个人简介
工作经历
2010.07-2013.12:南京理工大学,机械工程学院,讲师、硕士生导师
2013.12-2014.12:美国、爱荷华州立大学,机械工程系,博士后(国家公派)
2014.01-至今:南京理工大学,机械工程学院,副教授、硕士生导师
教育经历
2001.09-2005.06:南京理工大学,机械工程专业,本科生,获学士学位
2005.09-2010.06:南京理工大学,车辆工程专业,研究生,获博士学位
研究领域
1.车辆先进动力技术;2.氢燃料发动机技术;
3.汽车电子控制技术;4.直线电机与电磁直驱技术;
欢迎车辆工程及机械工程类学生报考!
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
作为第一作者或通信作者发表的学术论文:
[1] Houliang Yu, Zhaoping Xu, Qinglin Zhang, Liang Liu. Two-Stroke Thermodynamic Cycle Optimization of a Single-Cylinder Free-Piston Engine Generator. Advances in Materials Science and Engineering, Volume 2019 (SCI, EI)
[2] Lijie Yang, Zhaoping Xu, Liang Liu. A Tubular PM Linear Generator with a Coreless Moving-Coil for Free-piston Engines. IEEE Transactions on Energy Conversion, 2019 (SCI, EI)
[3] Lingling Zhang, Liang Liu, Xiangbin Zhu, Zhaoping Xu. An Electric Load Simulator for Engine Camless Valvetrains. Applied Sciences, 2019(9) (SCI, EI)
[4] Hao Yan, Zhaoping Xu. Friction Characteristics of Synchronization Process Based on Tribo-Thermodynamics. Advances in Materials Science and Engineering, Volume 2018 (SCI, EI)
[5] Haicheng Zhou, Zhaoping Xu, Liang Liu. A Rule-Based Energy Management Strategy Based on Dynamic Programming for Hydraulic Hybrid Vehicles, Mathematical Problems in Engineering, Volume 2018 (SCI, EI)
[6] Dong Liu, Zhaoping Xu, Liang Liu. Modeling and Control of a Portable Two-Stroke Free-Piston Engine Generator. ICMA2018, 2018 (EI)
[7] Haicheng Zhou, Zhaoping Xu, Liang Liu. Modelling and Control of a Novel Hydraulic Hybrid Vehicle with Wheel Motors. ICMA2018, 2018 (EI)
[8] Nianpeng Liu, Zhaoping Xu, Liang Liu. Simulation and Prototype Experiment Research of a Four Stroke Free Piston Engine. ASEMD2018
[9] 刘念鹏, 徐照平, 刘梁. 四冲程自由活塞内燃发电机样机设计与试验研究. 小型内燃机与车辆技术, 47(2), 2018
[10] 华儒, 徐照平, 刘梁. 自由活塞发动机二冲程运行模式换气过程优化优化. 车用发动机, 47(2), 2018
[11] Hao Yan, Dengqiang Wang, Zhaoping Xu. Design of an opposed-piston four-stroke free-piston engine generator. SAE Paper, 2015. (EI: 20153201106045)
[12] 林继铭, 徐照平, 闫皓. 自由活塞发动机的活塞运动规律优化与试验, 农 业工程学报, 31(6), 2015. (EI: 20151700790306)
[13] 尹林霞, 徐照平, 常思勤. 四冲程自由活塞天然气发动机原理样机的试验研究与分析, 内燃机工程, 2014, 35(1) (EI: 20141117464491)
[14] Ningxia Yin, Zhaoping Xu, Siqin Chang. Effect of Piston Motion on Combustion of CNG Free Piston Engine, Advanced Materials Research, 2014 (EI: 20141117443327)
[15] Jiming Lin, Zhaoping Xu, Siqin Chang. Thermodynamic simulation and prototype testing of a four-stroke free-piston engine. Journal of Engineering for Gas Turbines and Power, 2014, 136(5) (SCI: 000333041400006)
[16] Jiming Lin, Zhaoping Xu, Siqin Chang. Finite-time thermodynamic modeling and analysis of an irreversible Miller cycle working on a four-stroke engine. International Communications in Heat and Mass Transfer, 2014, 54: 54-59. (SCI: 000336357400008)
[17] 徐照平, 常思勤, 林继铭. 四冲程自由活塞发电机活塞运动控制方法. 农业机械学报, 2013, 44(1): 6~10 (EI: 20130616000170)
[18] Zhaoping Xu, Siqin Chang, Jiming Lin. Development of a single-cylinder four-stroke free-piston generator. Advanced Materials Research, 2013, 772: 436~442 (EI: 20134116835095)
[19] Zhaoping Xu, Siqin Chang. Simulation of an opposed-piston four-stroke free-piston generator. Applied Mechanics and Materials, 2013, 336: 585~589 (EI: 20133516681468)
[20] 徐照平, 常思勤, 林继铭.四冲程自由活塞发动机样机设计. 南京理工大学学报自然科学版, 2013, 37(5)
[21] 林继铭, 徐照平,常思勤. 新型独立压缩自由活塞发动机仿真研究. 南京理工大学学报,2013,37(1) : 101-106.
[22] Ling Huang, Zhaoping Xu. An Opposed-piston Free-piston Linear Generator Development for HEV. SAE Paper, 2012-01-1021
[23] 徐照平, 常思勤, 黄玲. 四冲程自由活塞发动机仿真与实验. 农业机械学报, 2012, 43(7)
[24] Zhaoping Xu, Siqin Chang. Prototype testing and analysis of a novel internal combustion linear generator integrated power system. Applied Energy, August, 2010, 87(4): 1342~1348 (SCI: 000274506500029)
[25] Zhaoping Xu, Siqin Chang. Improved Moving Coil Electric Machine for Internal Combustion Linear Generator. IEEE Transactions on Energy Conversion, June, 2010, 25(2): 281~286 (SCI: 000278063800002)
[26] Zhaoping Xu, Siqin Chang. Development and Performance Evaluation of a Novel Internal Combustion Linear Generator Integrated Power System. World Automotive Congress, Hungary, 2010
[27] 徐照平, 常思勤. 新型动圈式永磁直线电机样机设计及试验. 电机与控制应用, 2010, (1): 89~91
学术兼职
江苏省汽车工程学会会员;
国家自然科学基金同行评议专家;