解德 - 华中科技大学 - 船舶与海洋工程学院

个人简介

科研项目：主持, "船体结构断裂强度分析的直接计算法研究", 国家自然科学基金面上项目, 2011年主持, "冶金过程反应动力学研究－铁水预处理工艺系统", 武汉钢铁(集团)公司, 2010年主持, "可扩展的有限元分析通用软件平台技术集成", 湖北省自然科学基金面上项目, 2010年主持, "高韧性管线钢断裂特性的实验研究与数值模拟", 武汉钢铁(集团)公司, 2009年主持, "XXX橡胶体裂纹开裂对其力学性能的影响分析", 横向, 2009年主持, "船舶与海洋结构物控制断裂构型设计的初步研究", 教育部留学回国人员基金, 2008年以下为2007年以前的主要科研经历 Research Fellow, "Computational and Experimental Schemes for Modeling Adhesive Bonded Structures", USCAR/DOE Research Fellow, "Static and Dynamic Fracture of Carbon Fiber Reinforced Composites", USCAR/DOE Research Assistant, "Development and Enhancement of Research Capability for Aircraft Structures and Materials", NASA/EPSCoR 主持, "轿车用钢板冲压级别评定及科学使用", 武汉市"晨光计划"青年学者资助主持, "武钢产汽车用钢板的冲压成型性评价与分类研究", 武汉钢铁(集团)公司主持, "大型钢结构焊接残余应力消除技术研究与应用", 武汉钢铁(集团)公司学术专著： 02 解德, 钱勤, 李长安,著《断裂力学中的数值计算方法及工程应用》, ISBN: 978-7-03-025167-1, 科学出版社, 北京, 2009年（ 2008年度"国家科学技术学术著作出版基金"资助出版） 01 刘再华, 解德, 王元汉, 李连常,《工程断裂动力学》, ISBN: 7-5609-1240-0, 华中理工大学出版社, 武汉, 1996年

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

054 刘元丹, 熊治国, 刘敬喜, 解德, 基于AQWA的旁靠油轮水动力相互作用研究, 舰船科学技术, 2012(34)5: 13-22. 053 曾巍, 付强, 解德, 爆炸消除焊接残余应力的数值模拟, 舰船科学技术, 2011(33)11: 7-12. 052 宋杨, 刘微, 程哲, 解德, 海洋平台T型管节点应力集中系数研究, 船海工程, 2011(40)6: 121-124. 051 刘敬喜, 姜薇, 唐永生, 解德, 船舶典型构件裂纹扩展模拟及分析, 华中科技大学学报(自然科学版), 2011(39)4: 110-113. 050 付强, 解德, 工程结构用钢屈强比分析与探讨, 固体力学学报, 2011(32)S1: 314-317. 049 戴澍, 解德, 基于ABAQUS的小尺度桩柱波浪力计算方法, 固体力学学报, 2011(32)S1: 288-295. 048 何文涛, 程哲, 张正艺, 解德, 双拉试样裂纹扩展过程中的应力强度因子计算, 固体力学学报, 2011(32)S1: 165-170. 047 令波, 程哲, 张正艺, 解德, 面内裂纹扩展问题的虚拟裂纹闭合法和离散内聚力模型, 固体力学学报, 2011(32)S1: 151-157. 046 宋杨, 程哲, 张正艺, 解德, 海洋平台X型管节点应力集中系数计算, 固体力学学报, 2010(31)S1: 238-241. 045 程哲, 张正艺, 宋杨, 解德, 橡胶材料超弹性本构模型的简化标定方法, 固体力学学报, 2010(31)S1: 50-53. 044 张正艺, 解德, 曲面上线状裂纹的虚拟裂纹闭合法公式及其断裂单元, 固体力学学报, 2010(31)S1: 44-49. 043 唐正茂, 解德, 马士虎, 船舶概念设计阶段多学科和多目标优化研究, 船舶力学, 2010(14)8: 879-886. 042 钱勤, 李长安, 解德, 李国清, 基于虚拟裂纹闭合法预测结构的疲劳裂纹扩展寿命, 2009年全国压电和声波理论及器件技术研讨会暨2009年全国频率控制技术年会, 2009. 041 Xie D and Biggers, Jr. SB, Delamination growth and residual strength of compressively loaded sandwich panels with stiffness tailored face sheets, Journal of Sandwich Structures and Materials, 11(2009):133-150. SCI: 433PY 040 张正艺, 解德, 赵耀, 刘土光, 结构尺度上三维线状裂纹扩展的数值模拟, 结构强度研究, 2008(增刊):591-594, (第十四届全国疲劳与断裂学术会议论文集, 10.20-22, 2008, 江西井冈山). 039 Xie D and Biggers, Jr. SB, Progressive damage arrest mechanism in tailored laminated plates with a cutout, Acta Mechanica Solida Sinica, 21(2008):62-72. SCI:336HO 038 Xie D, Garg M, Huang D, and Abdi, Cohesive zone model for surface cracks using finite element analysis, The 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2008-1764. Schaumburg, Illinois. April 7-10, 2008. EI: 082711352594 037 Abdi F, Xie D, Bhugaloo H, Le Bozec J, Progressive failure simulation of an aircraft fan blade impact onto engine inlet, Proceedings of COMP07: 6th International Symposium on Advanced Composites, COMP2007-009, Corfu, Greece, May 16-18, 2007. 