Yu, Aibing - Monash University - Chemical and Biological Engineering

个人简介

Professor Aibing Yu specialises in process metallurgy, obtaining BEng in 1982 and MEng in 1985 from Northeastern University, PhD in 1990 from the University of Wollongong, and DSc in 2007 from the University of New South Wales (UNSW). After two years as Postdoc Fellow with CSIRO Division of Mineral and Process Engineering (90-91), he was with UNSW as Lecturer (92-95), Senior Lecturer (95-97), Associate Professor (98-01), Professor (01-14) and Scientia Professor (07-14). In May 2014, he joined Monash University as Vice-Chancellor’s Professorial Fellow, Pro Vice-Chancellor and President of Monash-Southeast University Joint Research Institute (later changed to Monash Suzhou). He has been Inaugural Director of UNSW Centre for Simulation and Modelling of Particulate Systems (01-07), Deputy Director of ARC Centre of Excellence for Functional Nanomaterials (08-10), Founding Director of Australia-China Joint Research Centre for Minerals, Metallurgy and Materials (13-15), and ARC Research Hub for Computational Particle Technology (16-). He has received numerous prestigious awards including UNSW Scientia Professorship, ARC Federation Fellowship, NSW Scientist of the Year, and AAS Ian Wark Medal and Lecture. He is a Fellow of Australian Academy of Science (AAS), Australian Academy of Technological Sciences and Engineering (ATSE), Royal Society of New South Wales (RSNSW), and Institution of Chemical Engineers (IChemE). He is also a Foreign Academician of the Chinese Academy of Engineering (CAE).

研究领域

Powder/particle technology Particle characterisation and data interpretation Particle packing characteristics and porosity prediction Particle-structure-property relations Nanoparticles and application Solids flow and segregation Fluid flow, heat and mass transfer in packed and fluidised beds Processing and handling of bulk/particulate materials Simulation of particulate systems Interfacial engineering in multiphase processes Physical and mathematical modelling of particulate and multiphase processes Industrial application

