近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
【1】Zaixing Wang, Junkui Mao, Zhenzong He, Fengli Liang,Energy-exergy analysis of an integrated small-scale LT-PEMFC based on steam methane reforming process,Energy Conversion and Management,Volume 246,2021,114685,ISSN 0196-8904,https://doi.org/10.1016/j.enconman.2021.114685(https://www.sciencedirect.com/science/article/pii/S019689042100861X)
【2】Zecan Tu, Chenwei Zhao, Junkui Mao, Xiao Zhao, Xingsi Han,Influence of the braided structure on the film cooling performance over the ceramic matrix composite plate,International Journal of Thermal Sciences,Volume 170,2021,107112,ISSN 1290-0729,https://doi.org/10.1016/j.ijthermalsci.2021.107112.(https://www.sciencedirect.com/science/article/pii/S129007292100274X)
【3】Chenwei Zhao, Zecan Tu, Junkui Mao, Pingting Chen, Longkai Li,The design of special woven-preformed structures for the high-performance film cooling with undamaged fibers based on 2.5D ceramic matrix composites,Composite Structures,Volume 283,2022,115114,ISSN 0263-8223,https://doi.org/10.1016/j.compstruct.2021.115114.(https://www.sciencedirect.com/science/article/pii/S0263822321015324)
【4】Song Wei, Junkui Mao, Jiaxi Yan, Xingsi Han, Zecan Tu, Ranran Tian,Experimental study on a hybrid vortex reducer system in reducing the pressure drop in a rotating cavity with radial inflow,Experimental Thermal and Fluid Science,Volume110,2020,109942,ISSN08941777,https://doi.org/10.1016/j.expthermflusci.2019.109942.(https://www.sciencedirect.com/science/article/pii/S0894177719308714)
【5】Haipeng Deng, Linan Shu, Zaixing Wang, Junkui Mao, Fengli Liang,SrTi0.1CoxFe0.9-xO3-δ Perovskites for enhanced oxygen evolution reaction activity,International Journal of Hydrogen Energy,Volume 45, Issue 24,2020,Pages 13129-13138,ISSN 0360-3199,https://doi.org/10.1016/j.ijhydene.2020.03.057.(https://www.sciencedirect.com/science/article/pii/S0360319920309654)
【6】Yi Jin, Zhongyu Cheng, Xingsi Han, Junkui Mao, Feng Jin,VLES of drag reduction for high Reynolds number flow past a square cylinder based on OpenFOAM,Ocean Engineering,Volume 190,2019,106450,ISSN 0029-8018,https://doi.org/10.1016/j.oceaneng.2019.106450.(https://www.sciencedirect.com/science/article/pii/S0029801818321413)
【7】Zhenzong He, Junkui Mao, Xingsi Han, Hao Wang,Retrieval of aerosol optical constants from angular light-scattering measurement signals using principal component analysis approach,Particuology,Volume 43,2019,Pages 210-218,ISSN 1674-2001,https://doi.org/10.1016/j.partic.2018.03.005.(https://www.sciencedirect.com/science/article/pii/S1674200118301111)
【8】Yue YANG, Junkui MAO, Feilong WANG, Xingsi HAN,Unsteady analysis of jet impingement under vibration conditions,Chinese Journal of Aeronautics,2021,ISSN 1000-9361,https://doi.org/10.1016/j.cja.2021.09.004.(https://www.sciencedirect.com/science/article/pii/S1000936121003162)
【9】Zecan Tu, Longkai Li, Junkui Mao, Chenwei Zhao, Xinyu Wu,Multi-scale simulation of temperature on braided fibers reinforced composite plate considering the fluctuations,International Journal of Heat and Mass Transfer,Volume 172,2021,121144,ISSN 0017-9310,https://doi.org/10.1016/j.ijheatmasstransfer.2021.121144.(https://www.sciencedirect.com/science/article/pii/S0017931021002477)
【10】Liang Xu, Zhenzong He, Qixuan Zhao, Junkui Mao, Yao Fu,A machine learning algorithm for retrieving the geometrical characteristic parameters of soot fractal aggregates from polarized light signal,Optik,Volume 236,2021,166473,ISSN 0030-4026,https://doi.org/10.1016/j.ijleo.2021.166473.(https://www.sciencedirect.com/science/article/pii/S0030402621002047)