036 Gotsis PK, Chamis CC, Kostantinos D, Xie D, and Abdi F, Progressive fracture of laminated fiber-reinforced composite stiffened plate under thermo-mechanical loads. The IXth International conference on Mesomechanics (MESO2007), Presquile de Giens, France, May 13-17, 2007. 035 Farahmand B, Saff C, Xie De, and Abdi F, Estimation of fatigue and fracture allowables for metallic materials under cyclic loading, The 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2007-2381. Honolulu, Hawaii. April 23-26, 2007. EI: 073210748020 034 Qian Q and Xie D, Analysis of mixed-mode dynamic crack propagation by interface element based on virtual crack closure technique, Engineering Fracture Mechanics, 74(2007): 807-814.SCI:136JY; EI: 070210358348 033 Xie D and Biggers, Jr. SB, Calculation of transient strain energy release rate under impact loading based on virtual crack closure technique. International Journal of Impact Engineering, 34(2007): 1047-1060. SCI:142EH; EI: 064910282236 032 Xie D, Salvi AG, Sun C, Waas AM, Caliskan A, Discrete cohesive zone model to study static fracture in 2D triaxially braided carbon fiber composites, Journal of Composite Materials, 40(2006): 2025-2046. SCI: 109XG; EI 064510219403 031 Xie D and Waas AM, Discrete cohesive zone model for mixed-mode fracture using finite element analysis zone model, Engineering Fracture Mechanics, 73(2006): 1783-1796. SCI: 076VA; EI: 06249934470 030 Xie D, Qian Z, Huang D, Abdi F, Crack growth strategy in composites under static loading, The 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2006-1842, Newport, Rhode Island, May 1-4, 2006. EI: 071610555638 029 Xie D and Waas AM, Mxed-mode fracture modeled through a discrete cohesive zone model-DCZM, in "Fracture of Nano and Engineering Materials and Structures", pp.739-740, Springer Netherlands (Proceedings of the 16th European Conference of Fracture, July 3–7, 2006, Alexandroupolis, Greece). 028 Xie D and Biggers, Jr. SB, Progressive crack growth analysis using interface element based on the virtual crack closure technique, Finite Elements in Analysis and Design, 42(2006): 977-984.SCI: 055SN; EI: 06229910070 027 Xie D and Biggers, Jr. SB, Strain energy release rate calculation for a moving delamination front of arbitrary shape based on virtual crack closure technique, Part II: Sensitivity Study on Modeling Details, Engineering Fracture Mechanics, 73(2006): 786-801. SCI:013DS; EI: 06059666974 026 Xie D and Biggers, Jr. SB, Strain energy release rate calculation for a moving delamination front of arbitrary shape based on virtual crack closure technique, Part I: Formulation and Validation, Engineering Fracture Mechanics, 73(2006): 771-785. SCI: 013DS; EI: 06059666973 025 Xie D, Chung J, Waas AM, Shahwan KW, Schroeder JA, Boeman RG, Kunc V, and Klett LB, Failure analysis of adhesively bonded structures: from coupon level data to structure level predictions and verification, International Journal of Fracture, 134(2005): 231-250. SCI:995ZA; EI: 05489503607 024 Xie D, Waas AM, Shahwan KW