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Ag/VO2/Ag sandwich nylon film for smart thermal management and thermo-responsive electrical conductivity Peng, L., Shen, L., Fan, W., Liu, Z., Qiu, H., Yu, A. & Jiang, X., 2 Feb 2021, (Accepted/In press) In: Journal of Industrial Textiles. 21 p. An assessment of the mathematical models for estimating the coordination number of the packing of multisized particles Yi, L. Y., Zou, R. P., Pinson, D., Dong, K. J. & Yu, A. B., Feb 2021, In: Powder Technology. 379, p. 58-68 11 p. A new correlation for heat transfer in particle-fluid beds Qi, Z. & Yu, A. B., Dec 2021, In: International Journal of Heat and Mass Transfer. 181, 17 p., 121844. A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process Li, E. L., Wang, L., Yu, A. B. & Zhou, Z. Y., Mar 2021, In: Powder Technology. 381, p. 298-312 15 p. CFD-DEM analysis of hydraulic conveying bends: interaction between pipe orientation and flow regime Zhou, M., Kuang, S., Xiao, F., Luo, K. & Yu, A., Nov 2021, In: Powder Technology. 392, p. 619-631 13 p. CFD-DEM study of particle-fluid flow and retention performance of sand screen Ismail, N. I., Kuang, S. & Yu, A., 22 Jan 2021, In: Powder Technology. 378, p. 410-420 11 p. CFD modeling and analysis of particle size reduction and its effect on blast furnace ironmaking Jiao, L., Kuang, S., Liu, L., Yu, A., Li, Y., Mao, X. & Xu, H., 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, p. 138-155 18 p. Computational simulation of air-side heat transfer and pressure drop performance in staggered mannered twisted oval tube bundle operating in crossflow Khan, M. S., Zou, R. & Yu, A., Mar 2021, In: International Journal of Thermal Sciences. 161, 16 p., 106748. Continuum modelling of granular segregation by coupling flow rheology and transport equation Yang, L. Y. M., Zheng, Q. J., Bai, L. & Yu, A. B., 22 Jan 2021, In: Powder Technology. 378, p. 371-387 17 p. Dynamic analysis of poured packing process of ellipsoidal particles Li, C. X., Gan, J. Q., Pinson, D., Yu, A. B. & Zhou, Z. Y., Jun 2021, In: Powder Technology. 385, p. 444-454 11 p. Effect of vibration mode on self-assembly of granular spheres under three-dimensional vibration Amirifar, R., Dong, K., Zeng, Q., An, X. & Yu, A., Mar 2021, In: Powder Technology. 380, p. 47-58 12 p. Effects of spreader geometry on powder spreading process in powder bed additive manufacturing Wang, L., Yu, A., Li, E., Shen, H. & Zhou, Z., May 2021, In: Powder Technology. 384, p. 211-222 12 p. Experimental study on conveying characteristics of a novel top-discharge blow tank for fine cohesive powders Zhu, H., Xu, H., Zhong, W. & Yu, A., Feb 2021, In: Powder Technology. 379, p. 335-344 10 p. Experimental tests on co-firing coal and biomass waste fuels in a fluidised bed under oxy-fuel combustion Liu, Q., Zhong, W., Tang, R., Yu, H., Gu, J., Zhou, G. & Yu, A., 15 Feb 2021, In: Fuel. 286, Part 1, 14 p., 119312. GPU-based DEM simulation for scale-up of bladed mixers Herman, A. P., Gan, J. & Yu, A., Apr 2021, In: Powder Technology. 382, p. 300-317 18 p. How stars are packed in the universe: a comparison with sphere packing Wang, C. C., Dong, K. J., Zou, R. P. & Yu, A. B., Mar 2021, In: Powder Technology. 381, p. 224-228 5 p. Numerical investigation of deposition mechanism in three mouth–throat models Huang, F., Zhang, Y., Tong, Z. B., Chen, X. L., Yang, R. Y. & Yu, A. B., 22 Jan 2021, In: Powder Technology. 378, Part A, p. 724-735 12 p. Numerical investigation of oxygen-enriched operations in blast furnace ironmaking Nie, H., Li, Z., Kuang, S., Yan, L., Zhong, W., Yu, A., Mao, X. & Xu, H., 15 Jul 2021, In: Fuel. 296, 20 p., 120662. Numerical investigation on effect of particle aspect ratio on the dynamical behaviour of ellipsoidal particle flow Hossain, M., Zhu, H. P. & Yu, A. B., 2021, In: Journal of Physics: Condensed Matter. 33, 45, 15 p., 455102. Numerical prediction on the minimum fluidization velocity of a supercritical water fluidized bed reactor: effect of particle size distributions Zhang, H., Huang, Y., An, X., Yu, A. & Xie, J., Sep 2021, In: Powder Technology. 389, p. 119-130 12 p. Numerical simulation of 3D asymmetric inner states of an ironmaking blast furnace resulting from tuyere closure Jiao, L., Kuang, S., Li, Y., Mao, X., Xu, H. & Yu, A., Aug 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, p. 2642–2658 17 p. Numerical simulation of solid flow and segregation in a blast furnace by coupling granular rheology and transport equation Yang, L. Y. M., Zheng, Q. J. & Yu, A. B., 12 Oct 2021, In: Chemical Engineering Science. 242, 15 p., 116741. Numerical simulation of the pilot-scale high-density circulating fluidized bed riser Wang, M., Lan, X., Wang, C., Gao, J., Yu, A. & Kuang, S., 11 Feb 2021, In: Industrial and Engineering Chemistry Research. 60, 7, p. 3184–3197 14 p. On the relationships between structural properties and packing density of uniform spheres An, X. Z., Dong, K. J., Yang, R. Y., Zou, R. P. & Yu, A. B., Aug 2021, In: Powder Technology. 388, p. 139-148 10 p. Optimised curved hoppers with maximum mass discharge rate – an experimental study Huang, X., Zheng, Q., Yu, A. & Yan, W., 2 Jan 2021, In: Powder Technology. 377, p. 350-360 11 p. Particle–pore scale modelling of particle–fluid flows Wu, Y., Hou, Q., Qi, Z. & Yu, A., 18 May 2021, In: Chemical Engineering Science. 235, 16 p., 116500. Particle shape-induced axial segregation of binary mixtures of spheres and ellipsoids in a rotating drum He, S. Y., Gan, J. Q., Pinson, D., Yu, A. B. & Zhou, Z. Y., 18 May 2021, In: Chemical Engineering Science. 235, 18 p., 116491. Process simulation on atomization and evaporation of desulfurization wastewater and its application Ye, X., An, X., Zhang, H., Wang, S., Guo, B. & Yu, A., Sep 2021, In: Powder Technology. 389, p. 178-188 11 p. Size segregation of granular materials during Paul-Wurth hopper charging and discharging process Zhang, T. F., Gan, J. Q., Yu, A. B., Pinson, D. & Zhou, Z. Y., 22 Jan 2021, In: Powder Technology. 378, p. 497-509 13 p. Tunable syngas production from two-stage sorption-enhanced steam gasification of sewage sludge Yang, X., Kan, T., Kheradmand, A., Xu, H., Strezov, V., Yu, A. & Jiang, Y., 15 Jan 2021, In: Chemical Engineering Journal. 404, 8 p., 126069.