【11】Zecan Tu, Junkui Mao, Xingsi Han, Zhenzong He,Experimental study of film cooling over a fiber-reinforced composite plate with anisotropic thermal conductivity,Applied Thermal Engineering,Volume 148,2019,Pages 447-456,ISSN 1359-4311,https://doi.org/10.1016/j.applthermaleng.2018.11.036.(https://www.sciencedirect.com/science/article/pii/S1359431118343151)
【12】Zhaoyang Xia, Zhongyu Cheng, Xingsi Han, Junkui Mao,VLES turbulence modelling for separated flow simulation with OpenFOAM,Journal of Wind Engineering and Industrial Aerodynamics,Volume 198,2020,104077,ISSN 0167-6105,https://doi.org/10.1016/j.jweia.2019.104077(https://www.sciencedirect.com/science/article/pii/S0167610519306786)
【13】Zhenzong He, Chuanhui Dong, Liang Xu, Junkui Mao, Zecan Tu,Application of the steady-state and unsteady-state lasers in reconstructing the geometrical characteristic parameters of soot fractal aggregates,Optik,Volume 202,2020,163720,ISSN 00304026,https://doi.org/10.1016/j.ijleo.2019.163720.(https://www.sciencedirect.com/science/article/pii/S0030402619316183)
【14】Fengli Liang, Zaixing Wang, Jaka Sunarso, Junkui Mao, Wei Zhou,Electroless deposition of Co(Mn)/Pd-decorator into Y2O3-stabilized ZrO2 scaffold as cathodes for solid oxide fuel cells,International Journal of Hydrogen Energy,Volume 43, Issue 1,2018,Pages 53-63,ISSN 0360-3199,https://doi.org/10.1016/j.ijhydene.2017.11.084.(https://www.sciencedirect.com/science/article/pii/S0360319917344646)
【15】Zaixing Wang, Ziqiong Yang, Yufei Song, Junkui Mao, Fengli Liang, Wei Zhou,Alkaline metal doped strontium cobalt ferrite perovskites as cathodes for intermediate-temperature solid oxide fuel cells,International Journal of Hydrogen Energy,Volume 43, Issue 29,2018,Pages 13420-13429,ISSN 0360-3199,https://doi.org/10.1016/j.ijhydene.2018.05.057.(https://www.sciencedirect.com/science/article/pii/S0360319918315477)
【16】Pengxiang Wan, Xingsi Han, Junkui Mao,Very Large Eddy Simulation of turbulent flow and heat transfer for single cylinder and cylindrical pin matrix,Applied Thermal Engineering,Volume 169,2020,114972,ISSN 1359-4311, https://doi.org/10.1016/j.applthermaleng.2020.114972.(https://www.sciencedirect.com/science/article/pii/S135943111935197X)
【17】Zhenzong He, Junkui Mao, Xingsi Han,Non-parametric estimation of particle size distribution from spectral extinction data with PCA approach,Powder Technology,Volume 325,2018,Pages 510-518,ISSN 0032-5910,https://doi.org/10.1016/j.powtec.2017.11.050.(https://www.sciencedirect.com/science/article/pii/S0032591017309300)
【18】Zhenzong He, Chuanhui Dong, Dong Liang, Junkui Mao,A weighted-sum-of-gray soot-fractal-aggregates model for nongray heat radiation in the high temperature gas-soot mixture,Journal of Quantitative Spectroscopy and Radiative Transfer,Volume 260,2021,107431,ISSN 0022-4073,https://doi.org/10.1016/j.jqsrt.2020.107431.(https://www.sciencedirect.com/science/article/pii/S0022407320309596)
【19】Fengli Liang, Ziqiong Yang, Haipeng Deng, Jaka Sunarso, Lili Yang, Junkui Mao,Enhancement of oxygen evolution reaction activity and durability of Ba0.5Sr0.5Co0.8Fe0.2O3-δ by CO2 thermal treatment,Journal of Materials Science & Technology,Volume 35, Issue 6,2019,Pages 1184-1191,ISSN 1005-0302,https://doi.org/10.1016/j.jmst.2019.01.005.(https://www.sciencedirect.com/science/article/pii/S1005030219300167)
【20】Linan Shu, Jaka Sunarso, Siti Salwa Hashim, Junkui Mao, Wei Zhou, Fengli Liang,Advanced perovskite anodes for solid oxide fuel cells: A review,International Journal of Hydrogen Energy,Volume 44, Issue 59,2019,Pages 31275-31304,ISSN 0360-3199,https://doi.org/10.1016/j.ijhydene.2019.09.220.(https://www.sciencedirect.com/science/article/pii/S0360319919336961)
[1]闻冉冉,王在兴,毛军逵,王任廷,梁凤丽,朱瑞涵.基于挡板结构改进的HT-PEMFC性能分析（英文）[J].Transactions of Nanjing University of Aeronautics and Astronautics,2021,38(S1):102-114.DOI:10.16356/j.1005-1120.2021.S.013.
