孙宇 - 南京理工大学 - 机械工程学院

个人简介

工作经历 2001/3-至今，南京理工大学，南京理工大学，教授 1995/3-2001/3，南京理工大学，南京理工大学，副教授 1990/12-1995/3，南京理工大学，机械工程学院，讲师 1988/2-1990/12，南京理工大学，机械工程学院，助教教育经历 1993/9-1996/9，南京理工大学，火炮与自动武器，博士 1985/9-1988/6，华东工学院(现为南京理工大学)，机械制造及自动化，硕士 1981/9-1985/6，哈尔滨工业大学，电器（信息处理与模式识别），学士

研究领域

1、数控精密高效成形技术与装备 2、制造系统信息化与智能化 3、制造系统检测、控制、诊断与维护技术 4、农副产品精深加工技术与装备（饲料机械、速冻机组）

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

先后承担国家“863”、国家科技重大专项、国防预研、省部级科技攻关及企业委托项目百余项。近年来，承担国家科技重大专项“高档数控机床与基础制造装备”五项，国家科技部国际合作项目“生物燃料高效利用技术与装备”以及国家星火计划重点项目“绿色清洁化饲料生产成套装备与产业化示范”等，并取得了一批成果。近年来，以第一作者或通讯作者在国内外期刊及会议上发表学术论文100余篇，其中被SCI收录20余篇，EI收录30余篇，编写教材著作5部，授权发明专利20余项。近几年主要论文和论著如下： 1、Wu X, Sun Y, Wang Y, Chen Y. Dynamic analysis of the double crank mechanism with a 3D translational clearance joint employing a variable stiffness contact force model [J]. Nonlinear Dynamics, 2020, 99(3): 1937-1958. 2、Jia H, Wu K, Wang Y, Sun Y. Conveyor belt structure of belt dryer: Analysis and optimization [J]. Engineering Failure Analysis, 2020, 115: 104686. 3、Wang Y, Sun Y, Wu K. Research on the mechanical behavior of the biomass densification process based on a thick walled cylinder [J]. Bioresources, 2020, 15(3): 4932-4946. 4、Wang Y, Sun Y, Wu K. Methods to determine the interactions between the biomass and the pellet channel during biomass pelletizing process [J]. Waste and Biomass Valorization, 2020, 11(8): 4469-4480. 5、Yang D, Sun Y, Wu K. Research on CEEMD-AGA denoising method and its application in feed mixer [J]. Mathematical Problems in Engineering, 2020, 2020: 9873268. 6、Yang D, Sun Y, Wu K. Assembly reliability modelling technology using function decomposing and LSSVM [J]. International Journal of Simulation Modelling, 2020, 19(2): 334-345. 7、Liu X, Liu C, Zhao F, Sun Y. Multi-phase material topology optimization method based on alternative sensitivity calculation [J]. Journal of Environmental Protection and Ecology, 2019, 20(2): 793–801. 8、Wang Y, Sun Y, Wu K. Effects of waste engine oil additive on the pelletizing and pyrolysis properties of wheat Straw [J]. Bioresources, 2019, 14(1): 537-553. 9、Wang Y, Wu K, Sun Y. Effects of raw material particle size on the briquetting process of rice straw [J]. Journal of the Energy Institute, 2018, 91(1):153-162. 10、Liu X, Liu C, Sun Y, Xu X. Research on optimization of layered orientation of gravity center in 3D printing [J]. Journal of Environmental Protection and Ecology, 2018, 19(4): 1805-1812. 11、Chen C, Sun Y, Ni J. Optimization of flexible fixture layout using N-M principle [J]. International Journal of Advanced Manufacturing Technology, 2018, 96: 4303-4311. 12、Chen Y, Sun Y, Yang D. Investigations on dynamic characteristics of a planar slider-crank mechanism for a high-speed press system that considers joint clearance [J]. Journal of Mechanical Science and Technology, 2017, 31(1):75-85. 13、Chen H, Sun Y. Development and application of reliability test platform for high-speed punch machine clutch brake system [J]. Journal of Mechanical Science & Technology, 2017, 31(1):53-61. 14、Chen Y, Sun Y, Cao C. Investigations on influence of groove shapes for the journal bearing in high speed and heavy load press system [J]. Industrial Lubrication & Tribology, 2017(10):230-240. 15、Wang Y, Wu K, Sun Y. Pelletizing properties of wheat straw blending with rice straw [J]. Energy & Fuels, 2017, 31(5): 5126-5134 16、Chen Y, Sun Y, Chen C. Dynamic analysis of a planar slider-crank mechanism with clearance for a high speed and heavy load press system [J]. Mechanism & Machine Theory, 2016, 98:81-100. 17、Li Y, Sun Y, Peng B, et al. Dynamic modeling of a high-speed over-constrained press machine [J]. Journal of Mechanical Science & Technology, 2016, 30(7):3051-3059. 18、Hu F, Sun Y, Peng B. Elastic dynamic research of high-speed multi-link precision press considering structural stiffness of rotation joints [J]. Journal of Mechanical Science & Technology, 2016, 30(10):4657-4667. 19、Xia X, Sun Y, Wu K, et al. Optimization of a straw ring-die briquetting process combined analytic hierarchy process and grey correlation analysis method [J]. Fuel Processing Technology, 2016, 152:303-309. 20、Chen Y, Sun Y, Peng B, et al. A comparative study of joint clearance effects on dynamic behavior of planar multibody mechanical systems [J]. Lat.am.j.solids Struct, 2016, 13(15):2515-2533. 21、Hu F, Sun Y, Peng B. Dynamic precision analysis and experimental verification of high-speed precision punch press [J]. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 2016, 230(20): 3655-3662. 22、Xia X, Sun Y, Wu K, et al. Modeling of a straw ring-die briquetting process [J]. Bioresources, 2014, 9(4):6316-6328. 23、王尚斌, 孙宇, 彭斌彬. 曲柄滑块机构转速波动与动态静力综合分析[J]. 华中科技大学学报:自然科学版, 2014(1):28-34. 24、夏先飞, 孙宇, 武凯,等. 秸秆压块机组合环模的磨损机理[J]. 农业工程学报, 2014, 30(4):32-39. 25、陈浩, 孙宇, 王栓虎. 高速冲床传动系统性能退化分析与可靠性评估[J]. 华中科技大学学报(自然科学版), 2015(11):45-50. 26、李烨健, 孙宇, 胡峰峰,等. 高速机械压力机综合动平衡优化研究[J]. 华中科技大学学报(自然科学版), 2016, 44(6):24-28. 出版专著和教材 1、《柔性制造检测监控技术》孙宇、张世琪等编著，兵器工业出版社，2000.6 2、《现代制造导论》张世琪、孙宇等编著，兵器工业出版社，2000.12 3、《现代制造引论》张世琪、李迎、孙宇等编著，科学出版社，2003.9 4、《环模制粒成型技术与装备》武凯、孙宇编著，科学出版社，2013.12