAL MATERIALS AND ENGINEERINGVL, 43:46-49, 2014
33) Wu Zhi-kai，Li Ning，Jian Chao，Zhao Wan-qian，Yan, Jia-zhen, Low temperature degradation of Al2O3-doped 3Y-TZP sintered at various temperatures, CERAMICS INTERNATIONAL, 39(6): 7199-7204, 2013
34) Liu Wenbo，Zhang Shichao，Li Ning，An Shenshen，Zheng Jiwei, Preparation and Characterization of Novel Sandwich-Typed Three-Dimensional Bimodal Nanoporous Copper-Supported Tin Thin-Film Anode for Lithium Ion Battery, INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 8(3): 3928-3938, 2013
35) Yang Shizhou，Li Ning，Wen Yuhua，Peng Huabei, Effects of Ageing with Electric Pulse Treatment on Shape Memory Effect and Precipitation of Cr23C6 Carbide in a Pre-deformed Fe-Mn-Si-Cr-Ni-C Alloy, RARE METAL MATERIALS AND ENGINEERING, 42(2): 238-242, 2013
36) Wu Zhikai，Li Ning，Wen Yuhua, Effect of a small amount of Al2O3 addition on the hydrothermal degradation of 3Y-TZP, JOURNAL OF MATERIALS SCIENCE, 48(3): 1256-1261, 2013
37) Huang Shuke，Huang Wenrong，Liu Jianhui，Teng Jin，Li Ning，Wen Yuhua, Internal friction mechanism of Fe-19Mn alloy at low and high strain amplitude, MATERIALS SCIENCE AND ENGINEERING A , 560:837-840, 2012
38) Liu Wenbo，Zhang Shichao，Li Ning，An Shenshen，Zheng Jiwei, Formation of Monolithic Nanoporous Copper with Ultrahigh Specific Surface Area through Chemical Dealloying of Mg-Cu Alloy, INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 7(10):9707-9716,2012
39) Liu Wen-bo，Li Ning，Wen Yu-hua，Zhang Shi-chao，Yang Shi-zhou, Effects of amount of pre-deformation on precipitation of NbC particles and shape memory effect of Fe17Mn5Si8Cr5Ni0.5NbC alloy during electropulsing treatment, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 22(S1):93-97, 2012
40) Liu Wenbo，Zhang Shichao，Li Ning，Zheng Jiwei，An Shenshen，Li Guangxing, Influence of Dealloying Solution on the Microstructure of Monolithic Nanoporous Copper through Chemical Dealloying of Al 30 at.% Cu Alloy, INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 7(9): 7993-8006, 2012
京公网安备 11010802027423号