[2]梁凤丽,闻冉冉,毛军逵,贺振宗,王任廷.PEMFC流道结构研究现状及发展趋势[J].南京航空航天大学学报,2021,53(04):477-503.DOI:10.16356/j.1005-2615.2021.04.001.
[3]叶大海,屠泽灿,李洋,毛军逵,赵陈伟.界面层及其建模方式对编织结构CMC材料导热系数影响研究[J/OL].推进技术:1-9[2022-02-26].DOI:10.13675/j.cnki.tjjs.200899.
[4]夏朝阳,宛鹏翔,韩省思,毛军逵.基于FGM的旋流预混燃烧室超大涡模拟[J].工程热物理学报,2021,42(05):1334-1341.
[5]夏朝阳,韩省思,毛军逵.基于FGM的湍流射流扩散火焰超大涡模拟[J].工程热物理学报,2021,42(02):529-533.
[6]刘志刚,方弘毅,朱瑞韩,贺振宗,毛军逵.光反射-透射测量方法在颗粒分形聚集体几何形貌重建中的应用（英文）[J].Transactions of Nanjing University of Aeronautics and Astronautics,2021,38(01):57-67.DOI:10.16356/j.1005-1120.2021.01.005.
[7]王磊,毛军逵,王龙飞,潘进,邱长波,叶大海,蔡可信.篦齿容积效应对盘腔空气系统瞬态特性的影响[J/OL].航空学报:1-16[2022-02-26].http://kns.cnki.net/kcms/detail/11.1929.V.20210115.0842.002.html.
[8]赵义祯,魏嵩,毛军逵,严佳玺,田冉冉.管式减涡器入口局部压降和流阻特性[J].航空动力学报,2021,36(01):42-52.DOI:10.13224/j.cnki.jasp.2021.01.006.
[9]周洁,宛鹏翔,韩省思,毛军逵,毕帅,蔡可信.燃烧室-涡轮耦合流动传热超大涡模拟研究[J/OL].推进技术:1-11[2022-02-26].DOI:10.13675/j.cnki.tjjs.200370.
[10]沈鑫垚,毛军逵,刘方圆,范俊,韩省思.基于PIV技术的单圆孔脉冲射流流场特征[J].航空动力学报,2020,35(09):1845-1855.DOI:10.13224/j.cnki.jasp.2020.09.006.
[11]王磊,毛军逵,邱长波,赵伟,何辉.基于蒙特卡罗法的航空发动机空气系统稳态算法优化[J].推进技术,2021,42(11):2506-2514.DOI:10.13675/j.cnki.tjjs.200159.
[12]梁栋,贺振宗,毛军逵,徐梁,付尧.散射对高温气体-碳黑颗粒混合物辐射传输的影响[J].南京航空航天大学学报,2020,52(04):588-597.DOI:10.16356/j.1005-2615.2020.04.009.
[13]赵陈伟,毛军逵,屠泽灿,邱鹏霖.纤维增韧陶瓷基复合材料热端部件的热分析方法现状和展望[J].航空学报,2021,42(06):136-161.
[14]徐启明,毛军逵,刘方圆,范俊,蔡可信,杨悦,何辉.冷却空气管供气腔脉冲射流流动响应特性实验研究[J].推进技术,2021,42(06):1351-1360.DOI:10.13675/j.cnki.tjjs.190807.