Schroeder JA, and Boeman RG, Fracture criteria for kinking cracks in triple material bonded joints under mixed mode loading, Engineering Fracture Mechanics, 72(2005): 2487-2504. SCI:971VA; EI 05309266179 023 Xie D, Salvi AG, Waas AM, Caliskan A, Discrete cohesive zone model to study static fracture of fiber composites, The 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA-2005-2320, Austin, Texas, April 18-21, 2005. EI: 05519593028 022 Xie D, Waas AM, Shahwan KW, Schroeder JA and Boeman RG, Computation of strain energy release rate for kinking cracks based on virtual crack closure technique, CMES: Computer Modeling in Engineering & Sciences, 6(2004): 515-524. SCI: 882BR; EI:05018773320 SCI/ESI (基本科学指标) "Emerging Research Front Paper" 021 Xie D and Biggers, Jr. SB, Postbuckling analysis with progressive damage of tailored laminated plates and shells with a cutout, Composite Structures, 59 (2003): 199–216. SCI: 636BP; EI: 03027309177 020 Biggers Jr. SB and Xie D, Damage Progression analysis in tailored laminated plates and shells with a cutout, American Society for Composites, Proceedings of 16th Annual Technical Conference, ASC Paper 136, Virginia Tech, September 9-12, 2001. 019 李荣锋, 张锦云, 解德, 铝-钢爆炸复合板的研究, 材料保护, 1999(6):31-36. 018 李立军, 解德, 东汽EQ153柴油车油底壳应变分析与选材预测, 钢铁研究,1998(2): 27-31. 017 李荣锋, 解德, 张锦云, 不锈钢爆炸复合板的性能及其复层结构的研究, 武钢技术, 1998(6):38-40. 016 Li LJ, Xie D, Wu GY, and Zhao MY, Sheet metal formability analysis and material determination, International Journal of Materials & Product Technology, 1998 (3-6): 421-426. SCI:169EL 015 赵麦英, 张家义, 谭伯聪, 解德, 李春植, 吴翔宇, 点焊试件疲劳裂纹的监测和探讨, 物理测试, 1998(05):26-29. 014 Xie D, Li LJ, Wu GY, and Zhao MY, Primary investigation on press forming process by using BHF-h diagram, Proceedings of International Conference on Automobile Materials and Press Forming, Beijing, 1997:210-214. 013 张锦云, 李荣锋, 解德, 铜/钢爆炸复合板界面层的金相分析, 钢铁研究, 1996(3):39-41. 012 解德, 谭伯聪, 李荣锋, 李福林, 爆炸法消除超厚板焊接残余应力对焊接接头力学性能的影响, 理化测试, 1996(3): 27-30. 011 李荣锋, 解德, 张锦云, 铜-钢复合板三种复合方法的比较, 武钢技术, 1995(11):49-51. 010 解德, 谭伯聪, 李荣锋, 李福林, 振动法消除16MnJ超厚钢板焊接残余应力,钢铁研究, 1995(3): 51-54. 009 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永久, 爆炸法消除超厚板焊接残余应力的工艺研究,钢铁研究, 1995(2): 36-39. 008 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永久, 爆炸处理消除焊接残余应力技术的实验研究及其工业应用, 湖北省暨武汉市焊接学会15周年论文集, 1995:358-364. 007 解德, 谭伯聪, 李荣锋, 李福林, 爆炸处理消除16MnJ超厚钢板焊接残余应力, 爆炸与冲击, 1995(1): 76-81. EI: 95032615783 006 解德, 谭伯聪, 李荣锋, 李福林, 李美堂, 孙永久, 爆炸处理消除贮氧罐焊接残余应力, 锅炉压力容器技术, 1994(3): 37-39. 005 谭伯聪, 解德, 李荣峰, 李福林, 三种典型焊接结构残余应力的消除法, 钢结构,1994,(03):153-155 004 谭伯聪, 解德, 李荣锋, 李福林, 吴佑明, 超厚钢板焊接残余应力剖析, 钢铁研究, 1993(5): 35-38. 003 谭伯聪, 解德, 王玉涛, 陈冬青, 李书瑞, 温差拉伸法在高炉平台大梁中的应用, 力学在冶金行业中的应用学术讨论会论文集, 1992: 359-363. 002 Liu ZH, Wang YH, Xie D and Ding W, Dynamic fracture analysis of stiffened panel by finite difference method, Proceedings of an International Conference on Computational Mechanics, Hong Kong, 1991: 915-920. EI: 92060510319 001 刘再华, 解德, 差分法分析加筋板动态裂纹扩展, 固体力学学报, 1991(增刊): 56-64.