[15]胡焦英,毛军逵,贺振宗.基于神经网络识别的SOFC-GT混合系统高度特性研究[J].重庆理工大学学报(自然科学),2020,34(05):157-165.
[16]何辉,毛军逵,刘方圆,杨悦,范俊,刘兆颖,徐启明.考虑发动机性能退化的涡轮叶尖间隙预估方法研究[J].推进技术,2020,41(10):2283-2291.DOI:10.13675/j.cnki.tjjs.190680.
[17]梁栋,徐梁,贺振宗,毛军逵.基于光角度散射法的弥散介质多种辐射参数联合反演研究[J].工程热物理学报,2020,41(03):692-696.
[18]胡焦英,毛军逵,贺振宗.基于航空煤油重整的SOFC-GT混合动力系统性能[J].航空动力学报,2020,35(02):325-336.DOI:10.13224/j.cnki.jasp.2020.02.012.
[19]宛鹏翔,范俊,韩省思,毛军逵.冲击射流流动换热超大涡模拟研究[J].推进技术,2020,41(10):2237-2247.DOI:10.13675/j.cnki.tjjs.190420.
[20]吴文昌,韩省思,毛军逵.基于被动控制的D型钝体减阻大涡模拟研究[J].推进技术,2020,41(08):1692-1700.DOI:10.13675/j.cnki.tjjs.190405.
[21]田冉冉,毛军逵,范俊,魏嵩,王龙飞,屠泽灿.反旋进气混合式减涡结构流动特性数值计算[J].航空动力学报,2019,34(08):1677-1687.DOI:10.13224/j.cnki.jasp.2019.08.006.
[22]吴昕宇,赵晓,屠泽灿,毛军逵,贺振宗.2.5D编织结构复合材料温度场特征研究[J].推进技术,2019,40(11):2606-2617.DOI:10.13675/j.cnki.tjjs.180654.
[23]刘兆颖,毛军逵,夏木云,屠泽灿,梁凤丽.叶尖间隙控制系统中横流效应的试验研究[J].推进技术,2019,40(09):2030-2039.DOI:10.13675/j.cnki.tjjs.180577.
[24]伍祥瑞,毛军逵,贺振宗,梁栋.湍流乙烯扩散火焰中碳黑的数值模拟研究[J].重庆理工大学学报(自然科学),2019,33(01):89-98.
[25]张扬,毛军逵,刘远见,李睿,刘兆颖.叶尖间隙控制系统悬浮管换热单元数值研究[J].推进技术,2019,40(02):389-397.DOI:10.13675/j.cnki.tjjs.180074.
[26]贺振宗,伍祥瑞,王昊,毛军逵,韩省思.基于角度散射法的气溶胶粒子粒径分布反演研究[J].工程热物理学报,2018,39(11):2503-2506.
[27]贺振宗,梁栋,毛军逵,韩省思.Simultaneous estimation of aerosol optical constants and size distribution from angular light-scattering measurement signals[J].Chinese Physics B,2018,27(05):568-576.
[28]屠泽灿,毛军逵,赵晓.各向异性复合材料平板气膜冷却试验研究[J].工程热物理学报,2018,39(04):852-859.
[29]顾广智,毛军逵,张扬,徐逸钧,赵晓.叶尖间隙主动控制系统机匣模型试验台设计技术研究[J].重庆理工大学学报(自然科学),2018,32(03):96-104.
[30]刘远见,毛军逵,江华,李毅,沈毅,陆海鹰.高压涡轮机匣加强肋表面换热特性试验[J].航空动力学报,2017,32(11):2619-2628.DOI:10.13224/j.cnki.jasp.2017.11.008.
[31]屠泽灿,毛军逵,徐瑞,娄德仓,郭文,黄维娜.各向异性陶瓷基复合材料涡轮叶片概率性热分析方法[J].航空动力学报,2017,32(10):2427-2437.DOI:10.13224/j.cnki.jasp.2017.10.016.
[32]何康,毛军逵,夏木云,赵尊胜,邱长波.带横流非均匀冲击/气膜复合冷却特性试验研究[J].南京航空航天大学学报,2017,49(03):376-381.DOI:10.16356/j.1005-2615.2017.03.010.
[33]刘震雄,毛军逵,江华,李俊山,沈毅,陆海鹰.多层涡轮机匣内螺栓对换热特性影响的试验研究[J].推进技术,2017,38(07):1441-1449.DOI:10.13675/j.cnki.tjjs.2017.07.001.
[34]王海,毛军逵,刘方圆,陆海鹰,柴军生.叶尖间隙控制系统供气部件特性及模拟方法[J].航空动力学报,2017,32(04):932-941.DOI:10.13224/j.cnki.jasp.2017.04.019.
[35]龚迪澜,毛军逵,邓明,闫奔,王鹏飞,曾军.进气温度与压力对涡流管性能影响的实验[J].航空动力学报,2017,32(03):599-606.DOI:10.13224/j.cnki.jasp.2017.03.011.
[36]姚甜,毛军逵,蒋亮亮,单文娟,王海,柴军生,陆海鹰.涡轮集气腔流动特性研究及流阻计算模型[J].推进技术,2017,38(02):364-375.DOI:10.13675/j.cnki.tjjs.2017.02.016.
[1]毛军逵,,等.湍流乙烯扩散火焰中碳黑的数值模拟研究.重庆理工大学学报(自然科学),2019
[2]毛军逵,,等.反旋进气混合式减涡结构流动特性数值计算.航空动力学报,2019
[3]毛军逵,,等.Analysis of Oscillation Effects on HotStreak Migration Characteristics in Turbine Vane Passage.Heat Transfer Eng,2019
[4]毛军逵,,等.叶尖间隙控制系统中横流效应的试验研究.中国航天第三专业信息网第三十九届技术交流会暨第三届空天动力联合会议论文集——S05发动机热管理技术,2018
[5]毛军逵,,等.Heat transfer of impinging jet arrays on a ribbed surface.J Thermophys Heat Transfer,2018
[6]毛军逵,,等.Experiment on influences of inlet temperature and pressure on vortex tube's performance.Hangkong Dongli Xuebao,2017
[7]毛军逵,,等.The Interactions of Turbine Hot Streak and Leakage Flow from the Inter-Platform Gap.Heat Transfer Eng,2019
[8]毛军逵,Zhang, Yang,Zhang, Yang等.Numerical Study of Suspending Tube Heat Transfer Unit for a Blade Tip Clearance Control System.Tuijin Jishu,2019
[9]毛军逵,,等.Study of a Cooling Feed Pipe with a Covering Plate on a Ribbed Turbine Case.J. Eng. Gas Turbines Power,2019
[10]毛军逵,,等.Numerical calculation of flow characteristics of hybrid vortex reduce structure combing de-swirl inlet.Hangkong Dongli Xuebao,2019
[11]毛军逵,,等.叶尖间隙控制系统悬浮管换热单元数值研究.推进技术,2018
[12]毛军逵,,等.Experimental Investigation on Flow Characteristics of Turbine Plenum Chamber and Flow Resistance Model.Tuijin Jishu,2017
[13]毛军逵,,等.Experiment on surface heat transfer characteristic of high rib in high pressure turbine casing.Hangkong Dongli Xuebao,2017
[14]毛军逵,毛军逵,毛军逵等.Alkaline metal doped strontium cobalt ferrite perovskites as cathodes for intermediate-temperature solid oxide fuel cells.INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2018
[15]毛军逵,,等.Numerical study on the effect of casing radiative heating on active clearance control system.ICCHM2T2017,2017
[16]毛军逵,毛军逵,毛军逵等.The Interactions of Turbine Hot Streak and Leakage Flow from the Inter-Platform Gap
[17]毛军逵,,等.涡轮集气腔流动特性研究及流阻计算模型.推进技术,2017
[18]毛军逵,,等.进气温度与压力对涡流管性能影响的实验.航空动力学报,2017
[19]毛军逵,,等.带横流非均匀冲击/气膜复合冷却特性试验研究.南京航空航天大学学报,2017
[20]毛军逵,,等.高压涡轮机匣加强肋表面换热特性试验.航空动力学报,2017
京公网安备 11010802027423号